Satellite A300D - Upgrading from Vista - "Setup.exe has stopped working"

Hello,
I am using Satellite A300D with Vista and I have been trying to upgrade to Windows 7 using the Toshiba Upgrader.
After choosing the language and proceeding with other steps, it asks me to uninstall a bunch of programs. Some are uninstalled just fine but when it comes four other programs it says "Setup.exe has stopped working" and it does not uninstall.
I have tried uninstalling them manually but I got the same message.
These programs are;
Atheros Driver Installation Program
Toshiba Hardware Setup
Toshiba Supervisor Password
Realtek High Definiton Audio Driver
As a result I cannot proceed with the upgrade.
Anyone know what the issue might be?
thanks in advance,
Can - TR

I am having the exact same problem. I have the toshiba satellite 350D. I am only stuck at the atheros driver installation program. As soon as it's supposed to be uninstalled I receive the " setup.exe. has stopped working" I tried uninstalling manually as well and get the same message.
I think the only fix would be to reinstall vista and then try upgrading to windows 7 again. I would like to stay away from reformatting though.
I would love an answer to this question as well!! (frustrating)

Similar Messages

  • Cannot install BI Publisher 10.1.3 Windows 7 setup.exe has stopped working

    Hallo!I am trying to install Oracle BI Publisher 10.1.3.4 on Windows 7 Professional 32 bit.When I click on the setup.exe,the following output appears on the cmd prompt
    Starting Oracle Universal Installer...
    Checking installer requirements...
    Checking operating system version: must be 4.0, 5.0, 5.1, 5.2 or 6.0 . Actual 5.1Passed
    Checking monitor: must be configured to display at least 256 colors . Actual 4294967296 Passed
    Checking Temp space: must be greater than 500 MB . Actual 252112 MB Passed
    Checking swap space: must be greater than 500 MB . Actual 1900MB Passed
    All installer requirements met.
    Preparing to launch Oracle Universal Installer from C:\Users\jirungu\AppData\Lo
    cal\Temp\OraInstall2011-04-13_09-33-57AM. Please wait ...
    When the OUI tries to launch,the following error appears
    setup.exe has stopped working.
    Is this due to an incompatibility problem?Are there any prerequisites for installing BI Publisher?How can I resolve this?
    Thanks.
    Edited by: 4joey1 on Apr 12, 2011 11:35 PM
    Edited by: 4joey1 on Apr 12, 2011 11:36 PM

    I am also facing the same issue and i tried with the following modes
    xp mode
    vista mode
    2000 mode
    still i am seeing the same error.
    My Notebook is Window 7 Home Premium 64bit & have jdk 1.6 32bit.
    Edited by: user5345841 on May 26, 2011 12:10 PM
    Edited by: user5345841 on May 26, 2011 12:55 PM

  • WRT400N setup.exe has stopped working

    I just got a brand new HP Pavillion desktop with Vista 64 and I am having installation issues. Every time I put the setup disc in the drive it fails to load and I get an error message telling me that setup.exe has stopped working and will be forced to close. I even tried skipping the autorun and going in to my rom drive and manually selecting the setup.exe file. The initial splash screen appears and says please wait loading but I never get any farther than that because the program locks up. I thought maybe the disc was defective but I have tried it on an XP desktop and an XP netbook and the disc works fine on both of those. What gives? I have searched this entire forum and it seems like I am the only person having this problem. Is my new computer defective or is it the user
    Solved!
    Go to Solution.

    Is the new Vista Dekstop is wired computer or wireless computer ?
    Are you able to go online with the other wired and wireless computers ? If yes then, you do not need to run the CD anymore on the VIsta Dekstop.
    If the new Vista dekstop is wired computer then, just connect the eternet cable from the computer to the router on one of the 4 eternet port and restart the computer and it should be able to go online.
    If the new Vista dekstop is wireless computer then, try to locate your network and connect it using the secuity key(if the network is secured)...It should work !!!  

  • Cannot install ZEN V -- Setup.exe has stopped working -- CTCABEX.

    I cannot install Creative Software for Zen V. Just before the installation finishes, I get the message: "setup.exe has stopped working. A problem with caused the program to stop working correctly. Windows will close the file and notify you if a solution is available."
    I also get the following message: CTX Installer-Install Shield Wizard that file CTCABEX.dll not found.
    Any ideas on how I can load the creative Zen V software>
    Thanks,

    I am also facing the same issue and i tried with the following modes
    xp mode
    vista mode
    2000 mode
    still i am seeing the same error.
    My Notebook is Window 7 Home Premium 64bit & have jdk 1.6 32bit.
    Edited by: user5345841 on May 26, 2011 12:10 PM
    Edited by: user5345841 on May 26, 2011 12:55 PM

  • Getting "setup.exe has stopped working" message when trying to install labview 2011 or 2012 on a windows 7 machine

    I am getting a "setup.exe has stopped working" message when trying to install labview 2011 or 2012 on a windows 7 machine. I already tried running setup.exe as an administrator with the same results. I have Microsoft .NET Framework 4.5.1 installed on the affected machine. Could this be the cause of this issue? Or does someone know the root cause of such error?
    Solved!
    Go to Solution.

