Satellite A50: Cannot boot from the Recovery CD

I have a toshiba satellite a50 when i try and recover back to factory settings but my computer doesnt recognise the cd and it doesnt boot from the recoverey cd can someone help i explored the cd there is is a file with extension .gho i really need to format my pc

Insert the CD into you drive.
Then press the power button and start the notebook.
For booting from the CD you have to press the C button immediately after notebook starting.

Similar Messages

Satellite M45: Cannot boot from CD-ROM or HDD

I'm getting the following messages...
WHEN BOOTING FROM HDD: "Invalid partition table"
WHEN BOOTING FROM CD-ROM: "No Bootable CD in ATAPI CD-ROM"
Consequently, even though I have the recovery CDs the computer cannot read them.
I tried changing boot order to no avail. Created a Bart's bootable CD which works in my other computer but not in this laptop. Are there special drivers I need for this CD-ROM?
I am at wits end on this one.
Thanks

Hi
I think your partition on the HDD is corrupt and therefore you cannot boot from the HDD.
In such cases the HDD should be completely formatted and then you could try to install the OS.
It seems also that your drive cannot recognize the bootable CD (WinXP???) and therefore its not possible to boot from the drive.
Well, its really stupid situation :_| really stupid!
However, did you try booting from other CD? For example original Microsoft Windows CD?
If not I would recommend to do it and possibly the drive will be able to read the other CD.
If not so I think the drive must be checked. Possibly its also corrupt.

Satellite A200 - Cannot boot from Recovery disk - code 1

I have Vista business and my laptop is currently running slow and is full of rubbish.
I have in the past used my recovery disc to completely re-install vista and start from a fresh version.
However, i have tried this time and it says that it cannot boot from cd - code 1.
Can someone tell me what this is and how to re-install vista?

Hmm... so its definitely not a ODD issue but there is something wrong with the shipped CDs. From my knowledge this error would appear if the CD would NOT be bootable!
Its strange for me that this notebook has been preinstalled with the Vista business.
Usually the notebooks are preinstalled with Vista Home Premium and usually you have to create the own Recovery disk using the preinstalled tool called Toshiba recovery Disk Creator.
Anyway, if you are not able to boot from these disks then you would need other disks.
You could order it from the ASP in your country or from this page:
https://backupmedia.toshiba.eu/landing.aspx
Cheers

Satellite U925t cannot boot from USB

Hi
I cannot boot from USB flash drive on Satellite U925t. I use bootable USB flash drive inserted (Hiren Boot 15.2, sure booted on another laptop), restart the system. When the splash screen is displayed, press F12 to access the boot menu, selecting USB - but laptop no boot from USB.
Please, Help me.
Thank you very much

From within Windows, try holding SHIFT when you select Shut down. Is there any change then?
Also, try entering the UEFI settings, disabling Secure Boot, and changing UEFI to CSM.
- Peter

Satellite C660 -cannot boot from ODD

hi all
hope someone can help me with this.
I'm trying to put a new hard drive in a C660 but cannot get to the 'boot from cd' option no matter what i do.
If i press F2 i get the windows boot manager with one option.
Windows 7
If i go to F8 i get Advanced boot options.
Safe mode ect. No CD option
F12 takes me to Windows error recovery with 2 options
Launch setup repair ( recommended )
Start windows normally
Also tried 0 on powerup, that just gives F2 and F12 options.
Can anyone tell me how to get to boot from the cd?
many thanks

I have the samete laptop but I have faced diffirent problem.
My problem was the computer does not starts when I turn on it will show me the notfication of "toshiba leading innovation " and it authomaticaly blinking again and again with out opening.
I have tried to reboot from cd by F12 and selection cd/dvd option then it does not show any thing rather it will load files and finally "black screen and cursor "
Please please I need help .
I am exchange student in FInland from ethiopia , africa. I cant do my exercise and read help help

HT4718 if i boot from the recovery disk, will my files be erased?

Cannot load OS.

No, they won't. But, if you can't boot because the hard drive is bad, then you may have already lost your files.
If it won't boot into the Recovery HD, then try Internet Recovery (cmd-opt-r). If it can't boot to Recovery HD, then it should switch to Internet Recovery, but those keystrokes will go there directly.

Satellite P cannot boot from CD & PXE-E61 Media Test failure

No bootable CD in ATAPI - CD ROM message on power up.
Also displays PXE-E61 Media Test failure, check cable. PXE - M0F: exiting PXE ROM.
Bad feeling about this.
Can you confirm my worst suspicions please.

Hi
In most cases the HDD is dead and you will need to replace this.
The PXE Media Test failure message appears because the unit ties to boot from LAN.
I think you tried to boot from the disk but the disk was not readable and the unit switched to HDD.
But the HDD is not bootable and therefore the notebook tries to boot from LAN.

