Satellite A305D-S6848 does not start up - Windows failed to load

SCREEN SAYS "Windows failed to load because a required file is missing, or corrupt.."
file: ntoskrnl.exe
status: 0xc0000098
I DO NOT HAVE AN INSTALL DISK AND DONT KNOW HOW TO GET SYSTEM BACK UP AND RUNNING??
CAN SOMBODY PLEASE HELP ME ???

Hi
It seems to be a Toshiba US notebook series and therefore the recovery process might be different as on Toshiba European notebooks
However, the recovery procedure should be mention in user manual. Check this
Try firstly this:
Power up the unit and press F8.
Then choose Safe Mode and try to boot the Windows in safe mode.
If it does not work, try Repair the Computer option.
I think the notebook should be equipped with HDD recovery. This means that you could recover the unit without the usage of the recovery disk.
As mentioned this is US notebook series and as far as I know you have to press 0 button immediately after the notebook has been powered up.
This should start the recovery

Similar Messages

Satellite M45-s359, does not start up Windows

I have a problem with this laptop. I just re-install Windows and everything was working perfectly.
Well I started to updated with the windows update, but it took too long, and I had to turn it off
The next day I came and turn the laptop on everything seem to work fine at that point, Toshiba screen, and then black screen with white letters (I do not remember all they say), then the screen turns black, and nothing happens.
I know the laptop is on cause of the leds of the front. I tried turn it off and star over but the same result.
I got my self in to the setup and turn all to default configuration to try more options, but the same result. I did think about could be a problem with the screen, so I plug and external one and no result either.
The computer was working fine....so I started to get worried (I am still worry).
I tried to boot with a CD, did not work, boot with Xp CD did not work.
I think I have not tried a lot options but this where I got so far.
The laptop had some problems with the overheat, but I do not know if that have something to do, cause it turns on.
Any suggestion? (btw I open the part where the cooler is and nothing smells wrong).

Hi
From my understanding the notebooks issue had begun after windows update was not finished. In my opinion its a system issue.
But I wonder why you are not able to boot from the Recovery CD or clean Windows XP CD and cannot reinstall the OS. ?:|
You should try to press the C button immediately after notebook was powered on.
This would enable the booting from the ODD (CD/DVD drive).
At the other hand you could also use the F12 button. Pressing this button would enable the boot menu. Then you could choose the CD/DVD drive and could boot from the bootable CD.
A feedback would be appreciated

PE 9 does not start on Windows 7 Ultimate 32 bit

No matter how I try to start PE 9, it does not start.
From Welcome Screen -> New Project: nothing happens. Form Elements Organizer -> File - New - Premiere Elements Video project it takes some time loading all modules, libraries and sorts of things until an error message appears saying that PE 9 does not function anymore.
That's all, no error log or something like this. Please let me know what info is needed.
PS: Why does my cursor jump to the beginning when I press enter in text editor here?

Trying to use only ONE Hard Drive for Video Editing
You are a music conductor, with a baton that you use to point to various parts of the orchestra... this is like Windows pointing to various
parts of the hard drive to do Windows housekeeping or to load program segments for various functions
Now, at the same time and with the same hand... while still using the baton to conduct the orchestra... pick up a bow and play a fiddle...
this would be doing something with your video file at the same time as all the other work
You as a person cannot do both at the same time with the same hand
A computer is a LITTLE better, in that it can switch from one kind of task to another very quickly... but not quickly enough for EASY video
editing
You need AT LEAST two hard drives (separate drives, never a partition http://forums.adobe.com/thread/650708?tstart=0 for more) with Windows
(or Mac OS) and software on your boot drive, and video files on a 2nd drive so the boot drive is not slowed down by trying to do everything
I find that the three drives I use work very well for me, for editing AVCHD video... some people use a 4th drive, so video INPUT files are on
drive three and all OUTPUT files are on drive four... I only bought a mid-tower case instead of a full tower case (my bad... but had to fit in
the space available on my office desk!) so I use the three drives that will fit
Depending on your exact hardware (motherboard brand & model AND USB2 enclosure brand & model AND external hard drive brand & model) AND the
type of video file, you may... or may NOT... be able to use an external USB2 hard drive for SD (Standard Definition) video editing
Steve Grisetti in the Premiere Elements forum http://forums.adobe.com/thread/856208?tstart=0 and Jim Simon in the Premiere Pro forum
http://forums.adobe.com/thread/856433?tstart=0 use USB externals for editing
A USB3 hard drive connected to a motherboard with USB3 is supposed to be fast enough for video editing (I don't have such, so don't know) but
eSata DOES have a fast enough data transfer for video editing... I have not used this eSata Dock... for reference only, YMMV and all the usual
disclaimers
http://www.amazon.com/Thermaltake-BlacX-eSATA-Docking-Station/dp/B001A4HAFS/ref=cm_cmu_pg_ t

