Satellite A500 Nvidia Display Driver 404 - Not Found

Hi,
While trying to download this driver I keep getting a 404 - Not Found message:
http://support1.toshiba-tro.de/tedd-files2/0/display-20100608163635.zip
Anyone else having this problem?

hi,
> While trying to download this driver I keep getting a 404 - Not Found message:
> http://support1.toshiba-tro.de/tedd-files2/0/display-20100608163635.zip
It looks like the temporary server malfunction. You can try it later.

Similar Messages

Satellite A500-1GH - display driver stopped responding and has successfully

My laptop is the A500-1GH and I bought it 2 days ago...
My problem is that for the fourth time the monitor went black and then recovered and I'm getting the message "display driver stopped responding and has successfully recovered". My graphics card is the Nvidia GeForce 330.
I would appreciate it if someone knows what should I do to fix this
Thank you in advance

Hi Guys,
I have experienced _*both*_ problems with my A500/O2J with the NVIDIA GeForce GT 330m graphics card. Only purchased it Monday 15th February. Everything came factory installed except Office Professional 2007.
Set it up on Tuesday and it happened within 2 hours of set up, then again on the Wednesday. On the first 2 occurrances the display went black and recovered after a few seconds with a message along the lines of "graphic card driver has stopped responding and has successfully restored" then today (Friday 19/2) the screen went black and didn't come back on. I thought it had gone in to sleep mode but pressing the power button did nothing. After about 20 minutes I got the Blue Screen saying the system was shutting down to prevent unecessary damage and it then proceeded to restart.
I'm computer illiterate when it comes to this technical stuff and rang the place of purchase who told me to ring Toshiba (133 070). Of course being in the West they are closed so I will have to wait until Monday (1st day back at Uni).
Not off to a good start....so i hope this problem can be rectifed quickly and without too much fuss.
My computer specs are as follows;
A500/O2J
Intel Core i5 processor
Windows 7 Home premium (32 bit)
4GB memory
500Gb Sata storage
NVidia GeForce GT 330M graphics
Karmon/Kardon speakers
Everything came factory pre-installed except printer and Office Professional 2007 but both were installed after the problem occured the first time.
Message was edited by: janette73

Satellite A500-1GL: display driver issue - BCCode: 117

I keep getting a problem with my laptop where the screen will go black for a second or two, and then come back on.
I used to get an error message appear saying there was a problem with the display driver, and found the following error listed in the action centre of the control panel;
Source
Windows
Summary
Video hardware error
Date
?09/?07/?2010 23:22
Status
Not reported
Description
A problem with your video hardware caused Windows to stop working correctly.
Problem signature
Problem Event Name: LiveKernelEvent
OS Version: 6.1.7600.2.0.0.768.3
Locale ID: 2057
Files that help describe the problem
WD-20100709-2319.dmp
sysdata.xml
WERInternalMetadata.xml
Extra information about the problem
BCCode: 117
BCP1: FFFFFA800441D010
BCP2: FFFFF8800FF7DF9C
BCP3: 0000000000000000
BCP4: 0000000000000000
OS Version: 6_1_7600
Service Pack: 0_0
Product: 768_1
I've updated the drivers directly from Nvidia, as I have the Geforce GT 330M, this has stopped the error message from appearing, but the screen still goes blank. Does anyone have any ideas how to solve this?
Also, a seperate little question, sometimes my laptop will automatically resume from hibernation (I don't use sleep mode) when I open the lid, without pressing the power button. However, most of the time this will not happen, and I have to press the power button instead. Why will the computer do this sometimes, but not others? Can anyone tell me how to get the laptop to turn on by just opening the lid, 100% of the time?
Thank you for your advice.

Hi
Regarding the black screen issue;
You used the driver from nVidia this is not advisable due to the missing overheating protection. You should use the driver from the Toshiba page.
Please check also if the BIOS is up to date.
If newer BIOS is available, please update this I read in some threads that this could help to solve such issues
Regarding the automatically resume from hibernation;
You should check in BIOS if the Wake up on LAN and Wake up on keyboard options are disabled. If both or only one is enabled, then disabled this, save the changes in BIOS and reboot the unit
Good luck

Satellite A500-1GL - Display driver update

Recently l have been having issues with an online game and latency.
As part of the support l received they pointed out that my display driver is old and that there are more up to date ones on the NVIDIA site.
However from looking on Toshiba they still list the driver as being the one from 2010 which l have installed.
Can any one please advise me,
Can l update the driver from NVIDIA?
Or does it have to be the Toshiba one that l currently have from 2010?
If l can do the NVIDIA one can any one guide me through how l go about doing it?
(the card is a GeForce GT 330M card)
Many thanks for any help :)

> Can l update the driver from NVIDIA?
Here is a thread about the similar theme:
http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=74123
The point is that nVidia or ATI drivers can be installed but only at your own risk and this requires an Advanced installation procedure via device manager.
But I found out that different Toshiba notebooks were equipped with the same graphic chip.
For example:
+Sat A660 PSAW3E+
+Sat A665 PSAW3E+
+Sat P500 PSPGSE+
Usually the graphic driver released for these models should be compatible with you A500 model
Try it out

Satellite A500-1GL - Display driver crashes

Hi!
I have a *Toshiba Satellite A500-1GL*, which always crashes the video driver. Always comes "The driver has been restored after a failure," or something like that.
Have the unit in March 2010 purchased new.
What can I do about it?
Please help!
Thanks in advance!
psp

Hi psphc11,
If you would use the forum search, your question would be already answered.
Did you use the forum search?
Here are some results of forum search they are useful for you:
http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=53955
http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=51062
Check this!!!

Satellite 2430-402, Display Driver Problem

I have a Satellite 2450-201. Very often when the system comes back from Hibernate the system will not re-boot, it gets stuck after the opening logo. I have to shut it off and then then got to safe mode, and then restart. I get a message that the system has recovered from a device failure and it identifies the Nvidia Display Driver as the culprit. I have re-loaded the latest Driver from Toshiba, but if I try ANY update from Microsoft the Display goes crazy, and I have to go throught the re-boot and safe mode thing again. Any ideas on what the problem may be?

Good evening ! I had this problem with my Satellite 2430-402. Ive updated the Bios and all was fine.
Did you checked your Bios Version at first ?

Error Message: The attempt to connect to the report server failed. Check your connection information and that the report server is a compatible version. The request failed with HTTP status 404: Not Found.

