Satellite A500 - TV tuner not recognized after updates installation

I recently ran some updates (Windows 7) for Satellite A500 (PSARA9A). It has an inbuilt tuner & it was working fine until the updates. Now when I go to watch TV or Record it comes up with "No tuner available to satisfy current request".
I tried to install new driver, but I can't tell if it's doing anything. Device manager tells me the latest drivers are installed, yet it shows yellow exclamation mark.
Can anyone suggest anything here??

Thanks for the replies, I appreciate it.
Still can't get the tuner to work.
I tried uninstalling it, it then tried to re-install, but failed.
Yet It tells me latest driver is installed. Still have yellow exclamation mark.
So decide to do a system restore.
Tuner still has the same issues & now Windows Media Center won't work either. it's quite frustrating.
Did a search for media center, which told me to turn it off & then on (in windows features).
Still not working. So yep, now have 2 issues.
Any further suggestions on either issue.

Similar Messages

Camera not recognized after update to mavericks 10.9.1

My MBP camera is not recognized by any applications since I updated the operating system to Mavericks. I updated to the latest version of Mavericks and still no luck. Does anyone know of a fix for this problem? Thank you.

Hey was facing the same problem with my girlfriend's macbook air, but i found a way to solve it:
Shut down the computer.
Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
Release all the keys and the power button at the same time.
Press the power button to turn on the computer.
Note: The LED on the MagSafe power adapter may change states or temporarily turn off when you reset the SMC.
its already there in the support page http://support.apple.com/kb/HT3964
Hope it helps

IPhone 4s not recognized after update to ios 7.1

My iPhone will no longer sync nor show up in windows explorer (running Windows 7) after installing update 7.1. It may be relevant to note that I had replaced the dock connector prior to updating to 7.1, but the device was still syncing and showing up in the explorer. After updating, it won't show up plugged in and not on WiFi sync either.
I have followed the advice here: http://support.apple.com/kb/ts1538
I have had no success. I have tried multiple cables which I don't believe are the issues since they charge just fine.
Has anyone discovered a solution besides the aforementioned for this?
UPDATE 1: It should also be important to note that the iphone does not show up in device manager AT ALL. Not under Universal Serial Bus controllers nor Imaging devices. There are no "Other Devices" or "Portable Devices" categories listed on my Device Manager.

Can anyone please help? This community is not like it used to be...
The worst part is, I cannot even do a restore since the device does not show in windows at all. I have even tried another computer and it is not showing up. At the very least, can someone tell me if they believe this is iPhone hardware related or iPhone software related?
As I said, the iPhone was syncing just fine after the dock connector replacement. It was only after updating from ios 7.0 to 7.1 that the problem arose.
Please any little bit of feedback is helpful.

Satellite M30: FN keys not working after IE7 installation

I installed IE7 and noticed that the fn keys no longer work. (Satellite M30)
I am not sure if that was the catalyst because I'm not sure how long the problem has existed for.
The only ones I use often are FN+f6 and +f7.
I really need to be able to adjust the brightness of the screen. Any and all help would be much appreciated.
Thanks.

Hi
First of all the display brightens can be changed also in the Toshiba Power Saver utility.
But its very strange that after the IE7 update the FN keys stopped working. I have installed the IE7 on my notebook and the FN keys still work fine.
So maybe its a simply something wring in the registry. Who knows ?:|
I would recommend reinstalling the Common Modules.
Maybe it helps!

Website shortcuts not recognized after updating to 33.0.2

This morning Firefox downloaded an automatic update to 33.0.2. At my place of employment, I have several 'shortcut' urls to internal websites which are not a www. format, they look like this:
http://sitenickname
I should just be able to type the word sitenickname into the bar and be taken there. However, after the update it takes me to my homepage and asks, "Did you mean to go to sitenickname?" and I have to click yes or no. Every time.
Is there a way I can make this a recognized keyword so I don't have to keep answering this question? And for my own future knowledge, what are these types of keywords properly called?
I really appreciate any help.

hello jscuffins, if you click yes on "Did you mean to go to sitenickname?" firefox should remember that choice the next time you enter this particular local domain and don't bring up the search page again: http://msujaws.wordpress.com/2014/08/01/faster-and-snappier-searches-now-in-firefox-aurora/
in case this does not work as intended, maybe have a look at [[How to fix preferences that won't save]]

Ipod not recognized after updating software

1. I returned my Ipod to Apple for battery service.
2. After getting it back, I updated the software on my computer.
3. When I plug in the Ipod, I get a message that the hardware did not install properly.
4. The Ipod does not have an error message on itself.
5. Itunes does not recognize the Ipod.
6. I've reset the thing about 20 times.
7. I'm about to throw the piece of crap away.