Satellite 1800-814 does not start if AC adapter is plugged in

Hello,
I've got a problem with my 3 year old 1800-814.
It all began with sudden Windows crashes. Sometimes it ran smooth, sometimes it just hung up. So I decided to reinstall the notebook. My Problem is when it is plugged into pressing the power on button does not start the laptop. Just the green light is on nothing else happens. Sometimes it starts after a wait of 3 or 5 secs. On battery it starts every time. What can I do? Defect hardware or just dust somewhere?
Thanks,
Jens Grieger

Hi,
If you have a voltage tester test the AC adapter and see if it has the right current voltage, which is written on the adapter. If it does, plug the adapter into the portable and move it around, see if the light turns on and off while you are moving the ac plug(near where it plugs in to the computer, to see if it is a loose ac harness inside the computer). Does the computer randomly turn off if you have the battery removed? Or do you notice that it suddenly switches to battery power and back to AC adapter while the adapter is plugged in? Could be the adapter. Check that first. If that is good, then check the adapter plug(located on the back of the computer, where the adapter plugs in) to see if it is loose. If you find that it is loose, you can take it to an Authorised Service Provider and have them fix it. I hope this helps.

Itunes does not start in Windows 7

Hi,
Itunes does not start anymore...
It used to work witout any problems. Any hints?
Thanks
Philofun

Restart Computer.
Refer steps here to delete SC file(s):
Win7/Vista http://support.apple.com/kb/TS2363
WinXP http://support.apple.com/kb/TS1776
Then proceed to repair your QuickTime. START > CONTROL PANEL
WinXP - Add n Remove Programs
Win7/Vista - Programs n Features
highlight QUICKTIME and click CHANGE then REPAIR

Satellite L650-12Q does not start up

I have a toshiba L650Q laptop. Its been working fine since 1.5years now..
Just a couple of days back I closed the laptop ie closed the screen ( typically it puts the same in sleep mode).
After about 10 min when I tried to open & start up the laptop simply does not startup :(
I can see the battery & power adapter LED glow, but when I press the start button, it simply does not start..
there is momentary glow of the power on button, i hear the fan trying to start up & then it dies down in abt 2 seconds & laptop simply does not start up..
I tried the below troubleshooting steps but no success
1) I removed the battery & tried starting using the adapter, it dint start up
2) I put the battery out for like 1 hour & then tried again, it dint start up
Please advise the troubleshooting steps or any pointers as what could the problem be & how can i resolve it..
Message was edited by: dhiru23

Try this:
- Remove the battery and disconnect the AC adaptor.
- Press power button 30sec long
- Connect battery and AC adaptor to the notebook
- Try to power up the unit.
If this fails, check the memory modules.
Remove one module and try to boot the notebook using one module. Run the test for each slot and module.

Satellite A series does not start up after BIOS update

After bios update with downloaded utility my notebook does not start up.
Did this case covered by warranty?

Im not quite sure if this would be covered by warranty. You should contact the ASP in your country for details but I presume its not covered.
PS: Did you try this workaround:
- remove battery, disconnect the AC adaptor
- wait ~ 40min
- connect both devices again and try to power up the notebook

My Satellite A notebook does not start due to missing files

I have a Toshiba Satellite and at the start of every month is ***** out.
I brought it brand new about 2 years ago and at the start of every month it will not go into windows.
It wont even let me into safe mode or anything and it is not a virus as I expected it to **** out tonight.
So I did a virus scan and nothing showed up and then half an hour later it died, right on schedule. Im sick of this as each time it dies I have to use the recovery disk and it wipes everything. I have on there and after 2 years of having to restart everything all over again each month. Im ready to "accidentally" drop it in the pool and claim insurance on the dam thing. I dont get me wrong its great till the first of every month and without warning it just goes really slow, and when I restart it, it says a file is missing and wont boot up.
The weird thing is........... it is always the same time of the month and since today is the 4th it died so at Im on my 8s computer typing this while my Toshiba is restarting all over again.
IF U THINK, YOU CAN TELL ME WHY THIS IS HAPPING I will love u forever.
Im just so sick of having to reload everything and like last month I expected it to kill itself. So I did all the scans and cleaned it up.
But no it still died right on schedule..........hmm plz help

Hi sorry can't actually give you a solution to your problem but would say sounds as if you never thought to buy extended warranty on it, also if it did this within the first year what did Toshiba say about it as surely you asked them to look into it and if not, sorry but why on earth not? I can see why you thought it was a virus but sounds to me(not technically trained but using logic) that if it does it at the beginning of each month then its something wrong with the actual computer that deals with the clock and might be worth emailing Toshiba themselves and explain it to them and see what they say or take it to a computer shop and explain and ask them to look at it and see if they can find out what is causing it as sounds as if it's been doing this from the time you first bought it.

