Satellite A500 overheating after upgrading to windows 64bit

Hey,
I just upgraded to 64bit and my GPU temperature has been really high, around 60 degrees Celsius. It goes up to 107 when I run a game. When I had 32bit running I never had this problem, I could play any game without the laptop overheating. I thought at first it was a problem with drivers, or that im missing somthing.
I have updated bios, every single other driver that I could find for my laptop and repeatable reinstalled video card drivers with no change.
Now I have been trying to work out how to change the fan settings, I have noticed the fan starts running fast enough to hear at 55ish degrees and I want to decrease that setting aswells increase the fan speed.
I have tried Speedfan, and like 5 other programs where none of them worked.
I'm also afraid if I just reinstall 32bit that I will have the same problem since there might be some kind of driver or utility I have lost in the format.
Is there a way I can fix this problem? Is there a Toshiba utility or something I might have missed?
Is the A500 not compatible with 64bit? Can the fan settings be changed?
Thanks in advance

Have you installed the Toshiba Value Added Package? It is an important package because it provides core hardware interfaces.
If it's still overheating, there may be dust buildup in the heatsink. You can remove the dust by using a Can of Compressed Air.
If it's still overheating after removing the dust, updating the BIOS, and testing it with the factory Windows installation, then it's probably a hardware problem. An authorized service provider can investigate the problem. There's an ASP list on the Toshiba website.

Similar Messages

Satellite p745-s4217 overheating after upgrade to windows 8.1

I have Toshiba Sattelite P745-s4217 intel corei5 2nd Gen
I upgraded from windows 7 to 8.1, since then I have had lots and lots of problems, in this topic I am disccusing one of them, it overheats anytime I watch netflix or extract a zip file and it just turns off, it is really anoyying and it happens fequently,
the only solution I found so far is , changing the CPU speed in the BIO to ALWAYS LOW, but if I do that, I can not watch netflix movies correctly, the sound and video would be out of sync .
so the problem is it overheats and turns off whenver it uses the cpu, I tried to clean the Fans, but it was not really dirty, and I dont have this problem in Ubuntu.

There's no need to be rude, tonyinamerica. I was definitely speaking English. Appendix A is a section in the document I linked. That document explains the upgrade process. Did you read it?
- Peter

Satellite L300D BSOD after upgrading to Windows 7

I've had this laptop (Satellite L300D) for a bit more than a year with windows vista (32-bit) running and there have been no problems. However, i just recently upgraded to Windows 7 (x64) and have gotten problems since the first reboot.
On the first reboot after windows 7 installation, the computer simply turned off after the "Starting Windows" screen. Powering it up again took me to system repair where it performed a system restore and i was able to boot successfully again. I thought the problem had something to do with the automatic updates so i disabled them and tried to reboot to see if the problem was fixed. This time, after the "Starting Windows" screen i got a Fatal System Error BSOD. After multiple reboot attempts and multiple system repair attempts (which usually said it failed) it successfully booted up again.
This problem has been going for about 3 weeks now and it's quite irritating. The results from the system repair claims that a "Boot Critical File is Corrupt" but it does boot up eventually after multiple attempts to boot. It also has a habit of turning itself off randomly while running (happens about once or twice a day). So as of now, everytime i try to start my comp it either turns off after the startup screen or gives the BSOD and restarts and the only way to get it working seems to be to keep attempting to boot and hope for a successful boot up (this eventually happens after a few failed attempts).
I did a bit of research on this and came to [this|http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/modelContent.jsp?modelFilter=L300D-ST3501&rpn=PSLC8U&category=&selCategory=3&moid=222 1251&os=&ct=DL&selFamily=1073768663] page. I think that's exactly what my problem is (need to update BIOS) but as i understand the windows install for that is only for xp/2000/vista and i'm unable to use the second option of booting from disc as i get the BSOD before it gets to that point. Should i try the windows install option even though i'm running windows 7 or is there some other way to update the BIOS? Or am i completely off and the problem is with something else?
I wasn't sure what information i should add to this post so if any further information is required please let me know.
Thanks in advance
Edit: Oops, just realised the page i linked doesn't link to exactly what i had opened. I'm talking about the "Critical BIOS updates for 64-bit Windows 7" under "Support Bulletin"
Message was edited by: Jacob27

Hi
First of all it would be interesting to know which BSOD code you get exactly. Can you post this useful information? Normally on the Microsoft Knowledge Base you can find additional informations about the most BSOD codes and so you can start to fix this issue.
BSOD are often related to drivers or RAM/HDD. Latter you can check with special diagnostic tools, Memtest86 for RAM and Drive Fitness Test for HDD. Both tools are freeware and you can find it by using Google. You can download an iso image of them to create a bootable media where you can start the test.
Regarding your BIOS update: I dont know which L300D you have exactly but according the Toshiba website it shows a BIOS update also for Windows 7 64bit. You can try to install it.

