Satellite A350 - webcam quality is poor

Inbuilt webcam quality is poor (a350)
Is this normal for this computer?
Is even worse and switches to black screen only bright light shown at night on Skype.

Hi
The image quality could not be the best because of the dark room where you are using the webcam.
You should increase the brightness in the room and should set the webcam settings to night mode!
Check this Toshiba document:
+Poor picture quality when using the internal webcam under dark light conditions+
http://aps2.toshiba-tro.de/kb0/TSB8A02G80000R01.htm
or this:
+How to change the settings for the integrated webcam if the image is very dark or black+
http://aps2.toshiba-tro.de/kb0/HTD9402LC0000R01.htm

Similar Messages

  • X220 webcam camera is poor!

    I wasn't expecting stellar image quality from the integrated webcam camera on the ThinkPad X220, but I was expecting at least decent image quality, on par with other notebook computers, and I find the image quality to be very disappointing, best described as poor. Reviewers have also seen and commented on poor image quality (e.g., Lenovo ThinkPad X220 reviewed – adored for a bunch of reasons), so I assume this is due to poor hardware and/or software, not just a defect in my particular machine. Has anyone found any way to improve the image quality? Thanks.
    Hope that helps,
    John
    ThinkPad T450s [ i7-5600U | 8GB | 1TB SSD | Full HD IPS | 802.11ac | BT | Webcam | FR | Win8.1Pro64 ]
    Solved!
    Go to Solution.

    underst0rm wrote:
    Webcam quality is also poor under Linux - so it's probably just crapy hardware...
    I just noticed that there was some serious residue on my webcam camera lens (probably came that way from the factory), and after thoroughly cleaning it off with pre-moistened lens wipes, my image quality is now much improved, to the point that I now consider it decent, so try cleaning your webcam camera lens.
    Hope that helps,
    John
    ThinkPad T450s [ i7-5600U | 8GB | 1TB SSD | Full HD IPS | 802.11ac | BT | Webcam | FR | Win8.1Pro64 ]

  • Memory upgrade on Satellite A350-10I

    I have a Toshiba satellite A350 10I.I would like to expand the memory RAM which is 2x2Gb ddr2 800MHz.
    Can be changed with ddr3?The motherboard will support?

    I've thought about doing this and I have seen that there is a space for a second hard drive.But there is no connector on the motherboard to plug another one.Perhaps for this series is not provided.
    Do you know if this model has mSATA connector?I have seen on the web that there mSATA SSD.

  • HDD and memory upgrade on Satellite A350

    Hi All
    I have a satellite a350 laptop can anyone tell me whats the biggest harddrive I can have and memory please
    Thanks

    Hi
    The RAM upgrade depends on the available chipset.
    Not quite sure about your A350-xxx model but many of the Sat A350 notebooks were quipped with an Intel GM45 Express chipset and in such case you could upgrade the memory max up to 8GB RAM
    Regarding the HDD: This notebook supports SATA HDD. This mean that you are not limited to an special size.
    Theoretically it could be possible to use 500GB, 750GB 2.5 SATA HDDs

