Satellite A300-Y00 - How to use a joystick for Games?

How can I connect my Satellite A300/y00 with joystick so I can play games without keyboard because its very hard to use?
Which one should i get, ps2 alike joystick or xbox joystick since xbox for microsoft and im using microsoft software such vista...??
But my laptop has something called game controller in control panel, does it mean i still install the software in order to use the joystick??
Thanx

Hi Mickey
I see youve got many questions and most questions can be answered by device (joystick) manufacturer
The point is that most gamepads or joysticks can be connected to USB port (like USB mouse). In most cases its not necessary to install any drivers because its a plug-and-play device (simply connect and use)
But different manufacturers provides own drivers together with the own products
In such cases such drivers should be installed too

Similar Messages

How to use a joystick on the local side to control a robot remotely connected by FP2000 .

Hi All,
Does anyone know how to use a joystick to teleoperate a robot on the remote side.
The robot is connected to the Field point FP2000 RT module and hooked to the internet.
I can use web publish to publish the control to the local side and control the robot by
changing the control value on the picture. Howerer, I have no idea about how to connect the
joystick on the local compurer to the remote FP rt system. It seems I need to initionalized a communication
between them. Does any one have the same experiences??
Ta. Shih

What you will probably need to do is write a seperate program which will run on the PC and send commands to the program running on the FP.
You can read the joystick data with the VIs in the Advanced>>Input palette and you can communicate with your program by using a simple protocol over a TCP connection. You can find some examples in the example finder (Help>>Find Examples) by searching for TCP. You can also find an example here and here. The protocol itself is up to you and can probably be fairly simple.
Message Edited by tst on 02-15-2006 08:20 PM
Try to take over the world!

Satellite A300-Y00 black screen but fan starting

I bought a TOSHIBA satellite A300/Y00 in June 2008, i.e. 16 months ago. Model number PSAGOA-02Y. After ten months it suddenly did not boot. It sounds like the CPU and the fan is starting but the screen and the led below the screen were all black. I tried to connect it to an external monitor but that screen was black too. I gave it to Toshiba for 2 weeks (!) who said it was the motherboard. They replaced it for free as it was still under warranty.
A few weeks ago the same thing happened again. I turned it off and for some random reason it started as usual a few hours later. I called Toshiba to say that I think the computer will crash soon again. They said they could take it in for service but if they could not find anything wrong with it they would charge me x dollars. I did not give it in for service. I even went to a local Toshiba support guy who said he could not find anything wrong with my computer and that there was nothing he could do.
Now the same thing is happening again. This time I can't get it to start again. Of course their fantastic 3 months warranty for the last motherboard has expired. I tried to take out the battery and start it only on power but it does not help.
I don't want to pay $500 for a new motherboard and then have it breaking down again. It is obvious it is a hardware problem and I think Toshiba should replace my computer without charges.
Anyone with similar problems? Any advice? Getting pretty annoyed....

Hello!
Have you already contacted the authorized service provider again? If not, do it please! You should speak with the technicians again and then you will see what they can do for you.
I can understand you that this is annoyed but such things can happen and I think the ASP will do the best to help you. To be honest I have good experience with my ASP. The repair goes very fast and the technicians are very friendly and competent. Its always nice to talk with them a little bit.
Im not a technician but maybe they can repair it as a gesture of goodwill or you have only to pay the mainboard and not the exchange
Greets

How to use Batch operation for two xsodata services?

Hi All,
I have two xsodata services. How to use submit batch for two xsodata services
Thanks,
Mj

Gateway Batch Calls from SAPUI5

How to use same actions for differ pop-up

Hi gurus,
I am using 2 popup in a view.same popup's having same buttons 'Yes', 'No'.when i use 1st one i have to create an action for that Yes button where i put my code for that particular Action.
But when i used 2nd one the action define for that is not acceptable with differ name.it takes only standard one.
Now my Query is : How to use same actions for differ pop-up buttons with in a similar view?Where i put my code.
Plz sugges me.
<b>Points will be sured.</b>
Sanket sethi

Hi,
Take one integer value attribute in the context of view
when you r performing action on POP1 set it's value to 1
when you r performing action on POP2 set it's value to 2
create one method which receives integer argument, say diaplay(int a)
In the action call display(wdContext.currentContextElement().get<intvariable>()) by passing the value in the context attribute
in display() method, Check the value of integer variable..
if it is 1 then perform action related to POP1
if it is 2 then perform action related to POP2
Regards
LakshmiNarayana