I have a web page that contains a ReportViewer control. I am trying to display a report, which is an .rdl file located on the SSRS server, in this ReportViewer control. I have set the ReportPath and ReportServerUrl correctly. I am
getting an error message.
Am I suppose to use an .rdlc file rather than a .rdl file? Does the web server configuration need to use a certain account?
I am getting the following error message:
The attempt to connect to the report server failed. Check your connection information and that the report server is a compatible version.
The request failed with HTTP status 404: Not Found.

Hi bucaroov,
The error "The request failed with HTTP status 404: Not Found." means the ReportServerURL configured in the ReportViewer control is invalid.
Please follow these steps to solve the issue:
Logon the Report Server machine.
Open the Reporting Services Configuration Manager.
Copy the Report Server URL from 'Web Services URL'.
Logon the application server(in this case, it is the server that host the web page), check if we can use the URL we got from step 3 to access the Report Server. If so, please replace the ReportServerURL in the ReportViewer control with this URL. If it is
not available, could you please post the error message.
Additionaly, we don't need to provide the extension for a server report. The ReportPath should be like: /<reports folder>/<report name>
For more information, please see:
Walkthrough: Using the ReportViewer Control in Remote Mode:
http://msdn.microsoft.com/en-us/library/ms251669(VS.80).aspx
If you have any more questions, please feel free to ask.
Thanks,
Jin Chen
Jin Chen - MSFT