  • Satellite A350-13B - OpenGL and Radeon HD3650

    Hi
    My laptop is Satellite A350-13B with ATI Mobility Radeon HD3650.
    I found that I have OpenGL 1.1 (7/7) and partially 1.2 (1/8).
    I installed latest drivers from ATI site, modded with Mobility Modder (also tried drivers from Toshiba's site - without results).
    I found that modded drivers require OpenGL patch to have it working.
    You have to add:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\OpenGLDrivers\ati2dvag
    "Version"="2" %REG_DWORD%
    "DriverVersion"="1" %REG_DWORD%
    "Flags"="1" %REG_DWORD%
    "Dll"="atioglxx.dll" %REG_SZ%
    But after it OpenGL Extensions Viewer see the same values (1.1 and partially 1.2).
    How is it possible to check highest OpenGl version available and make it working?
    I have a file called atioglxx.dll in Windows\System32 and registry entries specified above, but OpenGL Extensions Viewer says:
    Renderer: GDI Generic
    Vendor: Microsoft Corporation
    Memory: 512 MB
    Version: 1.1.0
    Shading language version: N/A
    Max texture size: 1024 x 1024
    Max texture coordinates: 0
    Max vertex texture image units: 0
    Max texture image units: 0
    Max geometry texture units: 0
    Max anisotropic filtering value: 0
    Max number of light sources: 8
    Max viewport size: 16384 x 16384
    Max uniform vertex components: 0
    Max uniform fragment components: 0
    Max geometry uniform components: 0
    Max varying floats: 0
    Max samples: 0
    Max draw buffers: 0
    Extensions: 3
    GL_EXT_bgra
    GL_EXT_paletted_texture
    GL_WIN_swap_hint
    Core features
    v1.1 (100 % - 7/7)
    v1.2 (12 % - 1/8)
    v1.3 (0 % - 0/9)
    v1.4 (0 % - 0/15)
    v1.5 (0 % - 0/3)
    v2.0 (0 % - 0/10)
    v2.1 (0 % - 0/3)
    v3.0 (0 % - 0/23)
    v3.1 (0 % - 0/8)
    v3.2 (0 % - 0/9)
    v3.3 (0 % - 0/9)
    v4.0 (0 % - 0/13)
    v4.1 (0 % - 0/8)
    OpenGL driver version check (Current: 1.1.0, Latest known: 1.1.0):
    Latest version of display drivers found
    According the database, you are running the latest display drivers for your video card.
    No ICD registry entry
    The current OpenGL driver doesn't expose the SOFTWARE/Microsoft/Windows (NT)/CurrentVersion/OpenGLDrivers registry entry. Unable to detect the driver version, driver revision name and filename.
    No compiled vertex array support
    This may cause performance loss in some applications.
    No multitexturing support
    This may cause performance loss in some applications.
    No secondary color support
    Some applications may not render polygon highlights correctly.
    No S3TC compression support
    This may cause performance loss in some applications.
    No texture edge clamp support
    This feature adds clamping control to edge texel filtering. Some programs may not render textures correctly (black line on borders.)
    No vertex program support
    This feature enables vertex programming (equivalent to DX8 Vertex Shader.) Some current or future OpenGL programs may require this feature.
    No fragment program support
    This feature enables per pixel programming (equivalent to DX9 Pixel Shader.) Some current or future OpenGL programs may require this feature.
    No OpenGL Shading Language support
    This may break compatibility for applications using per pixel shading.
    No Frame buffer object support
    This may break compatibility for applications using render to texture functions.
    Few texture units found
    This may slow down some applications using fragment programs or extensive texture mapping.
    Extension verification:
    GL_EXT_color_subtable was not found, but has the entry point glColorSubTableEXT
    Thanks in advance for help.
    PS: I'm from Poland, so keep it in mind ;)

    I dont know how to this but please note that Toshiba supports own drivers only. When you install driver directly from ATI you are on your own and it has nothing to do with Toshiba.
    It is also recommended to use Toshiba drivers only.
    For more questions about ATI drivers please visit THIS page.

  • Issues with CD/DVD drive on Satellite A350-12D

    Hi,
    I just bought my Toshiba Satellite A350-12D laptop two weeks ago, and am generally pleased with it, however I cannot get it to read data-DVD's properly.
    When I try to read a data DVD that I burned on my desktop PC, the laptop starts to read but takes very, very, very long.
    When I try to copy the data on the DVD to my laptop, it takes forever (I've tried once for 45 minutes and then gave up) and after a while it starts claiming it can't read most of the files on the DVD.
    It's not the data on the disks that's causing problems, cause when I transfer those from my desktop to my laptop on a USB stick instead of a DVD, the files are copied immediately without a problem.
    At first I figured it might be due to the DVD disks themselves (I use TDK DVD+ROM), or maybe Vista was the culprit, but I've tried the exact same disks on my friend's Medion laptop that's also running Vista and she's having no issues whatsoever.
    Anyone have any ideas what could be causing this or better yet, what could solve it?
    Thanks in advance!
    Eva

    > When I try to read a data DVD that I burned on my desktop PC, the laptop starts to read but takes very, very, very long.
    Hmm I think this could be a problem of non-fully compatible DVDs.
    My notebooks drive couldnt read or write some DVDs from different manufacturers.
    I tested many disks and now Im using TDK DVD-R.
    But its always different. Possibly your drive would not support this disk properly but another disk would be supported better
    I think you should test it simply. There are many different disk manufacturers so dont give up buddy

  • Satellite A350 - How can I remove the password?

    Hi every one
    I am Col and I have just joint the site
    I have a problem with my Satellite A350
    I bought this laptop from a trusted auction,not on the net, with the password attached unfortunately this password dont work, but the auction house clams it does,
    What is happening is when I turn it on the first screen you see wants a password, I put in the so called password that was given to me but it wont work. When I try to get into the BIOS setup it still wants the password before I can continue.
    This computer is using Vista and I cant even put the Vista disk back in because the DVD drive wont work because the op system has not booted
    I hope some one knows how to by pass the password or can help me. I have tried removing the internal battery but no go, my email is [email protected] if you want me to explain things better
    Thanks to every one
    Col

    Hi Col!
    These are not so good news
    Im not a Satellite A350 owner but if you want to remove the password you should contact an ASP and ask for help. The notebook technicians are know how to remove the password and so I think they can help you at best.
    On the Toshiba website you can search for an ASP:
    http://eu.computers.toshiba-europe.com => Support & Downloads => Find an authorized service provider
    Bye

  • Satellite A350-07C - How to transfer movies from camcorder?

