Satellite A505D-S6958 why windows booting slow when installed new windows updates

Good day,
My laptop boots slow than usual after installing windows update why is it so? i restored it to previous setting then it boots a little faster.

Satellite A505D-S6958 
The way to handle this is to install each update - on at a time - and check the boot each time.
Once you identify the culprit, we can proceed.
Microsoft offers free support for troubles with Windows updates, but we must need to know which one.
-Jerry

Similar Messages

  • Have Windows OEM Product Key -but key is not accepted when Installing New Windows 8.1 Disk

    I was able to secure the Product Key for what I thought was a Windows 8.1 OS on my Toshiba notebook.  I believe my notebook ORIGINALLY had an OEM version of 8.0 (was pre-loaded when I bought the notebook) but at some point I updated the OS to 8.1.  I
    was able to verify that I was currently using 8.1 via the Bios set-up utility.  After securing the product key, I contacted Microsoft and they agreed to send me 32 and 64 bit versions of Window 8.1 free of charge (so as long as I covered the shipping.)
    When I went to install the  8.1 disk, I received a message stating that the product key didn't work.  I can't help but wonder IF perhaps because my PC originally came with 8.0 that it's product key won't work with 8.1?  When Microsoft asked
    WHICH version I had on my PC, I had advised that I was using 8.1. They never asked what was the ORIGINAL OS?
    Any ideas?

    thanks for replies.  I suppose it would be helpful for me to explain why I needed the product key and the new Microsoft Windows 8.1 discs in the first place.  This was never a matter of merely trying to activate the OS.  Last week- my
    notebook went in to standby mode- a very normal process when I would step away from the notebook for a decent amount of time.  When I tried touched the power button to release it from stand by, I received a message that the OS was not able to start up
    due to TWO (very specific) files that were either missing or had been corrupted.  The message recommended re-installing the OS in order to re-insalll or otherwise correct the file errors.  I spent a good 3-4 hours researching this on a number of
    Microsoft/ IT sites, and it appeared this was a very common error -stemming from "boot disk error" -or "errors with hard drive/ partitions".  I then began my trek to a) locate the product key (of which I was able to secure from the BIOS) and b) have Microsoft
    send me the Windows 8.1 discs.  Hope this helps and thanks again.

  • Why won't my MacBook install new software updates?

    When I click on Software Update it says "Install 11 items." Among them are iTunes 10.6.3, Safari, Garage Band Update, iPhoto Update and so on.
    When I click "Install 11 Items" it doesn't install anything. It says I must restart my computer to finish installation. So, I restart. Afterwards it asks for my password, I figure for installations.
    But nothing is changed, and when I click updates I get the same 11 program updates. This has happened at least seven times in the past seven tries.
    Plus, my battery is stuck. It won't come out of the computer. Though the abve issue is most troubling.
    Thanks.

    Mac OS X 10.7 (Lion) is a purchased product, you can get it from the Mac app store. If your MacBook can support it though you may want to wait and purchase Mac OS X 10.8 (Mountain Lion) which will become available sometime later this month. It will also be a purchase, but it is not necessary to get Lion first, and it is going to be $20 rather than the $30 for Lion. You can find out if your MacBook will run it on this page.
    That security update can be found here. The Java update is available here. You can search for other updates on this page.
    I don't know why the installer is not performing as it should. It is highly unlikely that the battery has anything to do with your installation issues.
    Best of luck.

  • System error when installing new itunes update

    Cannot install latest itunes update...?

    thats a bit confusing, it's a red message but it says warning
    I tried the other programm mentioned above but still I get the same warning.
    in the report it's clear that the font installed is not used in the output on the screen. I can add the font in my sapscript but the output is not the font specified.
    the font installed is Lucida sans EF which is part of the 'company' style but till now not yet implemented in SAP.
    oops it's working now, new learning moment for me. never look at preview on screen for the kind of font you want to see , thanks for the input and confirmation of the procedure
    Message was edited by:
            A. de Smidt

  • Why is HP SimplePass on my new windows 8.1 machine, when I do not have a finger or card reader?