EPM 11.1.2.3 ,Error 404 - Not Found

Hi All,
I am getting the following error after my installation and configuration of EPM 11.1.2.3 and when I try to access the Workspace URL.
Error 404--Not Found
From RFC 2068 Hypertext Transfer Protocol --
HTTP/1.1:
10.4.5 404 Not Found
The server has not found anything matching the
Request-URI. No indication is given of whether the condition is temporary or
permanent.
If the server does not wish to make this information available to the client,
the status code 403 (Forbidden) can be used instead. The 410 (Gone) status code
SHOULD be used if the server knows, through some internally configurable
mechanism, that an old resource is permanently unavailable and has no forwarding
address.
I installed 11.1.2.3 in windows 7 ultimate OS and 64 bit and using sql server 2005 Database and configured Essbase,planning, hfm, arm, fcm,fdm ,hpcm, , everything was configured successfully but when I open the workspace URL it is throwing "Error 404 not found"
I tried accessing http://machinename:7001/console (I replaced machinename with my machinename)
even here I am getting the same error, but I checked the database and it has the table hss_component_types and it is populated with the various products.
could you guide me
Regards,
SG
The following is the error I am getting in C:\Oracle\Middleware\user_projects\epmsystem1\diagnostics\logs\services
<Jul 9, 2013 7:30:18 PM CDT> <Info> <Security> <BEA-090905> <Disabling CryptoJ JCE Provider self-integrity check for better startup performance. To enable this check, specify -Dweblogic.security.allowCryptoJDefaultJCEVerification=true>
<Jul 9, 2013 7:30:18 PM CDT> <Info> <Security> <BEA-090906> <Changing the default Random Number Generator in RSA CryptoJ from ECDRBG to FIPS186PRNG. To disable this change, specify -Dweblogic.security.allowCryptoJDefaultPRNG=true>
<Jul 9, 2013 7:30:18 PM CDT> <Notice> <WebLogicServer> <BEA-000395> <Following extensions directory contents added to the end of the classpath:
C:\Oracle\Middleware\user_projects\domains\EPMSystem\lib\audit-client.jar;C:\Oracle\Middleware\user_projects\domains\EPMSystem\lib\css.jar;C:\Oracle\Middleware\user_projects\domains\EPMSystem\lib\ctg_custom.jar;C:\Oracle\Middleware\user_projects\domains\EPMSystem\lib\ldapbp.jar;C:\Oracle\Middleware\user_projects\domains\EPMSystem\lib\opencsv-1.8.jar;C:\Oracle\Middleware\user_projects\domains\EPMSystem\lib\registry-api.jar;C:\Oracle\Middleware\user_projects\domains\EPMSystem\lib\wlpool.jar>
<Jul 9, 2013 7:30:18 PM CDT> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Oracle JRockit(R) Version R28.2.5-50-153520-1.6.0_37-20121220-0844-windows-x86_64 from Oracle Corporation>
<Jul 9, 2013 7:30:47 PM CDT> <Info> <Management> <BEA-141107> <Version: WebLogic Server 10.3.6.0 Tue Nov 15 08:52:36 PST 2011 1441050 >
<Jul 9, 2013 7:30:57 PM CDT> <Emergency> <Management> <BEA-141151> <The admin server could not be reached at http://SUBHASUBBU:7001.>
<Jul 9, 2013 7:30:57 PM CDT> <Info> <Configuration Management> <BEA-150018> <This server is being started in managed server independence mode in the absence of the admin server.>
<Jul 9, 2013 7:30:57 PM CDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<Jul 9, 2013 7:30:57 PM CDT> <Info> <WorkManager> <BEA-002900> <Initializing self-tuning thread pool>
<Jul 9, 2013 7:30:58 PM CDT> <Notice> <LoggingService> <BEA-320400> <The log file C:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\EPMServer0\logs\EPMServer0.log will be rotated. Reopen the log file if tailing has stopped. This can happen on some platforms like Windows.>
<Jul 9, 2013 7:30:58 PM CDT> <Notice> <LoggingService> <BEA-320401> <The log file has been rotated to C:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\EPMServer0\logs\EPMServer0.log00002. Log messages will continue to be logged in C:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\EPMServer0\logs\EPMServer0.log.>
<Jul 9, 2013 7:30:58 PM CDT> <Notice> <Log Management> <BEA-170019> <The server log file C:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\EPMServer0\logs\EPMServer0.log is opened. All server side log events will be written to this file.>
OracleFileSSOWalletImpl.getWalletData: enter...
OracleFileSSOWalletImpl.getWalletData: System.getProperty(user.name)=SUBHASUBBU$
OracleFileSSOWalletImpl.getWalletData: locking (shared) dummy sso file..
OracleFileSSOWalletImpl.getWalletData: locking (shared) sso file..
Oracle Wallet: wallet size 8349
OracleWallet: getSecretStore
OracleSecretStore: loading wallet from stream
OracleSSOKeyStoreImpl: engineLoad
OracleKeyStoreSpi: Loading wallet from stream
OracleKeyStoreSpi: Opening safe 0
OracleKeyStoreSpi: Opening safe 0
OracleKeyStoreSpi: found cert bag
OracleKeyStoreSpi: found cert bag
OracleKeyStoreSpi: found cert bag
OracleKeyStoreSpi: found cert bag
OracleKeyStoreSpi: found cert bag
OracleKeyStoreSpi: found cert bag
OracleKeyStoreSpi: found cert bag
OracleKeyStoreSpi: found cert bag
OracleKeyStoreSpi: Opening safe 0
OracleKeyStoreSpi: found secret store bag
OracleKeyStoreSpi: found secret store bag
OracleKeyStoreSpi: found secret store bag
OracleKeyStoreSpi: found secret store bag
OracleKeyStoreSpi: Opening safe 0
OracleKeyStoreSpi: Opening safe 0
Processing TP 0
Storing TP 0 as CN=Entrust.net Secure Server Certification Authority
Processing TP 1
Storing TP 1 as CN=Entrust.net Secure Server Certification Authority 1
Processing TP 2
Storing TP 2 as CN=Entrust.net Certification Authority (2048)
Processing TP 3
Storing TP 3 as CN=GTE CyberTrust Global Root
Processing TP 4
Storing TP 4 as OU=Secure Server Certification Authority
Processing TP 5
Storing TP 5 as OU=Class 1 Public Primary Certification Authority
Processing TP 6
Storing TP 6 as OU=Class 2 Public Primary Certification Authority
Processing TP 7
Storing TP 7 as OU=Class 3 Public Primary Certification Authority
OracleKeyStoreSpi: Storing Secret0
Getting sequence from bag
Getting alias from sequence
Getting secret from sequence
OracleKeyStoreSpi: Storing Secret1
Getting sequence from bag
Getting alias from sequence
Getting secret from sequence
OracleKeyStoreSpi: Storing Secret2
Getting sequence from bag
Getting alias from sequence
Getting secret from sequence
OracleKeyStoreSpi: Storing Secret3
Getting sequence from bag
Getting alias from sequence
Getting secret from sequence
OracleKeyStoreSpi: Keystore Loaded
OracleWallet: getSecretStore
OracleFileSSOWalletImpl.getWalletData: enter...
OracleFileSSOWalletImpl.getWalletData: System.getProperty(user.name)=SUBHASUBBU$
OracleFileSSOWalletImpl.getWalletData: locking (shared) dummy sso file..
OracleFileSSOWalletImpl.getWalletData: locking (shared) sso file..
Oracle Wallet: wallet size 3941
OracleWallet: getSecretStore
OracleSecretStore: loading wallet from stream
OracleSSOKeyStoreImpl: engineLoad
OracleKeyStoreSpi: Loading wallet from stream
OracleKeyStoreSpi: Opening safe 0
OracleKeyStoreSpi: Opening safe 0
OracleKeyStoreSpi: found cert bag
OracleKeyStoreSpi: found cert bag
OracleKeyStoreSpi: found cert bag
OracleKeyStoreSpi: found cert bag
OracleKeyStoreSpi: Opening safe 0
OracleKeyStoreSpi: found secret store bag
OracleKeyStoreSpi: found secret store bag
OracleKeyStoreSpi: found secret store bag
OracleKeyStoreSpi: found secret store bag
OracleKeyStoreSpi: Opening safe 0
OracleKeyStoreSpi: Opening safe 0
Processing TP 0
Storing TP 0 as OU=Class 1 Public Primary Certification Authority
Processing TP 1
Storing TP 1 as CN=GTE CyberTrust Global Root
Processing TP 2
