Satellite A350 - NO WLan LED, NO WLan in device manager

Hi,
I have same problem...
The led is not working, no F8 in flash cards, no wifi adapter in device manager.
The problem appeared after system's being reinstalled.
I tried everything (also from this thread) and including attempt to install new wifi adapter- same situation occures.
When I search the internet to find the solutions it apeared that many people had same problem after reinstaled the system.
Please help :)
(btw sorry for mistakes that can appear in this post- english is not my mother tongue ;)
Message was edited by: meraszka

Hi
> The problem appeared after system's being reinstalled.
How did you reinstall the OS?
Did you use the Toshiba Recovery disk?
If not then I assume that you have installed wrong WLan driver
> no wifi adapter in device manager.
Do you have a yellow exclamation mark in the device manager -> Network Adapters?
If yes, then this would mean that a WLan driver is missing
I dont know what WLan card you have but you can find all WLan drivers here:
http://aps2.toshiba-tro.de/wlan/
PS: ensure that BIOS is up to date and that it has been set to default settings.

Similar Messages

  • Satellite Pro L300-23L: error code 12 in device manager after Vista install

    Ok,
    So I've re-installed Vista (32 w/ SP2) on my Satellite L300-23L after a virus and I'm having a couple of issues:
    Issue 1
    A Code 12 on Intel Family Chipset 4 - There are two versions of this in the device manager, one is hidden. The one that isn't hidden is the one with the Code 12. I've tried installing latest drivers from both Toshiba and Intel. Problem still persists.
    Issue 2
    The sleep option on my power off section is greyed out and the hibernate option is missing altogether. Have tried upgrading BIOS but install says that they are up to date.
    HELP! - I can find my way around a computer but don't assume I'll just know how to do something, I'd be grateful if you could walk me through any actions.
    Thanks in advance. :)

    Hi
    The error code 12 means:
    This device cannot find enough free resources that it can use. If you want to use this device, you will need to disable one of the other devices on this system. (Code 12)
    Dont think this has something to do with the missing driver.
    Would recommend doing this firstly:
    1. Go to Start Menu-All Programs-Accessories, then right-click Command Prompt and select Run As Administrator
    2. Enter: bcdedit /set CONFIGACCESSPOLICY DISALLOWMMCONFIG
    3. Restart your PC

  • Satellite A60-S1591ST: yellow exclamation marks in the device manager

    Hi,
    Recently I formatted C: and installed XP professional. But after the installation, there were several problems.
    First, in device manager, there are big yellow marks in SM BUS Controller, Video Controller (VGA Compatible).
    How can I fix these?
    Second, when I scroll down screen side bar to read or see some contents down in a certain site, my screen is so sensitive and waves simultaneously with moving or clicking of the scroll bar. Is it related with above devices?
    My notebook is Toshiba Satellite A60-S1591ST, XP pro with SP2
    I don't know how to recognize the model of motherboard
    thanks in advance.

    Hi
    The problem can be solved very fast the yellow exclamation appears in the device manager because you didnt install the necessary drivers.
    So you will now ask for the driver page ;) Am I right?
    Well this is a Toshiba US notebook I think so ;)
    Check this page:
    http://www.csd.toshiba.com/cgi-bin/tais/su/su_sc_modSel.jsp
    Choose the Satellite A60-S1591ST and you should get all needed drivers.
    Regards

  • Satellite 1700-300: No Lan port in the device manager

    Hi Forum.
    I am currently repairing a Sat 1700-300 and reinstalling windows ME (Yuk i know but it is the customers preference), however it doesn't show that there is any ethernet hardware on the system. There is an ethernet port on the back of the laptop but it just doesn't show up in the device manager.
    My first though was that it may be disabled in Bios, which i have checked and there is no option there for ethernet.
    Any idea's folks?

    Thats a good question, however the work was only carried out on the hard drive and not the motherboard itself. The owner of the laptop has said that he has never been able to use the RJ45. My theory is that it was included on the board but never activated, hense the reason there is no metion of it in the specs or in the bios.
    Is this very probable? and would a bios flash possibly resolve this issue?
    Just to re-iterate, there is no entry in the hardware manager for the port or any unknown drivers at all.
    The reason I posted on this forum is because it is a Toshiba forum, are there any Toshiba techies here or is this just a community forum?

