Satellite A500 - Flash Cards don't work after Windows 7 upgrade

Hi,
I have a Satellite A500 PSAM3A-04200E. Recently I did an upgrade from Vista to Win 7. I used my system restore disks to reinstall Vista and then did the upgrade to Windows 7 using the upgrade assistant.
I find that I can no longer use the Fn key to enable/disable features..
I have tried downloading the VAP and running it. I have also tried the Start->Toshiba->Utilities->Restart Flash Cards. Neither of these have worked even after a restart...
Can anyone give me some pointers on what to do next?
Thanks

Hi buddy,
If you have already reinstalled Toshiba Value Added Package, you should also (re)install Flash Cards Support Utility. This tool controls the FN keys and is necessary to get them working.
You can download it on official Toshiba website:
www.mytoshiba.com.au
Check this!!!

Similar Messages

Satellite A300D-15B - Webcam won't work after Windows 7 upgrade

My webcam doesnt work after Windows 7 upgrade. I have installed the drivers but still having no luck

Hi
The webcam is listed in device manager under the Imaging devices
There you should see USB Video Device.
If its not listed there, then I think that the device malfunctions or its disconnected.
The webcam is an usb device and its connected to USB controller.
I read in different threads that in some cases the cable could be loose and therefore the webcam would not be listed in device manager.
I such case the display lid needs to be disassembled and the cables should be checked.
In my opinion its a job for an technician.

Satellite A205 - SD Card reader stopped working after Win 7 upgrade

Satellite A205-SP5818
I recently upgraded to Windows 7, and, among other things, the SD Card reader stopped working. I already downloaded and installed the driver offered in this site: http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/modelContent.jsp?ct=DL&os=&category=&moid=2190493& rpn=PSAE3U&modelFilter=&selCategory=3&selFamily=10 73768663 (it's the next-to-last driver shown) but it went from not working all together to making funny noices when I insert the SD card... and then not working.
Any ideas of other drivers that might work, or any kind of other solution?
Thanks.

Hi
Try to remove eh SD card controller from the device list.
Then reboot the unit.
After that windows will ask you for an driver.
You can download this driver:
[SD Driver, Flash Memory v2.0.0.7|http://cdgenp01.csd.toshiba.com/content/support/downloads/driver_cardreader_ti_25844A.exe]
You should unzip this package and has to point the driver files in this folder
This should helps to get the SD card reader working again

Satellite P300 - Quick launch buttons don't work after Windows 7 upgrade

I upgraded my Satellite P300 from Vista to Windows 7 professional. Initially everything worked fine, now for some reason the inbuilt microphone and the speakers do not work. I subsequently found that none of my 'Quick Start' buttons work, ie I cannot turn them ON or OFF, so perhaps the quick start Mute button is OFF, hence no sound. A computer check of the Microphone and the Speakers confirm that they are working so I guess the Mute button is On, no sound.
Is there any way I can get the Quick Start buttons to work again or turn the mute button OFF so that I can get sound. The funny thing is the speakers work if I use Skype, but I cannot play a CD.
Any help would be greatly appreciated.

Hi Dr Lamp
Thank you for your reply. After upgrading from Vista to windows 7 from the disc everything worked fine, a month later for some reason the sound just stopped. When I play a CD or select music from the computer and double click on the speaker icon I can see the music playing but there is no sound, it is muted, but why I do not know.
It is interesting that you Added Vista stuff because when I had Vista everything worked fine, I just didn't like it much. As I am a novice how did you add it. If I add something, does it run alongside Windows 7 or does it replace some bits. The reason I ask is that in Windows 7 the courser jumps around in Word making writing letters difficult, I have to disable the pointer when writing which is a pain.
Looking forward to hearing from you and thanks for your help

The multi level "isolation mode" don't work after the last upgrading to Illustrator CC 18.1.0? by the right mouse button menu

PROVA

Yes, I know that, but I ever work with the right mouse button,
because selecting groups and subgroups with double click make some confusion for me.
Regards,
Fabio
ufficio tecnico
grafica e prestampa
Via Verdi, 11 - 43058 Sorbolo (PR)
Tel. 0521.694111 - Fax 0521.694360
E-mail: [email protected] <mailto:[email protected]>
E-mail: [email protected] <mailto:[email protected]>
Web: www.litoexpress.it <http://www.litoexpress.it/>
Il giorno 28/ott/2014, alle ore 06:57, Satinder S Bains <[email protected]> ha scritto:
The multi level "isolation mode" don't work after the last upgrading to Illustrator CC 18.1.0? by the right mouse button menu
created by Satinder S Bains <https://forums.adobe.com/people/SatinderSBains> in Illustrator - View the full discussion <https://forums.adobe.com/message/6874053#6874053>
You can double click on the selected object to get into the multilevel isolation mode.
Regards,
Satinder
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6874053#6874053
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Illustrator by email <mailto:[email protected]m> or at Adobe Community <https://forums.adobe.com/choose-container.jspa?contentType=1&containerType=14&container=33 67>
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0 <http://forums.adobe.com/thread/416458?tstart=0>.