Storing TP 2 as OU=Class 2 Public Primary Certification Authority
Processing TP 3
Storing TP 3 as OU=Class 3 Public Primary Certification Authority
OracleKeyStoreSpi: Storing Secret0
Getting sequence from bag
Getting alias from sequence
Getting secret from sequence
OracleKeyStoreSpi: Storing Secret1
Getting sequence from bag
Getting alias from sequence
Getting secret from sequence
OracleKeyStoreSpi: Storing Secret2
Getting sequence from bag
Getting alias from sequence
Getting secret from sequence
OracleKeyStoreSpi: Storing Secret3
Getting sequence from bag
Getting alias from sequence
Getting secret from sequence
OracleKeyStoreSpi: Keystore Loaded
OracleWallet: getSecretStore
<Jul 9, 2013 7:31:19 PM CDT> <Notice> <Security> <BEA-090082> <Security initializing using security realm myrealm.>
<Jul 9, 2013 7:31:19 PM CDT> <Notice> <Security> <BEA-090083> <Storing boot identity in the file: C:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\EPMServer0\security\boot.properties>
<Jul 9, 2013 7:31:41 PM CDT> <Warning> <JTA> <BEA-110503> <The migrator(the AdminServer for manual JTA migration policy, or the Singleton Master for automatic JTA migration policy) is not available. Will skip JTA TRS failback because isStrictOwnershipCheck is [false]. This may lead to potencial TLOG corruption if TRS of EPMServer0 has been migrated to backup server and the backup server is accessing the TLOG of EPMServer0. More safety can be achieved by setting isStrictOwnershipCheck to [true].>
<Jul 9, 2013 7:31:42 PM CDT> <Notice> <LoggingService> <BEA-320400> <The log file C:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\EPMServer0\logs\access.log will be rotated. Reopen the log file if tailing has stopped. This can happen on some platforms like Windows.>
<Jul 9, 2013 7:31:42 PM CDT> <Notice> <LoggingService> <BEA-320401> <The log file has been rotated to C:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\EPMServer0\logs\access.log00002. Log messages will continue to be logged in C:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\EPMServer0\logs\access.log.>
<Jul 9, 2013 7:32:18 PM CDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STANDBY>
<Jul 9, 2013 7:32:18 PM CDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
Using OraclePKI Provider
javax.net.ssl.TrustManagerFactory supported
javax.net.ssl.KeyManagerFactory supported
Using OracleJSSE103 Provider
<Jul 9, 2013 7:32:21 PM CDT> <Warning> <JDBC> <BEA-001552> <The logging last resource (LLR) data source accountreconciliation_datasource will not function when it is a participant in a global transaction that spans multiple WebLogic Server instances because remote JDBC support is disabled. LLR will function in single-server configurations.>
<Jul 9, 2013 7:32:21 PM CDT> <Warning> <JDBC> <BEA-001552> <The logging last resource (LLR) data source financialclose_datasource will not function when it is a participant in a global transaction that spans multiple WebLogic Server instances because remote JDBC support is disabled. LLR will function in single-server configurations.>
<Jul 9, 2013 7:33:42 PM CDT> <Warning> <Security> <BEA-090668> <Ignored deployment of role "Admin" for resource "type=<url>, application=DMS Application#11.1.1.1.0, contextPath=/dms, uri=/">
<Jul 9, 2013 7:33:47 PM CDT> <Error> <Deployer> <BEA-149205> <Failed to initialize the application 'ACCOUNTRECONCILIATION [Version=11.1.2.0]' due to error weblogic.management.DeploymentException: [J2EE:160149]Error while processing library references. Unresolved application library references, defined in weblogic-application.xml: [Extension-Name: oracle.soa.workflow.wc, exact-match: false]..
weblogic.management.DeploymentException: [J2EE:160149]Error while processing library references. Unresolved application library references, defined in weblogic-application.xml: [Extension-Name: oracle.soa.workflow.wc, exact-match: false].
at weblogic.application.internal.flow.CheckLibraryReferenceFlow.prepare(CheckLibraryReferenceFlow.java:26)
at weblogic.application.internal.BaseDeployment$1.next(BaseDeployment.java:648)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.BaseDeployment.prepare(BaseDeployment.java:191)
at weblogic.application.internal.EarDeployment.prepare(EarDeployment.java:59)
Truncated. see log file for complete stacktrace
>
<Jul 9, 2013 7:34:12 PM CDT> <Warning> <EJB> <BEA-010001> <While deploying EJB 'RuleService_AsyncRequestProcessorMDB', class oracle.j2ee.ws.server.jaxws.AsyncRequestProcessorMDB was loaded from the system classpath. As a result, this class cannot be reloaded while the server is running. To prevent this behavior in the future, make sure the class is not located in the server classpath.>
<Jul 9, 2013 7:34:12 PM CDT> <Warning> <EJB> <BEA-010001> <While deploying EJB 'RuleService_AsyncResponseProcessorMDB', class oracle.j2ee.ws.server.jaxws.AsyncResponseProcessorMDB was loaded from the system classpath. As a result, this class cannot be reloaded while the server is running. To prevent this behavior in the future, make sure the class is not located in the server classpath.>
<Jul 9, 2013 7:34:13 PM CDT> <Warning> <Munger> <BEA-2156203> <A version attribute was not found in element application in the deployment descriptor in C:\Oracle\Middleware\EPMSystem11R1\products\Essbase\aps\AppServer\InstallableApps\Common\aps.ear/META-INF/application.xml. A version attribute is required, but this version of the Weblogic Server will assume that the JEE5 is used. Future versions of the Weblogic Server will reject descriptors that do not specify the JEE version.>
<Jul 9, 2013 7:34:13 PM CDT> <Warning> <Munger> <BEA-2156203> <A version attribute was not found in element application in the deployment descriptor in C:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\EPMServer0\tmp\servers\EPMServer0\tmp\_WL_user\APS_11.1.2.0\mizf54/META-INF/application.xml. A version attribute is required, but this version of the Weblogic Server will assume that the JEE5 is used. Future versions of the Weblogic Server will reject descriptors that do not specify the JEE version.>
<Jul 9, 2013 7:35:15 PM CDT> <Error> <Deployer> <BEA-149205> <Failed to initialize the application 'FINANCIALCLOSE [Version=11.1.2.0]' due to error weblogic.management.DeploymentException: [J2EE:160149]Error while processing library references. Unresolved application library references, defined in weblogic-application.xml: [Extension-Name: oracle.soa.workflow.wc, exact-match: false]..
weblogic.management.DeploymentException: [J2EE:160149]Error while processing library references. Unresolved application library references, defined in weblogic-application.xml: [Extension-Name: oracle.soa.workflow.wc, exact-match: false].
at weblogic.application.internal.flow.CheckLibraryReferenceFlow.prepare(CheckLibraryReferenceFlow.java:26)
at weblogic.application.internal.BaseDeployment$1.next(BaseDeployment.java:648)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.BaseDeployment.prepare(BaseDeployment.java:191)
at weblogic.application.internal.EarDeployment.prepare(EarDeployment.java:59)
Truncated. see log file for complete stacktrace
>
<Jul 9, 2013 7:35:44 PM CDT> <Warning> <J2EE> <BEA-160140> <Unresolved optional package references (in META-INF/MANIFEST.MF): [Extension-Name: com/oracle/adfm, Specification-Version: 1, referenced from: C:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\EPMServer0\tmp\servers\EPMServer0\tmp\_WL_user\FMADFWEB_11.1.2.0\nw1g9o]. Make sure the referenced optional package has been deployed as a library.>
