Satellite A505-S69803 - How to replace the Wlan card?

Before I go into the details of my problem.
I have rolled out a DSL product, set up hundreds of wireless routers. I was a notebook service tech for 3 years for laptops as well.
I picked up a toshiba cause the price is right, and so far I am learning you get what you pay for.
This machine has a realtek wireless card.
As everyone knows.. Realtek == cheaply made bad hardware.
Toshiba refuses to replace this card.
I need to buy a new card for this laptop.
I need to know if this is a mini-pci, half height mini-pci, a pci-e, or mini-pci-e card.
I plan on getting an intel for it.
I also need the whitepapers so I can remove the wrist pad / bezel on this unit. They have users guides, but unlike other notebook manufacturers, do not have their service manuals available.
Any assistance to get this laptop fixed would be appreciated. It is leaving town with my parents soon.

hi vlad2,
realtek is also known to run perfekt under linux - this indicates that the hardware isnt so bad as you think...
toshiba sells the unit as specified - if you wanna have some other hardware choose another notebook modell or replace the wlan by yourself...
if unsure what card is in it , open the door under which the card is located - for an notebook tech pro like you no big thing - and check it.
replacing this piece should be easy...
to answer your complaint: +"Toshiba refuses to replace this card."+
sure this! if it works there is no need to replace and you will get allways the same as spare because this modell comes with it...
i dont like it to repeat me but a notebook technician should be able to disassemble this machine (you will ruin your warranty with this action)
disassembling the covers is a service partner thing - not for customers...
by the way: +"I am learning you get what you pay for"+ means what you see is what you get, spending some extra money is not bad at all...
you cant get a mercedes for the price of a little car...
and whats your technical problem with the wlan?

Similar Messages

  • Can i replace the WLan card on my Satellite Pro P750

    I purchased my P750 to run wirelessly on our 5GHz (802.11a/n) frequency network.
    Though I was informed it would work it does not. It appears that my hardware does not work on the "a" band.
    My question is can the card be reaplaced or is it built into the board. If it is in built can an extermal wireless card be purchased to do the job?
    Just in case you asked I have read the forums updated the drivers and enabled the "n" on the AdHoc advanced profile for my Atheros AR9002WB-1NG

    Hi
    The Wlan card is connected to the miniPCI port on the motherboard and its possible to remove/disconnect the card.
    But there could be still an compatibility issues between new device (Wlan chip) and the BIOS.
    I read here in the forum that someone has replaced the Wlan card and finally the notebook didnt boot up due to the compatibility problems between the Wlan and BIOS.
    So in your case I recommend using an external Wlan solution.
    The WLan stick is easy in use and should be compatible with most systems.

  • Why can't we replace the WLAN card on Satellite L670?

    Hi,
    I'm using a Sattelite L670-143 PSK3EE which comes with a default Atheros AR9285 wireless network adapter.
    I've tried replacing this one with the 5Ghz Intel Centrino Advanced-N 6230, which has a 2pin connection too.
    Unfortunatelly, the card is being properly recognised by Windows7 but for some reason it has no signal.
    Running inSSIDer, there is no single surrounding device found, while even my own router is advertising at the 5GHz band, and the taskbar icon tells me the Intel is the Wifi network but it always states that Wifi is switched off.
    Trying to turn on/off thhe wireless network by using the special FN+F8 key combination, I am unable to switch it on.
    Please has anyone succesfully installed a third party network adapter in a Sattelite ? Is Toshiba blocking any but the default wireless adapters ? and/or how can we make them to operate next to only being properly detected by Windows but unable to switch the signal on ?
    Thank you for any help.