Beats Audio Control Panel software not working after Windows 10 upgrade.

Beats Audio Control Panel software not working after Windows 10 upgrade. the Beats sound enhancement is useless in WIndows 10. When opening the Windows 10 sound properties I'm getting this box message: Auido enhancement problem Windows has detected the audio enhancement for the following device are causing problems: Speakers / Headphones (IDT High Definition Audio Codec) Woud you like to disable driver enhancement for this device? IDT High Definition Audio CodecBeats Audio Control Panel version6.10.6491.02013.11.2009:43:18 Please provide some kind of fix for this?

Well, it has been a long road on the Win 10 upgrade. At first I got the same error message as above, but after deleting the Dolby Advanced Audio v2 in Win 10 using Control Panel Programs and Features and rebooting, I got into the continual BSOD upon reboot. Here are the steps I took to at least get stable on Windows 10. First, I rolled back to Windows 8.1 using the advanced feature in the BSOD recovery options. Once back in Win 8.1, I deleted the Dolby Advanced Audio v2 using Add/Remove Programs in Control Panel. Then I downloaded the Win 10 update and re-installed it. Once that completed, I updated the Intel Graphics driver under the display adapters (on my G780 it is an Intel HD Graphics 4000, and the driver can be found at https://downloadcenter.intel.com/). Currently I am running version 10.18.10.4252 for my machine. Then, under the Device Manager, I updated the Conexant SmartAudio HD driver under the Sound, video, and game controllers. That driver is currently at 8.66.4.50 and was automatically downloaded from the web when I requested to update driver. I also changed several others settings such as Notify to schedule restart after updates are installed instead of automatic (under Settings --> Update & Security --> Advanced Options) and Do you want Windows to download driver software and realistic icons for your devices? --> No, let me choose what to do, never install driver software from Windows Update. After that, I shut down the machine, waited a moment and booted back up. I have no idea why this helped or if it is overkill, but I am stable and running without a fear of rebooting now. Hope this helps if someone else is having this same issue.

IPhone 3GS apps don't work after 4.3 upgrade

Some apps like mail, safari, app store, ipod don't work after upgrading to iOS 4.3. itues is up to date and have never had issues before. tried to downgrade to 4.2 but was unable to. Help!

I have the same issue, half the apps no longer work, just stays in 'updating' mode. I've tried uninstalling some but now the app store is freezing. THe ones I am able to reinstall give me error message saying I'm not logging in correctly (I am). I'm guessing some apps versions aren't compatible with the new software but a few I was able to use after the software update and now I can't

Satellite P300-1CE - Microphone doesn't work after Windows 7 installation

Hi everyone.
At the beginning I'm sorry for my bad english so I will say shortly.
A few days ago I removed a few programs, and I installed the new operating system Windows 7. All over it I had to download new drivers of the camera, because they didn't work. After downloading drivers of the camera, the camera became operative (YEAH!), but later I worked out that for me a built-in microphone was out of order. What can be of it with cause and what driver to download and why microphone don't work?
I can't speak with friends on skype ;( Help me. I hope you know what I say.

Hello
Did you really install all drivers after Windows 7 installation? Maybe you have forgotton something and so it doesnt work.
Microphone is a part of webcam so make sure that webcam driver is installed properly and sound driver you need as well.
After this check the sound settings. Make sure that Microphone is enabled and test it again with enabled microphone boost.

HDMI Port not working after Windows 10 Upgrade

My HDMI port quit working after upgrading to Windows 10. The VGA port works fine. I have triend many of the fixes for listed for this issue for upgrading from Windows 7 to Windows 8/8.1. Here's whay I've done so far... 1) Downloaded the most recent drivers for my Intel(R) Graphics Card. Outcome: It said the drivers installed were newer than the driver I was installing. Tried anyway, didn't work. 2) Uninstalled the driver and let windows update it.Outcome: Black screen, then it restarted and installed the same driver it had before. 3) Tried installing the Windows 7 Driver for my Intel(R) Graphics Card. Outcome: Black screen, then it restarted and installed the same driver it had before. 4) At this point I tried the last resort. I spun around three times in a circle and spit in the corner.Outcome: Wife yelled at me and kids thought I had a demon. Please help, I use this computer in the office to connect to a 65" TV and I NEED my HDMI port.

Yeah, lot's of people on this forum have stated they have the same issue. It's not just people with Intel/AMD switchable cards either. I have an AMD 8650G + 8670M dual grapgics card and I am having the same issue.

Toupad Tapping and Scrolling stopped working after Windows 10 Upgrade

Hi, I upgraded my OC to Windows 10 today, after the upgrade tapping and scrolling stopped working on the synaptics touchpad. the toucpad only finctions as a pointer now. for taps/Clicks i always have to use the buttons below the touchpad. It was working fine before the upgrade, the earlier OS was Windows 7 I have checked for driver updates but i get a message that the drvier is up to date.I have check the device setting and confirmed that tapping and scrolling is enabled.I have also done a device reset. Nothing solved the problem, i also did not find a relevant answer on the forums.Also, the same problem did not happen with my other HP laptop (Notebook PC) which was also upgraded to windows 10 recently. Does anyone have a solution? Regards,Siddharth.