<Jul 9, 2013 7:35:49 PM CDT> <Warning> <EJB> <BEA-010001> <While deploying EJB 'ActionsService_AsyncRequestProcessorMDB', class oracle.j2ee.ws.server.jaxws.AsyncRequestProcessorMDB was loaded from the system classpath. As a result, this class cannot be reloaded while the server is running. To prevent this behavior in the future, make sure the class is not located in the server classpath.>
<Jul 9, 2013 7:35:49 PM CDT> <Warning> <EJB> <BEA-010001> <While deploying EJB 'ActionsService_AsyncResponseProcessorMDB', class oracle.j2ee.ws.server.jaxws.AsyncResponseProcessorMDB was loaded from the system classpath. As a result, this class cannot be reloaded while the server is running. To prevent this behavior in the future, make sure the class is not located in the server classpath.>
<Jul 9, 2013 7:36:57 PM CDT> <Warning> <Munger> <BEA-2156203> <A version attribute was not found in element web-app in the deployment descriptor in C:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\EPMServer0\tmp\servers\EPMServer0\tmp\_WL_user\SHAREDSERVICES_11.1.2.0\dt7o9d\interop.war/WEB-INF/web.xml. A version attribute is required, but this version of the Weblogic Server will assume that the JEE5 is used. Future versions of the Weblogic Server will reject descriptors that do not specify the JEE version.>
<Jul 9, 2013 7:38:12 PM CDT> <Warning> <Munger> <BEA-2156203> <A version attribute was not found in element application in the deployment descriptor in C:\Oracle\Middleware\odi\setup\manual\oracledi-agent\oraclediagent.ear/META-INF/application.xml. A version attribute is required, but this version of the Weblogic Server will assume that the JEE5 is used. Future versions of the Weblogic Server will reject descriptors that do not specify the JEE version.>
<Jul 9, 2013 7:38:12 PM CDT> <Warning> <Munger> <BEA-2156203> <A version attribute was not found in element application in the deployment descriptor in C:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\EPMServer0\tmp\servers\EPMServer0\tmp\_WL_user\oraclediagent\cn250y/META-INF/application.xml. A version attribute is required, but this version of the Weblogic Server will assume that the JEE5 is used. Future versions of the Weblogic Server will reject descriptors that do not specify the JEE version.>
<Jul 9, 2013 7:38:12 PM CDT> <Warning> <J2EE> <BEA-160140> <Unresolved optional package references (in META-INF/MANIFEST.MF): [Extension-Name: oracle.bam.odi.library, Specification-Version: 11.1.1, referenced from: C:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\EPMServer0\tmp\servers\EPMServer0\tmp\_WL_user\oraclediagent\cn250y]. Make sure the referenced optional package has been deployed as a library.>
<Jul 9, 2013 7:38:13 PM CDT> <Emergency> <Deployer> <BEA-149259> <Server 'EPMServer0' in cluster 'EPMServer' is being brought up in administration state due to failed deployments.>
Hyperion Provider Services - Release 11.1.2.3.4408
Copyright (c) 1991, 2013 Oracle and / or its affiliates. All rights reserved.
connection mode : HTTP
essbase.properties: C:\Oracle\Middleware\EPMSystem11R1/common/EssbaseJavaAPI/11.1.2.0/bin/essbase.properties
java System properties -DESS_ES_HOME: C:\Oracle\Middleware\EPMSystem11R1/common/EssbaseJavaAPI/11.1.2.0
Mode: Non Fusion read from Registry
registry.isRegistryDatabaseCreated()true
Registry was initialized sucessfully
Component was found from component type DISC_MAN_PRODUCT
Updating version Disclosure_dbVersion with DISC_MAN_PRODUCT
Warning: Starting ADF Library jar post-deployment on WebLogic Server. Is "provider-lazy-inited" init-param missing from LibraryFilter? Ignore this warning if the ADFJspResourceProvider is not being used.
Started: ADF Library non-ADFJspResourceProvider post-deployment
Finished: ADF Library non-ADFJspResourceProvider post-deployment (millis): 46
Essbase® Administration Services - Version 11.1.2.3.000.4415
Copyright © 1991, 2013 Oracle and/or its affiliates. All rights reserved. Oracle and Java are registered trademarks of Oracle and/or its affiliates. Other names may be trademarks of their respective owners. No portion hereof may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying, recording, or information storage and retrieval systems, for any purpose other than the recipient's personal use, without the express written permission of Oracle.
US Patent Number 5,359,724
US Patent Number 6,317,750
Current time stamp: Tue Jul 09 19:38:54 CDT 2013
Server started successfully
Waiting for client requests
HRContextListener::contextInitialized
Warning: Starting ADF Library jar post-deployment on WebLogic Server. Is "provider-lazy-inited" init-param missing from LibraryFilter? Ignore this warning if the ADFJspResourceProvider is not being used.
Started: ADF Library non-ADFJspResourceProvider post-deployment
Finished: ADF Library non-ADFJspResourceProvider post-deployment (millis): 203
- WEBLOGIC
null
- The AMHM configuration file path is..nullconf
- getting attributes for bsp.jsr: [Migration, Ant-Version, Manifest-Version, Created-By, Version]
- going to get value for Migration attribute
- Encryption Type : AES
- Invocation of generateSecurityFile Successful
- userName :
- ServiceID :
- applicationName :
- Configuration File (config.xml) does not exist under C:\Oracle\Middleware\user_projects\epmsystem1\Planning\planning1\config.xml Process aborted.
- Migration Failed
Utf8Filter: forceRequestCharacterEncoding set to true (init-param=true)
Utf8Filter: repairRequestParameters set to false (init-param=false)
Utf8Filter: rebuildPathInfo set to false (init-param=false)
Utf8Filter: revertRequestURI set to true (init-param=true)
Utf8Filter: settings are true/false/false/true
Initializing CORBA ORB.
CORBA ORB initialization complete.
Loading configuration from registry
WSBaseServlet.setDefaultGSMContext(): Servlet GSM context. host=192.168.204.1:6800
Log configuration: file:/C:/Oracle/Middleware/user_projects/epmsystem1/ReportingAnalysis/RAFrameworkWebapp/WEB-INF/logging.properties
<Jul 9, 2013 7:39:39 PM CDT> <Notice> <Cluster> <BEA-000197> <Listening for announcements from cluster using unicast cluster messaging>
<Jul 9, 2013 7:39:39 PM CDT> <Notice> <Cluster> <BEA-000133> <Waiting to synchronize with other running members of EPMServer.>
<Jul 9, 2013 7:39:44 PM CDT> <Warning> <Log Management> <BEA-170011> <The LogBroadcaster on this server failed to broadcast log messages to the admin server. The Admin server may not be running. Message broadcasts to the admin server will be disabled.>
<Jul 9, 2013 7:40:09 PM CDT> <Notice> <Server> <BEA-002613> <Channel "Default[7]" is now listening on fe80:0:0:0:0:5efe:c0a8:ed01:9000 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
<Jul 9, 2013 7:40:09 PM CDT> <Notice> <Server> <BEA-002613> <Channel "Default[9]" is now listening on fe80:0:0:0:0:100:7f:fffe:9000 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
<Jul 9, 2013 7:40:09 PM CDT> <Notice> <Server> <BEA-002613> <Channel "Default[13]" is now listening on 0:0:0:0:0:0:0:1:9000 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
<Jul 9, 2013 7:40:09 PM CDT> <Notice> <Server> <BEA-002613> <Channel "Default[3]" is now listening on fe80:0:0:0:0:5efe:c0a8:cc01:9000 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
<Jul 9, 2013 7:40:09 PM CDT> <Notice> <Server> <BEA-002613> <Channel "Default[5]" is now listening on fe80:0:0:0:0:5efe:c0a8:7:9000 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
<Jul 9, 2013 7:40:09 PM CDT> <Notice> <Server> <BEA-002613> <Channel "Default[12]" is now listening on 127.0.0.1:9000 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