    Hi Everyone. Just wanted to know if anyone knows how I can upload movies from my Sony DCR-TRV19E that has USB and DV iLink slots into my Toshiba Satellite A350/07C?
    My understanding is that Sony does not support USB drivers for Windows Vista and 7 (and why not!?) which leaves me the Firewire which in this case is the iLink (DV) slot on the camcorder. Where do I stick this in the Toshiba? Does my Toshiba have a different look Firewire? I know that in my Device Manager I have something that is called ieee 1394 OHCI Complient. But where excatly is it on my model? Is it the little slot on the left that looks like the DV of my camcorder (it has a lable on the top that says EX on it)?
    Or is it through the PCI card slot that is on the left side (that also says on it EX)?
    Please help me?

    i have good experience with Sony camcorder and I can recommend you to use firewire cable.
    You are right this is this small DV interface. On your notebook there should be the same on the left notebook side.
    It is the first port placed near the USB port.
    Both devices have small 4 pin slot so buy right 4 to 4 pin cable.
    When you connect the cam just switch it and it should be recognized automatically.
    If you need more help let me know.

  • Why is the photo quality so poor since the iOS 7 upgrade?

    My iPhone 4S  took absolutely BEAUTIFUL pictures before the upgrade, and now they are just terrible. The quality is poor and before the upgrade my pictures were very detailed and crystal clear. I've tried different settings and lighting with very little improvement.

    I have had the exact problem, but with both the Apple earbuds and Skull Candy earbuds.  I have used the latter on my iPhone4 for months without any problems.  I have long phone calls and this will happen 10 - 30 minutes into a call, but seems to happen more frequently as the calls continue.  As you mentioned, if I pop into speaker mode and back out, the problem usually clears up.  I returned my original 4s after experiencing this problem, but my new one had this problem immediately.

  • Adding a second internal HDD on a Satellite A350-20s

    I have a Satellite A350-20s.
    It is described in its documentation as having the option to add a second internal 2"5 hdd, and a indeed there is a place reserved for it..
    The problem is that when I remove the cover to insert the hdd there is no connector.
    So, how to do it ?

    Hi buddy,
    Well, I have even checked the manual of my Satellite A350 and there you can see that the manual shows second HDD slot. But as Paolo30 wrote installing such a HDD is depending on the HDD controller You can only install such a HDD if you have a second HDD connector.
    In my opinion all its ok because the manual doesnt mention that adding a second HDD is possible on every notebook. ;)
    By the way: If you need more disk space you can use an external HDD, for example 2.5 one. Such HDDs dont need an additional power supply, you need only an USB cable to connect it. ;)

  • Pearl 8220 camera image quality is poor, poor, poor

    The photo image quality of the camera on my BB Pearl 8220 is extremely grainy and dark.
    I understand this is a cell phone camera and expectations are low to begin with, but this is unacceptably low quality.  The flash appears to function properly but that doesn't matter because the image quality is poor even for pictures taken in full sunlight.  
    Are there camera adjustments or settings that I haven't found that can remedy this problem?  The ones I HAVE found have had no effect.
    Thanks for any help.

    i've taken some good pics with our phones...
    I did notice that you need to be extremely steady (no built in "camera shake"), but other than that, its all been good. 
    I used the options to make the pics as large as possible too; but I do that with our digital camera as well.  I use Paint Shop to edit them on our PC.
    Where there is a will, there is a way...
    If there is no way; there is always a bigger hammer.

  • How can i improve burning quality of dvd.looks fine in preview on idvd,but final burn quality is poor/

    how can i improve burning quality of dvd.looks fine in preview on idvd,but final burn quality is poor.

    Had same problem with iPhoto pictures and poor burn quality. Went back to original picture file and dragged images into idvd project from there. Set encoding at professional quality and burned at slowest speed. Got very good result with high quality slideshow when played on TV.
    Also tried Old Toad's Aug 30, 2011 advice to get a slideshow into iDVD with transitions, music, etc. from iPhoto.
    Again the quaility of the burned CD was very good. 

  • Why when i create a collage to export to photobox is the quality so poor

    why when i create a JPG collage to export to photobox is the quality so poor?

    The only possible answer to such a generalized question is, "Because." You'll have to explain how you are creating the collage and the steps you have taken in order for us to provide you with any suggestions.