    Hi - are you getting it at the start of installation, during or after 100% progress has finished?
    Is it just LabVIEW you're installing, or is it drivers too, in which case, what was the last large package that was installing at the time?
    This could be caused by the NVIDIA chipset driver :
    https://decibel.ni.com/content/message/46299?tstar​t=-130
    Thanks
    Sacha
    // it takes almost no time to rate an answer

  • Configuration of OIM on windows 7 fails with "setup.exe has stopped working

    I have tried everything I can think of and I can't run the config.bat for OIM. OID OVD etc installs and works fine.
    Windows 7 Professional 64 bit
    8GB memory
    I can't believe I'm the only one. If anyone has a suggestion. Thanks

    Peter,
    The higher-tiered (supposedly) Tech had me go to that Web page and follow those instructions earlier this week. I followed all of them, and still had the same problem. That was when she told me that the problem is because my laptop is connected to a Domain (see first post).
    4/15/10 Update: My IT support gave me the password to log onto my laptop using the Administrator logon. This login is not connected to our Domain because it is used by our IT folks to troubleshoot problems with the laptop itself. I installed only Acrobat, RoboHelp, and FrameMaker from this login last night. Then I opened Acrobat 9 and "updated" everything. RoboHelop 8 now works (and it is accessible from my regular login), but FrameMaker is now giving an error message, something about the dictionaries, and it does not open. Here is the error dialog being thrown now by FrameMaker 9:
    I have updated my case with this info and the screenshot of the error dialog. If you know what is causing this error in FM, please let me know what to do to fix it.
    Thank you for your help!
    Marlo

  • Ctxfihlp.exe has stopped working (Vista x64 SP2)

    I'm running an X-Fi XtremeGamer and everything was working great until I just upgraded to SP2 of Vista. Ever since then, every time I restart my computer I get the "Ctcfihlp.exe has stopped working/repsonding" and I have to close the program. This happens on every reboot without fail. I've uninstalled and reinstalled the latest Vista x64 drivers, but the same issue is present.
    I know I can use msconfig to disable the program on startup, but would rather fix the problem vs simply ignoring it.
    Any thoughts?
    Thanks![size="">

    Hi
    Yes tried that yesterday. Same problem unfortenately but with a slightly different errormessage:
    Problem signature:
    Problem Event Name: APPCRASH
    Application Name: AppleSyncMapiInterfaceHelper_x64.exe
    Application Version: 17.30.0.129
    Application Timestamp: 4f19c1f2
    Fault Module Name: olmapi32.dll
    Fault Module Version: 14.0.6117.5001
    Fault Module Timestamp: 4f3e2bc9
    Exception Code: c0000005
    Exception Offset: 0000000000125158
    OS Version: 6.1.7601.2.1.0.256.4
    Locale ID: 2055
    Additional Information 1: 72ca
    Additional Information 2: 72caab554eee933e2cf963c99741d8ec
    Additional Information 3: ab0c
    Additional Information 4: ab0c8a4366442de8177716018b55c16d
    Read our privacy statement online:
    (Outlook is still working normally - but Itunes does not synch with Outlook)
    It apears that i have the same problem, when I disable all outlook sync but resynch the APPS using Itunes.
    Photos and videos is working though.
    Any ideas?
    Best Regards

  • HT1349 I have icloud on my pc with windows vista.  Recently, upon startup I receive an error that says applephotostream.exe has stopped working.  Windows will close this problem . . . any suggestions.  I tried to download the control panel again. no luck

    I have icloud on my pc with windows vista.  recently, upon startup I get a message that says applephotostream.exe has stopped working.  Windows will close this program  . . . I tried re-installing the icloud control panel, etc.  to no avail.  any leads?

    Hi, I have the same problem. Has anyone come forward with any advice on fixing the problem?

  • When I turn on my PC with Vista 64 bits it gives a message "ApplephotoStreams.exe has stopped working. Windows will close program.  Please help.

    When I turn on my PC with Vista 64 bits it gives me a message "ApplePhotoSream.exe" has stopped working correctly. Windows will close the program.
    Please help!!!

    Hi, I have the same problem. Has anyone come forward with any advice on fixing the problem?

  • When starting my windows vista i receive message: applephotostream.exe has stopped working, how do i fix this?

    when i start my computer, windows vista serv. pac 2, i receive message: applephotstream.exe has stopped working. how do i fix this

    Hello! You've posted your question in the iPhoto for iOS forum. This forum is for questions about using Apple's iPhoto.app on an iPhone or iPad. Do you have an iPhone or iPad that you're synchronizing pictures with your PC? If so, you should probably post your question in the Using iPhone or Using iPad forum. We can also ask the Hosts to move this topic into the correct forum if we know which hardware device you're using.
    -Doug

  • This is the closest community that might solve the followingroblem:  Icloud is supposed to work from a pc.  It works fine from my iphone and ipad but not my pc.  I keep getting the error message: ApplePhotostreams.exe has stopped working.

