Satellite A350-214 media keys not working

After upgrading from Vista to Windows 7 the feather touch media keys are not working.The bluetooth perpheral device drivers are also missing.Pl help...

Try downloading the Windows 7 drivers.  You can get them from here:
http://support.toshiba-tie.co.jp/windows7/download/Satellite_A350_32_cae.htm
The buttons are controlled by Toshiba Value added software.  There is a bluetooth stack you may need to install.  You may want to add the rest of the windows 7 drivers.  The display and sound drivers will give you additional HDMI support that the native driver does not support.
Good luck

Similar Messages

  • Keyboard Satellite 3000-214 - Ctrl-key not working

    Hi,
    I've started my old Satellite 3000-214 Notebook and suddenly my Ctrl-key did not work anymore.
    I've already tried to clean the keyboard by unmounting all keys from it and cleaning the foils, without success.
    Can anyone tell me where I can get a suitable keyboard from (I live in germany)?
    Does it has to be an original Toshiba keyboard or can it be from an other manufacturer?
    How can I remove the keyboard from the laptop? Do I have to open the case or is it possible to get it out with a screwdriver or something?
    Thx for any hint!
    Best regards.
    Ting

    Hi
    You should use the original Toshiba keyboard which is supported and compatible with this notebook.
    All parts and devices you can purchase from the Toshiba authorized service partner in your country. The full database with worldwide ASP you can find on the Toshiba European support page.
    Usually if you want to remove the keyboard you have to remove firstly the thin cover above the keyboard.
    There you will find two screws which secure the keyboard. After removing of these two screws you will be able to put out the keyboard.
    But be careful; the keyboard is connected with the flat cable to the motherboard.

  • Satellite L850 - Special function key not working properly

    Hi Everyone,
    I had Satellite L850 (pskg8a-07f001) running windows 8 64 bite for just 2 months.
    Just within this week, the special function key not working, each time I start the pc, i have to go into toshiba desktop assist then function key then click ok, it will working.
    But the touch pad has been set as enabled, also under keyboard setting has been set as special function mode. But don't know why each time start the pc have to go into function key box then click ok.
    When I bought it everything is ok, i can use the special function key to turn up and down the volume and disable wireless...etc
    Please advise. Thks a lot!

    Take a look here:
    Function key changes in Satellite and Qosmio 800 series
    http://aps2.toshiba-tro.de/kb0/TSB2903E00000R01.htm
    You can use the traditional FN + F key mode or just an F key mode.
    This can be enabled and disabled in BIOS or the HWSetup
    In BIOS go to Advanced -> System configuration -> Function key mode
    This mode can be changed
    Also be sure that Function Button option is enabled too

  • Satellite P305-S8820 - FN key not working after clean install of Windows 7

    Hi,
    I have a Toshiba Satellite P305-S8820. I recently did a clean install of Windows 7. I have loaded the Toshiba value added driver pack and the trackpad driver but still cannot get the trackpad or the FN key to work.
    Any ideas?

    Hello John
    You are like other millions other users and what you can read is relevant for you but sometimes it works a little bit different. For you it can be useless but sometimes it helps. Fact is that this utility is offered for some notebook models.
    Generally speaking you are right and after VAP installation the job should be done but Ive faced the same problem in the past. Sometimes it works well and sometimes not. You will not believe me but in the past I used stuff for Satellite P300 to get all stuff working on Satellite A350. I cannot explain why this happen and it sounds crazy but it is the truth.
    You can also try to play a little bit with VAP installation. Try to install VAP for A300/A350/P300. Generally speaking it is the same and if this will not work well you can remove it from the system.
    Launcher for flash cards? It must be listed in MSCONFIG > startup > TcrdMain.exe

  • Satellite A50-112: F1 key not work for entering Bios

    my toshiba Satellite SA50-112 not entering into BIOS or CMOS setup because of F1 key is not functioning what i can do for changing the boot sequence to CDROM by alternative way.
    please help us to work better

    There are THREE ways to make your notebook boot from CD:
    1) You can adjust the BIOS setting by entering into it with the key "ESC" (not F1 as you said before)
    2) You can boot directly on CD by holding down the key "C" during starup
    3) You can make the "Select Boot device menu" appear by holding down the "F12" key.
    All above key combinations work DURING STARTUP of your notebook only. Therefor try your timing ;)
    Good luck :)
    electrochain

  • Satellite Pro A10 - some keys not working with new keyboard

    Hi all
    I hope some1 can help with this
    i have a Satellite Pro A10. The prob i have is a.b.n.and enter keys are not working and its a new keyboard
    i fitted into my other A10 and all keys work so keyboard is fine.
    All works ok with usb keyboard. Had motherboard out all seems ok.
    Any help plz
    chris....
    Message was edited by: widgy

