Satellite A300D-16N: sound like metalic with a lot of cracks

hallo!
I've upgraded lately from Vista 32bit to Win 7 32 bit on my Satellite A300D-16n.
Now I have some sound problems - it sounds like metalic with a lot of cracks.
I've upgraded my Bios and sound driveres, graphics and wifi are also as latest as win7 says
It seams that there is some kind of conflict beetwen drivers or problem with sound oversteering
I don't know how to fix this.
Can You help ??

> Few days ago I've uninstalled the soundcard and reinstalled it again, the sound was quite ok till next reboot.
Well, maybe the Windows OS has taken the old driver
The driver is from Conexant
Check the newest Conexant sound driver released for other notebooks; i.e Satellite L650D
[Sound Driver 4.111.0.64|http://eu.computers.toshiba-europe.com/innovation/download_driver_details.jsp?service=EU&selCategory =2&selFamily=2&selSeries=178&selProduct=5405&selSh ortMod=null&language=13&selOS=all&selType=42&yearu pload=&monthupload=&dayupload=&useDate=null&mode=a llMachines&search=&action=search&macId=&country=al l&selectedLanguage=13&type=42&page=1&ID=74554&OSID =30&driverLanguage=42 ]

Similar Messages

  • Satellite M60-171 sounds like echo-well

    Hello,
    My satellite M60-171 sounds like an echo-well. Reinstalling the drivers does not seem to fix the problem (problem hasn't always been there and no I have no idea since when this problem occurs...)
    The sound itself isn't bad at all; but the echo in every sound it makes is anoying....
    Suggestions ?
    Greetz,
    Peter

    Hi
    Did you try to make system restore to earlier time? Maybe it will solve this in short time and you must not waste your time searching around und check all available options.

  • My iphone 4 started making a sound like "boing" with a vibration/ wobbly sound.  It does it at least once a day.  I've reset my phone, used icloud to restore, and it made the sound again upon startup.  Help!  This is so annoying.

    My iphone 4 started making a sound like a "boing" with a vibration/ wobbly sound.  It does this at least once a day.  It started about a month ago.  Anyone got any ideas?

    Mine does this also, seemingly randomly several times throughout the day.  I do not have this sound as any of my alerts and it does not seem to denote anything like a message, reminder, etc.  I do have "Trapster" on my phone and I went in and tweaked the settings there.  Will repost if that has any efect.

  • Satellite A300D No sound from headphones

    Hi people,
    I cant hear music with the headphones (or external loudspeakers) as I used.
    Windows Vista
    Model A300D-13R
    Sound is coming from my heaphones but only the test sound (Control panel --> Audio sistem --> Headphones --> Test OK)
    But when playing music with the headphones connected music continue comingo out from the laptop loudspeakers.
    I checked everything:headphones are ok, sound on control panel is ok. Out of headphone nothing, anyway.
    What can I do?
    Thanks a lot
    Luis
    [email protected]

    Have you tested different music players and headphones?
    Im not sure but maybe you can also set different sound outputs in players.
    Furthermore I would make a sound driver update.
    Visit the Toshiba European website and search for an update:
    http://eu.computers.toshiba-europe.com
    And make sure that all sound settings are really correct.

  • Satellite A300-1J1 - Sound not working with Windows XP

    I have a problem, Yesterday I've installed WindowXP on my Toshiba Satellite A300 1J1, but no sound!
    I tried all Toshiba driver sound given on Toshiba web site but no result !
    Some can help us?

    Hello
    Your notebook has a Realtek sound chip. So you must install a Hotfix from Microsoft before you can install the drivers.
    Check these links:
    http://support.microsoft.com/kb/835221
    http://support.microsoft.com/kb/888111
    Greets

  • Satellite A300D - No sound through headphones automatically

    Hi,
    i have a problem with my headphones.
    When i listen a song for example from the speakers and i plug in my headphones, the sound does not trasport to my headphones automatically.
    I still hear the song from the speakers...
    if i close the media player for example and then i plug in the headphones and i open again the media player then i hear the song throw my headphones... and if i put out the plug in (while i listen to the music) then i cannot even hear thes song and the media players stops.
    I would appreciate it if someone can help me..
    Thank you for your time.

