Satellite A505-S6004 - Unknown device on Windows Server 2008 R2 64bit

I was try to install Windows Server 2008 R2 64 bit on a A505-S6004 (originally Windows 7 Home Premium) on a new disk. Having downloaded and installed numerous Toshiba website drivers for Windows 7 and installing, I have two things left in device manager that I don't know what to get for them.
The info is under Other devices-Base System Device-PCI Bus 3, Device 0, Function1 and ..., Function2.
Any ideas what this may be?

It turns out I missed a driver, Ricoh Card Reader for Windows 7:
http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/modelContent.jsp?ct=DL&os=&category=&moid=2515201& rpn=PSAT6U&modelFilter=A505-S6004&selCategory=3&selFamily=1073768663#

Similar Messages

Error Installing InDesign CS3 Server on Windows Server 2008 R2 64BIT

Hello there-
I'm trying to install InDesign CS3 Server on Windows Server 2008 R2 64BIT (x64) Edition, however, we get a failure indication on the installer. Before, we have installed it properly on Windows Server 2008 R2 32BIT (x32) but some how we cannot proceed on a x64 box.
Is there any limitation on this sense? Any documentation about it?
Thanks and appreciate your answers.
Regards,
Gustavo Ortega
Software Engineer

Hello,
Have you followed these recommendations from the installation guide ( Installation Guide u2013 SAP Content Server on Windows 2008 ) :
Note: In the IIS 7.0/7.5, all the roles are not selected during the installation by default,
Please make sure all the below roles are included and IIS 7.0/7.5 is installed.
Roles needed in IIS 7.0/IIS 7.5.
Common HTTP Features
Static Content
Default Document
Directory Browsing
HTTP Errors
HTTP Redirection
Application Development
ISAPI Extensions
ISAPI Filters
Health and Diagnostics
HTTP Logging
Logging Tools
Request Monitor
Tracing
Custom Logging
ODBC Logging
Security
Basic Authentication
Windows Authentication
Request Filtering
Note : Anonymous Authentication should be enabled.
Performance
Static content Compression
Dynamic Content Compression
Management Tools
IIS Management Console
IIS Management Scripts and Tools
Management Service
IIS 6 Management Compatibility
IIS 6 Metabase compatibility
IIS 6 WMI Compatibility
IIS 6 Scripting Tools
IIS 6 Management Console
Note: There is a File Upload limitation in IIS 7 on Windows 2008 Server, IIS will reject any file that is
larger than 30 MB. This is a default limitation of IIS. You can increase the maximum file size by
setting the parameter maxAllowedContentLength in the file ApplicationHost.config.
The following command can be used to set the parameter from the command prompt, please
change the directory to Windows\System32\inetserv and then execute the command.
appcmd setconfig /section:requestFiltering/requestLimits.maxAllowedContentLength:150000000
The value is only an example, in this case the upload limit is set to 150MB.Server has to be restarted
after execution of this command.
Also, are you using Maxdb to store the files or is it a "flat files" content server ?
HTH.
Steve.

Oracle DB 10g XE on Windows Server 2008 R2 64bit

Hello to everybody!
I have and old pc with Windows Server 2003 (32 bit) where i've installed Oracle DB 10g XE. Everything works fine.
Now i have to migrate the DB from that old machine to a new one with Windows Server 2008 R2 64bit.
I've tryied to install the Oracle DB 10g XE into the new server but, after installation is finished, i wasn't able to open the DB homepage at http://127.0.0.1:8080/apex. It said "This page can't be displayed". I try with SQLPLUS but after i insert the admin credentials i obtain these lines:
ERROR:
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Where can be the problem?

