Satellite A60-102 - Blue screen error appears on screen and system restart

Sometime Blue screen error showing on screen and system restart
how can solve this problem

Hi
What BSOD code you get exactly?
Which OS you are using?
Maybe its a driver problem. Have you checked the device manager for yellow exclamation marks?
Can you boot in safe mode?

Similar Messages

  • Satellite A60-102: error with a autodesk autocad 2006

    Hi all;
    I have installed the autodesk autocad 2006 on my laptop satellite SA60-102 but it didn't run and it shows an error saying "DBX CAS 0" only with "ok", although I installed it on my desktop pc and it worked very well.
    I need your help as soon as possible
    Naim Kobaissy

    Hi,
    I hope you becomes Informations with you auto Cad Problem DBX CAS 0 under http://www.cadchat.com/forums/lofiversion/index.php/t2443.html.
    If this not so, see you under the Address.
    http://discussion.autodesk.com/thread.jspa?threadID=363501
    By

  • Blue Screen Error while login screen in My Compaq CQ40 133TU

    Mate , 
    I cant login my system. when i swtich on my sytem till login screen it ll coming , but after that showing blue screen error wth this error code 
    *** stop : 0x0000008E   (0xc0000005, 0x0044005C, 0x92000908, 0x00000000)
    What to do ? Please give a solution
    Product : Compaq Presario CQ40
    S/n :[Personal Information Removed]
    P/N : FW554PA#ACJ
    os : wINDOWS 7

    Hi
    Please find the link given below might help you to resolve your issue.
    http://support.microsoft.com/kb/315335
    http://support.microsoft.com/kb/827663
    Let us know how it goes!
    "I work for HP."
    ****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    Regards
    Manjunath

  • Satellite A60-102 - How much HDD is possible

    How much harddrive capacity used in this Laptop

    Hi
    The Satellite A60 is a little bit older series and I think the notebook supports the IDE HDD controller
    Possibly the HDD controller would supports only 28bit LBA and this means that only 128GB would be recognized by BIOS.
    I think a 120GB HDD should work but Im not quite sure if bigger HDDs would be supported due to mentioned 28bit LBA
    Greets

  • Iphone 5 cracked screen but worked fine for 7 months that have owned it, blue lines started appearing, now screen is black, but can still hear notifications HELP!!!

    My iphone 5 was given to me by my sister in january, had a cracked screen, but has worked perfectly in the time i have owned it, recently it begain to have blue lines appear on the screen, but was still working, now screen is black and cant see anything, i know its on as i can hear all notifactions (messages, calls, emails etc) help please, whats wrong! can i still claim apple support, as i dont have warrenty papers?

    There are no warranty papers, never have been for iPhones.
    Take the device to Apple, an Out of Warranty replacement is $229.
    Warranty does not and has never covered damage.  The device has suffered damage (cracked screen).

  • Blue Screen Errors on HP's And Some Dells

    Microsoft recently released an official update that seems to cause some HP's to "bluescreen" on startup. The Dell update seems to be for the webcam
    There's a VERY simple fix for this.
    HP's
    Restart your computer(press and hold the power button for 5-10 seconds if you need to turn if off from the bluescreen)
    While it is turning on tap the F8 key once a second until a text menu comes up
    Arrow key down to Safe Mode with networking and press Enter
    Windows will load, a bunch of files will scroll past, this is normal
    After Windows loads, click Start > Accessories > System Restore
    When the window pops up(it will take a few minutes sometimes); select "Different date" and choose the latest one that says Windows Update by it and click "next", and then confirm by clicking yes.
    Your computer will then restart and undo the Windows update that caused the bluescreen.
    If you're on an HP, that's all you have to do, Dells require a bit more work.
    Dells
    (Note, you will need internet access on the computer affected, or your restore disc labeled Drivers/Applications or this will not work)
    Restart your computer(press and hold the power button for 5-10 seconds if you need to turn if off from the bluescreen)
    While it is turning on tap the F8 key once a second until a text menu comes up
    Arrow key down to Safe Mode  with networking and press Enter
    Windows will load, a bunch of files will scroll past, this is normal
    Go to your Control Panel and select "System" and then click on the Hardware tab.
    Select Device Manager
    In the list that comes up, click on Image, or Imaging Devices
    Under that you should see something similar to "Integrated Webcam", right click and select "Uninstall"
    Check the box that says Uninstall the software for this device and click OK
    After it has finished, restart your computer normally.
    Insert the Driver/Apps disc and go into the Dell Resource CD and find your webcam driver/install it
    -or-
    Go to http://dell.com and enter your Dell Service Tag(usually on the bottom/back of your computer) and make your way to the Drivers page for your model and download/install the webcam software
    This will take about 5-30 minutes depending on your computer.
    Note : This plays tricks on your anti virus programs and they may say your "definitions" are corrupt/out of date. This is also a simple fix, all you have do is run your AV programs update option and everything should be fixed.
    Double note : This may or may not fix your problem if you have other issues. If you have any trouble, post here and I'll do my best to help. If you purchased your HP from Best Buy, and are within your warranty/service plan, most stores(as far as I know) are offering to fix this for free as it was not caused by the user.
    Anything else, please ask
    If you like my post, or solution to your issue/question, go ahead and click on the little star by my name and/or accept the post as the Solution. It makes me happy.
    I'm NOT an employee of Best Buy, or Geek Squad, though I did work as an Agent for a year 5 years ago. None of my posts are to be taken as the official stance that Best Buy will take on your situation. My advice is just that, advice.
    Unfortunately, that's the bad luck of any electronic, there's going to be bad Apples... wait that's a horrible pun.