    Hi!
    Do you have this issue only with media player or other music player too?
    As Akuma said you should try to update the sound driver and BIOS. Both you can find on the Toshiba European driver download page:
    http://eu.computers.toshiba-europe.com => Support & Downloads => Download Drivers
    And what OS do you use? Make sure that you have all Service Packs and Hotfixes installed. Before you send it to an ASP you should reinstall the notebook with the Toshiba recovery disk. So you can test it with factory settings.
    Bye

  • Satellite L645D-S4025 Does not boot with USB

    I have a Satellite L645D-S4025 that I have had for a little less than a year. Recently, the laptop will stay on the Toshiba splash screen when booting if there is something plugged into the USB slots. If I remove the items, the laptop will boot immediately to Windows and work fine. This occurs whether I am rebooting or booting from scratch.
    Any thoughts?

    Satellite L645D-S4025
    Sounds like the boot order needs to be adjusted. You should be able to do this from within Windows.
       Start > All Programs > TOSHIBA > Utilities > HWSetup
    On the Boot Priority tab, move up the hard drive.
    -Jerry

  • Satellite A300D with Vista 64-bit - Drivers for Conexant High Definition

    Hi,
    I have Satalite A300D-15B AMB 64-bit notebook with Vista 64-bit installed. After I have installed Vista, it automatically took the audio drivers for sound card, but Dolby didn't work.
    I tried to install the drivers from toshiba, it fails.
    Can someone guide me how to install the Vista 64-bit drivers for Conexant High Definition Audio please......
    regards,
    Ganesh

    Hello Ganesh
    Sorry but this notebook model is not supported for Vista 64-bit and I don't know what driver installation are you writing about.
    What you can try is to download and install THIS driver.
    This is driver for Satellite A300 but this notebook has the same sound card as your Satellite A300D - Conexant CX20561.
    Please post the results.

  • Issue with recorded sound- sounds like the recordings were made underwater.

    Hi, all.
    I'm running Adobe Audition CS5.5 on a Toshiba Satellite Pro C660-1UZ with Windows 7 Home Premium installed. My machine meets all of the system requirements, as far as I can tell, and yet recordings made in Adobe Audition sound like they were made underwater.
    For reference:
    http://www.soundclick.com/player/single_player.cfm?q=hi&songID=11138745
    I'm not using an interface at present, but would be willing if there were a cheap model available.
    Thanks for any help,
    Casey

    I have a slightly older Toshiba Satellite notebook that I use for recording and mixing and I can tell you that the built in audio interface (i.e. the mni jack mic input) is worse than bad.  I can get away with it for Skype phone calls but that's about it--and even for Skype I often plug in my interface.
    The other thing going on with the sample you posted is that the levels are very low so the need to crank things up to hear anything just accentuates the noise.
    Basically, Audition just takes the signal provided by your mic and interface and doesn't affect the sound in any way until you deliberately add processing.  You really do need to invest in an interface--pretty well any two track USB devices will be a vast improvement on the Toshiba mic input. 

  • Humming sound like a ground loop with added hard drives

    I get a humming low freq Hum from my MacPro from adding or added hard drives. I am using Seagates 320's ( 3 - non raid ). The MP is under my desk and I think some may not hear what I do if sitting on a desktop.
    I can't figure out if it's a ground loop issue, more than one drive spinning at the same speed or some mechanical isssue, like metal to metal contact.
    Just one drive with the OS. The Hum if still there is not something I am aware of or bothers me. But your room must be quiet to hear ir best.

    As I mentioned before, some people will not hear the "hum" if the MP is sitting on your desk ( or one hard drive ) . Mine is under a large desk that is 6' long, which kinda amplifies the sound and creates a sound box for the low freq hum. Some what like adding a subwoofer. But when you add one or more drives it will Hum and I think I know the cause.
    One is there is no isolation ( ie rubber ) between the hard drive mounting system, the (metal) inside frame and outer (metal) case. This causes the MP to become or act like a tuning fork.
    For those who do hear the hum sound, you can take both hands on either side of the MP and "squeeze" the sides and hear the sound get lower. Take your hands off and hear it louder. So the whole MP is vibrating or creating "noise" or low freq Hum ( tuning fork) .
    The problem is some what resolved with using 2 drives if you mount one in bay 1 and the second in bay 4. ( not side by side ) In other words, the sound is amplified to a higher degree if you have matching drives ( non raid ) next to eachother.
    This issue will drive you nuts if you have it or can hear it. The MP stock 2.66 thats a month old is what I have. Maybe some other Macs don't show this same sound.
    Whats interesting is the metal case, both outer and inter being connected as a "rigid unit" is causing or lets say, making matters worse. The other of which I have not plotted the freq, I think is around 60hz which just so happens to be the same as your " AC power". So the humming could sound like a ground loop, when in fact the sound originates from the hard drive and is being magnfied by the rigid non insulated MP that might be inhancing it's own "resonate frequency"and acting like a tuning fork.
    Now if I am right and the MP is reacting as a tuning fork. What is the solution? I don't really know. And I have not tried any so called fixes other than switching bays. I have some ideas. But only those that would not cause a warrenty issue.
    I hope Apple will take a look at the issue and see if a real engineer can first identify the issue and come up with a solution.