  • Satellite P10-304: WLan card replacement - Do I need the same Wlan chip?

    Hi all,
    got a satellite P10-304 from a mate here.
    He said the wireless has never worked on it and hes had it years and someone else has already looked at it and changed the wireless card TNA.
    Basically it just acts as if the wireless switch isn't working and it stays permanently off although the drivers install fine and the card shows as ok. Just disconnected.
    Now I thought, ok, i'll take a look as I'm pretty good on the old hardware. Took it apart and what do you know, the switch was bent and not in place. I put the switch back into place, checked in the on and off positions with a multimeter to check the switch was working and it was doing its job perfectly.
    Now it still does not work.
    I am guessing this is now due to the fact that as I said, the card has been changed from its original to an intel pro jobby.
    My question is, am I right, do I just need to get the same card that was originally in it. I assumed that when the switch was put back correct I would have it solved.

    Hi
    The WLan card should be enabled bu switching the switch to ON position (the LED should light up) and additionally you should chose the WLan antenna using the key combination FN + F8.
    Please check this!
    Note; go to device manager -> Wlan card properties -> Advanced tab
    There you can check if WLan is enabled as well.

  • Cannot connect Satellite A30 to WLan

    Hi,
    I have bought second hand Satellite A30 for young daughter - cannot get wireless hub connection.
    Can anyone help please with requirements/upgrades necessary for this?
    Man thanks and regards

    As Jeffrey said, check if wireless lan device is listed in device manager.
    But as far as I know the A30 was not equipped with such a module nor bluetooth.
    This leads me to the conclusion that your notebook doesn't have a built in wlan module but you could buy some external devices like usb sticks.

  • Satellite P850 - Need WLAN Driver for Windows 8.1 64bit

    I have Satellite P850 - I renewed my Kaspersky Internet Security and did Windows update for 8.1 64bit. Now I have no Wireless LAN driver. I can only connect to internet with ethernet cable.
    I have searched high and low for 2 days looking for a solution. I want to keep everything Toshiba authentic so not wanting to stray to other dodgy diagnostic sites. Toshiba only has Realtek WLAN for Windows 8 version 2.00.0020 available for download - which is already installed on my computer but it is not working - I did reinstall to see if that fixed the problem but no.
    Any assistance will be appreciate. Thanks.

    Thanks Macius any assistance is appreciated.
    Model is P850 PSPKFA-02C001
    This is status in Device Manager:
    This device is not working properly because Windows cannot load the drivers required for this device. (Code 31)
    {Operation Failed}
    The requested operation was unsuccessful.
    This is the Windows Diagnostics message I get:
    The Realtek RTL8723AE Wireless LAN 802.11 n PClE NIC
    adapter is experiencing driver-or hardware-related problems
    Not fixed
    The wireless network adapter is experiencing problems Foiled
    Contact your administrator to resolve driver or hardware issues.
    0 Network Diagnostics Log
    Fil• Nam<: EDDFCCDC -CA684791 941BCBE488869199.Repair.1.etl

  • Satellite L305D-S5895 WLAN driver for Win XP

    Hi,
    i got a new Satellite L305D-S5895 and downgrade to Win XP for software requirements.
    The sistem can't recognize the Wireless LAN adapter, and I got tree unrecognized devices in device manager:
    SM bus controller, Ethernet controller (but in a fact I'm ethernet conected now) and modem device.
    How can I install de WLAN driver?
    THANKS

    Hi
    Ethernet controller means two devices; LAN or WLan. If LAN card is recognized then the Ethernet controller can be only a WLan card.
    I dont know what WLan card this notebook supports but you could install an hardware diagnostic software like Everest home edition and could find out what Wlan card is installed. Then visit the WLan card manufacture webpage and download the driver.
    Mode device -> you could try to install dome modem drivers published for other notebook series. Maybe it will work
    SM bus controller -> I presume this is a card reader. The same procedure like with modem device. Check some drivers published in other series
    By the way; This is a US notebook model so you have to search on Toshiba US page

