Satellite A505-S6025: Win 7 64bit - driver ACPI\TOS1901 fails

I have that problem and my laptop freeze.
If anyone knows what it is and how i can fix it.
thanks!!!
the driver\driver\fwlnk failed to load for the device ACPI\TOS1901\2&daba3ff&2

Hi
Install the Toshiba Value Added Package for Win 7 64bit and check if it will solve your problem.
The driver for ACPI\TOS1901 seems to belongs to Value Added Package
As Im not mistaken the Satellite A505-S6025 was released in USA. Therefore you should use the Toshiba US driver page to get the package.

Similar Messages

  • Satellite A300D PSAKCE - Win 7 64bit driver problems

    Sorry for my english - google translated
    When toshiba plans to release drivers for Windows 7 64bit? I can not use properly my operating system, not to mention that "Toshiba recommends Windows 7", but offers no drivers for it.
    The laptop is A300D PSAKCE. every month i go to service because it gives numerous defects.
    Before that I was disappointed that the sound card on my new laptop has just Mic recording, no Line in, no Stereo Mix, and had to buy foreign.
    What I can tell you is that you need to tighten not a little, much!

    Hi
    To be honest I also don’t know when Toshiba will release Windows 7 drivers for this notebook but I noticed that every day more and more drivers will be released. I can understand you that you want Windows 7 drivers as fast as possible but for some models it takes longer I think. I’m also waiting for some drivers…
    I recommend checking the Toshiba page from time to time. Maybe they will be released in next days. Who knows? ?:|
    By the way: Have you tried the Vista drivers? The most of them work on Windows 7 too. I can say this from my own experience.

  • Re: Win 7 64bit driver request for Satellite A300-247 PSAGCE

    Hello everyone,
    I have an Satellite A300-247 PSAGCE With the Vista operating system and I want to replace to Windows 7 64-bit I do not know which driver should prepare before formatting?
    Video card Driver not found too?
    Thank you all oren !!

    > can not touch pad scroll up with the finger ?
    Download the touchpad driver released for newer notebook series for example A660 or other
    > I had a web camera Software can not find ?
    The same like touchpad driver you can use the software from other notebook series where Win 7 64bit is fully supported.
    > The lighting of the Touch buttons Always on And you can not turn off?
    This option is placed in BIOS. Its called Illumination and you can enable and disable this in BIOS.

  • Satellite C660-1ZM Win 7 64bit: mousepad and USB - "code 52" driver error

    Hello,
    Having recently set up a new Satellite C660-1ZM running Windows 7 64bit (upgraded from Home Premium to Ultimate) for a friend, the mousepad and USB ports have suddenly stopped working. The drivers show an exclamation mark against them and the error is "code 52" which is related to driver signing. Windows doesn't seem to recognise the driver signatures for the published drivers that came on the machine's pre-installed disc, so the devices don't work. I've updated the drivers (Intel chipset [which includes USB]; Synaptics touchpad) to the latest ones publised on the Toshiba web site - and we have the same problem.
    Pressing F8 on boot allows you to select "disable checking of driver signing" in the WIndows 7 boot options, which then enables the drivers and all is well, until you reboot - at which point you have to hit F8 again.
    I think that one of the many recent Windows updates has somehow messed things up, but we can't easily prove that. The machine worked fine for a week or so, then the mousepad suddenly quit working around 8th August 2012.
    1) Are there valid signed drivers that pass whatever checks Microsoft impose on driver signing, including whatever checks they've potentially just imposed via some recently inflicted update?
    2) Does anyone know exactly how to disable the checking of driver signing permanently, so that a reboot will not require the F8 keypress and so on?
    Uninstalling the mousepad driver and rebooting gives the basic mouse functionality, without the Synaptics cleverness. However, the USB ports still don't work because their driver doesn't load, so an external mouse doesn't work.
    It's an infernal nusiance. Driving the system off the keyboard to uninstall drivers etc. is not much fun.
    Cheers, Colin.

    Hi
    Did you receive the error that windows cannot verify the digital signature for the drivers required for this device? Usually this means the error code 52
    Since the USB drivers are parts of the Windows OS, I dont think that this could be an signature issue I think some files are damaged.
    Try to uninstalling/reinstalling the driver and deleting the device and its drivers from device manager before reinstalling.
    Usually this should help, if not, well try to repair the system.
    Power up the unit and press F8. Then choose Repair my Computer.
    Now choose the first option which would help to repair the system.

