Satellite A60-102: error with a autodesk autocad 2006

Hi all;
I have installed the autodesk autocad 2006 on my laptop satellite SA60-102 but it didn't run and it shows an error saying "DBX CAS 0" only with "ok", although I installed it on my desktop pc and it worked very well.
I need your help as soon as possible
Naim Kobaissy

Hi,
I hope you becomes Informations with you auto Cad Problem DBX CAS 0 under http://www.cadchat.com/forums/lofiversion/index.php/t2443.html.
If this not so, see you under the Address.
http://discussion.autodesk.com/thread.jspa?threadID=363501
By

Similar Messages

Satellite A60 - avi2dvag error

i have Satellite A60 series laptop. It is giving me an error with this file and my works gets lost all of a sudden. Some physical dump of memory starts. any suggestions what should i do?

Hello,
If neither of those solutions help, then I advise taking the computer to your nearest ASP. ATI2 is the driver for the video controller. But the problem can just as well be that the graphics processor is dying and needs to be changed out. Which your ASP will be happy to do.

Satellite A60-102 - How much HDD is possible

How much harddrive capacity used in this Laptop

Hi
The Satellite A60 is a little bit older series and I think the notebook supports the IDE HDD controller
Possibly the HDD controller would supports only 28bit LBA and this means that only 128GB would be recognized by BIOS.
I think a 120GB HDD should work but Im not quite sure if bigger HDDs would be supported due to mentioned 28bit LBA
Greets

Satellite A60-102 - Blue screen error appears on screen and system restart

Sometime Blue screen error showing on screen and system restart
how can solve this problem

Hi
What BSOD code you get exactly?
Which OS you are using?
Maybe its a driver problem. Have you checked the device manager for yellow exclamation marks?
Can you boot in safe mode?

Satellite A60-712 problems with ATI ati2dvag driver

Using the notebook after a short period of time the ati driver crashes setting the display resolution at 640x480 and at the minimum color depth.
this is the error code:
BCCode : ea BCP1 : 83E23C90 BCP2 : 83E31008 BCP3 : 83F65008
BCP4 : 00000001 OSVer : 5_1_2600 SP : 2_0 Product : 768_1
I try everything but I can't be able to solve it, any idea?

Hi!i think i have the same problem, but I own a SAt A60-123 with XP ProfessionaL sp2 installed, so maybe this could be the problem that meakes in conflict the display direver not updated with SP2 with the operating system.What do you think i could solve this problem?The OS doesn't run when I switch on the laptop;it tells me there's an error created by ati2dvag.dll which is in conflict with the OS.Any idea?Thank you in advance,
Gigi,
Italy

Satellite A60-106: Unable to open Microsoft Office 2003

I have Satellite A60-106 laptop with windows XP home edition pre-installed. After recent failure of windows i have used product recovery DVD of toshiba. Following that I was successful in downloading other software like microsoft works, one note, Norton antivirus from CD. But Microsoft student and teacher edition 2003 CD is not opening in my CD/DVD drive.
It makes normal CD accessing noice after inserting, but not accessible. Pressing 'run' shows error message as D:\ not accessible, I/O device error.
The same CD (microsoft 2003) opens with other computers.
So where is the fault and how to rectify?
I have tried all sorts of advice through web.
Can some one please help me?

Hi
For me it looks like a hardware fault. The error says that the drive is not able to read from the Microsoft CD.
There must be something wrong with the drive lens and therefore the lens cannot read the CD and the drive is not accessible!
Possibly after lens cleaning you could use this CD.

ALC-LCM-140-102 Error while installation

While installing LiveCycle ES, I'm getting the 'ALC-LCM-140-102' error with the following error message-
Failed on 'Starting target server'
Failed to start server LCServer1
Please let me know if we have missed any configuration settings to resolve this issue.
Thanks in advance.

Make sure you create JMX policies first : Adobe LiveCycle ES4 * 3.6 Creating JMX policies for database initialization
-Wasil

Satellite a60 atheros ar5004g wireless adapter code 10 cannot start

i have a satellite a60 s-156 with with a atheros ar5004g wireless network adapter..when i upgraded the driver code 10 appearaed in device manager, i rolled back to the old driver, to the same results.
i then performed a fresh install with the recovery dvd, with the same disappointing results.
when i purchased the laptop the only software i received was the restore dvd.
i have downloaded other drivers, with the same results.
any suggestions, by the way the wifi turn on light is a orangish color.....thank you

Hi
Well, if after the recover procedure the card can not be recognized so I assume that the card has a fault. In this case you should ask the service partner for a help.
Best regards