TS2570 I have this problem too I cannot boot from the startup disc and the install DVD theat came with the computer cannot be seen by the MacBook and refuses to eject van anybody help? I cannot open in Console as the error message I get says files are in

Grey screen appears at startup the install disc is not recognised & will not eject every boot is met with grey screen revolving apple logo&folder&circle with diagonal and console error says start up item is in the trash also cannot access external FireWire drive please help. I also have a full copy of leopard if I can get the original install disc out perhaps it is corrupt tia

john13th wrote:
Ok, so this was done by Apple by purpose?
To clarify slightly what others have said, Apple licences the grey system discs that come with a Mac for use only with that specific Mac, not for use with any other Mac, even one of exactly the same model. So using them with any other Mac violates the terms of the license & should be avoided. The installer on the grey discs enforces this in part by checking the model of the Mac when it is run & refusing to install anything if the Mac is not the correct model. It displays a warning message that the disc cannot be used with that Mac & the only available option is to quit the installer.
Beyond that, while the grey discs may in fact include & install drivers for the hardware in other, older Mac models, they cannot include ones for Macs using hardware newer than the release date of the Mac they came with. In this case, the other Mac can't even start up from the installer disc & it freezes with a kernel panic before it can run the installer. This seems to be what happened here.

Satellite L - Cannot boot from CD/DVD

Hi,
I have the following problem u.z. I can not boot from CD if I notebook. reboot and press F12 I only have to choose from hdd and lan, cd drive it shows me not.
In bios if I go to the boot strip, he shows me first second hdd 3rd drive lan, but before the drive name, he has an exclamation point because I can not change anything.
Currently using windows toshiba 7 of which I got with the laptop and now want to install another windows 7 because I partition with the toshiba windows he can not erase me off the whole plate.
Please help

I can not so good english sorry. I translate the lyrics I write now using Google language tools:).
So it is, bios recognizes my cd / dvd drive already, but before the drive name is an exclamation point in front, for example before it looks like this:
* now *
* Fujitsu HDD *
*! Toshiba DVD ROM *
* FDD *
* LAN *
before
* Fujitsu HDD *
* Toshiba DVD ROM * <--- look here
* FDD *
* LAN *
I think it has something to do with the exclamation mark, because before that it was not there. When I start windows I can use my DVD drive as normal.
The first format was not a problem, I could boot from windows dvd, only, I have the notebook during the operation is canceled, since I can not boot from DVD.
I hope I could express myself.
thanks in advance
Notebook Specifications:
Toshiba Satellite L550-136
Windows 7 32bit

My Windows wont boot from the Recovery USB

Hi,
I created a recovery USB and when pressing f12 at start it does show me the USB as boot option. But when I select it nothing happens and it again shows me boot option.
THe space consumed by recovery media is 10.1 GB and it wont let me create it again . Any help will be greatly appreciated.

Hello, your installation disk is running under OSX??? If no the media has a problem!!!
1. Restart your mac and hold the alt (option key) to select media to install.
2. Restart you mac and hold the "c" key to boot.
an other solution is to make a partition on the hard drive and put a restore image of the Mac os X Installation dvd inside it then Restart your mac nad hold the "option" key and you will see the partition with mac os x installation and you can make a new installation from there.

HP 2000 cannot boot from cd rom

I have made a DVD boot disc, but cannot get my HP 2000 to boot from CD ROM. I altered the bios setup to enable boot from CD ROM and I made CD/DVD the first boot option. I also have tried F9 to enter the boot options menu. I do not see an option to boot from CD ROM. How can I get my HP 2000 to boot from CD/DVD?
I am messing around with the TAILS operating system. My ultimate goal is to boot TAILS from the DVD drive. I also have tried booting tails from USB, but after reading a while on this issue I have read that some HP machines do not support booting from USB.

I need to resurrect this thread. Still cannot boot from the CD drive. I have verified my boot disc, so the problem is with the laptop. Same setup as I noted above regarding bios and OS.
Laptop is HP 2000-2d60DX
Bios is INSYDE F.45, 2/10/2014
My basic problem is still that when I enter the boot options menu, boot from CD/DVD is not an option.
While researching I did come across this post, http://h30434.www3.hp.com/t5/Notebook-Recovery/How-to-boot-from-USB-with-the-new-uefi-bios/td-p/2552... It states that legacy boot needs to be enabled. However, when begining to enable Legacy Boot I receive the warning that the laptop will not be able to boot the OS (Windows 8.1), so I cancel changes. I would prefer not to have to enable/disable legacy boot everytime I try to switch between Windows and TAILs.
At this point, it would help to confirm that I have the needed version of the Bios (guess I should call it UEFI). Also, clarify if enabling Legacy Boot is needed.
Thanks.