  • Satellite A300-1FP - Chicony webcam Win 7 64bit - driver open failed

    Greetings
    I recently did a clean install of Windows 7 64 bit on my Toshiba Satellite A300-1FP. I was surprised at how smoothly it went. The only thing that was missing was a Windows 7 driver for the Chicony Webcam. A number of people on these forums have suggested using the Vista 64 bit driver. I tried numerous times to make this work. I deleted the startup entry, deleted and resinstalled the driver from device manager, etc. Everything I have found on these forums I've tried.
    None of it works. I continue to get the error message "Webcam driver open failed. Please restart camera or computer."
    Even with the "camera assistant" the Chicony camera is really awful. Had I know before I bought the machine I would have chosen otherwise. Too late now. Without the assitant you have only the driver that comes with Windows 7 which allows you to use the camera but unless you have Hollywood quality lighting the video is so dark that it is nearly unusable. The "camera assistant" at least had a booster for darker rooms.
    I don't know why Toshiba ever used this camera in the first place.
    There are many people with this same exact problem who are looking for help in the various forums for their system.
    If anyone knows how to handle this I would really appreciate hearing from you. Toshiba, if you're listening, what were you thinking?
    Dave

    Hello
    Just a little question: Have you tried this?
    [Why an error message displayed "Webcam driver open fail. Restart camera or computer"?|http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=18]
    Furthermore it would be interesting to know if the same happens with factory settings. Can you check this please?
    Greets

  • Satellite A305-S6858 win XP video driver not working

    I recently bought a Satellite A305-S6858 in the States and I downgraded the Vista Home premium pre-installed
    to Win XP 32 sp 3. I had several problems in getting the computer up and running. After reading several posts
    on various forums I managed to install the OS but I am still unable to use the Intel video driver.
    After installing the ones available on the toshiba web site I still have in Device Manager under the video adapter node
    2 Mobile Chipset 965 entries with an exclamation point.
    I recently discovered that not having the video driver installed the OS doesn't allow Stanby and Hibernate as power down options.
    Has anyone stumbled in the same issue?
    Thank you

    You need to install the Base drivers first.
    Try installing the Intel Chipset Driver first, then the Display Driver.

  • Networking printer problem Win 7 64bit driver won't connect with win 32 bit

    HP 1320 installed on Win 7 64 bit with driver 1320 PCL 5 won't let win xp 32bit computer connect.  It's looking for NT print file.  I followed instructions to open a local port and it connects, but only prints blank pages. 
    New HP Computer found the printer driver which is different number PCL 5 from the original PCL 6.  So I loaded PCL 5 on xp computer.  Still won't print.
    Someone please give me a fix for this.  I posted this message on the troubleshooting page but got no response.
    I need HP support on this, PLEASE.

    Hi wiry11,
    HP LaserJet 1320 is a commercial line product. For the best answer to your questions you will need to repost your question to the following links.
    http://h30499.www3.hp.com/t5/Business-Support-Forums/ct-p/business-support
    http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
    I am an HP employee.
    Say Thanks by clicking the Kudos Star in the post that helped you.
    Please mark the post that solves your problem as "Accepted Solution"

  • CD ROM not recognized satellite A505-S6980 Win 7 home sp1

    have laptop where cant access cd rom.  ran all updates you put a cd in and get a hour glass then see cdbeing accessed. drive seems to have power will open and close.  Any thoughts?  WIN 7 Home addition sp1
    Solved!
    Go to Solution.

    Hello,
    Do the upper and lower filter troubleshooting.
    Click on start, type REGEDIT on seach programs and files then hit enter.
    It will go directly to registry editor.
    Look for HKEY_LOCAL_MACHINE click on + sign or the arrow then look for SYSTEM click on + sign or the arrow then look for CurrentControlSet click on + sign or the arrow then look for Control click on + sign or the arrow then look for Class click on + sign or the arrow then look for {4D36E965-E325-11CE-BFC1-08002BE10318} click on + sign or the arrow then look on the right part of the window, look for LowerFilter and upper filter. Delete them or even if you can only find one of them, just delete it then restart the laptop.
    Hope this work

  • Poor wireless connection reported on Satellite L500-1DT (Win 7 - 64bit)

    Hi there,
    Hopefully someone might be able to help me with this problem. I brought a L500-1DT for my eldest daughter for Christmas (and birthday) but I am having problems with the connection to my wireless router. From her bedroom (about 10 meters away) she is luckly to get a reception of 3 bars (out of five) and is getting wireless drop outs. This means that MSN drops out at a critical moment...well she is only 16 so everything on MSN is critical.
    At first I thought that it was the old wireles router (my wife has problems with her IBM laptop and the other kids their Acer laptop) so I got a new Belkin N (150) router. This seems to have solved the problem with the non Toshiba laptops but there are still issues with the L500-1DT. If I have the Toshiba laptop in the same room as the router I get 4 bars (out of 5) at best.
    I have checked to make sure that there are no newer driver updates and checked all the settings (more than once) and I am at a loss as to what I should do now. Is the laptop faulty or have I missed something?
    Regards,
    The Build Master

    > If I have the Toshiba laptop in the same room as the router I get 4 bars (out of 5) at best.
    4 of 5 is not bad mate.
    It's ok...
    But if you want you can check if an new BIOS is available for this notebook model...
    If yes you can try to update it.
    Furthermore you can try to change the WLan channel. The router and Wlan card should be set to the same channel.
    In device manager -> Wlan card properties -> Advanced tab you can change some settings.