Satellite M-series does not start correctly

Hello,
I have the following problem: suddenly (don't know why, nothing changed) Satellite notebook shows black white screen with about the following:
(sorry, translated from german):
windows did not start correctly... due to software or hardware change.. pls choose last functional configuration if mistake was due to power shut down...
But this does not work, also all other options (start windows as normal, start in safe mode...did not work.
No idea what happenend !
Problem:
Actually moved to another country and forgot or lost recovery CD ! already contacted Toshiba for new one but maybe anyway somebody can help?

Hmm. Stupid situation. If possible try to obtain Microsoft WXP installations CD to see if you can start installations procedure properly and if you can use repair option too.
It is not easy to say what is wrong there but I just hope there is no problem with HDD. Try to use original recovery disc.

Satellite A660-11M: Does not start with 8GB of RAM, but works with 6GB

Satellite A660-11M:
I upgraded my RAM from 4GB (2x2GB) to 8GB (2x4GB). When I start the computer I can see in the BIOS it reads the 8GB of RAM. However, when it boots up, it does not go past the blank DOS screen (just before starting Windows).
If I remove one of the 4GB & replace with a 2GB (so I have 6GB in total) it starts ok.
Does anyone know how can I get it to work with 8GB of RAM?

Hey,
To be honest I never heard about SanMax RAM modules...
In my opinion the problems is related to your RAM modules Not compatible to your notebook or defective.
Can you test it with high quality modules from Kingston or pretested modules from an authorized service provider?

Lync 2013 Desktop does not start on WIndows 8.1

My Office 365 version of Lync 2013 64bit crashes every time I start it. There is no error message just the "Microsoft Lync has stopped working" message with Close option. In further looking for a solution, I found the suggestion to
uninstall the Intel Bluetooth drivers but my system uses Realtek Filter drivers. I have looked  in the event logs and found:
Log Name:      Application
Source:        Windows Error Reporting
Date:          2014-09-11 1:47:20 PM
Event ID:      1001
Task Category: None
Level:         Information
Keywords:      Classic
User:          N/A
Computer:      --------Win8
Description:
Fault bucket 85949488684, type 4
Event Name: APPCRASH
Response: Not available
Cab Id: 0
Problem signature:
P1: lync.exe
P2: 15.0.4641.1000
P3: 53c5ce3c
P4: KERNELBASE.dll
P5: 6.3.9600.17055
P6: 532954fb
P7: e06d7363
P8: 0000000000005bf8
P9:
P10:
Attached files:
C:\Users\Yves\AppData\Local\Temp\WERCA6B.tmp.WERInternalMetadata.xml
These files may be available here:
C:\Users\Yves\AppData\Local\Microsoft\Windows\WER\ReportArchive\AppCrash_lync.exe_1f7a49ef615ca788e016ddaf8db0d1fb92c4a8e9_00000000_256fdc4d
Analysis symbol:
Rechecking for solution: 0
Report Id: aa908032-39db-11e4-8280-48d224dc5142
Report Status: 0
Hashed bucket: 61000269e077a9a343a6fe9bbb7efc54
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Windows Error Reporting" />
    <EventID Qualifiers="0">1001</EventID>
    <Level>4</Level>
    <Task>0</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2014-09-11T17:47:20.000000000Z" />
    <EventRecordID>143379</EventRecordID>
    <Channel>Application</Channel>
    <Computer>Fedmet-YL-Win8</Computer>
    <Security />
</System>
<EventData>
    <Data>85949488684</Data>
    <Data>4</Data>
    <Data>APPCRASH</Data>
    <Data>Not available</Data>
    <Data>0</Data>
    <Data>lync.exe</Data>
    <Data>15.0.4641.1000</Data>
    <Data>53c5ce3c</Data>
    <Data>KERNELBASE.dll</Data>
    <Data>6.3.9600.17055</Data>
    <Data>532954fb</Data>
    <Data>e06d7363</Data>
    <Data>0000000000005bf8</Data>
    <Data>
    </Data>
    <Data>
    </Data>
    <Data>
C:\Users\Yves\AppData\Local\Temp\WERCA6B.tmp.WERInternalMetadata.xml</Data>
    <Data>C:\Users\Yves\AppData\Local\Microsoft\Windows\WER\ReportArchive\AppCrash_lync.exe_1f7a49ef615ca788e016ddaf8db0d1fb92c4a8e9_00000000_256fdc4d</Data>
    <Data>
    </Data>
    <Data>0</Data>
    <Data>aa908032-39db-11e4-8280-48d224dc5142</Data>
    <Data>0</Data>
    <Data>61000269e077a9a343a6fe9bbb7efc54</Data>
</EventData>
</Event>
A lot of sites suggest to uninstall Intel Bluetooth drive but I does not have Intel Bluetooth.