Portege Z830 - cannot boot from DVD

I have a Portege Z830-11F. I upgraded my machine to Windows 8 and but i didnt like it. So i decided to make a clean setup of Windows 7.
I downloaded the .iso file from internet and burned it to a DVD.
I plugged in my external DVD player, restarted, entered BIOS and changed the boot order and restarted again.
All went well and i was able to install Windows 7.
But i didn't had the drivers, (thought the OS would recognize the LAN driver at least, i was mistaken)
So i upgraded to Windows 8 again (without restarting) just to download the drivers for Windows 7.
I did so, but now i cannot boot from the DVD.
When i enter the boot order section, sometimes the DVD is listed, sometimes not.
In both cases the machine boots to Windows 8 straightly, does not allow me to boot from the DVD.
The strange thing is i was able to boot from the same DVD in the first place.
What can i do to boot from the DVD?

At first I must say that I dont understand why you didnt create recovery media before you have changed anything. Using preinstalled Toshiba recovery media creator you could create recovery USB and the whole situation would be not so complicated. This recovery image is activated but now if you install own OS version you will not be able to use product key that you got with your notebook.
Anyway, now perform complete Win8 shutdown and after doing this start notebook and use F12 to enter boot menu. Of course your external DVD must be connected before you start your notebook. it can be that external drive will be listed on USB boot option like on my U940.

Help: Cannot boot from leopard disc anymore, everything else fine

I was working on an ibook and messing with it in firewire mode and was going to install leopard on it that way from my macpro. (just letting you know the context)
I tried to restart my machine(mac pro) and boot leopard both by pushing C and by running the installer.
I get the "You need to hold the power button panic message" everytime I do this. I unplugged external devices and tried this also and it has the same problem.
I cannot boot from the dvd anymore. If I eject the disc, osx loads normally.
Any ideas what I can do? (I have tried safe boot, pram clearing and hold option on boot to check options)
Here is the kernel panic when it finally loads into osx.
here is the kernel panic log when it reboots into OSX
Sat May 17 14:13:09 2008
panic(cpu 1 caller 0x001A7BED): Kernel trap at 0x894ec373, type 14=page fault, registers:
CR0: 0x8001003b, CR2: 0x00000018, CR3: 0x00df8000, CR4: 0x00000660
EAX: 0x00000000, EBX: 0x00000000, ECX: 0x00000000, EDX: 0x0a5a1004
CR2: 0x00000018, EBP: 0x817c3bc8, ESI: 0x0a4c5c00, EDI: 0x0a4c5c00
EFL: 0x00010246, EIP: 0x894ec373, CS: 0x00000008, DS: 0x0a3c0010
Error code: 0x00000000
Backtrace, Format - Frame : Return Address (4 potential args on stack)
0x817c39d8 : 0x12b0e1 (0x4555b4 0x817c3a0c 0x133238 0x0)
0x817c3a28 : 0x1a7bed (0x45e568 0x894ec373 0xe 0x45dd24)
0x817c3b08 : 0x19e517 (0x817c3b20 0xa83c980 0x817c3bc8 0x894ec373)
0x817c3b18 : 0x894ec373 (0xe 0x48 0x10 0x10)
0x817c3bc8 : 0x894db540 (0x0 0xa83c980 0xa4c5c00 0x1)
0x817c3c08 : 0x78d45139 (0xa4c5c00 0x1 0x0 0x13)
0x817c3c68 : 0x78d3e940 (0xa4c5c00 0x2407 0x817c3d2c 0xa4c5c00)
0x817c3c98 : 0x40c515 (0xa4c5c00 0xacd8130 0xacd8130 0x0)
0x817c3ce8 : 0x437535 (0xa4c5c00 0xacd8130 0xacd8130 0x0)
0x817c3d48 : 0x18c8aa (0xa4c5c00 0xacd8130 0x0 0x0)
0x817c3db8 : 0x12d165 (0xa525c78 0xaa76b90 0x817c3df8 0x11ee04)
0x817c3df8 : 0x126247 (0xa525c00 0xa2f9254 0xaad84b0 0x0)
0x817c3f08 : 0x196afc (0x817c3f44 0x0 0x0 0x0)
0x817c3fc8 : 0x19eb34 (0xab382a0 0x0 0x1a10b5 0xa63f208)
No mapping exists for frame pointer
Backtrace terminated-invalid frame pointer 0xbffff378
Kernel loadable modules in backtrace (with dependencies):
com.apple.NVDAResman(5.1.6)@0x894d8000->0x89704fff
dependency: com.apple.iokit.IONDRVSupport(1.5)@0x78cc5000
dependency: com.apple.iokit.IOPCIFamily(2.4)@0x78ac0000
dependency: com.apple.iokit.IOGraphicsFamily(1.5)@0x78d36000
com.apple.iokit.IOGraphicsFamily(1.5)@0x78d36000->0x78d51fff
dependency: com.apple.iokit.IOPCIFamily(2.4)@0x78ac0000
BSD process name corresponding to current thread: WindowServer
Mac OS version:
9A581
Kernel version:
Darwin Kernel Version 9.0.0: Tue Oct 9 21:35:55 PDT 2007; root:xnu-1228~1/RELEASE_I386
System model name: MacPro1,1 (Mac-F4208DC8)