<Jul 9, 2013 7:40:09 PM CDT> <Notice> <Server> <BEA-002613> <Channel "Default[8]" is now listening on fe80:0:0:0:3415:3499:e650:c29e:9000 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
<Jul 9, 2013 7:40:09 PM CDT> <Notice> <Server> <BEA-002613> <Channel "Default[10]" is now listening on fe80:0:0:0:2d02:d309:55d5:a150:9000 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
<Jul 9, 2013 7:40:09 PM CDT> <Notice> <Server> <BEA-002613> <Channel "Default[11]" is now listening on fe80:0:0:0:5894:d88c:c022:f32b:9000 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
<Jul 9, 2013 7:40:09 PM CDT> <Notice> <Server> <BEA-002613> <Channel "Default[1]" is now listening on 192.168.204.1:9000 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
<Jul 9, 2013 7:40:09 PM CDT> <Notice> <Server> <BEA-002613> <Channel "Default[2]" is now listening on 192.168.0.7:9000 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
<Jul 9, 2013 7:40:09 PM CDT> <Notice> <Server> <BEA-002613> <Channel "Default[6]" is now listening on fe80:0:0:0:c885:cffb:be7a:3e0b:9000 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
<Jul 9, 2013 7:40:09 PM CDT> <Notice> <Server> <BEA-002613> <Channel "Default[4]" is now listening on fe80:0:0:0:1d4d:5292:d06b:f62b:9000 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
<Jul 9, 2013 7:40:09 PM CDT> <Notice> <Server> <BEA-002613> <Channel "Default" is now listening on 192.168.237.1:9000 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
<Jul 9, 2013 7:40:09 PM CDT> <Notice> <WebLogicServer> <BEA-000358> <Started WebLogic Independent Managed Server "EPMServer0" for domain "EPMSystem" running in Production Mode>
<Jul 9, 2013 7:40:09 PM CDT> <Warning> <Server> <BEA-002611> <Hostname "SUBHASUBBU", maps to multiple IP addresses: 192.168.204.1, 192.168.237.1, 192.168.0.7, fe80:0:0:0:c885:cffb:be7a:3e0b%18, fe80:0:0:0:1d4d:5292:d06b:f62b%20, fe80:0:0:0:3415:3499:e650:c29e%15>
<Jul 9, 2013 7:40:09 PM CDT> <Warning> <JMX> <BEA-149510> <Unable to establish JMX Connectivity with the Adminstration Server AdminServer at <JMXServiceURL:null>.>
<Jul 9, 2013 7:40:11 PM CDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to ADMIN>
<Jul 9, 2013 7:40:11 PM CDT> <Notice> <WebLogicServer> <BEA-000360> <Server started in ADMIN mode>
<Jul 9, 2013 8:11:16 PM CDT> <Error> <JDBC> <BEA-001112> <Test "SELECT 1 FROM HSS_COMPONENT_TYPES WHERE 1 = 0" set up for pool "EPMSystemRegistry" failed with exception: "java.sql.SQLNonTransientConnectionException: [FMWGEN][SQLServer JDBC Driver]socket write error: Connection reset by peer.".>
<Jul 9, 2013 8:11:16 PM CDT> <Error> <JDBC> <BEA-001112> <Test "SELECT 1 FROM V8_VERSION WHERE 1 = 0" set up for pool "raframework_datasource" failed with exception: "java.sql.SQLNonTransientConnectionException: [FMWGEN][SQLServer JDBC Driver]socket write error: Connection reset by peer.".>
<Jul 9, 2013 8:11:54 PM CDT> <Warning> <Socket> <BEA-000449> <Closing socket as no data read from it on fe80:0:0:0:c885:cffb:be7a:3e0b:54,190 during the configured idle timeout of 5 secs>
<Jul 9, 2013 8:12:04 PM CDT> <Warning> <Socket> <BEA-000449> <Closing socket as no data read from it on fe80:0:0:0:c885:cffb:be7a:3e0b:54,198 during the configured idle timeout of 5 secs>
<Jul 9, 2013 8:12:19 PM CDT> <Warning> <Socket> <BEA-000449> <Closing socket as no data read from it on 0:0:0:0:0:0:0:1:54,216 during the configured idle timeout of 5 secs>
<Jul 9, 2013 8:12:41 PM CDT> <Error> <JDBC> <BEA-001112> <Test "SELECT 1 FROM HSS_COMPONENT_TYPES WHERE 1 = 0" set up for pool "EPMSystemRegistry" failed with exception: "java.sql.SQLNonTransientConnectionException: [FMWGEN][SQLServer JDBC Driver]socket write error: Connection reset by peer.".>
<Jul 9, 2013 8:12:41 PM CDT> <Error> <JDBC> <BEA-001112> <Test "SELECT 1 FROM ARM_ATTRIBUTES WHERE 1 = 0" set up for pool "accountreconciliation_datasource" failed with exception: "java.sql.SQLNonTransientConnectionException: [FMWGEN][SQLServer JDBC Driver]socket write error: Connection reset by peer.".>
<Jul 9, 2013 8:12:41 PM CDT> <Error> <JDBC> <BEA-001112> <Test "SELECT 1 FROM AIF_LOOKUP_MAPPINGS WHERE 1 = 0" set up for pool "aif_datasource" failed with exception: "java.sql.SQLNonTransientConnectionException: [FMWGEN][SQLServer JDBC Driver]socket write error: Connection reset by peer.".>
<Jul 9, 2013 8:12:41 PM CDT> <Error> <JDBC> <BEA-001112> <Test "SELECT 1 FROM CALCMGRCONFIG WHERE 1 = 0" set up for pool "calc_datasource" failed with exception: "java.sql.SQLNonTransientConnectionException: [FMWGEN][SQLServer JDBC Driver]socket write error: Connection reset by peer.".>
<Jul 9, 2013 8:12:41 PM CDT> <Error> <JDBC> <BEA-001112> <Test "SELECT 1 FROM DISCMAN_COUNTER WHERE 1 = 0" set up for pool "discman_datasource" failed with exception: "java.sql.SQLNonTransientConnectionException: [FMWGEN][SQLServer JDBC Driver]socket write error: Connection reset by peer.".>
<Jul 9, 2013 8:12:46 PM CDT> <Error> <JDBC> <BEA-001112> <Test "SELECT 1 FROM SERVERLOGID WHERE 1 = 0" set up for pool "eas_datasource" failed with exception: "java.sql.SQLNonTransientConnectionException: [FMWGEN][SQLServer JDBC Driver]socket write error: Connection reset by peer.".>
<Jul 9, 2013 8:12:46 PM CDT> <Error> <JDBC> <BEA-001112> <Test "SELECT 1 FROM FCC_USER_ATTRIBUTES WHERE 1 = 0" set up for pool "financialclose_datasource" failed with exception: "java.sql.SQLNonTransientConnectionException: [FMWGEN][SQLServer JDBC Driver]socket write error: Connection reset by peer.".>
<Jul 9, 2013 8:12:46 PM CDT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from SNP_LOC_REP" set up for pool "odiMasterRepository" failed with exception: "java.sql.SQLNonTransientConnectionException: [FMWGEN][SQLServer JDBC Driver]socket write error: Connection reset by peer.".>
<Jul 9, 2013 8:12:46 PM CDT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from SNP_LOC_REP" set up for pool "odiMasterRepository" failed with exception: "java.sql.SQLException: [FMWGEN][SQLServer JDBC Driver]Object has been closed.".>
<Jul 9, 2013 8:12:46 PM CDT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from SNP_LOC_REPW" set up for pool "odiWorkRepository" failed with exception: "java.sql.SQLNonTransientConnectionException: [FMWGEN][SQLServer JDBC Driver]socket write error: Connection reset by peer.".>
<Jul 9, 2013 8:12:46 PM CDT> <Error> <JDBC> <BEA-001112> <Test "SELECT 1 FROM HSPSYS_CLUSTER WHERE 1 = 0" set up for pool "planning_datasource" failed with exception: "java.sql.SQLNonTransientConnectionException: [FMWGEN][SQLServer JDBC Driver]socket write error: Connection reset by peer.".>
<Jul 9, 2013 8:12:46 PM CDT> <Error> <JDBC> <BEA-001112> <Test "SELECT 1 FROM HPM_APPLICATION WHERE 1 = 0" set up for pool "profitability_datasource" failed with exception: "java.sql.SQLNonTransientConnectionException: [FMWGEN][SQLServer JDBC Driver]socket write error: Connection reset by peer.".>
<Jul 9, 2013 8:18:49 PM CDT> <Warning> <Socket> <BEA-000449> <Closing socket as no data read from it on fe80:0:0:0:c885:cffb:be7a:3e0b:54,579 during the configured idle timeout of 5 secs>
<Jul 9, 2013 8:22:29 PM CDT> <Warning> <Socket> <BEA-000449> <Closing socket as no data read from it on fe80:0:0:0:c885:cffb:be7a:3e0b:54,820 during the configured idle timeout of 5 secs>
<Jul 9, 2013 8:29:44 PM CDT> <Warning> <Socket> <BEA-000449> <Closing socket as no data read from it on fe80:0:0:0:c885:cffb:be7a:3e0b:55,178 during the configured idle timeout of 5 secs>