    ok, i hope you know how yo get to your wifi card inside your laptop, i try to explain as best as possible to show which pin in your new wifi card has to be taped off, so it cannot get signal (Hardware Radio Off) from the bios.
    Pin layout can be different for other wifi cards, so i can only show the pin the tape off for this specific card.
    My laptop = Satellite L670-140 (in this model the wifi card is underneath the keyboard, follow steps 5,6,7 from this site to unscrew it.
    Wifi Card used = Intel Centrino Advanced-N 6230 (2pin antenna like the default Atheros one)
    * Before replacing, make sure laptop is properly shut off, disconnected from mains, and battery removed.
    * Also make sure you have your proper driver for your card downloaded beforehand, since you most probably will need it before being able to connect to the internet.
    * Also, write down the new card's MAC address. (most probably you'll find it on a little sticker on the wifi card)
    Here are 2 screenshots showing which pin to tape off for disallowing the BIOS from Hardware Blocking the radio signal.
    Front & Back of the wifi card : http://i.imgur.com/96D5q.jpg
    Screenshot show which pin to tape off : http://imgur.com/TZiQv
    So, as you position your wifi as seen on the last screenshot, it's the 2nd pin from the right, on the largest pin row.
    make sure only this specific pin is taped off, and no others, and make sure the tape strip does not come loose once you put the new wifi inside its slot.
    - After replacing, it's only a matter of starting up, letting the new card get properly recognized by windows.
    - I installed the wifi driver from Intel just in case, don't know if it's actually needed, most probably Windows will install all you need by default once the card is being detected.
    - After that, i had to power down the laptop, switch off the router for 1 minute, switch back on router & switch on laptop. (doing the correct software steps to set up an internet connection with the card may be needed.)
    If your router is configured to only allow specific MAC addresses from connecting, then simply configure your router to allow this card's mac address.
    BTW: If your laptop has a "software way" of switching ON/OFF the radio signal ( FN+F8 keycombination in my case), you can still switch ON/OFF the card as you which, as long as the card does not get "Hardware Blocked" which should be corrected if you properly taped of the pin shown.
    I'm sorry if i'm not sounding that clear, i'll try helping as best as i know/can.

  • Satellite A505-S69803 won't boot up

    Was using computer, left it up and running came back after an hour and it appeared to be in sleep mode.  Could not wake it up.  Finally shut it off and now appears not to reboot.  The power lights all come on and the fan runs but nothing else happens.  The screen remains black and no start up noise is heard.  Have tried taking out the battery and reinserting with no success.  Called for technical support and they want to charge me several hundred dollars to ship it back to them to look at it even though it is only 6 months old and still under warranty.

    model number PSAT0U-01F001
    I have a Satellite A505-S69803 with Windows 7 Home Premium OA that I bought at Best Buy in December of 2009. Until yesterday, I had not had one problem with it.
    Went to turn it on last night and had no luck - it seems dead. I thought it might be a power cord or battery issue, so I removed the battery & tried it just on AC power - no luck. Tried it with just the battery - no luck. No lights, no sounds - nothing.
    Took it to best buy today. Their "geek" said he thought the power supply was bad. We bought a new one; he tried that, same thing - dead. We returned the new power supply.
    I've used this laptop every day for 17 months and have not had a single issue, so this is perplexing. Don't know if this will help, but here's how I used the computer leading up to the issue last night:
    1. Used it outside, on battery power, for a few hours in the morning.
    2. Took it inside, plugged it in, and used it for a few hours in the afternoon.
    3. Closed the screen (puts it in Standby mode), unplugged it, took it upstairs.
    4. Plugged it in, opened the screen.
    5. Noticed Standby light was not on - no lights at all.
    6. Pressed the power button to bring it out of Standby - nothing.

  • How to replace the root tag in ABAP Mapping

    how to replace the root tag with the certain string in ABAP Mapping
    just like
    <?xml version="1.0" encoding="UTF-8"?>
    <root>
         <name>Lawrence</name>
    </root>
    into
    <?xml version="1.0" encoding="UTF-8"?>
    <myRootElement>
         <name>Lawrence</name>
    </myRootElement>
    i don't want to implement it in message mapping
    please give me the sample code
    thanks in advance

    Use below code
    odocument = ixmlfactory->create_document( ).
    msgtype = odocument->create_simple_element(
    name = 'myRootElement'
    parent = odocument ).
    Thanks
    Praveen

  • Qosmio G50-10J: How to replace the Optical Disc Drive (ODD)?

    Hello there,
    the optical drive of my Qosmio G 50 is not working properly anymore, it reads only some movie-DVDs, but sadly no videogameDVDs at all, so I cannot instal any games.
    The warranty has already expired too. So I wanted to ask if it is possible to change the drive myself, if it is then how should I do it, and if by doing it would the laptop be in
    serious risk of getting damaged?
    I would be very thankful for every tip and every help you guys can give me!!!
    Best regards,
    a.z.

    Hi
    In different cases the ODD replacement is not very tricky.
    If you want you can check this forum category.
    Here you can find some videos how to replace the ODD on different notebook models:
    http://forums.computers.toshiba-europe.com/forums/forum.jspa?forumID=115
    Here is also a nice Youtube channel which provides the instructions how to replace the ODD:
    http://www.youtube.com/user/toshibaeuropesupport
    But maybe the ODD laser lens is dirty. In my case I could solve similar issue cleaning the laser lens using a cotton-wool tip and alcohol.
    But be careful doing this!

  • Satallite A100: How to replace the keycaps?