Jim,
Press "select"+"play" keys and you will see the disk mode sign. plug it with your PC, open the iPod updater and click Restore. Try to use the USB behind the computer instead of the front.

Why my Nikon D3200 is not recognized after updating to Yosemite?

Hello.
I'm using MacOSX Yosemite (10.10) and when I plug my Nikon D3200 nothing happens. It worked fine with MacOSX Mavericks (10.9).
I read a possible solution that involved deleting raw files on the system library but it did nothing.
Any suggestions about how to solve this issue? I really need my camera working with my Mac and that's not happening.
Thank you.
Best regards,
Telmo

This thread may give you some help:
RAW files suddenly show up as "not supported" (Aperture 3.5.1, OS X 10.10)

Password not recognized after updating iTunes

I just updated iTunes and now it doesn't recognize my password. Do I have to start another account?

If you start another account--you may have trouble playing things you already bought. Can you contact the store and have them reset your password? You can use the email links inside the store when you click on support.
On Edit: Does anything in this article help:
http://www.apple.com/support/itunes/store/password/

Reader dos not respond after update installation

My system is Win7 and yesterday after installation of an update for my Reader 10.0 version the program does not respond. I tried to uninstall and reinstall it many times but the result is always the same: when I double click onto the Reader symbole, the icon appears for 5 seconds trying to load the program and then disappears.
How to proceed?

Two more things to try...
Can you open Adobe Reader by itself? If so, try disabling Protected Mode [Edit | Preferences | Security (Enhanced)].
It could even be a malware issue; see http://helpx.adobe.com/acrobat/kb/reader-core-dll-error.html

Tascam US-122 not recognized after Leopard installation

Nothing is recognizing my Tascam US-122 since I upgraded to Leopard. I've looked for updated drivers at the Tascam site and I couldn't find anything referring to the US-122. I found drivers for the US-122L, but not the one I've got.
Any ideas. It's a drag not being able to use Garageband.

I believe I've solved my own problem finally, although I can't tell for sure without waking my wife.
I kept nosing around the TASCAM site and I finally figured out how to find more recent drivers. They have an option for "Resources" which I take to mean drivers, documentation and such, but whenever I tried to enter a choice in their pop-up, I was taken to a dead page.
But.
On the lower right margin of that page was an option to go to "Legacy". This lead my to a US-122 page and I found more recent drivers and installed them. Now I can see my US-122 in Preferences->Sound.
I'll try launching Garageband in the morning when I can make more sound to be sure.
You can go directly to the correct page here:
http://www.tascam.com/details;9,15,68,19.html

My iphone 3gs is not activating after updating my software with i tunes...what shall i do? cant i go back to my normal version which was ios 4.1

my iphone 3gs which is not associated with this accunt is not activating after updating the sof tware, it connects to i tunes but i tunes says "we arh your unable to continue with your activation at this time, please try again later or contact customer care". my iphone aslo just says it cannot be activated or something like that every time i try. i have been waiting for 4 hours now but it still hasnt worked. how can i uninstal this update and go back to my old version which ws ios 4.1 or or ios 4,3. i dont even know what version it updated to, im assuming it is ios5 but not sure. it says try connecting to i tunes as well but it is connected and i tunes cant activate it either. my phone is connect to a wifi but it stll says no service.
i will really appreciate some help.
thanks.

Generally this is a sign that the iPhone had previously been
hacked/modified/jailbroken and the update relocked it to the
original wireless carrier. If this is the case, only that wireless
carrier can unlock your iPhone. You must contact them to see
if they offer unlocking and if you qualify.
Where did you acquire this iPhone?
What wireless carrier did you use before this problem?
Does the app Cydia appear on your iPhone?
What does it say when you look at Settings=>General=>About=>Carrier?