How to use same actions for differ pop-up buttons

Hi gurus,
I am using 2 popup in a view.same popup's having same buttons 'Yes', 'No'.when i use 1st one i have to create an action for that Yes button where i put my code for that particular Action.
But when i used 2nd one the action define for that is not acceptable with differ name.it takes only standard one.
Now my Query is : How to use same actions for differ pop-up buttons with in a similar view?Where i put my code.
Plz sugges me.
<b>Points will be sured.</b>
Sanket sethi

Hi ,
u can use the method SUBSCRIBE_TO_BUTTON_EVENT of the IF_WD_WINDOW interface ... to handle the event fired by the popup .....used this method after creating the popup window ...
regards
Yash

How to Use PM BAPI for equipment Master upload : BAPI_EQUIPMENT_SAVEREPLICA

Hi ,
How to use PM BAPI for equipment Master upload : BAPI_EQUIPMENT_SAVEREPLICA.
May i know what are the input parameters & fields mandatory
for each Table structures ct_data , ct_datax , it_descript , it_longtext.
Can any one explain me Step by Step Process.
B'cos i tried with below code. Equipment is not getting created.
wa_itab-equipment_ext = '000000000100000001'.
wa_itab-descript      = 'Test 2 -> Lube Oil Pump'.
wa_itab-text_language = 'EN'.
wa_itab-sdescript     = 'Short Description'.
APPEND wa_itab TO it_itab.
CLEAR wa_itab.
LOOP AT it_itab INTO wa_itab.
    ct_data-ta_guid       = '000000000000000001'.
    ct_data-equipment_ext = wa_itab-equipment_ext.
    ct_data-descript      = wa_itab-descript     .
    ct_data-valid_date    = sy-datum.
    ct_data-equicatgry    = 'M'.
    APPEND ct_data.
    CLEAR ct_data.
    ct_datax-ta_guid       = '000000000000000001'.
    ct_datax-equipment_ext = 'X'.
    ct_datax-equipment     = 'X'.
    APPEND ct_datax.
    CLEAR ct_datax.
    it_descript-ta_guid       = '000000000000000001'.
    it_descript-text_language = wa_itab-text_language.
    it_descript-descript      = wa_itab-sdescript    .
    APPEND it_descript.
    CLEAR it_descript.
    it_longtext-ta_guid        = '000000000000000001'.
    it_longtext-text_language = wa_itab-text_language.
    it_longtext-text_id        = 'LTXT'.
    it_longtext-text_line      = 'SSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSS'.
    APPEND it_longtext.
    CLEAR it_longtext.
    it_longtext-ta_guid        = '000000000000000001'.
    it_longtext-text_language = wa_itab-text_language.
    it_longtext-text_id        = 'INTV'.
    it_longtext-text_line      = 'aaaaaaaaaaaaaaa'.
    APPEND it_longtext.
    CLEAR it_longtext.
    it_longtext-ta_guid        = '000000000000000001'.
    it_longtext-text_language = wa_itab-text_language.
    it_longtext-text_id        = 'INTV'.
    it_longtext-text_line      = 'bbbbbbbbbbbb'.
    APPEND it_longtext.
    CLEAR it_longtext.
    it_longtext-ta_guid        = '000000000000000001'.
    it_longtext-text_language = wa_itab-text_language.
    it_longtext-text_id        = 'INTV'.
    it_longtext-text_line      = 'cccccccccccccccc'.
    APPEND it_longtext.
    CLEAR it_longtext.
    CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.
call BAPI-function in this system
    CALL FUNCTION 'BAPI_EQUIPMENT_SAVEREPLICA'
      TABLES
        ct_data     = ct_data
        ct_datax    = ct_datax
        it_descript = it_descript
        it_longtext = it_longtext
        return      = return
      EXCEPTIONS
        OTHERS      = 1.
    IF sy-subrc = 0.
      CALL FUNCTION 'BAPI_TRANSACTION_ROLLBACK'.
      WRITE : 'Successful'.
    ENDIF.
    IF NOT return IS INITIAL.
      LOOP AT return.
        IF return-type = 'A' OR return-type = 'E'.
          WRITE : 'Error'.
        ENDIF.
      ENDLOOP.
    ENDIF.
    REFRESH return.
ENDLOOP.
Regards
SUrendar