>> ORA-01034: ORACLE not available
Database is not running. Most likely the installer did not complete all its tasks, it can happen.
For windows, the database service has to be set up (see Start/Run/services.msc), services started, installer creates the database, and quite a few other setup chores. If the database creation fails, all the other stuff is not relevant.
Under the <drive:>oraclexe folder there *should* be a datafiles (*.DBF) files somewhere. Can't recall the exact location for 10g. Try file explorer and a search for *.dbf files, that will probably come up empty.
Note the requirements, at Oracle&reg; Database Express Edition it calls for x86, not x64. The 11g XE also has lots of trouble getting a successful install on x64 as well, note the Download page states "does not work on x64" although some folks have gotten it to work.Try the deinstall steps, and use a right click/run as Administrator that *might* get past the UAC glitch that happens on the later OS versions.

OBI11g installation on Windows Server 2008 R2 (64bit)

Hi,
Sorry to pick up this topic again, but my research in the forum and other inet sites doesn't help me so far and my installation will not work.
My Situation:
I have a Windows Server 2008 R2 (64bit) default installlation. The server (HyperV-managed) has 4 GB RAM.
I added a Loopback adaptor and set for the loopbackadapter a fixed IP (10.10.10.10 Subnet: 255.255.255.0).
Entered in the host file (127.0.0.1 localhost and 10.10.10.10 servername)
Installed JDK 64bit
Installed Oracle Client 32bit
Then I tried all three options:
1) Default OBIEE Installation --> start of coreapplication_obips1 has failed. Everything else was fine. I was not able to start the obips1 manually
2) Enterprise Installation --> start of coreapplication_obips1 has failed. Everything else was fine. I was not able to start the obips1 manually
3) Manually installed WebLogic 1033 --> SoftwareOnly installation of OBIEE --> manually start config of OBI Installation --> same result as above!
Perhaps you have some hints for me.
Cheers
Wolfgang

Not in the slightest - I installed five just the other week
All our virtual machines, running 2008 R2 x64. We went for Enterprise Edition, but I believe in CF9 they're both 64-bit anyway. These are the from the build notes I built up:
Install extra roles:
    Application Server
    Web Server (IIS)
      Application Development
      IIS6 METABASE Compatibility
Install extra Features:
    SMTP Service
Other than that nothing else needs doing. It's worth noting (as a slight but irritating aside) that in 2008 R2 the SMTP service is set to Manual not Automatic, so you'll want to change that unless you want your emails to stop every time you reboot the box.
But the actual install itself was far simpler than CF8 on 2008.
O.

Problem of SAPConsle 7.10 (Patch 13) on Windows server 2008 R2 (64bit)

My company is moving from server 2003 to Server 2008 R2 (64bit). We installed SAPConsole 7.10 (Patch level 13) on test server without any problem and configured the profiles in SAPConsole administrator. However when we running the sapcnsl.exe from command prompt, it prompt with error message "*** ERROR => ***AgCom (006FC558): Error: Internal error" and failed to get the SAP login screen.
I checked SAP Note 1043241 saying SAPConsole 710 as patch level 7 could support Windows server 2008 (32/64bit) both.
Can anyone help advise on my issue? or is there anyone has testl the SAPConsole 710 on Server 2008 R2 64bit successfully?
Thank you very much!

Hello Jackcd,
I am not an expert in this area but I did a message search for "AgCom error internal error" and I found a message where the customer solved the problem by using a patch. In the customers own words:
"I installed sapgui 7.10 Patch level 6 on the server where I installed SAPCONSOLE 7.10. Now, the sapconsole working."
The Sapinator