Go to your computer manufacturer’s website and update all driver packages for your computer, especially:
Audio drivers
Bluetooth drivers
System chipset drivers
webcam drivers
Important Note:
If you use office 64 bit, Lync 2013 must be 64 bit also. {And vice versa, If you use office 32 bit, Lync 2013 must be 32 bit}
Also check answer of Eric to fix this issue
http://social.technet.microsoft.com/Forums/en-US/e8268935-e97c-4033-9a2e-02734b4390bf/lync-2013-client-on-windows-81-stuck-at-starting?forum=ocsclients
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"
Mai Ali | My blog: Technical | Twitter:
Mai Ali

Satellite A305D-S6848 - Upgrade from Vista to Windows 7 32bit

I started the upgrading process, but it giving me a message that, I need to uninstall ATI CATALYST Install Manager, ATI Catalyst Control Center. My laptop is model A305D-S6848 Vista 32 bit. I don't know where to start to get that so can somebody point me to right direction to get that?
My laptop use ATI Radeon X1250 Graphic Card.
Any help will be greatly appreciated, thanks

Hi buddy,
I think you have to uninstall the ATI Catalyst driver (display driver) because the version is too old and not compatible with Vista. You can uninstall the display driver in control panel > uninstall software. There you should find a list with all installed programs and drivers.
Newer display driver you can download on official Toshiba website:
http://www.csd.toshiba.com
Check this!!!

Photoshop CS5 and CS6 does not start. Windows 7

I am using Photoshop CS5 as well as CS6, 64-bit on Windows 7. Since the last few days, I noticed that Photoshop would take a very long time to start (earlier it used to start within few seconds). Today, I found that both the Photoshop versions do not start at all. Nothing happens when I click the short-cut on the Task Bar. Neither do they start through the Start Menu. Why does this happen and what is the solution?

Have you tried using the task manager to see if Photoshop is hung and look at your windows reliability history to see if Photoshop CS5 an CS6 are crashing?

SAP Web Dispatcher does not start as windows service

Hi,
I have successfully installed and configured SAP Web Dispatcher. When I start the web dispatcher from command prompt, it works fine. I created a windows service for web dispatcher using the command
ntscmgr install sapwebdisp -b "c:\program files\sap\sapwebdisp\sapwebdisp.exe"
-p "service pf=sapwebdisp.pfl -cleanup -auto_restart"
The command successfully created sapwebdisp service. The service also starts fine, but web dispatcher does not get started.
Any ideas experts?

Hi,
Ok. Few suggestions.
1. Can you review the SAP note:
552286 Troubleshooting for the SAP Web Dispatcher
2. When you said: "web dispatcher does not get started ", what error you got ? Can you be more details here ?
3. Please check the trace file dev_webdisp" that generated in the work directory. If the log entries is not abvious, increase the trace level to 2 or 3, and reproduce and re-check the trace file.
4. What is the output of the command "sapwebdisp -v"
5. How about sapwebdisp.pfl ? Are those settings correct ?
Hope this helps.
Regards,
Vincent

Satellite A300-15A does not start up after Alcohol program installation

Hi...
I bought Satellite A300-15A yesterday and after completing the Vista installation process, I tried to install "Alcohol" but my notebook shutdown and now I'm not able to start notebook.
It is not starting in any mode.
I forget to make recovery discs. I think Alcohol is not compatible with Vista. Error which i receive is below.
Can anyone tell me the solution?
Please help urgently
"A problem has been detected and Windows has been shut down to prevent damage to your computer.
If this is the first time you've seen this Stop error screen, restart your computer. If this screen appears again, follow these steps: blah blah... "

Sounds like a familiar problem to me, as I had the same one with the Daemon tools. After installing those tools I couldn't start my Windows XP any more. I guess it somehow mixed up some drivers or registry entries, but not sure about that.
Ok, you can try to deinstall the tool by first starting Vista in safe mode (press F8 before Windows boot up).
You should be then able to enter Vista without problem.

Satellite A305D-S6848 does not start up - Windows failed to load

Similar Messages

Maybe you are looking for