  • Satellite Pro L300: WLAN is not in device manager and is missing

    Hi,
    I have a Toshiba L300 which I downgraded from Vista to WXP months ago. So I decided to stick with Vista and when I installed Vista the WLAN was missing in device manger and it didn't work. I tried downloading drivers adapters from Toshiba drivers download and still didn't work. Only my Ethernet is showing in device manager....btw I have a Realtek WLAN
    Also,my VGA graphics card doesn't seem to update driver and when it does it says that the system is below minimum specs.
    It's soo weird in WXP it was working fine..... Any solutions?

    >I tried downloading drivers adapters from Toshiba drivers download and still didn't work.
    What does it mean exactly? Have you installed WLAN driver or not? Is WLAN card installed properly and listed in device manager as Realtek WLAN card?
    How to understand you?
    Have you problems to install WLAN card or to configure WLAN connection?
    If the WLAN card is installed properly enable the card with WLAN switch and then use FN+F8 key combination and be sure card is set to ON.
    Which display driver you want to install? Which version?

  • Satellite Pro L550 - WLAN doesn't work after new Installation Win 7/64 Pro

    Hi,
    I installed a real Win 7 / 64 professional full version on my Sat Pro L550-199, PSLW9E. Now I can't switch on my WLAN. The big FN-bottons doesn't exist. I tried lots of driver I found on the Toshiba Support page.
    Whitch is the right, or is Win 7 / 64 professional not supported with WLAN?
    How I can switch on WLAN without the FN-Key?
    Lenny

    Hi Lenny-27-7,
    Is your WLAN card installed properly in device manager? It must be listed under network devices without yellow exclamation marks. So you can make sure that WLAN card is installed.
    For all FN keys you have to install Value Added Package and Flash Cards Support Utility. Both tools can be downloaded on official Toshiba page where you can find the WLAN driver too:
    http://eu.computers.toshiba-europe.com > Support & Downloads > Download Drivers
    If you have installed everything you can start with WLAN configuration :)

  • Satellite A300D-11v - WLan card doesn't work under Win XP

    Ive problem. Im looking everywhere and i dont know whats happened.
    I have installed XP and Ive problem with WLAN. Before Ive used Vista and was ok :)
    I took driver for RTL8187b from
    http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=1&PFid=1&Level=6& Conn=5&DownTypeID=3&GetDown=false&Downloads=true#R TL8187B
    and tried from official Toshiba website.
    In device manager everything is ok, but I cant connect.
    This doesnt work:
    "The WLan card is from Atheros and not from Realtek! The LAN card is Realtek but not WLan card!
    The Atheros driver can be found here:
    http://aps2.toshiba-tro.de/wlan/
    Can somebody write me step after step how this fix.
    Please help me and sorry for my English :)

    >Also can try reinstalling the drivers than appear in this web site, here appear the Atheros Drivers than your notebook need.
    Your notebook doesnt support Atheros card but Realtek WLan card.
    >In device manager everything is ok, but I cant connect.
    As you said the WLan card was recognized properly but you cannot connect.
    Why?
    Im not sure why but you should firstly check if your WLan router uses the same WLan standard (802.11 A B or G) like the WLan card.
    Check the settings!
    Then check if the right WLan encryption has been chosen, check if the Mac address was not enabled, check if firewall doesnt affect the WLan connectivity.

  • Satellite L750-1RV WLAN deactivated after boot or sleepmode

    Hello,
    last week I deactivated WLAN adapter via Fn-F8. After that I swichted it on via Fn-F8 and it worked again.
    But after Sleepmode WLAN didn't work.
    Looking on Fn-F8 it shows "On". Either I have to switch "off" first and than switch"on", or I choose "all on" (WLAN and Bluetooth) to have WLAN working.
    After having a look in forums I checked for new WLAN driver and I tried to deactivate in DEVICE MANAGER the option "Computer can switch off this device in order to save energy" (sorry, this is my translation from german Windows). But nothing does help.
    WLAN is still not active after boot or after sleep mode.
    Pls advice.
    Thanks and greetings!