    Is there a manual on how to replace the keycaps after they come off?
    My Satallite A100, one year old, lost two keycaps a few weeks ago, and I am unable to replace them, although I have all the (little) parts. It got even worse when some more came loose recently when my little son peeled some off, using the room created by the already missing keycaps.
    Thanks!

    Hello Mike
    Reading your posting I can not understand exactly what is wrong with your keyboard but removing and putting in place keycaps (plastic with written symbol) is not problematic. You must just put it right in place and gently press it down. You will hear click and the keycap will be in the place again.
    Under this keycap is placed small plastic mechanism. It contains two small plastic parts. If they are removed from the bottom you can put them inside again. To see how it looks like remove keycap from any other key and see how is it placed.
    I have done the same now and with a little bit patience you can put it in the right position again.

  • HT4528 how do you replace the sim card on an iPhone 4?

    how do you replace the sim card on an iPhone 4?

    Click Support at the top of this page, then click Manuals

  • How to replace the certificate of Cisco 2106 wireless LAN controller for CAPWAP ?

    I have interested in CAPWAP feature and I download the open capwap project to make Access Controller (AC) and Wireless Terminal Point (WTP). I had built the AC which used PC and WTP which used Atheros AP. The CAPWAP feature work well when I enabled the CAPWAP that used my own AC  and WTP. When I got the Cisco 2106 wireless LAN controller (Cisco WLC), I configured the Cisco WLC to instead my own AC but I got the authorize fail in Cisco WLC side. It seem the Cisco WLC could not recognize the CAPWAP message which sent form my own WTP. I think this issue just need to synchronize the certificate between Cisco WLC and WTP.So I need to replace the Cisco WLC's certificate manually. Does anyone know how to replace the certificate manually with Cisco WLC ?
    Best Regards,
    Alan

    Unfortunately this Support Community is for Cisco Small Business & Small Business Pro product offerings.  The WLC2106 is a traditional Cisco product.  You can find this type of support on the Cisco NetPro Forum for all traditional Cisco products.
    Best Regards,
    Glenn

  • Satellite L20-153 can't get the WLAN to work

    Hi everyone,
    I have a problem with my wifes laptop that I havent been able 2 solve.
    Her windows crashed and wouldnt start the marker in "DOS" just keept blinking and nothing happend I tried to restore to latest previous working windows , but that didnt help nor did the failsafe mode. So I took out the recovery CD/DVD and tried make a fresh installation the install setup worked fine until it asked me 2 take out the disc and restart the comp which I did.
    When it rebooted the same problem appeared (blinking marker and nothing happens).
    So what I did was I took out a normal windowes XP (SP2) and reinstalled eveverything ( I formated the drive also) and rebooted and it worked.
    So then 2 my next challenge was 2 get all the hardware working all I got all working but the WLAN (built-in).
    After I had installed everyting I saw my wireless network but next time I started the comp it was gone along with all other WLAN that I use to be albe 2 see. and when I refreash its still empty.
    I have tried to inactivate it and then activate it again but it doenst help.
    I also tried once more to use the Toshiba recevory disc but got the same problem.
    So now Im back with my own windows Xp installed on it but I cant get the WLAN to work.
    There isnt any hardware conflics.
    So now I need your help on how 2 proceed.
    tanks alot.
    Regards,
    Quickhat

    Hello
    About WLAN there is actually no philosophy and few things are important:
    The WLAN card must be installed properly (properly listed in device manager) and
    It must be also enabled. At first with WLAN switch (WLAN LED is ON) and then enable it using FN+F8 key combination.
    After doing this WLAN card should see all available WLANs. To connect one of them is another theme.
    To be honest I didnt understand what happen exactly. If I understand you right your notebook can see WLANs but after restart all available WLANs are not visible anymore. Am I right about that?
    Have you tried to restart your WLAN router and scan the WLAN area again?

  • Re: Satellite A300 - Can I replace the graphic card?

    Can I replace the graphic card with a better one in Satellite A300-14S (PSAJOE)?