, Hello and thanks for posting on the HP support forums. What you will need to do is the run the Windows Update Fixer tool. Here is a link to help you with that. Make sure you run all updates including optional. Fix Microsoft Windows Update Issues If that fails to work the only other option is to roll your system back to the original supported operating system that came with your notebook. Thanks again for the post and have a great day.

HP OMEN Control Software No Longer Works After Windows 10 Upgrade

HP OMEN Control no longer works after the recent Windows 10 update. Profile switching, keyboard LED colors, zones, fn key options, etc. no longer respond at all. I've found references to this issue during Windows 10 beta testing. Is there a temporary workaround? Will there be a driver update to remedy this problem? Thanks.

I just purchased a new 2015 refurbished PC. It worked great with Windows 8.1. Upon installing Windows 10, The Omen control did not work as well as the fan. Really - hardware failure. Give us a break. So, I went back to Windows 8.1. Also this year, I purchased an Envy X2. This PC included a bluetooth keyboard that kept detatching. Again - REALLY, the keyboard doesn't work. That's a pretty important part of the PC. I searched the forum for answers and all I found was the same old line that HP was working on it. I found meesages over a year old that had this same problem. So, back it went to Best Buy. I used to really like HP computers, but now, I can't say that anymore. So, do I trust HP to fix this in a timely manner, NO. Why - because they had to know about this issue alrady for quite a while. And, they did not fix it. I really hope they prove me wrong.!! I will give them 1 more week to fix it. After that, the PC will be returned. And HP PCs will be off my scratched off my list, except maybe the HP Spectre X360. To my amazement, I am even considering a MacBook Pro. Funny thing - the Spectre X360 is supposed to be a great laptop, But, Microsoft was heavily involved in the design process. That is certainly not an HP confidence buider. HP - THIS IS YOUR TIME TO "STEP UP TO THE PLATE" and fix this mess. TImes like these are opportuniies to win over customers or loose customers to the competiion. I really want to keep this PC. It is by your response to this problem that will determine the outcome.

U405 s2833 Microphone doesn't work after Windows 7 Upgrade

Hi all,
I had done the WIndows 7 Upgrade for my U405 S2833, everything is working fine but the microphone doesn't the drivers are installed and it appears at the device manager, msn, skype and some other IM programs but it just doesn't work, I had downloaded all drivers till date, but nothing seems to work, any idea?
Regards

Satellite L305-S5970
You may want to experiment with these drivers. The most recent is not necessarily the best fit.
   Realtek Audio Driver for Windows 7 (32/64) (Version 6.0.1.5904 - Released 09/04/09)
   Realtek Audio Driver for Windows 7 (32bit/64bit) (Version 6.0.1.5859 - Released 07/13/09)
   Realtek Audio Driver for Windows 7 (32bit/64bit) (Version 6.0.1.5789 - Released 06/25/09)
-Jerry

Z580 Dolby digital plus not working after Windows 10 upgrade

Dolby Digital Plus is not working after I installed Windows 10 upgrade, I've tried several things to fix the problem with no luck, has anyone else experienced the same problem and found a fix ???

Hi,I have tried by switching dolby on but its not showing any difference. The app is installed but not working you can do on/off, set equlaizer but it doesnot show any effect. Recently i have upgraded to windows10.I used to love the Dolby experience but now its not working and its really disappointment for music lovers & gamers. Please provide any help on this issue. ThanksGopal

Portege M750 - Tablet doesn't work after Windows 7 upgrade

Got an Windows 7 upgrade through Toshiba for my M750 tablet pc. Everything went smooth and seems to be working, except (!) the tablet functions. The pen is not recognized. Touch a little bit, but unpredictably.
Please advise what I can do.
Thanks

Hi
Are all devices recognized properly in device manager? Have you checked this?
As far as I know you have to install or update the Dual Touch driver. This dirver is for the Digitizer and touch screen model. It enables the functionality that the Tablet PC Pen or finger can be used as a pointing device.
You can download this driver on the Toshiba website.
Check this!!

Why the flash player don't work after installing the video downloader add-on?

I've installed and uninstall the Firefox mobile app several times to try and fix this issue. Every time I add the video downloader add-on the flash player won't let me tap to play videos anymore. I've tried to completely enable the flash but still didn't work. I've used this add on for a few months and it worked fine up until the last Firefox update. Without the add-on the flash player works fine but after I've added the video downloader add-on I would have to uninstall and reinstall the mobile spot to get the flash to work again. I really love to use this add-on that's the advantage that Firefox mobile app has over other web browser. Please tell me how I can fix this issue. THANKS

Hello FRYDAE
Welcome to SuMo help Forum,
Thankyou for reaching us here
About your problem , have you tried to clear your privacy/browsing data? And see if flash works?
And you can try to disable the add-on, if you don't want to use it . and enable it again if you want to download a video .
Cheers!

Satellite A500 - Flash Cards don't work after Windows 7 upgrade

Similar Messages

Maybe you are looking for