Cisco NAC 4.8 and Windows Server 2008 Enterprise 64bit SSO

Hi,
     I try to setup SSO on Cisco NAC 4.8 and Windows Server 2008 Enterprise 64bit, but I can't start Active Directory SSO Service that show error follow below. I saw this error " KDC has no support for encryption type (14)" . Could anyone help me to troubleshoot this problem?
FQDN: active.test.com
Domain Name : test.com
User : ccasso
2011-02-05 12:00:30.225 +0700 WARN com.perfigo.wlan.jmx.adsso.GSSServer
- Server was not running ...
2011-02-05 12:00:30.225 +0700 INFO com.perfigo.wlan.jmx.adsso.GSSServer
- Server starting server ...
2011-02-05 12:00:30.225 +0700 INFO com.perfigo.wlan.jmx.adsso.GSSServer
- Server is now running ...
2011-02-05 12:00:30.225 +0700 INFO com.perfigo.wlan.jmx.adsso.GSSServer
- GSSServer - SPN : [ccasso/[email protected]]
2011-02-05 12:00:30.225 +0700 INFO com.perfigo.wlan.jmx.adsso.GSSServer
- GSSServer - building kdc list for domain active.test.com
2011-02-05 12:00:40.224 +0700 INFO com.perfigo.wlan.jmx.adsso.GSSServer
- GSSServer - done building kdc list for domain active.test.com
2011-02-05 12:00:40.224 +0700 INFO com.perfigo.wlan.jmx.adsso.GSSServer
- GSSServer - KDC(s) :[10.0.240.100]
2011-02-05 12:00:40.224 +0700 INFO com.perfigo.wlan.jmx.adsso.GSSServer
- GSSServer - writeKrbFile: writing to file ../conf/krb.txt
2011-02-05 12:00:40.224 +0700 INFO com.perfigo.wlan.jmx.adsso.GSSServer
- GSSServer - writeKrbFile: wrote to file ../conf/krb.txt
2011-02-05 12:00:40.224 +0700 INFO com.perfigo.wlan.jmx.adsso.GSSServer
- GSSServer - creating login context ...
2011-02-05 12:00:40.224 +0700 INFO com.perfigo.wlan.jmx.adsso.GSSServer
- GSSServer - created login context ...javax.security.auth.login.LoginCon
text@5ad7b2
2011-02-05 12:00:40.239 +0700 ERROR com.perfigo.wlan.jmx.adsso.GSSServer
- Unable to start server ... KDC has no support for encryption type (14)
2011-02-05 12:00:50.244 +0700 INFO com.perfigo.wlan.jmx.adsso.GSSServer
- Notifying GSSServer status Stopped
2011-02-05 12:00:50.244 +0700 INFO com.perfigo.wlan.jmx.adsso.GSSServer
- server is exiting .

Hi,
This error means that your DC does not support the encryption method the ACS wants to use.
Usually this happens when you run 2008 Server with 2003 functionality...
You will need to run ktpass.exe according to the DC you are running:
http://www.cisco.com/en/US/docs/security/nac/appliance/configuration_guide/48/cas/s_adsso.html#wp1277452.
For Windows 2008 Server at 2003 Server functional level:
ktpass -princ newadsso/[adserver.][email protected] -mapuser newadsso -pass
PasswordText -out c:\newadsso.keytab -ptype KRB5_NT_PRINCIPAL
HTH,
Tiago
If this helps you and/or answers your question please mark the question as "answered" and/or rate it, so other users can easily find it.

Now there is no available of windows server 2008 R2 64bit download. so i want to know the equivelent product in server 2012?

now there is no available of windows server 2008 R2 64bit download. so i want to know the equivelent product in server 2012?

Hi,
Windows 2008 R2 and Windows 2012 are not equivelent product, there are many new features in Windows 2012, and Windows Server 2008 R2 Evaluation (180 days) still availabe:
http://www.microsoft.com/en-us/download/details.aspx?id=11093
Regards,
Yan Li
Yan Li
TechNet Community Support

Virtual Devices and windows server 2008 R2

We are running windows server 2008 R2 - we have a virtual environment using Ncomputing devices - VSPACE hypervisor. We have an HP Photo smart printer 8050 which has card reader ports. The Photo smart printer is connected via usb to the thin client
device. Server recognizes the device but we get an error across all virtual units hard disk missing, we get this four times which is the number of card reader ports on the HP printer.
Under device manager we see :
Portable Devices
WPD File System Volume Driver with a yellow exclamation point
This device cannot start Code 10
Location = UMBus Enumerator - Portable Devices WPD FileSystem Volume Driver
Looks like server 2008 is not seeing the card-readers properly hence the WPD error.
I am having trouble finding anything on HP's site as far as a specific driver for server 2008
any help is appreciated, it is driving everyone crazy, one more note, users not on the Thin Client environment are not receiving the messages. (standard pc connected users)