    Why is HP SimplePass on my new windows 8.1 machine, when I do not have a finger print or card reader?
    It keeps popping up and asking me to use it?
    Can it be used to keep my passwords?
    What Version of SimplePass are you using?   Unknown, apparently you have to use it to find the version number.
    What is your Operating System? Windows 7 32 or 64bit? or?   Windows 8.1  64 Bit
    Which browser are you using?  Internet explorer version 11, and Fire fox version 34.0
    Can you give me a example of a Website that is giving you this problem?  Have not used it yet.
    Is is every webcard or just one or two websites that have this problem?  Have not used it yet
    What is your computer product number? (NOT serial number?)  HP 15-f039wm Notebook PC
    Thanks for any help you can offer.

    Hi,
    You could check the blog below.
    How to Enable Group Policy Debugging on Windows 7 / 8 Clients
    http://clintboessen.blogspot.jp/2014/01/how-to-enable-group-policy-debugging-on.html
    Note: Microsoft provides third-party contact information to help you find technical support. This contact
    information may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.
    If you have any questions about Group Policy, you could get better support from Group Policy forum.
    http://social.technet.microsoft.com/Forums/windowsserver/en-US/home?forum=winserverGP
    Best Regards,
    Joyce
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Crypto failure when upgrading Windows 8.1 Pro install to Windows 10 Tech Preview 10041

    Has anybody experienced the following error when trying to upgrade a Windows 8.1 Pro install to Windows 10 Tech Preview 10041
    crypto_self_test_failed
    The system reboots twice both times with the same error and then reverts back to Windows 8.1 Pro.  This occurs during the upgrade process.  Windows 10 never installs.
    Thoughts?  Suggestions?
        Thanks
          Eric Sten

    Hi Eric,
    It seems to be the upgrade self-test fails.
    For testing Windows 10, you may consider take use of Hyper-V and install a VM of Windows 10:
    Step-By-Step: Creating and Running A Windows 10 VM on Windows 8.1
    Or try a dual boot:
    How to Dual Boot Between Windows 7 (or Windows 8.1) and Windows 10 Technical
    Preview (VHDX)
    Best regards
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • Very slow to open new window

    How to fix very slow opening window. I have vista 64. Since the last foxfire update it is very slow to open new windows. It can take some windows opening over a minute to open. (yes minutes not seconds)
    Once a window is open I can open in new tab with no problem, but not with new window. (I like to have many windows open at a time)
    When l click to open a new window either from a link or new window, it seems that nothing is happening. Then clicking to open another one which seems to open faster. Then all of a sudden the first window decides to open after about a minute or so. Sometime it seems to hang longer than other times.

    I did try the safe mode and didn't work. I did make iexplorer my default and then back again to foxfire and it somewhat worked. It was work not bad (but not as good as before) until I rebooted and it seemed the more I used it the better it became. Go figure :)
    Well I just did another firefox update to 4 and it works perfect and maybe even better than before. (or I got use to how slow it was :) )
    Thank You for you quick reply and I'm very happy for the new update... So far so good.

  • Fading background when opening new window

    Fading background when opening new window. I would like to do a "lightbox" effect that on mouseclick opens a new window over the top of the other windows(s) that has a close button to take the user back to the previous page. I have viewed this in the past, but now cannot find examples. If you have URLS of examples, or better yet, code to make this happen, that would be helpful. Thoughts and opinions on why I shouldn't use this effect are also welcome!

    If you need a lightbox effect, use one the freely available "lightbox" or modal window scripts.
    Fancy Box is well documented and works with images, text, iframes, Google Maps, media, etc..
    http://fancybox.net/
    Nancy O.
    Alt-Web Design & Publishing
    Web | Graphics | Print | Media  Specialists 
    http://alt-web.com/
    http://twitter.com/altweb

  • How can I disable the event sound played when a new window is opened?

    When Firefox starts, or when a new window is opened there is an annoying click.
    How can I disable this?
    The only way I have been able to stop it is by disabling all event sounds from the control panel but I'd rather just disable this particular sound.

    No, it's Windows XP. Hmmm, I don't know! I only started noticing it recently and as far as I remember, the only new add on is NoScript. I found the event that was being triggered (Start Connection) and disabled the sound in Windows. So the problem is solved in that I don't have the annoying sound ... but don't know why it started and hope nothing sinister is going on.

  • I'm running iTunes 11.0.5.6 on Windows 8.  When I try to update to iTunes 11.1.0, I receive error messages that refer to a "network resource that is unavailable" and that "the older versionof iTunes cannot be removed."  What do I need to do?