    Still having trouble?  Geek Squad® now has an official write-up, which you can see here:
    http://www.geeksquad.com/intelligence/blog/blue-screen-of-death-bsod-issues-with-vista-x64-sp1/
    Cheers,
    Jason
    Community Analyst
    Best Buy® Corporate
    Jason|Community Analyst | Best Buy® Corporate
     @jayysenn Private Message

  • My computer starts turning on with a black screen and the sleep light flashes, then the old screen from when my battery died shows up behind like a blue screen, then it dies again and wont restart? And yes my computer is fully charged now, HELP!

    So the problem now is in the question, but just before this problem the initial issue was my computer would start and turn on but the backlight appeared to be on its dimmest setting I could barely make out icons and the last page I viewed. Please help I'm in college and did not back up everything plus I desparately need my microsoft office for these classes!  Thank you!!!

    Hi kmdmsu08,
    If your computer's not turning completely on, I would try the steps in this article, especially step 4:
    Troubleshooting: My computer won't turn on
    http://support.apple.com/kb/TS1367
    Take care!
    - Ari

  • Startup screen freezes with vertical lines and a restart message

    So this problem just started a couple of days ago it seems to be getting worse. Occasionally it will start-up but not often and at the moment it won't, I just keep getting this screen on start-up: http://www.flickr.com/photos/42697060@N04/3933706005/ and http://www.flickr.com/photos/42697060@N04/3934486754/
    Not sure if this is the same problem people are having with the video card or not. Thanks for the help!

    I'm getting the same look, with all kinds of squares and lines on screen, although mine starts while the computer is running with color reversals and lines on the working space. Then I get a freeze and have to do a hard re-start with the power button, and finally, what you're seeing. I did notice that when I unplugged the power adaptor, the problem has gone away, at least for the past 30 minutes or so.
    I originally thought it was overheating, since if I shut it down and left it, it would re-start normally after 15 minutes, but crash again in 10 minutes of running. Then I came here, and read about the video card. That could be, but why only when plugged into the power adaptor? The power adaptor has been acting up lately, in that the light is sometimes off, sometimes amber when screen shows 100%, like that.
    I'll plug back and in and see what happens, and put it here. 4:53 PM Saturday.
    I'll keep fooling around with it, and report back here. I'll also make an appointment for next week with the nearest Apple store - 1.5 hour drive. Grrrr. I'm home with the flu this weekend. I'm tempted to go now and shake everyone's hand.

  • P6320f after 10 minutes of use, screen pixelates, then turns gray and system no longer comunicates

    Not sure if this is a heat issue, power failure or motherboard problem.  Sometimes it powers down completely, but most of the time the power supply is still on but the monitor no longer recognizes that the computer is on and the monitor is in power save mode.  I installed a new video card hoping that would fix the problem but it continues with the new video card.

    Gumbyseabass, welcome to the forum.
    Due to the age of the computer, I suspect a failing power supply unit (PSU).  Here is a guide to help you troubleshoot the problem.  A failing PSU can cause symptoms that are seemingly not related to the PSU.
    Also, check to assure all of the components are seated properly; especially, the memory.
    Please click "Accept as Solution" if your problem is solved.
    Signature:
    HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
    HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
    HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
    HP Photosmart 7520 AIO
    ++++++++++++++++++
    **Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
    Intelligence is God given; Wisdom is the sum of our mistakes!
    I am not an HP employee.