Hi ,
How to use PM BAPI for equipment Master upload : BAPI_EQUIPMENT_SAVEREPLICA.
May i know what are the input parameters & fields mandatory
for each Table structures ct_data , ct_datax , it_descript , it_longtext.
Can any one explain me Step by Step Process.
B'cos i tried with below code. Equipment is not getting created.
wa_itab-equipment_ext = '000000000100000001'.
wa_itab-descript      = 'Test 2 -> Lube Oil Pump'.
wa_itab-text_language = 'EN'.
wa_itab-sdescript     = 'Short Description'.
APPEND wa_itab TO it_itab.
CLEAR wa_itab.
LOOP AT it_itab INTO wa_itab.
    ct_data-ta_guid       = '000000000000000001'.
    ct_data-equipment_ext = wa_itab-equipment_ext.
    ct_data-descript      = wa_itab-descript     .
    ct_data-valid_date    = sy-datum.
    ct_data-equicatgry    = 'M'.
    APPEND ct_data.
    CLEAR ct_data.
    ct_datax-ta_guid       = '000000000000000001'.
    ct_datax-equipment_ext = 'X'.
    ct_datax-equipment     = 'X'.
    APPEND ct_datax.
    CLEAR ct_datax.
    it_descript-ta_guid       = '000000000000000001'.
    it_descript-text_language = wa_itab-text_language.
    it_descript-descript      = wa_itab-sdescript    .
    APPEND it_descript.
    CLEAR it_descript.
    it_longtext-ta_guid        = '000000000000000001'.
    it_longtext-text_language = wa_itab-text_language.
    it_longtext-text_id        = 'LTXT'.
    it_longtext-text_line      = 'SSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSS'.
    APPEND it_longtext.
    CLEAR it_longtext.
    it_longtext-ta_guid        = '000000000000000001'.
    it_longtext-text_language = wa_itab-text_language.
    it_longtext-text_id        = 'INTV'.
    it_longtext-text_line      = 'aaaaaaaaaaaaaaa'.
    APPEND it_longtext.
    CLEAR it_longtext.
    it_longtext-ta_guid        = '000000000000000001'.
    it_longtext-text_language = wa_itab-text_language.
    it_longtext-text_id        = 'INTV'.
    it_longtext-text_line      = 'bbbbbbbbbbbb'.
    APPEND it_longtext.
    CLEAR it_longtext.
    it_longtext-ta_guid        = '000000000000000001'.
    it_longtext-text_language = wa_itab-text_language.
    it_longtext-text_id        = 'INTV'.
    it_longtext-text_line      = 'cccccccccccccccc'.
    APPEND it_longtext.
    CLEAR it_longtext.
    CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.
call BAPI-function in this system
    CALL FUNCTION 'BAPI_EQUIPMENT_SAVEREPLICA'
      TABLES
        ct_data     = ct_data
        ct_datax    = ct_datax
        it_descript = it_descript
        it_longtext = it_longtext
        return      = return
      EXCEPTIONS
        OTHERS      = 1.
    IF sy-subrc = 0.
      CALL FUNCTION 'BAPI_TRANSACTION_ROLLBACK'.
      WRITE : 'Successful'.
    ENDIF.
    IF NOT return IS INITIAL.
      LOOP AT return.
        IF return-type = 'A' OR return-type = 'E'.
          WRITE : 'Error'.
        ENDIF.
      ENDLOOP.
    ENDIF.
    REFRESH return.
ENDLOOP.
Regards
SUrendar

How to use Web Serivce for not jsr 172 phone

Hi:
Is anyone know, how to use web service for phones that only have standard J2ME package installed (without jsr 172 web service packagenstalled)?
thank you

Hi,
I think you need to write the code for this from scratch (built on top of existing HTTP functionality). There may be open-source J2ME code you could use. I've never tried this so I'm afraid I don't know any more. But maybe that is what you were asking... i.e. does anyone have code that does this already...
Tx,
Sam

How to use 2 GL for loss made on asset retirement w/o revenue ?

how to use 2 GL for loss made on asset retirement w/o revenue.
hello everyone
i have some trouble.
my company want to use 2 GL account for asset retirement
example some time use GL 6500001 some time use 6500002
in standard configuration AO90 , field loss made on asset retirement w/o revenue, there is only one field.
so i can use only one G/L.
it' s not good if i must to change configuration (and transport request )every time that user need to change GL.
now i got one idea.
i know that table T095 keep account determinaton and GL account data.
so if i make program that change data from table T095 directly. i donot need to change config everytime.
but i am not sure that this way will make impact other standard program or not.
i will wait for better idea from everyone.
please help.