Hi fpca18042,
>>We are running windows server 2008 R2 - we have a virtual environment using Ncomputing devices - VSPACE hypervisor.
>>We have an HP Photo smart printer 8050 which has card reader ports. The Photo smart printer is connected via usb to the thin client device.
>>Server recognizes the device but we get an error across all virtual units hard disk missing,
It seems that it is not a windows server issue .
As far as I know , VMs can not access hardware directly in hyper-v .
If "Ncomputing devices-VSPACE hypervisor" is a hypervisor ,I would suggest you to contact "Ncomputing devices-VSPACE hypervisor" for further assistance .
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Is it Possible to install ODDC 32 bit on Windows Server 2008 R2(64bit)?

Hi All,
Is it Support to Install ODDC 32 bit on Windows Server 2008 R2(64 bit).
I am Posting this bcoz I did not found any ODDC related Blogs.
Please help on this
Thanks,
Raj

The certification matrix ( http://www.oracle.com/technetwork/middleware/webcenter/content/odc-cert-matrix-214688.pdf ) does not mention OS for ODDC Server, but as ODC is certified for Win Server 2008, R2, 32 or 64 bit, I believe the answer is yes.
Make sure, however, that you ODDC clients run on a different OS (see Exceptions).

ACS any Version with Domain Controller on Windows Server 2008 R2 64bit

Hi All
Is there currently any ACS version working with Windows Server 2008 R2 domain controllers?
Our server stuff has recently upgraded the Domain Controllers to 2008r2 and turned off the 2003 servers. This didn't make our ACS 4.1.4 really happy.
I've read now serveral posts regarding issues with ACS and Server 2008r2 and hope to find a solution (besides switching to LDAP, yukk).
Thanks
pato

Hi AllIs there currently any ACS version working with Windows Server 2008 R2 domain controllers?Our
server stuff has recently upgraded the Domain Controllers to 2008r2 and
turned off the 2003 servers. This didn't make our ACS 4.1.4 really
happy.I've read now serveral posts regarding issues with ACS and
Server 2008r2 and hope to find a solution (besides switching to LDAP,
yukk).Thankspato
Hi Pato,
Just check out the below link hope that help.
http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_server_for_windows/4.2/release/notes/ACS42_RN.html
As per the link it says The support for Windows Server 2008 is applicable for ACS 4.2 Patch 4 onwards.
Hope to Help !!
Remember to rate the helpful post
Ganesh.H

OWB 11gr2 32Bit on Windows Server 2008 R2 64Bit Error 0xC0000018

Hi there.
I had install Oracle Warehouse Builder g11 R2 32 Bit version on a Windows Server 2008 R2 64 Bit version.
After the install, my setowbenv.bat looks like:
@echo off
REM This file is automatically generated from shiphome/owb/bin/win32/owbEnv.ctl
REM Any manual changes will be lost on next generation.
set JAVAPATH=..\..\..\jdk
set ORACLE_HOME=C:\product\11.2.0\dbhome_2
set OWB_HOME=C:\product\11.2.0\dbhome_2
set JDK_HOME=..\..\..\jdk
set ORA_HOME=C:\product\11.2.0\dbhome_2
set OEM_HOME=C:\product\11.2.0\dbhome_2
set IAS_HOME=C:\product\11.2.0\dbhome_2
set OWBCC_HOME=C:\product\11.2.0\dbhome_2
set CLASSPATH=Personalities.jar;%MIMB_JAR%;
set CLASSPATH_LAUNCHER=-classpath %CLASSPATH%;..\admin\;..\admin\launcher.jar -D OWB_HOME=%OWB_HOME% -D JDK_HOME=%JDK_HOME% -D SYSTEMROOT=%SystemRoot% -D ORA_HOME=%ORA_HOME% -D OEM_HOME=%OEM_HOME% -D IAS_HOME=%IAS_HOME% -Doracle.net.tns_admin=%ORA_HOME%\network\admin Launcher ..\admin\owb.classpath cd /d ..\admin
And if I start the Warehouse Builder - Design Center, I get an error message something like:
owb.exe - Application error
<The Application couldn't start correctly (0xc0000018). Click to "OK" to close the application.> (translated from german)
Can someone help me?
What did I do wrong?
Is there any work around?
Thanks a lot.
hakki