  • Blue Screen Error on Satellite A100-920 (PSAA9)

    Hi
    I had a blue screen error during normal use and after restart, Windows suggested updating the BIOS, so I updated it with the latest version (5.10). The next day, I got another blue screen and on restart, Windows suggested I update my display drivers, which I did (to ver. 8.241)... I have an ATI Radeon X1400 GPU. After doing that, the computer crashed every time it loaded windows, with a popup about services.exe telling me the computer would turn off in 60 seconds.
    I assumed this was related to the display driver, so I replaced the drivers with an earlier-dated version (8.241-034065C). After I did this, it seemed to work and I could use the computer fine for a bit, even play games such as GTA but i am starting to get the blue screens again, usually just when opening folders, etc and not when running graphics-heavy applications. The problem definitely goes away when I disable my display drivers, but that's not much of a solution.
    I turned off the reboot on error setting and this is the information from the blue screen of death:
    *** STOP: 0x0000008E (0xC0000005,0xEE6DF5E9,0xBAD2F99C,0x00000000)
    *** system32:huy32.sys - Address EE6DF5E9 base at EE6DD000, Datestamp 45abe717
    Does anyone have any idea how I can sort this problem, it's driving me crazy!
    I have downloaded the Omega drivers for the card, but am slow to install them as I hear they can cause overheating and I think ATI/Toshiba should be able to provide me with a solution without me having to use third party drivers.

    I have Network Associates (McAfee) v. Enterprise 8. I ran a full virus scan with this and windows defender and a worm stinger utility and another microsoft app whose name I forget... all came up clean.
    I tried the omega drivers out of frustration and they cause services.exe to terminate.
    Could it possibly be a BIOS issue? I'm not sure how likely it is, since the computer definitely works with the display adapter enabled and will usually crash (BSOD) after anything from a few mins to a few hours with it enabled. I seem to be getting two types of reply from microsoft on restart, one saying there is a general driver fault and one saying there is a display driver fault and suggesting updating the display drivers.

  • New X1 Carbon DRIVER_POWER_STATE_FAILURE Blue screen error

    Just got my new X1 Carbon (20A7-CTO1WW) for less than a week, experienced a blue sceen error of death today. System is running the pre-loaded Windows 7 Professional. System has been updated with all latest drivers and BIOS.
    Using BlueScrrenView, the following are relevant information relating to the error:
    Bug Check String: DRIVER_POWER_STATE_FAILURE
    Bug Check Code: 0x0000009f
    Parameter 1: 00000000`00000003
    Parameter 2: fffffa80`0a114bf0
    Parameter 3: fffff800`00b9c3d8
    Parameter 4: fffffa80`18580150
    Caused By Driver: ntoskrnl.exe
    Caused By Address: ntoskrnl.exe+75bc0
    File Description: NT Kernel & System
    Product Name: Microsoft® Windows® Operating System
    File Version: 6.1.7601.18409 (win7sp1_gdr.140303-2144)
    Processor: x64
    Crash Address: ntoskrnl.exe+75bc0
    Can anyone assist?
    By the way, tried to install Microsoft hotfix 355256 but message shows the fix was already installed. So the error occurred while the fix was installed in the system.
    Thanks in advance.

    HERE'S WHAT THE BLUE SCREEN SAYS.
    A problem has been detected and windows has been shut down to prevent damage to your computer.
    DRIVER_POWER_STATE_FAILURE
    If this is the first time you've seen this stop error screen, 
    restart your computer.  If this screen appears again, follow
    these steps:
    Check to make sure any new hardware of software is properly installed.
    If this is a new installation, ask your hardware of software manufacturer 
    for any windows updates you might need.
    If problem continue, disable or remove any newly installed hardware
    or software, disable BIOS memory options such as caching or shadowing.
    If you need to use safe mode to remove or disable components, restart
    your computer, press F8 to select Advance Startup Options, and then
    select Safe Mode.
    Technical information:
    *** STOP 0X0000009F (0X000000000000003), 0XFFFFFA8006016050, 0XFFFFFA8006016050, 0
    XFFFFFA8005860010)
    Collecting data for crash dump...
    Initializing disk for crash dump...
    Beginning dump of physical memory.
    Dumping physical memory to disk: 100
    Physical memory dump complete.
    Contact your system admin or technical support group for further assistance.