First of all "I installed 11.1.2.3 in windows 7 ultimate OS", it is not a supported OS so if you want assistance problem solving you should stick with a supported OS.
It also looks like you have installed a whole range of products some requiring additional configuration and the requirement of SOA.
I recommend starting with a support OS and only install products that are required.
Cheers
John
http://john-goodwin.blogspot.com/

While processing a message : Error HTTP 404: not found

Hi gurus,
I'm stuck on a File-XI-IDoc scenario.
Here is the message i get in the Message Tool Display:
Erreur lors de la transmission du message au point d'accès http://rchase12:53000/sap/xi/engine?type=entry via la connexion File_http://sap.com/xi/XI/System. Motif : com.sap.aii.af.ra.ms.api.RecoverableException: Received HTTP response code 404 : Not Found
It's in French but it it's like my url is not good. I read about the port that must be 80xx in place of 53000 is it true?? I can't find any information about it, in another place than some forum topics.
Could anyone help me?
Thanks in advance.
Thomas

Hi,
Description: The server has not found anything matching the Request-URI. No indication is given of whether the condition is temporary or permanent. The 410 (Gone) status code SHOULD be used if the server knows, through some internally configurable mechanism, that an old resource is permanently unavailable and has no forwarding address. This status code is commonly used when the server does not wish to reveal exactly why the request has been refused, or when no other response is applicable.
Possible Tips:- for HTTP_RESP_STATUS_CODE_NOT_OK 404
u2022 404 is an HTTP response code that indicates that the resource in question couldn't be found. Usually this is due to an incorrect URL, so it is better to cross check all URLs. Check pipeline URL in the SLD in the business system of the Integration Server For this go to SLD->Business System-><yourIntegrtaion Server>->Pipeline URL: It should be like this http://<host>:<port>/sap/xi/engine?type=entry Where host is the host name of the Integration Server and port is the HTTP(8xxx) port. To verify this in Integration Server you can do like this. Go to SXMB_ADM->Integration Engine Configuration->Choose Edit from Menu -> Change Global Configuration Data to switch to change mode. Then select System Landscape - Load Configuration. (This is not required always)
u2022 Check that the port really is the ICM HTTP Port and not the J2EE port i.e SMICM then menu GOTO --> SERVICES and check the port number for HTTP. It should be HTTP port
u2022 If the error is Page cannot be displayed, cannot find server in https configurations Check and correct the SSL configuration for the ABAP and the J2EE side of the system
u2022 If the error is because of integration server when using Proxy communications then check these. i.e SXMB_ADM->Integration Engine Configuration->Corresponding Integration Server enrty should be dest://<Http Integration server-Destination> Where < Http Integration server -Destination > is the RFC destination (SM59) of type HTTP connection (type H) to the Integration Server. In this case, host name, port, and path prefix are saved in the RFC destination.
Regards,
Shabari

Alert Configuration / Alert Inbox - "404   Not Found" in PI 7.0

Hi ,
We are trying configure Alert Framework in PI 7.0.
When we are opening the Alert Configuration page through the link
http://<Hostname>:5<Sys.No>00/rwb/index.jsp -> Alert Configuration we are getting error " 404   Not Found"
But when we changed the exchangeProfile parameter com.sap.aii.rwb.server.centralmonitoring.httpport from 5<Sys.no>00 to 8<sys.no>0 we got the page displayed there.
But when we click that page it asks for authentication again !!!
And where we need to fix this redirection problem from 5<sys.no>00 to 8<sys.no>0 ..
the parameter -> icm/HTTP/j2ee_0
is holding this value
PREFIX=/,HOST=localhost,CONN=0-500,PORT=5$$00
Please suggest.
Thanks &Regards
Mrutyunjay

Could you please post the details..
We are also facing the same issue.
Thanks in Advance.
Regards
Sujan

Paypal link/code works in IE but getting Error 404: NOT FOUND! in FireFox

Hi, I just got off the phone with paypal about this problem I'm having. Here is my
site wwwdotbankruptcyrecoveryprogramdotcom. If you open it in IE and click
on the "Click here to order now" graphic button it works and will take you to
paypal. If you open the site in FF and do the same you will get Error 404: NOT FOUND!.
Paypal was not much help they just said that DW is doing something to the code
when displayed in FF.
Any help with this would be greatly appreciated...thank you...