  • Hi, My mp3s and ripped CDs sound like some weird, ring modulated alien metallic 'thing'

    Hi, My mp3s and ripped CDs sound like some weird, ring modulated alien metallic 'thing' since installing 10.5, purchases sound fine, and the original files are not corrupted, but CDs are burned with the same distortion, please help! Thank you.

    Okay it seems i'm not alone, just the read the previous ongoing thread about this and will be rolling back to 10.4 to cure it. .

  • I had a repair done on my MacBook Pro and had to have a new hard drive installed. The Apple Auth Repair Shop then updated the OS from 10.6.8 to 10.7.5. Now my iPhoto v 9.2.3 will not open and it sounds like it will not work with this OS. Can you plea

    I had a repair done on my MacBook Pro and had to have a new hard drive installed. The Apple Auth Repair Shop then updated the OS from 10.6.8 to 10.7.5. Now my iPhoto v 9.2.3 will not open and it sounds like it will not work with this OS. Can you please advise?

    You may need many other updates to retain compatibility with Lion. I suggest you reinstall Snow Leopard. Unfortunately, you will need to erase the drive first. Be sure to backup your data if you haven't done so already.
    Clean Install of Snow Leopard
    Be sure to make a backup first because the following procedure will erase
    the drive and everything on it.
         1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
             with your computer.  Insert the disc into the optical drive and restart the computer.
             After the chime press and hold down the  "C" key.  Release the key when you see
             a small spinning gear appear below the dark gray Apple logo.
         2. After the installer loads select your language and click on the Continue
             button. When the menu bar appears select Disk Utility from the Utilities menu.
             After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
             size.)  Click on the Partition tab in the DU main window.  Set the number of
             partitions to one (1) from the Partitions drop down menu, click on Options button
             and select GUID, click on OK, then set the format type to MacOS Extended
             (Journaled, if supported), then click on the Apply button.
         3. When the formatting has completed quit DU and return to the installer.  Proceed
             with the OS X installation and follow the directions included with the installer.
         4. When the installation has completed your computer will Restart into the Setup
             Assistant. After you finish Setup Assistant will complete the installation after which
             you will be running a fresh install of OS X.  You can now begin the update process
             by opening Software Update and installing all recommended updates to bring your
             installation current.
    Download and install Mac OS X 10.6.8 Update Combo v1.1.

  • BT connection issue with PDA WM Asus P526 and Satellite A300D-17G

    Notebook - Satellite A300D-17G
    PDA - Asus P526 (Windows Mobile 6.1)
    1. Notebook "see" my PDA.
    2. He adds PDA to the list of associated devices.
    3. Starts the connection, and drops him with a problem - "Device did not connect".
    Help me please!

    Vist the following website:
    http://aps2.toshiba-tro.de/bluetooth/?page=howto
    Enter the following search words: "windows mobile 6 Bluetooth"
    Some helpful documents should be listed.

  • I have an older Ipod touch with 4.2.1 and cannot be updated any further, how do I install apps on it now?  so far every app I have tried says I need an updated IOS.  This sounds like I now have an apple product paper weight.

    I have an older Ipod touch with 4.2.1 and cannot be updated any further, how do I install apps on it now?  so far every app I have tried says I need an updated IOS.  This sounds like I now have an apple product paper weight unless I want to run out and buy the latest and greatest overpriced apple product. 

    Are you willing to buy a newer iPod? How about the 4g @ 16gb for $199* usd or the 5g @ 32gb for $299*.
    * tax not included.

  • My phone was sitting on the table, with nothing turned on, and all of a sudden it sounds like there is air coming out of my speakers.

    My phone was sitting on the table, with nothing turned on, and all of a sudden it sounds like there is air coming out of my speakers.  It does this for 1 minute straight, then will stop. When I pick it up, then set it back down, it does it again.
    HELP!!!

    No nothing will show up on the screen.. If I push the 'home' center button it continues doing it, same with the sleep/wake button.
    I thinking it may be static out of my speakers --but I don't understand why all of a sudden it is dong this. I have had no problems with this phone, until now.

Maybe you are looking for