Hi Deb
With the code that's out today I don't think the compatibility mode works, from what I can read from users' experencies on LinkedIn discussions.
Customers have used Windows XP mode for Windows 7 (for example), this installs a Windows XP virtual machine in which you can install and run OWB 11gR2 on your Windows 7 (64-bit) workstation. Windows XP mode can be downloaded from:
http://www.microsoft.com/windows/virtual-pc/download.aspx
You should also increase your XP mode virtual machine memory (RAM) allocation to at least 1GB for it to perform at an acceptable level. This will get you going until there is a better option.
Cheers
David

Satellite U200-124 - Unknown devices with Windows XP SP2

I downloaded Toshiba U200 drivers for Windows XP from this site, install Windows, install all drivers.
Well.
But i have 2 unrecognized devices in device manager.
1. NIC 1394. Device Code V1394\NIC1394\92423A3900
2. PCI Device. Device Code PCI\VEN_104C&DEV_803C&SUSBSYS_00011179&REV_00\4&6B 16D5B&0&5BF0
Modem & FireWire are not working.
What can I do?

As Ivan said the drivers are not installed correctly and therefore the unknown devices appear in the device manager.
The installation instruction shows the right installation order. This order is necessary and important to get all devices working!!!
Please visit the Toshiba European driver page, choose the right series and download and install the right and compatible drivers like mentioned in the txt. file

Windows Server 2008 Standard 64Bit

We need Windows 2008 Standard 64 bit.
So please convert Windows 2008 Standard 32bit to Windows 2008 Standard 64bit.
Please send me the link of Windows 2008 Standard 64Bit ISO Image File
Regards
Sandeep Sahadevan

Media is not free. If you have a regular Microsoft reseller with whom you deal, you should contact them in order to purchase the media. Otherwise, you can contact Microsoft. This forum is not an official way to contact Microsoft.
At the bottom of this page you will see a Contact Us link. Follow that to contact Microsoft to see how you can obtain a copy of the distribution.
If you have a volume license agreement (any organization buying as few as five licenses from Microsoft should have such an agreement because that is when discounts start), then you can download it from the volume licensing site - you need credentials from
your license agreement.
. : | : . : | : . tim

Is my OLE DB installation done correctly on Windows Server 2008 R2 64bit?

I have installed Instant Client thru Instant Client option in Oracle Database 11g Release 2 Client (11.2.0.1.0) for Microsoft Windows (x64) NOT thru Instant Client package.
Then I installed the oledb from 64-bit ODAC 11.2 Release 3 (11.2.0.2.1) for Windows x64 by executing install.bat oledb c:\oracle odac.
I find the following values in registries:
under HKEY_LOCAL_MACHINE\SOFTWARE\Oracle\KEY_odac:
NLS_LANG has the value AMERICAN_AMERICA.WE8MSWIN1252
OLEDB has the value c:\Oracle\oledb\mesg
ORACLE_GROUP_NAME has the value Oracle - odac
ORACLE_HOME has the value c:\Oracle
ORACLE_HOME_NAME has the value odac
under HKEY_LOCAL_MACHINE\SOFTWARE\Oracle\KEY_OraClient11g_home1:
NLS_LANG has the value AMERICAN_AMERICA.WE8MSWIN1252
ORACLE_GROUP_NAME has the value Oracle - OraClient11g_home1
ORACLE_HOME has the value C:\Oracle\product\11.2.0\client_1
ORACLE_HOME_NAME has the value OraClient11g_home1
I wonder whether I have done the installations incorrectly since some keys have different values between the 2 registries.