  • Satellite A300-24x: Win XP display driver installation issue

    I can't install display driver.
    I got the message:
    +This computer does not meet minimum requierements for instaling the software+
    +setup will exit+
    All other drivers are installed.

    Hi
    Where did you download the display driver?
    Normally if you download the drivers on the Toshiba website they are working properly because they are pretested from Toshiba.
    I assume you have downloaded a driver for another model or chipset so check the Toshiba page:
    http://eu.computers.toshiba-europe.com > Support & Downloads > Download Drivers
    Greets

  • Satellite A300D-15B PSAKCE - Cannot install the Win XP 64bit sound driver

    Hello all,
    This is my first post here after lurking for the last week or two, My hope is that somewhere here there is help and hence hope!
    I have a wonderful Toshiba A300D-15B PSAKCE with 4GB/O RAM, however I am suffering from some problems that the holy SEARCH function cannot solve. I use this laptop as a development box for uni/work alas...
    After an absolute nightmare with Vista32 and Vista64 I decided to go back to windows XP32, however this wont install, keeps claiming a CRC file failure after (and yes this is with the SATA in IDE mode and with an XPSP2 disk)
    I decided that I really DONT want to goback to Vista, so installed Windows XP64. Now the initial Instal goes very easy, I have the basic setup, the chipset, graphics, network, processor, usb, pretty much the basic... except... and this is where I have lost most of my hair.... SOUND!
    Firstly attempting to install the sound driver results in Failure, claiming the mmdriver.inf cannot be found or corrupt, obviously I checked, and yes there it is, for the sake of it downloaded the MMDRIVER.INF and placed it system32, and still the install fails.
    I have also tried a "Manual Install", from the .inf files... this includes the XP32/64 drivers and the Vista 32/64 bit drivers, still the same
    problem, driver continues to fail install. I am becoming increasingly bald. Outstanding Drivers that WONT install
    *-Audio Device on High Defninition Audio Bus*
    *-Mass Storage Controller*
    *-Modem Device on High Defninition Audio Bus*
    *-USB Device*
    If the following is any help, (Sandra 2008)
    *-Disk Controller*
    (AMD(ATI) SB700 SATA Controller [IDE Mode])
    *-Disk Controller*
    (Toshiba SB700 IDE)
    *-Audio Device*
    (Toshiba IXP High Definition Audio Controller)
    *-Audio Codec*
    (Conexant Systems 5051h)
    *-Audio Device*
    (AMD (ATI) RV635 Audio device [Radeon HD 3600 Series]
    Now, as I write this I have heard rumor that the A305D uses the same
    audio/graphics drivers.... well.... off to try something I guess...
    if there is any help or ideas I would appreciate it.

    Thanks Jaba
    Initially I attempted to locate the MS patches you mentioned, KB835221 and KB888111 respectively, alas there were none available that I could find for XP64, also at the time of tapping this message theres no XPSP3 for XP64 bit either.
    Lucky for me I logged into my MSDN account and downloaded XP+XPSP3 tore the house up looking for a CDR... anyway long story short.... solved all the problems with the required updates of SP3, I now have my Toshiba A300D-15B all singing 'n dancing laptop setup completely with XP32.
    Had to take a hit on the RAM though, gonnna have to go on with only 3.2GB instead of 4GB,
    arguably when one counts the memory foot-print that vista ultimate 64 had used I am probalby still on a winner here in memory avaiable terms LOL!
    thanks again! much help!

  • Problems with downgrade from Win 8.1 to Win 7 64bit on Satellite S70-A-11H

    Hi,
    My daughter already has a Tosh laptop with Win 7 64bit which is several years old and has seen better days, so for Christmas I bought her a new S70-A-11H notebook with Win 8.1 pre-installed.
    She hates it. In fact she will not use the new laptop at all unless it has Win 7 on it.
    For people that do not use a tablet or a Windows phone and like a desktop feeling machine Windows 8 does not work for us.
    Now I work in a niche IT role using numerous OS such as Microsoft Windows (XP, Win7, Server 2003, Server 2008) and Solaris as well as a bit of RedHat.
    Now my Win8 experience is zero.
    I thought it would be simple enough to install a retail copy of Win7 with SP1 64bit onto this notebook.
    Not so easy as it turns out.
    When I boot from the Win 7 install DVD the installer program locks up as the Win 7 logo starts to appear on the screen. If I try an install in safe mode the last driver that appears to load when the lock up occurs is disk.sys.
    So the question is how can I install Win 7 64bit SP1 onto this notebook using a retail copy of Win7?
    Any ideas would be much appreciated.