    Hi
    Why do you think that the motherboard is ok?
    Maybe its a keyboard controller issue
    Did you check if the cable was connected properly?
    In my opinion if you are 100% sure that the keyboard is ok then the issue must be related to the motherboard because there is no other part which is placed between the keyboard and mobo.
    Bye

  • Media Keys not working

    For some reason my media keys (play/pause/fwd/rwd) on my aluminiu keyboard have stopped working.
    When I first got the keyboad they didn't work... I installed KeyboardSoftware1.2 and they started working.
    But, I'm not sure when or how, they have stopepd working again.
    All the other keys (Expose, Brightness etc) work fine.
    I have tried reinstalling 10.5.8 combo, repairing permissions, booting in safe mode, repairing disc (from instal dvd), installing and uninstalling sizlingkeys (this allowed me to apply custom settings to other keys, but not to the media keys)....nothing helped!
    I can't reinstall the KeyboardSoftware update... as it thinks itis already installed... I tried to bypass it with Pacifist, and this caused a right mess (http://discussions.apple.com/thread.jspa?threadID=2360985&stqc=true) which I still haven't sorted either.
    Any ideas??
    Cheers

    Well...
    I took the plunge and did a full Archive & Instal (without copying my files/settings over).
    This solved both the Media/Play keys issues... and the weird Save dialogue issue.
    http://discussions.apple.com/thread.jspa?threadID=2360985&tstart=0
    However, I consider this as a work around, as I never really found out what caused the issues in the first place!
    Oh well....
    The only reason I held off doing the Archive and Install in the first place is because it is quite time consuming, especially with a heavily customised Library folders... and I just didn't want to go through the hassle of reinstalling everything!
    Hmmm... at least it is sorted.
    I guess I should probably get a new graphics card as well due to that error that showed...?

  • Media Keys Not Working - Apple Wireless Keyboard - Snow Leopard 10.6

    Hello, I am a new user to this Support Area and i tried calling but as its Christmas Day i cant get through because there closed so i decided to join here.
    Ok basically my problem is that i have a iMac and i recently installed Snow Leopard and on Christmas Day i got a Wireless Apple Keyboard i set it up all went well and got through all the bluetooth process fine except when i went to try use the Media Keys which are Brightness Up/Down, Volume Control, Play/Pause/FastForward and the other two don't know what there called tho when i press any of them they dont work when i press F12 which has a picture of Volume Up it goes to my Widgets thing and when i press F11 which is Volume Down it moves all the current apps out of the desktop like a clearing space function.
    I Really would like to have the Media Keys back to how there supposed to be i don't know why it is doing this but i think its Snow Leopard.I Have tried everything possible in System Prefs even removed the keyboard from the Bluetooth paired devices and re paired it but still nothing. It would be mostly appreciated if one you guys could help me soon..
    Thanks Sean

    Wow! I am in the exact same situation. I don't think it is Snow Leopard tho b/c when I plug my old keyboard back in the media keys work fine. It might have to do with the apple aluminum keyboard 2.0 update but when I try to download that it says my system is unable to support it (eben tho it only requires at least 10.5.8).
    If you find a solution let me know.

  • Toshiba Satellite C850-F12S Function Keys not working

    I recently formatted my laptop after the OS was corrupted by a virus and reinstalled windows 7 but now my Function keys that enable me to adjust brightness, volume and turn on wireless are not functioning, They only work when in BIOS setup and even when I tried to enable them to be standard F1-12 or special function keys they still dont work after starting windows. This computer has no flash cards for toshiba and i dont know which drivers to look for for this specific model. I also lost toshiba eco-utility and its player. How do i get all this back without losing my data?I have partitioned my hard disk.

    Hi Eldorado
    Thanks for your suggestion. Have done as you said but still have the problem.
    I've managed to get rid of the TouchED error dialogue by uninstalling the Touchpad on/off utility, but I can't get the function keys to work again. The problem appears to be that the Common Modules drivers are not reinstalling properly - the software (thotkey.exe) that operates these has to be within this. I have tried extracting the cab files for the Common Modules but nothing with let me into Toshiba's cab files to see if they are there so that I can copy them across manually.
    I can live without the function keys on my machine, but this is a pain - especially when I'm sure the problem has a simple solution.
    Cheers
    David

  • Apple keyboard media keys not working

    Yesturday i was trying to trun down the volume in my itunes off my apple keyboard, when i went to do so nothing happend even with the eject button with the cd nor can I make the screen brighter or darker and the dashboard key is on my play key.