Substitution consist of several steps each with two parts:
1- Prerequisite
2- Replacement
If the prerequisite is satisfied (TRUE), substitution (Replacement) is performed.
Transaction Code: OBBH.
Thank you
Javed

Explain how to use standard LSMW for MM01

Can anyone explain how to use standard LSMW for MM01 Tcode.pls explain briefly.

Hi
Create a project using 0020 as method.
Max

How to use content conversion for Complex structure

Hi All,
I want to know how to use content conversion for the following complex structure:
Data
...Details            1 to Unbound
.....Header           1 to 1
.......HF1
.......HF2
.......HF3
.......ITEM           1 to unbound
.........ITF1
.........ITF2
all are of type string.
Thanks & Regards,
Viswanath
Message was edited by: Viswanath Mente

Hi,
In the content conversion,
give ur
1.document name as message type
2.give ur recordstructure as Details,,Header,1,ITEM,
3.mention ur keyfield.
conversion parameter
Header.fieldFixedLength - give the field lengths
Header.fieldNames=mention all the field name
Header.keyField=enter the value of keyfield
Header.endSeparator='nl'
repeat the same for Item
regards
jithesh

How to use java api for function activity in embed oracle workflow?

because i can't install standalone oracle workflow successfully.
pls tell me how to use java api for function activity in embed oracle workflow?
are there some patch or pulg-in package?
ths a lot...........

The Java Function Activity Agent is not certified for Oracle Workflow embedded in Oracle Applications. Installing standalone workflow should be a lot easier than what you have found, although it looks like you did hit a Pentium 4 issue with the Oracle Universal Installer. I suggest you contact Oracle Support or Oracle Consulting for assistance.
because i can't install standalone oracle workflow successfully.
pls tell me how to use java api for function activity in embed oracle workflow?
are there some patch or pulg-in package?
ths a lot...........

I want to know that i have recently create an apple id, i want to know that how i can use this id for gsx(without paid) or how to use this id for knowlaged

i want to know that i have recently create an apple id, i want to know that how i can use this id for gsx(without paid) or how to use this id for knowlaged
pls give braef intro about all this things, i have searched on sites but i am not getting exact thing and meaning pls help
and i wnat to complete hardware exam of mac what should i do
thanks
vicckey

GSX, if you're referring to Apple's service by that name, is available only to employees of Apple-authorized service providers or self-servicing accounts. Unless you are employed by such an organization, you cannot access GSX. If you are employed by such an organization, they should set you up and give you the appropriate login information.
If you are interested in becoming a certified Apple hardware technician, you can find information here:
http://training.apple.com/certification/acmt
Please note, though, that certification does not in and of itself give you access to any of the Apple resouces for support organizations; diagnostic tools, parts ordering, etc. You again must be employed by an authorized Apple support provider before you can gain such access.
I have no idea what "knowlaged" might be.
Regards.

How to use a dictionary for multi languages when displaying mess

how to use a dictionary for multi languages when displaying messages??

1st you have to define new messages in the dictionary:-
1.     We have to open the application.
2.     Functional administrator responsibility.
3.     Core services.
4.     Messages.
•     Create message button.
•     Now fill the name of the message that we want to call it from our code in the Code field.
•     Fill the application name with short name of the application.
•     Choose the language.
•     Set the text you want to be displayed.
2nd, Now in the CO in the in the process form request you will code throw new OAException ("application short name","Code").
Now run and see the result.
3rd we want to use Arabic messages, use the same one you have created for saving as an example but you choose duplicate and set the language Arabic.
•     Run the page.
•     Choose preferences.
•     Current Session language = Arabic.
Now you can see the result.

How to use Bapi BAPI_ACC_DOCUMENT_POST for g/l account document posting

Hi all,
I am using BAPI_ACC_DOCUMENT_POST bapi for g/l account documents posting.as I am first time using BAPI in my program.can anyone give details about how to use this BAPI for document postings.what importing parameters need to be passed , which exporting parameters need to be passed and which tables need to be used.
Thanks in advance.
Regards,
Harshada

Moderator message - Please search before asking - post locked
Rob

Satellite A300-Y00 - How to use a joystick for Games?

Similar Messages

Maybe you are looking for