    *I found the reason for this problem* and the solution outside of this forum.
    If anyone else is interested _the issue is cause by the use of GPT partions on the 8.1 build._
    To overcome this and install a fresh copy of Win7 you can do this:
    -Shut down Windows 8 while pressing the Shift key to completely power off.
    -Power on and press F2 while the Toshiba logo is displayed to enter the UEFI Setup Menu.
    -Go to the Security tab and set the "Secure Boot" setting to "Disabled".
    -Go to the Advanced tab, enter "System Configuration" and set the Boot Mode to "CSM Boot."
    -Press F10 to save and exit.
    Go to http://gparted.sourceforge.net/ and download gparted boot image. Make bootable gparted cd and use it to delete the GPT partitions on the HDD.
    Now just install Win7 64bit as you normally would creating whatever partitions you like during the install process. Of course you must have a new licence key for Win7 for this to work.
    To finish off you will need to download all the required drivers from the Toshiba website to suit Win7 64bit. This is quite tedious as some of the files are huge. I got just the basics that I thought I'd need and that ended up being over 1Gb of files.
    I'm so pleased I managed to get rid of that nasty Win8 interface.
    This is probably not the only way to do this, but this worked for me.

  • I need driver bluetooth for win 7 64bit who can help me ?

    I need driver bluetooth for win 7 64bit who can help me ?

    Does this solve your problem?
    http://windowsforum.com/threads/make-your-bluetooth-devices-work-on-windows-7.24 580/

  • Satellite A100-768 - need video card driver for Win 8

    Hi everybody,
    I cannot find any driver suitable for my Satellite A100-768 where I just installed Win8, my graphic card should be Ati x1400 but nothing work even with Ati and/or toshiba drivers.
    Please help me!

    Hi
    The old Satellite A100-768 isnt Win 8 supported notebook model.
    The notebook was equipped with an ATI X1600 (code: M54P 128MB DDR RAM)graphic chip.
    I dont think that ATI has developed an Win 8 compatible driver for this old graphic chip.
    In my opinion you can use only an standard graphic driver which is part of Win 8 system

  • Satellite A300 Win XP 64bit drivers requested

    Hello people,
    I am trying to figure out if Toshiba has drivers for win xp 64 bit.There are drivers for xp but there isn't a discrimination like in Vista where you can get 32 or 64 bit drivers from the drop-down list.
    Thanx for your answer in advance :)

    Hi
    Win XP 64bit drivers do not exist on the Toshiba pages
    I doubt you will find it on any of Toshiba page you will need to search on 3rd party pages but this will be a hard venture because the Win XP 64bit was not so popular like 32bit OS.
    But since the 4GB RAM issue which is related to 32bit OS limitation many people try the Win XP 64bit. But most manufactures dont develop the Win XP 64bit drivers in this time Win 7 is the future and king. You know.

Maybe you are looking for

  • Error in BDC session processing

    hi all, I am running the BDC session method. while running the session the interface throws warning message. If it gives more than one warning message in background the session goes into error. is there any way to skip these and still continue the pr

  • Sizing a Scene7 flash component

    Does anyone know how to size a flash component? I am using the BasicZoom and Flash Flyout Zoom. Both seem to have a ton of unnecessary whitespace around them. I've seen smaller examples, but I haven't been able to figure out how to size them as cq:in

  • Manage ACL's for different versions...

    Hi We have several sites, some with BM39SP2 and some with older versions. Some sites have multiple BM servers, so Access Rules are managed via the container object. The issue we now have is inability to manage the older BM access rules... Management

  • Urgeent:  Web Service Invokation Error form BPM studi

    Hi I'm using BPM Studio 10.3. I have a Web service and i want to call it form my process. But whenever I invoke it a problem occures. I can invoke it from my code out of studio. The complete exception message is: fuego.lang.ComponentExecutionExceptio

  • Folders marked for privacy in spotlight viewable in guest account

    Say I select the Spotlight preference pane and add a couple of folders that I want to be excluded from searches. Now I log out and then log in again as a guest account user. I launch System Preferences and select Spotlight, and there I see all the fo