Logitech trackball not recognized after 10.5.8 update- LCC 3.1 needed

Logitech Trackman wireless trackball was not recognized after 10.5.8 upgrade. At re-boot, the "searching for bluetooth mouse" screen appeared, pushing the re-set button on the wireless base and trackball did not solve the problem.
Had to plug in my Apple mouse (worked immediately), go to the Logitech website and download the latest Logitech Control Center software for Snow Leopard, dated 9/22/09 (version 3.1)
After install and re-start, Logitech hardware worked perfectly, as before.
Not sure if it would avoid this issue, but I recommend installing LCC 3.1 before you install the 10.5.8 update. That or be sure you have an Apple mouse on hand.

aaron08544 wrote:
Turns out the 10.5.8 update is missing a very important file which is
/usr/X11/lib/X11/fonts/misc/fonts.alias
After I copied one from my Centos 5.2 box, things are finally back to normal.
-Aaron
I have that file on my system and x11 was updated using 10.5.8 combo update. it works just fine.

After updating my ipad through i tunes all my games are not opening, After updating my ipad through i tunes all my games are not opening

After updating my ipad through i tunes all my games are not opening, After updating my ipad through i tunes all my games are not opening

This seems to be most common with lower resolution pictures. You can go into settings > general > accessibility and turn reduce motion motion off and then try to rescale. Or user a higher resolution picture, which works better with the new OS.

HT202274 Password change old password not recognized after 10.9.5 upgrade

God bless you, peace.
macbook pro 2012 user password not recognized after 10.9.4 too 10.9.5 upgrade plus tech work at apple.
I want to change user password, it is allowing me to get into user account and admin account on computer but I recently changed it for the tech work to be done. I would like to put the password back now to old password or a new one but... The few days old new password pre update and pre tech work is not being accepted to allow me to change to another password.
recent update, after 10.9.4 to 10.9.5 update and apple tech work done.
1. Tech work replaced optical drive,
2. 10.9.4 to 10.9.5 upgrade left computer endlessly booting up, then got into finder window tried to read backup drive and screen went to black curser and could not backup information as techs decided may need to be done before I left it with them.
3. Also track pad was not (is not again) selecting text to drag unless real hard press and then only intermittently would select text or just drop the selection (not hold the selected text after a long scroll select, did work at first after tech work but back to not working). It is still not responding easily when pressed, but it is much better, as they did something with software they said. Today While typing this I am trying to select words misspelled and it does not select them unless I press not as hard it is becoming the same as before I see now, sometimes less pressure is needed but more than should be used.
I noticed today after tech work The Spell check is not responding with a two finger tap on the red underlined misspelled words without multiple try's with two finger tap. The curser moves around after selecting words also, or when selecting words so hard the curser moves to another place not on the desired words or check box. The curser arrow tip should select the word but it does not recognize unless I put the tail of the arrow onto the word then it recognizes the misspelled word for spell check on two finger gesture.
It looks like I need to take it back, I tried to call and check to confirm if the track pad intermittently and curser adjustment was serviced. In order to verify I had called three times to get that information to no avail. endless looped in the phone que, one would answer take info and then forward me to a endless loop dial ing phone that never was picked up, supposedly at the Bay street store tech section. Phone voice mail from apple support status on the repair, ...Juliano from Bay Street Apple repair store Emeryville, ca left a voice message... just generically said optical drive replacement is successfulI, I noticed right away three items were to be addressed but only the optical drive was mentioned, so I called three times to try and verify the other problems. One whole minute just to select this text and copy it to notes for a backup. It would not select at first, then after selected it would not copy it, then it would not paste to notes, it paste the last cut and paste I did 10 minutes ago.
I do not have a easy excellent wifi connection for my wifi only phone and would prefer email or chat for repair help. apple Repair No: R142180337

Try running the combo update. It fixes more files/data than the App Store upgrade.
10.9.2

Camera RAW, file not recognized after import and migration, Aperture 2.1

Hi,
I have recently purchased a 1DMKIII and am constantly getting "file not recognized" after I import and even after migrating RAW files. My 1DS MK1 RAW files have no issues. The RAW files render just fine using CS4 bridge. Any ideas here on a fix? Other than ditching Aperture (not desireable)
Thanks,
Greg

Hummmm..I have just 'manned-up' from a 2gb macbook running tiger+CS4 to a iMac 24" 8gb running leopard BUT!
I shoot RAW and the iMac will not recognize the NEF RAW files! this is soo frustrating - tried to update Camera Raw but to no avail.
please help! I've got 987 raw wedding photos to process!!
I dont know what to do!

Satellite A500 - TV tuner not recognized after updates installation

Similar Messages

Maybe you are looking for