Try this....find this code, and change this:
<div style="text-align: center;"><span style="color: black;">
<span style="color: black;"><span style="color: black;">
<a href="<form action="https://www.paypal.com/cgi-bin/webscr" method="post">">
<form action="https://www.paypal.com/cgi-bin/webscr" method="post">
<input type="hidden" name="cmd" value="_s-xclick">
<input type="hidden" name="hosted_button_id" value="74RRP9AQ95BVS">
<input type="image" src="http://bankruptcyrecoveryprogram.com/order-button.jpg"
border="0" name="submit" alt="PayPal - The safer, easier way to pay online!">
<img alt="" border="0" src="https://www.paypal.com/en_US/i/scr/pixel.gif" width="1" height="1">
</form>
</a><br />
</span></span></span>
To this:
<div style="text-align: center; color: black;">
<form action="https://www.paypal.com/cgi-bin/webscr" method="post">
<input type="hidden" name="cmd" value="_s-xclick">
<input type="hidden" name="hosted_button_id" value="74RRP9AQ95BVS">
<input type="image" src="http://bankruptcyrecoveryprogram.com/order-button.jpg" border="0" name="submit"
alt="PayPal - The safer, easier way to pay online!">
<img alt="" border="0" src="https://www.paypal.com/en_US/i/scr/pixel.gif" width="1" height="1">
</form>
</div>
<br />
See that that does for you.
Gary

With firefox I encountered this: 404 Not - Found or 408 Not - foun, is it something to do with firefox? some website just couldn't go or open.

I didn't have a fire fox before and uses the IE only which work well for over 2 years but towards the end of 2010 encountered a new problem on my email on yahoo which i have never before known the problem happen like this: when i open my email on yahoo, the website just flash and stop and it said the Internet Explorer could not display the web and need to stop and i find ti difficult even to sign out the email but when i could sign out the web came back saying the web site has been recovered, but then it will just keep on repeating the same process. I doubt this could be any virus but all the other web site are functioning perfectly (I am using a Kaspersky complete Protection) I related my problem to a friend and also recommended me to download a firefox to sovle the problem.
after downloaded the fire fox my yahoo email just functioning perfectly to date, no more of that flashing back problem again.
The new problem is i could not log in to some web site that i previously could have log in easily. like I said earlier, "404 Not - Found" or "408 Not - Found'
"404 Not - Found" appeared when I click on the "Desktop Dating" website and the other a China internet movie website.

If AVG is blocking it then you need to contact AVG and ask them why that is happening.
Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).<br />
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]

Alert Configuration : 404 Not Found The requested resource does not exist

Hi all ,
We are facing problem in Alert configuration and
Alert Inbox . We are on SP14 service patch
We are getting error as " 404 Not Found The requested
resource does not exist "
We have activated all the necessary services in
Tcode : SICF as mentioned in the config. guide
We have executed the program :
SXMB_ACTIVATE_ICF_SERVICES
We have referred the SAP note : 750287 and tried to
set the httpport as per the note but again we are
getting error as "The page cannot be displayed" .
We have checked the parameters in Exchange profile
for httpport as well as for host also .
Can someone please guide us on this .
Thanks
Shikha

Hi all ,
Thanks for the replies .
Shravan ,
I pinged my XI and is working . we have already added
the IP Address and the host name , but the same error
is coming .
Anirban,
Checked all the necessary services again as suggested
by you .
Andreas ,
> is to set the abap profile parameter
LOCALHOSTFULL to the fqhn.
Can you please let me know where to set the abap
profile parameter "LOCALHOSTFULL" as suggested by you .
Thanks
Shikha

Bounded Task Flow as Dialog - 404 Not Found

I am attempting to call a bounded task flow as an inline dialog from a view activity in my unbounded task flow. When the bounded task flow is invoked, I am presented with a dialog which contains a "404 Not Found" error. I thought that I had this right based on what I read in the developers guide:
1. In my unbounded task flow, create a task-flow-call activity
a. Set the "Run As Dialog" behavior to "true"
b. Set the "Display type" to "inline-popup"
2. Add a named control flow which associates a view activity to the task-flow-call activity.
3. In the related view activity page, add a command control with the "action" set to the name of the control flow, and "useWindow" set to "true".
4. In my bounded task flow, add a view activity which points to the JSF document (jsfx) that I want to display in the dialog.
5. I add a task flow return activity to my bounded task flow, and a control flow that associates the view activity with the return activity.
6. In my page fragment, I add a cancel button which invokes the control flow from the view activity to the return activity.
Run
When I click on the command button which invokes the bounded task flow as an inline pop-up, and I see an inline pop-up which contains the 404 page not found error.
I must be missing something fundamental here. I've scanned all the doc and the forum, but I don't see it. Will someone please point it out to me?
Cheers
Edited by: gratuitious on Mar 24, 2011 5:03 PM
Edited by: gratuitious on Mar 24, 2011 5:07 PM

I appreciate the response, but I am actually building an ADF application that I am running in the JDeveloper embedded WebLogic Server. These instructions are for deploying a task form composite app to a standalone WLS.
I'm just trying to run a bounded task flow in a dialog as described here: http://download.oracle.com/docs/cd/E14571_01/web.1111/b31974/taskflows_dialogs.htm#BABBAFJB
However, I get the 404 Not Found error when I invoke the bounded task flow from a command control. The dialog appears, but the default page of my bounded task flow is not in it.
Seems like this has to be a simple problem to fix. Anyone?
Thanks

Alert configuration or Alert Inbox-----404 Not Found

Hi,
In RWB, When I click Alert configuration or Alert Inbox
the following message is displayed
404 Not Found
SAP J2EE Engine/6.40
The requested resource does not exist.
Details: Go to main page of this application!
Is this due to installation problem ?
How to fix this ?
Thanks,
ss

Hi,
check the following entries in your Exchange Profile:
com.sap.aii.rwb.server.centralmonitoring.r3.ashost --- Must be full qualified
com.sap.aii.rwb.server.centralmonitoring.httpport --- 80<SysNo> or see SMICM -> Goto -> Services: http-Port
Normaly you only need to refresh you RWB with the following link:
http://<System>:<Port>/rwb/rtc?op=init
if this doesn't work try to restart the complete ABAP Stack.
Good luck!
Chris

Error message 404 NOT FOUND occurs

Hi Experts
In cProjects, in accounting tab page when I click on to the open field links( which links to R/3), a new web page is opening with following message :-
"404   Not Found
    The requested resource does not exist."
"Details:   Go to main page of this application!"
so please kindly help me resolve this matter
thanks in advance
Anand
[email protected]

Hi Reema;
thankx for a prompt response.
We have maintained the RFC connection and that is how the a/cing tab page is visible to us.
After that when individual field like "Display order" Tcode "KO03" in SAP R/3 and many others are visible.
But when we click on these links then the above mentioned error is coming.
Please support us to resolve the error asap.
Regards'
anand

Satellite A500 Nvidia Display Driver 404 - Not Found

Similar Messages

Maybe you are looking for