  • Sky Go sound quality is poor

    Sky Go sound quality is poor, hollow and reverb like, and happens with 'on demand', 'on now' and I assume also 'downloads'. Sky Go is a great concept and feature, but this sound issue significantly reduces your enjoyment and deters you from using it. Other broadcaster apps work fine for me, When will this Sky one be fixed?

    just to clarify on Omicron's comment "Used Sky Go on my iPad 4 iOS 7  -  no sound problems; " - Do you actually mean no problems, but the sound quality is still poor? The point of this thread is to highlight the ongoing poor sound quality in Sky Go across all platforms, which many people on here suspect is due to overcompression. Could you confirm you are still having these issues, otherwise i am worried moderators may suspect the issue is fixed, which i can confirm from an episode of Blacklist on the train this morning is certainly not the case. Sound is still tinny, quiet and washed out on any downloaded porgram on iOS. Any news on if a fix for this is going to be in an update any time soon???  Omicron wrote:
    Hi, Further to my earlier response I have now done the following: Used Sky Go on my iPad 4 iOS 7  -  no sound problems; Streamed a short film from You Tube using my PC - no problems; Installed the BBC iPlayer on my PC and streamed Atlantis - no problem. So I'm reasonably confident that: The sound card on my PC is behaving itself; There is no problem with the original recording on the BBC; There i no problm with the Sky recording on my iPad. One possible conclusion is that Internet Explorer 11 version 11.0.9600.16384, and Google Chrome Version 30.0.1599.101 m working under Windows 8.1 64 bit are not fully compatible with Sky Go. Bob   

  • Satellite A350 - wireless is not working

    Hi, I have a Satellite A350 running Vista 64
    I'm having problem with my wireless not working and light (next to switch) not turning on, even though the switch is on. I have had this happen quite a few times and easily fixed it with FN+F8. Although, now FN+F8 does not exist, e.g. when holding down the FN key, there is no F8 (wireless) option available. I have updated to the latest drivers of both the Realtek network adapter and BIOS. Neither have fixed the problem.
    I consulted the Toshiba Manual and discovered, "If no wireless communication device is installed, no dialog box (FN+F8) will appear." When I looked at the Device Manager, the network adapter (Realtek) was working properly.
    I have also tried numerous system restores in an attempt to undo any update which may have caused the problem.
    What else can I do?

    Hi.
    I've posted the same problem in thread :
    "Satellite L450D - Wireless network adapter has disappeared"
    Also, from thread "Wireless quit working" :
    "My wife has a Satellite L305-S5968 which she bought last month. The wireless had been working fine until she returned from a vacation (where she used the wireless at her brothers home). Once home, it quit working. Coincidently, we started getting a USB Device Not Recognized message. I looked in Device Managers and did not find any wireless adapters under the Network Adapters. There is a Realtek Ethernet adapter listed. So I tried a Ethernet cord and got connectivity immediately. What can I do?
    My wife called Toshiba support. Here it turns that when the goes to sleep or the battery gets overcharged, it causes the hardware to malfunction. She had to take out the battery, pull the power cord and hold down the power button to discharge any remaining power in memory. She reconnected the power cord, powered up, uses F2 to go to setup utility and did a restore of all original hardware settings (with F9). Everything worked (we were not aware at the time but the printer and corded mouse were not working either). We are back in business. Maybe this will help someone else."
    I saw these too late, my laptop had already gone back to Currys. I've just been called to say I can pick it up, this has been fixed!
    Steve.

Maybe you are looking for

  • How to back up emails saved to iPhone when email account no longer exists

    I have a large number of emails that are on my iPhone 5 that I cannot afford to lose. The email account that they were downloaded from used to be a work email account but I no longer have access to it. I want to update my iOS to 7 but I am afraid tha

  • Shortcut keys not working on my iMac (Lion) keyboard?

    this happened late last week. my shortcut keys worked fine, but now nothing is working ( ©c, © a, © , etc.). tried restoring back to default in system prefences and repaired the HD in disc utility, but no luck. is this just a bug that apple need to f

  • F4 help taking more time

    Hello All, While selecting vendor from variable selection screen of a query is taking lot of time and finally ends with an error message " program terminated". When i execute query and try selecting vendor from selection screen i am able to select bu

  • RSIMPCUST - Some currency is not imported

    Hello, I am facing a strange problem. I am using the RSIMPCUST program that I launched via RSA1>Source Systems>Right-click on a source system>Transfer Global Settings. THe program transfer some currencies but not all !!! For example I have a VEF curr

  • Unable to import DataProvider

    If I open a new Flash (AS3) file in Flash CS3 Professional and try to import DataProvider (import fl.data.DataProvider;), I consistantly receive a compiler error (1172: Definition fl.data:DataProvider could not be found). Does anyone know what the pr