Satellite A500 - Can't upgrade to Windows 7

I recently got my copy of Windows 7 ultimate 64 bit. when I actually bought my laptop it was shipped with Windows Vista home premium 64 bit, all I wanted is to upgrade to Windows 7 which I bought.
So I followed the instructions with the Windows 7 Upgrade Assistant Tool but I get this annoying unfix-able message
This model does not support windows 7.. and it quits when I click OK.. So I'm unable to upgrade because I'm afraid of damaging anything. Slthough its an A500-PSAM3E-014011G3. It can totally support Windows 7 so I don't even have a clue where to start to fix that. The BIOS version is even 1.21
I can't find a solution for this HELP PLEASE

Hello Two Lags yes this is the only error i get .. i am using a windows 7 64 bit Ultimate version, the Toshiba upgrade assistant shows this message after the setting boot priority step : This model does not support windows 7 ..i went over all the steps as toshiba said: I inserted the Win7 DVD and i closed setup , launched the Toshiba Upgrade assistant and after the above mentioned step it stops ... i dont get even to the part where i see the drivers to be updated it closes, if it can help u to solve this i asked someone and they said something about Microsoft HCL - i dont know wat this is - and related to the graphics card , here are my specifications (totally supported by windows 7):
Vista® Home Premium 64-bit Edition
Intel® Centrino® 2 : 2.0 GHz
500 GB HDD
4 GB RAM
ATI Mobility Radeon? HD 4650

W8-Display too bright on lowest level after upgrade to windows 8 (64bit)

Display is too bright on lowest level after upgrade to windows 8 (64bit)
Hello,
does anyone know how to get the old drivers for w7 to work?
or is there another solution?
My installed driver:
Mobile Intel series 4 express chipset family MS corp. -WDDM 1.1
8.15.10.2702
even on cloudy day it hurts my eyes... (my temp solution is dimScreen app- black filter on top of all windows)
Fn+Home/End
funny thing is that the scale which shows on top left corner has like 11 steps but only top 8 works
also the old bottom page brightness scale (15 steps) disappeared.
background info:
X301-2776 so IMO it is GM45
i had w7pro i i have over installed it with w8pro both 64
thanks ahead for any ideas

success
this makes the trick - old drivers for win vista 64bit
http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/7xd649ww.exe
and for 32-bit
http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/7xd549ww.exe

Linksys Easy Link Advisor for WRT310N Wireless Router after upgrading to Windows 7 (64bit)

I can't reinstall Linksys Easy Link Advisor for WRT310N Wireless Router after upgrading to Windows 7 (64bit). When I went to Linksys site for solution for new drivers, it asked me for Hardware Version Number. This model doesn't show one. Any thoughts?
Thanks!

Sabertooth is right. If you are able to go online from your Router then you don't need to install LELA software on your Computer.

WPA security Types are missing after upgrading to Windows 8.1

After upgrading from Windows 8 Pro 64bit to Windows 8.1 Pro 64bit on my Sony Vaio Duoe 13, I could not find WPA security type while configuring Wireless network manually. (only WPA2 and 802.1X are available).
I have done a lot of troubleshootings like
1-Reinstall Wirless original driver
2-Updating the wireless driver to the latest
3-Uninstall and reinstall windows 8 then upgrading again to windows 8.1
But the same.
Is there any way to add WPA to the security type?