    I'm running iTunes 11.0.5.6 on Windows 8.  When I try to update to iTunes 11.1.0, I receive error messages that refer to a "network resource that is unavailable" and that "the older versionof iTunes cannot be removed."  What do I need to do?

    Perhaps this can be of help:
    http://support.apple.com/kb/TS3704
    It fixed the problem for this DukeHutchens in this thread:
    https://discussions.apple.com/thread/3916663?start=0&tstart=0

  • When opening a new window, any clicks within the new window click through to the original window so you can't scroll or save from the new window.

    Anytime that a new window is opened (such as when sending an email message or opening a pdf) I am unable to click on the new window. I can't click send or click on the scroll bars of the new window. If I attempt to click on the window it clicks on whatever is behind the window instead. If the new window opens with a cursor within it then I am able to type or scroll through with keyboard arrows, but cannot click or use the mouse scroll buttons. I also cannot choose items from drop down menus with the mouse (even in the original window). I must use the keyboard arrows to select any menu options.

    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

  • Moving tabs from one window to another makes the new window vanish. I have hot corners enabled so when I move up to the right corner of my display I can see all my open windows but when I click on the tab that I moved to make it its own window it vanishes

    Moving tabs from one window to another makes the new window vanish. I have hot corners enabled so when I move up to the right corner of my display I can see all my open windows but when I click on the tab that I moved to make it its own window it vanishes

    I came up with an alternative solution.
    Instead of actually trying to move the JInternalFrame from one JDesktopPane to another, I added a single, maximized JInternalFrame to the left side. When one of the right side frames is to be docked, I merely copy its ContentPane to the single JInternalFrame on the left, set the original to be non-visible, and adjust the properties of the JSplitPane to make the "docked" frame appear.
    When the "close" button on the docked frame is pressed, I simply undo this procedure to "undock" the frame and redisplay it on the right-hand side (with its content intact from the docked frame, but in its original position).

  • HT203175 Running Windows 7 64, when installing, I get the error, 'itunes encountered an error and could not configure'.  Ideas?

    Running Windows 7 64, when installing, I get the error, 'itunes encountered an error and could not configure'.  Ideas?

    iTunes unknown error 13010

  • When I open a new window, the current window is closed. I would like to keep the current window and open the new window without losing my current window. I checked "Open new window in a new tab instead" under tabs

    When I open a new window, the current window is closed. I would like to keep the current window and open the new window without losing my current window. I checked "Open new window in a new tab instead" under tabs
    == This happened ==
    Every time Firefox opened
    == Noticed yesterday, June27, 2010

    i just went into preferences, deleted what was in the home page, and entered a new home page address which solved the problem, 

  • Known Issue: Fatal error when installing the Windows emulators: 2147023293 (Windows 10 Insider Preview SDK and tools, April 2015 release)

    When installing the Windows 10 emulators, you may receive the following error:
    Error: Emulators for Windows Mobile 10.0.10069 : The installer failed. Fatal error during installation. Error code: -2147023293

    To resolve this issue, run Visual Studio setup again to add the emulators. To do this
    Reboot your computer
    Open Control Panel, and select Programs and Features. 
    Select Microsoft Visual Studio 2015 RC, click Change, and then click
    Modify.
    Select the feature “Emulators for Windows 10 Mobile”, and click Update.

Maybe you are looking for

  • Procure To Pay documens with updated tables

    Hi Plz send any one have documents for Procure To Pay with which tables afftected in each transaction. Thank's

  • Jarsigner Error : Keystore Load

    I am trying to sign my .jar files using the code as given below but it gives me error - Jarsigner error : java.runtime.exception keystore : Load "c:\xyz\.store" <The system cannot find the file specified> The code i am using to sign my jar files is j

  • Will Photoshop photos open in PSE 6?

    The photos I have on my iMac G5 10.4.11 which carry the label jpeg will open in Preview. The photos that are labeled Adobe Photoshop jpeg will NOT open in Preview or anywhere else. When I try to open any of these photos, Photoshop CS2 Version 9 tries

  • 0figl_4 datasource will serve to 0figl_c10 cube?

    Hello Gurus, 0figl_4 datasource will serve to 0figl_c10 cube thanks Arun

  • Re-install with new version

    Hey, I have a question, hope anyone can help. I have to re-install my MacBook Pro with the install DVD, Mac OS version 10.6. Only... I'm on the other side of the world and don't have access to my install DVD. A man travelling with me do have the Inst