    Hello,
    As you can read in 100 other threads here in forum its not possible to repalce teh graphic card because its fixed on mainboard.
    [Is it possible to upgrade the CPU or GPU of a Toshiba notebook? |http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=13]
    Here is more interesting information:

  • Satellite T110-11U - Can't find the WLAN router

    Hi,
    I have a Toshiba Satellite T110-11U. Have had it since Feb and loved it - happily used it wireless throughout the house. Then one day about a month ago unless I was in the same room as the wireless router, wireless doesn't work. I have 2 other laptops (and an iPhone) that still connect wirelessly throughout the house and the garden without problem.
    As you can imagine, this was very strange. When I take it out in to the garden, my other laptops find all the wireless networks in the area, but my Toshiba finds none.
    Suspecting it was a driver issue, I made sure the wireless drivers were up to date. With no joy there, I recovered the system to as it was when purchased (doing a full restore by interupting the booting up and letting the hard disk be wiped and reinstalled etc). Still the same problem. I've even changed the rooms the router is in, and the same problem - the Toshiba can't find the router unless the router is within a couple of metres of the laptop.
    Before I lose the will to live, can someone suggest the cause of my problems, or is it time I admitted defeat and took it back to comet under warranty (where the will probably test it next to a wireless router and tell me all is fine!).
    Many thanks,
    Steve.

    >the Toshiba can't find the router unless the router is within a couple of metres of the laptop
    Does this mean that the T110 can find the wlan but only if its placed near the router?
    Just other hint;
    Go to BIOS and set it to default! Ensure hat Wlan is enabled and dont forget to save the changes.
    You should also go to control panel -> device manager -> Wlan card properties -> Advanced tab.
    Should check the Wlan settings like the Wlan encryption, Wlan channel, etc
    Be sure you have enabled the WLan card on your notebook as well!

  • How to replace the char values into numeric in my string?

    Hi Friends,
    I would like to Replace the Charecter values with numeric value in my string.
    Exp : first in my string I am having the value like this : 'ABCD1234' ( may be any char and num values ), and I want too get it by '99991234'.
    I mean How to replace the char values into numeric in my string?
    Thanks,
    Sridhar

    Hi Sridhar,
    I would like to Replace the Charecter values with numeric value in my string.
    Exp : first in my string I am having the value like this : 'ABCD1234' ( may be any char and num values ), and I want too get it by '99991234'.
    So, if i understand you correctly, you want to replace all characters in a string with 9 as in the above example, irrespective of position of the character, if so try with the below code.
    DATA: l_str TYPE string.
    l_str = 'ASKHSIUDNSBDKJSDH124312431243124saasdfsf'.
    REPLACE ALL OCCURRENCES OF REGEX '\D' IN l_str WITH '9'.
    IF sy-subrc EQ 0.
      WRITE: l_str. "Result will be 9999999999999999912431243124312499999999
    ENDIF.
    Regards,
    Chen
    Edited by: Chen K V on Jun 13, 2011 12:36 PM

  • Hp 7 voice tab screen broken unfortunately. tab is under warrenty.. how to replace the screen

    hp 7 voice tab screen broken unfortunately. tab is under warrenty.. how to replace the screen 

    Hp india have bad service ever. I hv order three notebooks ' hp 15-ac026tx' before five days for firm. Distributior open the boxes. But at the time of installation not single driver supporting to 2gb graphics card. As distributor made with Hp support they replied the engineer will come to ur place soon. But still no one has come. And im going to cancel this order and will prefer other compony.

  • Satellite L300D - Determine the WLAN card

    I need help determine what wireless card to get for this L300D 11V PSLC0E-00900DEN laptop.
    I have looked on this web site for laptop but do not exist. Model name is different to the one on this site. I assumed this laptop came with wireless built in because it had the sticker on it. Bought just before Christmas for my little brother from pc world.
    I cant make out whoever its card bus or express card slot or pc card slot.
    Any help would be grateful

    This Satellite L300D laptop has a Realtek RTL8187B WLAN card.
    The laptop is listed on the Toshiba driver download page and the Realtek driver too. I found exact your model.
    http://eu.computers.toshiba-europe.com
    The slot on the side is an express card slot.

Maybe you are looking for

  • Site doesn't work in IE, need help...

    Heya, So if you visit http://www.spencerhill.us in Safari or FireFox on a mac you click any of the three images on the right and up pops a handi lightbox script using java. Normally this works without a hitch in IE but I have made a lot of modificati

  • How to load sets from R3 to BW

    In R3, we have many report painter reports which were written using various account sets and cost center sets, etc.   These sets were created in t-code GS01, and they can contain one single node or multiple nodes.   We are activating various BW cubes

  • My nokia Lumnia 1020 camera stopped working

    what can i do ;  it is so annoying since the main feature of this mobile phone is the camera:

  • Error while installing: Error creating folder. 1008:9,-61

    Installing specialized software for highschool yearbook. any help with troubleshooting would be awesome. -Superd@ve

  • Kind of strange need with UNION

    Hello, There are 2 tables located on 2 different dbs but the tables structure are the same. I perform: Select name, version, status, price, input date from product@DB1 UNION Select name, version, status, price, input date from product@DB2 BUT if (nam