Yes! It works!
To recap : My laptop has an Atheros AR9002WB-1NG adapter, windows 8.1. Even when it had windows 8, it was unable to connect, but unlike now, I didn't look closely enough about the type of network. Originally I thought it was
this problem. But they confirmed that others with windows 8 had no issues with this. Then , when I tried configuring the network manually, I could not find the WPA-enterprise option at all, only the
WPA2-enterprise.
So here I was, and Greg Seth's answer gave me an idea.
In the following instructions, some commands are obvious, so I won't explain unless necessary. So here's what you do :
0) Go to command line, preferably Administrator (not tried without).
1) C:\Windows\System32> cd \Users\<User>\Documents
2) C:\Users\<User>\Documents> netsh
3) netsh> wlan
4) netsh wlan> show profiles
5) delete profile name=<yournetwork>
Enclose the name of network within quotes, this is to ensure that you can cleanly set up the right profile. Don't close the netsh, we'll need it some more. If you do, just reach there the same way as before.
6) Right click the connection icon in lower right corner > open Network and Sharing Center > Set up a new connection or network > Manually connect to a wireless network
7) Try to create a profile, and try to get as many details to correspond with your requirement. The rest we'll edit in command line, so let's make it as easy as possible.
8) Do the same at the next screen. Edit Network settings > change all the parameters that you can, to match the requirement. My university tech support has a detailed document listing the options to choose, usually for windows 7, or even windows 8. get
as many of them as possible.
9) Finish. Move back to your netsh terminal
10) netsh wlan> show profile <profilename>
without quotes this time. This should show your previous attempt at creating a profile in the GUI dialog boxes. In my case, it had WPA2 and AES. It has to become WPA and TKIP. I also set my authMode to userOnly, since I hadn't done it right in the dialog box
before.
11) netsh wlan> set profileparameter
displays a humongous list of parameters with detailed options, just carefully examine the syntax. It's all here.
12) netsh wlan> set profileparameter name=<profilename> authentication=wpa encryption=tkip authMode=userOnly
13) netsh wlan> set profileparameter
Don't exit this yet.
14) Now click the connection icon, and connect to the network. It will ask you the username and password in a different style, that was my clue something was different this time.
15) It should connect. In my case atleast, it did. Verify by browsing.
16) netsh wlan> export profile name=<profile name>
In order that you're not put through this ordeal again, export the profile safely to a file. Again, the profile name in quotes.
17) Wonder why microsoft makes things difficult for us!

Cannot print a PDF file after upgrading to Windows 8.1

Cannot print a PDF file after upgrading to Windows 8.1
I can print anything else from either the Desktop or Start but not a PDF. No error message but just does not print.
Update: down loaded Adobe Reader which runs on the desktop so when I read a PDF file it now runs on the desktop and I can print it.

Cannot print a PDF file after upgrading to Windows 8.1
I can print anything else from either the Desktop or Start but not a PDF. No error message but just does not print.
Update: down loaded Adobe Reader which runs on the desktop so when I read a PDF file it now runs on the desktop and I can print it.

After upgrading to windows 8, spectre 14 usb3 slow

are there any usb3 fast drivers for spectre 14 after upgrading to windows 8, the drivers of windows 7 there are not compatible with windows 8

Hello rumbacha. I understand you're trying to locate some drivers for your SPECTRE for Windows 8.
There are quite a few versions of the SPECTRE so I will need your product number to identify exactly which model you have. This document can show you where the product number is located.
Once I have this I will attempt to locate the drivers for you.
Have an excellent day!
Please click the white star under my name to give me Kudos as a way to say "Thanks!"
Click the "Accept as Solution" button if I resolve your issue.

After upgrading to Windows 8.1 firefox longer works. I got it to load but screen is either blank or doesn't go to target address

after upgrading to Windows 8.1 from 8 nothing works correctly. Firefox 1st received 'unable to load XPcom' After resetting and uninstalling several times Firefox now loads to either a support screen or blank screen. It accepts address input but doesn't execute to target. So far I have been unable to roll back upgrade.
Although IE11 works, it doesn't work correctly.

It is possible that your security software (firewall, anti-virus) blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.org/kb/Server+not+found
*https://support.mozilla.org/kb/Firewalls
*https://support.mozilla.org/kb/fix-problems-connecting-websites-after-updating
If you keep having problems then do a clean reinstall and delete the Firefox program folder before (re)installing a fresh copy of the current Firefox release.
Download a fresh Firefox copy and save the file to the desktop.
*Firefox 24: http://www.mozilla.org/en-US/firefox/all.html
Uninstall your current Firefox version, if possible, to cleanup the Windows registry and settings in security software.
*Do NOT remove personal data when you uninstall your current Firefox version, because all profile folders will be removed and you lose personal data like bookmarks and passwords from profiles of other Firefox versions.
Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
*(32 bit Windows) "C:\Program Files\Mozilla Firefox\"
*(64 bit Windows) "C:\Program Files (x86)\Mozilla Firefox\"
*It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
*http://kb.mozillazine.org/Uninstalling_Firefox
Your bookmarks and other personal data are stored in the Firefox profile folder and won't be affected by an uninstall and (re)install, but make sure that "remove personal data" is NOT selected when you uninstall Firefox.
*http://kb.mozillazine.org/Profile_folder_-_Firefox
*http://kb.mozillazine.org/Profile_backup
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

After upgrade to Windows 8.1, ipod nano 7th gen not recognized

/after upgrading to Windows 8.1, ITunes does not recognize my ipod nano 7th gen. I have uninstalled and reinstalled ITunes but no luck. I have gone through all steps in troubleshooting, but it still doesn't recognize it. Help!