  • Blue Restart Screen Has Appeared 4 times in One Day

    Today the Blue Restart screen has appeared four times and while each time it has successfully restarted, it is becoming quite annoying.  Also, I'm losing work though I've been lucky enough to save at good times. 
    Does anyone know why it would appear this often?   Is this a hardware or software problem?  What can I do to diagnosis it?
    Best,
    David

    To identify problem, please use eventvwr in windows . Go to computer then system , filter critical errors! Check for the one that causes a restart. If it's a software please reinstall , or update your drivers . THANKS
    KUDOS if it helped

  • Dv6 Notebook "Black Screen" following "Windows Blue Screen" error message. Caps Lock blinking!

    I have a HP DV6 notebook. I left my computer on overnight and the next morning I woke up to find a Windows Blue Screen error message. It said to restart my computer. I was in a rush so I just closed the lid. When I returned I opened the lid and the screen was black. I pressed the power button to restart it and I haven't been able to restart it since. I now have a power light, a black screen and the CAPS LOCK light is blinking twice then a pause! Please help!

    Hi btgclark,
    I understand that you are having an issue with turning on your notebook and the CAPS LOCK light blinks twice and then pauses. The following document 'Computer Does Not Start and the LEDs Blink or the Computer Beeps' will walk you through the steps that you need to follow. For your error code, it means that the BIOS has a corruption failure. This document will walk you through the necessary steps to get this resolved.
    If for some reason this document does not resolve the issue please provide me with the model number to your notebook. I have included a document 'How Do I Find My Model Number or Product Number?'
    Please let me know how this works out for you, thank you.
    I worked on behalf of HP

  • Blue screen errors in W8.1 . Please help !

    I've recently started to get these blue screen errors .. Sometimes its system service exception and sometimes its related to irql.. It usually happens when I quit a game or rarely happens while playing games .. Please help me and provide fix for this ..
    I have uploaded the dump files to mediafire and given the link below..
    https://www.mediafire.com/folder/79hn57a3lcc63ax,h8if650cjm9xojf,2a12po907477sbk/shared

    These crashes were related to memory corruption (probably caused by a driver). 
    Please run these tests to verify your memory and find which driver is causing the problem.  
    If you are overclocking (pushing the components beyond their design) you should revert to default at least until the crashing is solved. If you don't
    know what it is you probably are not overclocking.
    Since it is more likely to be a driver please run verifier first.
    1-Driver verifier (for complete directions see our wiki here)
    If verifier does not find the issue we can move on to this.
    2-Memtest. (You can read more about running memtest here)
    If you cannot boot after enabling verifier reboot into safe mode
    In Vista & win 7 (F8)
    In win 8 http://www.howtogeek.com/107511/how-to-boot-into-safe-mode-on-windows-8-the-easy-way/
    Co-Authored by  JMH3143
    Wanikiya and Dyami--Team Zigzag

  • Satellite A60 - lines on the screen

    Hi,
    I have a Satellite A60 with a graphics problem. The screen has all lines over it, and is also the same when connected to an external monitor.
    Thanks Ian

    Hello
    Usually when someone writes about some issue on the notebook there is usually a question at the end. I understand your posting as one report. ;)
    Do you have some questions about it?
    Anyway just one comment to this: graphic card is defective motherboard exchange.

Maybe you are looking for

  • SLOW SPEEDS YET AGAIN IN SHETLAND

    Once again I find myself on here complaining about slow speeds. This time were down to 626kbps and I have spoken to other folk around the isles who say theres is at a crawl as well. Can we get this looked into please mods? Latest BT speedtest results

  • Server console output

    Hi, I have been using flex from last six month. I have develped one application and now its time to deploy the application. But, I am facing one issue regarding server console output. In my application I have various remote call to java class deploye

  • Viewing my loaded data

    Can anyone tell me why I am getting the error below after executing my control file and also why I can't view that data which was loaded. SQL*Loader: Release 10.2.0.1.0 - Production on Thu Jul 12 16:28:57 2007 Copyright (c) 1982, 2005, Oracle. All ri

  • Tabindex for textfield

    Hi, Plz tell me how to set a html like tabindex for swinf text fields. Thanks a lot, Chamal.

  • Changing zone interface while zone is running

    i need to change the interface for the running Solaris zone in E2900 system. now the zone interface is ce0:1 now i need to change the interface to ce2. whether i need a reboot of the zone or not. if reboot is not needed the following is ok or not :my