I have no doubt that the problem in the OS localization.
But, taking into account some facts:
World population is estimated to number 7.126 billion people.
Anglosphere is about 740 million people.
I have not found information about the supported OS languages.
I'm worried about losing my non-English data.
I am for the licensed software, but a trial and registered OS has the same functionality, and displays messages/data in the same way.
I doubt that the OS registration will allow installer to properly finish and even display the error correctly. (Java strings is UTF-based, so, developers should set correct code page. Probably, because system code page can be different with console code page (cp866 for Russian). Current codepage could be view by executing "chcp" in console).
In any case Enterprise-class product should operate correctly on each supported systems, or inform about problems before.

Crystal Report 2008 on Windows Server 2008 64bit

hi,
I tried to run a Crystal Reports Web Application on a Windows Server 2008 64bit but I got this error:
"Bei der Erzeugung des Reports ist ein Fehler aufgetreten.
Der Typeninitialisierer für "CrystalDecisions.CrystalReports.Engine.ReportDocument" hat eine Ausnahme verursacht.
CrystalDecisions.CrystalReports.Engine.LoadSaveReportException: Fehler beim Versuch, die Crystal Reports-Laufzeit zu laden.
Entweder reichen die Berechtigungen des Crystal Reports-Registrierungsschlüssels nicht aus, oder die Crystal Reports-Laufzeit wurde nicht ordnungsgemäß installiert.
Installieren Sie die geeignete verteilbare Crystal Reports-Datei (CRRedist*.msi), die die erforderliche Version der Crystal Reports-Laufzeit (x86, x64 oder Itanium) enthält. Weitere Informationen erhalten Sie unter folgender Adresse: http://www.germany.businessobjects.com/support/default.asp.
"Please install the appropriate Crystal Reports redistributable (CRRedist*.msi) containing the correct version of the Crystal Reports runtime (x86, x64, or Itanium) required. Please go to http://www.businessobjects.com/support for more information.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: CrystalDecisions.CrystalReports.Engine.LoadSaveReportException: An error has occurred while attempting to load the Crystal Reports runtime.
Either the Crystal Reports registry key permissions are insufficient or the Crystal Reports runtime is not installed correctly.
Please install the appropriate Crystal Reports redistributable (CRRedist*.msi) containing the correct version of the Crystal Reports runtime (x86, x64, or Itanium) required. Please go to http://www.businessobjects.com/support for more information."
The System:
- Windows Server 2008 Standard 64bit SP2
- Microsoft .NET Framework 3.5 SP1
- Oracle Client 10gR2 64bit
- I tried Crystal Report 2008 Runtime, Crystal Report 2008 Runtime SP1, Crystal Report 2008 Runtime SP2, Crystal Report 2008 Runtime SP3.
- Crystal Report Basic Runtime for Visual Studio 2008 (x64)
On a 32bit-system or 32bit-mode (and 32bit Oracle Client) everything is working fine. But I have to use the 64bit Oracle Client, therefore, Crystal Report have to work in 64bit-mode.
Is it possible and what is to do to get it working, thanks,
Martin

It does work on 64 bit OS - as a 32 bit application. CR 2008 is 32 bit only.
See the article [Crystal Reports support of 64 bit Operating Systems|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/10d5fa88-2013-2c10-c9a5-f11963607d4e] for more info.
Ludek

Satellite A505-S6004 - Unknown device on Windows Server 2008 R2 64bit

Similar Messages

Maybe you are looking for