    Wow! I am in the exact same situation. I don't think it is Snow Leopard tho b/c when I plug my old keyboard back in the media keys work fine. It might have to do with the apple aluminum keyboard 2.0 update but when I try to download that it says my system is unable to support it (eben tho it only requires at least 10.5.8).
    If you find a solution let me know.

  • Media keys not working MacBook Pro 17"

    Just today my media keys are no longer working to control iTunes (F7 thru F10). I've unable too check the keyboard settings in system preferences because it crashed when I try and open it. I have rebooted twice and repaired permissions.

    I had a eureka moment this morning- Google Play Music basically hijack my media keys. So long as Chrome is open, the keys seem to be wired to the play store (they work normally, skipping, pausing and playing). If I quit Chrome, the keys work as normal with iTunes, opening and moving through the tracks.
    I don't know whether this information helps but it certainly seems to answer my problem.

  • Razer Lycosa media keys not working iTunes 11.0.1.12

    I recently updated to iTunes 11 from the latest iTunes 10 version. My media keys on my Razer Lyocsa were working prior to then. Does anyone know of a way to get them to work again? I tend to use them to skip/pause songs while midgaming. I'm running Windows 7 64-bit.

    Try gn_id's suggestion from the following post:
    Re: iTunes 11 crashes when opening the store - no error message

  • Media keys not working on iMac (mid 2010) keyboard using iTunes 10.5.3

    Keyboard media keys, rewind, play/pause & forward have stopped working ?
    All other keys seen fine, all software up to date Mac OS X Lion 10.7. & iTunes 10.5.3.
    Any suggestions on how to fix ?
    Thanks

    Hello:
    Since everything you have is under warranty, call Applecare for a warranty replacement of the KB.  Apple pays shipping both ways.
    Barry

  • Satellite A200-PSAE6E - FN key not working on Vista 32bit

    Hi all
    I can't get the FN key to work, no matter how many times I reinstall Toshiba software, it just doesn't seem to work!
    Anyone got a workaround?
    I'm using Bios 2.40, and Vista 32bit

    Hi
    If you installed your OS manually the right installation order is necessary to get all Toshiba tools and notebook features working.
    Please follow the installation instruction which can be found in the installation instruction txt file.
    On the Toshiba European driver page you will find also the *Flash Card Support Utility 1.49.0.2C*. It is needed to use the Toshiba Flash Cards (FN + F* Keys).
    Additionally the VAP must be installed too
    Regards

  • N95 MEDIA KEYS NOT WORKING even without ALARM

    hey, guyz my media touch keys, [used in landscape mode] arent working, these arent working from the very first day[even when i hadnt adjusted recurring alarm] neither i have used my own back-ground pics in media menu. my firmware version is 20.16, the latest one ,
    i got n95 as a gift and the person bought it from Saudi Arabia!
    what say NOKIA, what excuse u have this time ?

    regarding the 8GB version, mine is silver but came with a 8GB memory card from o2 UK would that not make it the 8GB version?
    No,i have exact same phone as you,N95-1 with 8gb memcard but the firmware is way behind.N95 8GB has V20.0.015 as standard fw
    for lighta isue,check in tools,settings,general,personalisation,,display,and look where theslider is for the light sensor,,if its low tweak it up a bit...keypad lights only work when light sensor detects a little light,so at midday,lights wont light up anyway,dont need to..energy saving i guess...check these and get back to me m8
    N91
    N95-1
    RM-159
    12.0.013
    8Gb microSd card

Maybe you are looking for

  • Excise Duty Not to be Collected from Customer

    Dear All, I require help in a scenario, wherein company has already paid excise duty to produce the goods but does not collect it from the customer for any footwear pair which has been priced less than 250 Rs. The company wants excise to appear in th

  • Can't edit informations or add artwork to certain tracks...

    Hi all, is there somebody that can help me with this? I have iTunes 8. Among the several tracks i added to my library, there are some that are basically unaccessible: I right-click on them and go to the "Get Info" menu'; whereas the blanks can usuall

  • ITUNES 7.1 JUST CAME OUT I HEARD.....

    ITUNES 7.1 JUST CAME OUT I HEARD.....So for all of you who have had problems check it out,,i am gonna see if its true right now..

  • Alignment of columns in sales order

    Dear Colleagues, User wants to fix his layout in the slaes order screen i.e. VA01. He wanted to align columns as per his requirement. He wants to have the same at all logins of VA01. How to save the changes to reflect all the time.. He made changes m

  • How can i get the stack of one thread from another thread

    hi ! i have a pool threads ,some times all therads in that pool are besy becouse somting lock the threads so there is no free thread to handle ... . what i want is a way to get the stack of these thread so i can print them to see way they lock ... th