    Iclouds is supposed to work from my PC but doesn't.  Loaded the program several times.  I have all the corrected software.  I keep getting the error message: ApplePhotoStreams.exe has stopped working.  Anybody out there that uses icloud with a PC???

    I've got the same problem and can't find a solution for this problem...

  • Jrew.exe has stopped working when iam trying to install oracle on vista

    hi,
    iam gettin an error stating that jrew.exe has stopped working when iam trying to install oracle 9i on windows vista cam anyone help me in resolving it

    Duplicate post. Please stick to Re: jrew.exe has stopped working when iam tryin to install oracle9i on vista

  • Jrew.exe has stopped working when iam tryin to install oracle9i on vista

    jrew.exe has stopped working when iam tryin to install oracle9i on windows vista can anyone help me to resolve this issue

    869902 wrote:
    jrew.exe has stopped working when iam tryin to install oracle9i on windows 7 , 64 bit versionYou are reviving a 3-year old thread . . .
    And if the OP couldn't install 9i on vista because it (9i) was too old to be certified on Vista, what do you suppose of 9i on Win7?

  • PProHeadless.exe has stopped working error when opening projects in Adobe Media Encoder CS6

    Hi, I recently upgraded to Adobe Cloud CS6 and am having problems with the Adobe Media Encoder CS 6 (version 6.0.1.31 64-bit).
    When I try to add Adobe Premiere projects in AME, it sometimes gives me the following error:
    PProHeadless.exe has stopped working
    I tried rebooting, and it still gives me the same error.  Sometimes the project will load, sometimes it won't.
    The Premiere projects contain a H.264 .mov file coming from my Canon T2i.  I also added an overlay logo to the bottom right of the video that I created in Adobe After Effects, which only contains text, no effects, no motion, etc.  Sometimes I also have a .wav file recorded from a Zoom H4n, but not always.  I usually edit those in Adobe Audition with the remove noise feature.
    I am running on Windows 7 Ultimate 64-bit.  I'm using an i7 with 16GB ram and an ATI 6870 video card.
    I have the LUT buddy plugin installed.
    It will give me the error the first time I try to load the project, and the connection to Dynamic Link Server will fail.  Afterwards, if I try to load the project again, even if I restart AME, it stays stuck in the Connecting to Dynamic Link server...
    Any help anyone could provide would be appreciated.

    Hi Dima,
    Thank you very much for your prompt reply.  Dragging the sequence from PPro to AME made AME lock up.  But your second suggestion of exporting the video directly from PPro seems to be working.  I still have 6 minutes to go, but at least it got up to 25% so far, so everything seems good.
    Thank you once again!
    (although it would be nice if I could go through AME just in case)

  • Kdbsync.exe has stopped working - win 7 64 bit

    I am running Win 7 64 bit on an HP Pafilion HPE h8-1360t.  After last week's round of updates my computer will no longer play mp4 files,  the Media Center will no longer come up (Message: "Windows Media Player has stopped working"), You Tube files will no longer play, the HP Magic Canvas also won't come up,  and the mysterious message "kdbsync.exe has stopped working" comes up when I reboot.
    After hours of reading forums, I have found that it appears to be related to the AMD grapics card update.  My computer has an AMD Radeon HD 7570 card.
    On the AMD site this is listed as a legacy card for XP computers.  I am not sure why HP installed it in a computer running Win 7 64 bit with an Intel Core I7 CPU.  This does not give me confidence in HP equipment.
    The AMD utility correctly detected my card and told me that I needed a driver called:
     14-4-win7-win8.1-64-dd-ccc-whql.exe
    But when I clicked on the Down load button, I got the message, "Could not conntect to server.  Could not parse error." 
    I did not find any such driver on your website.
    How can I get my Media Center working again?
    This question was solved.
    View Solution.

    The idea of turning off all the non-Microsoft services scares me to death as I now have my computer running the way I want it to.
    I also posted on the AMD forums as I had determined that their board was the offending piece of hardware:
    http://forums.amd.com/game/messageview.cfm?catid=454&threadid=173935&forumid=11  You might want to read my reply to the agent who helped me.
    Basically I had to uninstall all AMD drivers and sotware using Control Panel/Programs & Features and then run the AMD Clean Uninstall Program: http://support.amd.com/en-us/kb-articles/Pages/AMD-Clean-Uninstall-Utility.aspx
    Then install drivers from here:
    http://support.amd.com/en-us/download/desktop?os=Windows+7+-+64#amd-catalyst-packages
    I would not recommend that you install this set of drivers unless you are SURE that they are correct for your hardware.  I could not use the Steps 1-5 on the AMD site because the last step required that you pick the operating system that your hardware is running.  The video card that HP installed in my "latest and greatest" computer of a year ago was so old that the only operating systems offered in step 5 were XP and Vista!  Be aware that HP does use legacy hardware in its newest computers.

Maybe you are looking for