    Hello paolo30,
    thanks a lot for your help.
    *It is working in the meantime!*
    As already described was your suggestion my fist try already some days prior to my question in this forum - but without success.
    Yesterday I had a unusal long boot at startup.
    After login I had to start WLAN manual as it was in the last days.
    Then I read your message and realized, Allow the computer to turn off this device to save power was already unchecked due to my first action some days before. Then I toggled it and did restart again.
    Then in worked! After reboot WLAN was automatic working - as it should be normal.
    In the meantime I have this option unckecked again and I'm happy with it.
    Altough I'm not aware at all, what the rootcausewas, WLAN is working now from the beginning.
    Thanks a lot for your help!
    Greetings!

  • Re: Satellite L650-108 WLan shuts down when lid is close

    Hey, so it's all in the title people :)
    I got this wireless card ; RTL8191SE. Everything is great, internet is going fast etc ...
    But when I close the lid, is shuts down the internet :( which is not great when I wanna download someting pretty big
    How do I fix this ?
    I got the latest driver, I think : 21/05/2010 ... 2016.2.521.2010
    thx

    Hmm strange
    Did you check the settings in device manager -> Wlan card -> Properties -> Advanced tab?
    Here are also some drivers:
    Realtek page:
    http://www.realtek.com/downloads/downloadsView.aspx?Langid=1&PNid=21&PFid=48&Level= 5&Conn=4&DownTypeID=3&GetDown=false
    Toshiba Wlan proptal:
    http://aps2.toshiba-tro.de/wlan/

  • No Wlan card in device manager - Satellite Pro L300

    Internet works OK sometimes but then I get "no network.
    When I check I find the network adaptor (Atheros) has "disappeared from the device manager.
    If I restart the PC it reappears and I can connect again.
    I have defaulted the Bios and updated the driver but it makes no difference

    Firstly update the BIOS.
    After the BIOS update set the BIOS to default settings.
    Save the changes.
    Now install the latest WLan driver from this page:
    http://aps2.toshiba-tro.de/wlan/
    Reboot the unit and configure WLan again.
    Good luck!

  • Memory upgrade on Satellite A350-10I

    I have a Toshiba satellite A350 10I.I would like to expand the memory RAM which is 2x2Gb ddr2 800MHz.
    Can be changed with ddr3?The motherboard will support?

    I've thought about doing this and I have seen that there is a space for a second hard drive.But there is no connector on the motherboard to plug another one.Perhaps for this series is not provided.
    Do you know if this model has mSATA connector?I have seen on the web that there mSATA SSD.

Maybe you are looking for

  • BI-IP Characteristic

    Hi I want to add characteristic relationship to a BI-IP model. The help docs stats: 'We recommend that you derive your own class from the example class 'CL_RSPLS_CR_EXIT_BASE'. You then only have to implement the methods ‘CHECK’, ‘DERIVE’ and ‘CREATE

  • How can i debug a program attached with a Job schedule ?

    Hi experts, In a background job one program plus one variant is attached, now I don't have any authorization  of SE38. I want to debug the program. How can it be possible? Thanks in Advance, Abhijit

  • Automatic PO from PR - ME59

    Tick the automatic PO and Source List fields in purchase view of the material master for the vendors on whom you would like to release PO automatically. Create a purchase info record. Create source list. In the last column in the details screen of th

  • Selecting records from table A where A.date = max of date from table B

    Hi, I am new to OBIEE, How can I build the following Oracle query in OBIEE.... select a.F1, a.F2, a.F3, a.date from Table1 a where a.date in (select max(b.date) from Table2 b where b.F1 = a.F1 GROUP BY by b.F1) I tried Rank, Top, Aggregate however di

  • In SQL Server Agent jobs, how do you use @os_run_priority in a job step?

    After completing a SQL Server backup I need to take a copy of the backup file to another drive. I'm planning to use copy or xcopy, but I'd like to set the process priority to "low". I see there is an "os_run_priority" parameter to sp_add_jobstep so I