Hi cindywindy,
If your iPod Nano is no longer recognized in iTunes after a recent system upgrade, you may find the following article helpful (apologies if you have already seen it):
Apple Support: iPod not recognized in My Computer and in iTunes for Windows
http://support.apple.com/kb/ts1369
Regards,
- Brenden

Keyboard wireless key not working after upgrading to windows 8.1

Hello,
I am having hp pavilion dv6-6165tx notebook, where keyboard having a wireless button that turns ON and OFF all wireless devices, After upgrading to windows 8.1, HP Connection Manager is not getting installed, as well as Key is not working, key color turns red and white but no action is performed.
Kindly suggest me some solution.
Note: HP Doesn't provide drivers for windows 8/8.1 ONLY WINDOWS 7 for hp pavilion dv6-6165tx.
Thanks.

Hi @Jayesh_Bhadja ,
Thank you for visiting the HP Support Forums and Welcome. I have looked into your issue about your HP Pavilion dv6-6165tx Notebook and the Wireless keyboard not working correctly. Here is a link to troubleshoot the keyboard.
The HP Connection Manager is something that is for Windows 7 not Windows 8.1. I would uninstall this from your Notebook. Here is a link to the HP Support Assistant if you need it. Just download and run the application and it will help with the software and drivers on your system that need updating. It has a troubleshooting tool in this.
Make sure all your updates have been completed. I would try restarting my Notebook a few times.
If that does not help I would uninstall the keyboard from the Device manager.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Problems with your HP printer after upgrading to Windows 8.1

If you are experiencing problems with your HP printer after upgrading to Windows 8.1 please click on the below link and install the HP Print and Scan Doctor and run the utility to fix the issue.
www.hp.com/go/tools.
I was an HP employee
If I have helped you solve your issue please mark it as solved
**Say Thanks By Clicking on the Kudos Star**

Hi.....my laserjet 1536dnf mfp was working perfectly with win 8 pro....then I installed win 8.1 pro and now the computer ,which is part of a network,can not communicate with the scanner of the printer--it prints just fine. On another computer (running win 7 ) on the same network, the scanner and all other printer functions work just fine.
I have tried installing the latest drivers from HP......scanner still not "communicating" with computer.....also temporarily disabled firewall.....please help...all the best -David G (gossat)

Can't print in PSE11 after upgrading to windows 8.1

I have just upgraded from Windows8 to 8.1 and now can't print in PSE11. For some reason can in PSE7

I can print from other programs but not PSE. I have updated the drivers. I have attached 3 screen shots with error messages.
Tracy Ferreira 2607 Woodruff Rd.
Suite E-126
Simpsonville, SC 29681(864)350-4724www.onthespotportraits.com
From: hatstead <[email protected]>
To: Tracy Ferreira <[email protected]>
Sent: Tuesday, March 10, 2015 1:58 PM
Subject: can't print in PSE11 after upgrading to windows 8.1
can't print in PSE11 after upgrading to windows 8.1
created by hatstead in Photoshop Elements - View the full discussionWhat happens when you try?Any error messages?Do you have the latest drivers for the printer? If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7274523#7274523 and clicking ‘Correct’ below the answer Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7274523#7274523 To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following" Start a new discussion in Photoshop Elements by email or at Adobe Community For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

Ethernet LAN not working after upgrading to windows 8.1

After upgrading from Windows 8 to 8.1, my Ethernet LAN is no longer working. Wireless LAN connectivity is OK. I have run the HP Support Assistant and downloaded the drivers for 8.1. Hovever, I do not see a 8.1 driver listed for the Ethernet LAN.

You're very welcome. See if the recovery manager still works so you can roll back to W8. Please read this guide for how to use it. http://support.hp.com/us-en/document/c03489643 If it doesn't then you will have to order a set of recovery disks from HP, or you can install this plain W8 OEM software this guy has posted on a link. Lots of folks have used it successfully, which is why I posted it. https://docs.google.com/file/d/0B0W9PBigPy94aVJWSndyTFNFMzg/edit?pli=1 Then use this tool to make the iso file bootable to a DVD or 4+ GB USB flash drive. http://www.microsoft.com/en-us/download/windows-usb-dvd-download-tool Yes, that really stinks why you and I could not upgrade without an issue. I disabled about 5 or 6 devices in the device manager and the code 12 would not go away. I have no clue why the PC works fine on W8 but not on W8.1. My notebook is a few years older than yours and it worked fine on W8.1 but not on W10. Go figure...

Satellite A500 overheating after upgrading to windows 64bit

Similar Messages

Maybe you are looking for