I really appreciate everyone's help.
I am certainly not above taking the machine in but I will say this.....
I have been building and working on PC's for 15-20 years. I have never once used or had the need for a repair shop. It is my hobby. I recently switched to osx to give the mac a try and I love it.
I will say that vista/xp has four times as many problems but at least i can fix whatever comes my way hardware or software.
Any more ideas how to settle this without making my first trip to the repair shop ever?...
Chad

Cannot boot from DVD since 10.4.6 update.

My Quad cannot boot from the Superdrive at all.Upon updating I decided to repair permissions from the DVD but everytime I got to the Apple logo the fans powered up,full tilt. I had to turn the Quad off from the power button and start up holding down the mouse, in order to eject the DVD.
As far as I remember, I allowed the computer to start up twice, and disconnected all peripherals whilst updating.
I've tried zapping the pram and resetting the nvram to no avail.I've inserted Disk Warrior and that will not boot. The computer runs fine from the HD (although there was one occasion when, briefly, a small OS9-style Mac monitor appeared with a question mark, then made way for a proper boot), but I'm really concerned at this problem. I do not want to wipe the system drive and start from scratch,since I've only just finished migrating a whole buch of software from another G5, and I have TV job looming.
Incidentally, both my other G5's and Mac Mini updated with no perceptable problems. Can anyone shed any light on this and, perhaps, offer a solution (other than a wipe ! ).
Thank you.
G5 Quad 2.5,G5's DP 2.5/2.0,Mac Mini Mac OS X (10.4.5) MOTU 2408's Mk3x3,24i/o,Hammerfall HDSP 9652x3

Any installation can theoretically cause harm. If you aren't backed up, you may be forced to use Target Disk Mode if you can't boot a DVD, or an external DVD burner that supports booting. Both LaCie and Otherworld Computing have external Firewire DVD drives that support booting. Target Disk Mode is described here:
http://docs.info.apple.com/article.html?artnum=58583
Fortunately when you boot via Firewire or use Target Disk Mode, you bypass the hard drive's bootloading software, which you don't when you use the internal optical drive.

[solved] cannot boot from dd usb and cannot install 64 with unetbootin

hi,
been trying to install arch for almost 24 hours now. i just cannot manage to setup USBs to boot from.
first i was using unetbootin, but when the device not found error came up i tried using the methods recommended in the wiki. however, my hp elitebook 2540p cannot boot from the usb created using dd or imagewriter. so i went back to unetbootin and figured out the error was that the syslinux.cfg file needed to have ../../ replaced by archisobasedir=arch archisolabel=KINGSTON. now however, i cannot seem to figure out how to install a 64 bit system. when i run pacstrap all packages have i686 at the end, which i assume means its the 32 bit one.
help
EDIT: ok i have now used 3 different USB sticks and run
sudo dd if=~/Downloads/archlinux-2012.07.15-netinstall-dual.iso of=/dev/sdd
on them. plugging them into the 2540p the laptop just wont boot. it wont get past the first hp screen, where i normally press esc to enter the menu so i can choose boot options. the usb just blinks and nothing happens. this same problem happens with imagewriter in windows.
Last edited by iOfWhy (2012-07-29 13:01:10)

McDoenerKing wrote:Was the usb stick mounted, when issueing the dd command?
Did you use "of=/dev/sdx1" instead of "of=/dev/sdx" for the dd command?
Which image did you use?
i wrote exactly
sudo dd if=~/Downloads/archlinux-2012.07.15-netinstall-dual.iso of=/dev/sdd
as mentioned in the edit above, the computer wont get past the hp screen where one gets the option to press the esc key... the usb just blinks and nothing happens...
EDIT:
no the usb was not mounted...
the image was checked with both sha1sum and md5sum...
EDIT2:
ok so i think i am in... i reformatted the usb with fat filesystem, and then went through the second instructions from the wiki, ie installing "Without overwriting the USB stick"... But i am still wondering why i couldnt just do the normal dd method. Is it that the hp bios cannot read certain filesystems?
Last edited by iOfWhy (2012-07-28 13:39:40)

Satellite A50: Cannot boot from the Recovery CD

Similar Messages

Maybe you are looking for