Acrobat 8.1 Pro & AutoCad 2006 problems

We're having problems with the "latest version" of Adobe Acrobat Professional working properly with Autodesk/Autocad 2006. It is dropping out areas at random as well as adding in lines at random. Has anyone else heard of this problem or a fix. We have all the computers set to install the patches as Adobe pushes them out. It is getting very frustrating since we upgraded because it was supposed to work with Autocad better and it works worse. The previous version of Acrobat didn't have this problem...
Thanks

Aside from the file problem, it is not consistent in what it doesn't include from one PDF to the next of the same drawing. Of course it may be perfect. It is not layers it is sections of layers, or even parts of a letter. One example a large bold "C" which is made up of a number of lines doesn't include all the lines in the lower half so it looks bold on the top but not on the bottom. It may leave out difusers from one section but not another or a piece of duct work. It has also put in random lines. Sending a sample file will not give you a good picture of the problem.

Satellite A60 Power Saver error

Hi all,I have a Satellite A60 and I am getting the following error at start up;"Power Saver A fatal error has occured this program will be terminated code ox2". At various times whilst logged on my notebook turns off and to continue I have to log in again as from start up.Can anyone please help with a solution.Thank you,Mark.

Hi Mark
The only thing that you can try is to remove power saver and try to install it again. It is also possible that this will not help because there are some entries in the registry. If there is no problem for you the best way is to reinstall the unit with recovery CD. After that it will work again properly.
In my opinion it is not easy to repair some specific tools like power saver.

Satellite A60 - Conflict with the clock

Greetings, I have a problem with a Toshiba Satellite A60, is this: the PC clock advances one second as time goes 4 seconds, ie in the pc are the clock is 9:29:17 and the same time but to change one second on the pc, is like this: 9:29:18 and the clock has advanced 4 seconds running 9:29:21, and disassemble the laptop and check the internal battery of the board and is soldered to the pc, if you can not take off, but I believe that working with the battery of the laptop, the pc does not have windows installed, in fact I'm going on no hard drive and entered the BIOS and still gives the error.
That could be? I suggest they do? Thank you.
My language is Spanish, so I apologize for my English.

Hey mate,
To be honest I really dont know what mean exaclty. I only understand that you have problems with the clock.
The RTC (BIOS) battery can be charged if you leave the notebook connected to AC/DC adaptor. This also loads the RTC battery.
Check this!!!

Satellite A60-174: system32\drivers\isapnp.sys error

Hello
after many nights and using the recovery CD nd trying everything my Satellite A60 do not want to work. Even after I cleaned and formt everything new.
I got this error: system32\drivers\isapnp.sys
I installed the HDD in another laptop and works fine. If I bring the HDD back to to the Satellite A60 I still get this error.
OR the Toshi stays at Debugger DLL when I try to install another version of win XP Pro.
I think the RAM or something in the motherboard is broken. Can I change the Motherboard RAM?
Would it help if I add some ram in the extra RAM slot?
(I use only the stock ram as it is on the motherboard.
anyother idea what this system32\drivers\isapnp.sys can be.
It says to start the laptop with the original Win XP cd and try with an R.
Well this dos NOT work in this laptop.
I can not come to the WinXP screen. The laptop will break the instalation before that!
Konstantin

Hi
It seems youre right. Have investigated a little bit and it seems that this notebook was delivered with a 256MB internal memory.
I dont think that you will be able to remove the memory or to solve this issue yourself.
I really recommend contacting the Toshiba service partner. The guys have more experience with such reparation procedures.
If you will open the notebook and will try to remove something so I think its possible that you will damage something more on the motherboard.

Satellite A60 - BSOD when surfing with wireless PCMCIA card

Hello i used to browse internet with a wireless cardbus WL-54-CB (ADVANCE) on my Satellite A60-120 running windows xp sp2.
I was working well until i decided to clean my computer which was slowed down by viruses.I use Ad-aware and Kaspersky and updated patches on wndowsupdate.Now the PC is clean but i have problems with the PCMICA card, when i launch IE i surf for one minute and windows crashe BSOD !
It displays :
STOP 0x00000001 (0xFE570000,0x00000002,0x00000001,0x819587DE)
Any ideas to fix it ?
Thanks.

Cmon Guys... Stop that Toshiba Recovery Disk madness... Its no use... The Recovery Disk is as old as your laptop.. maybe older... The whole bunch of drivers in there are old... Its no use... Look.. For example if you have an Nvidia graphic Chip, you have to install the newest Nvidia driver... Prefer using the Nvidia driver, never the driver from Toshiba... And besides... It is always better to install the system manually...
Back to the question... Since you had a virus I would recommend to reinstall your OS, even you think its clean... To solve your problem...
deinstall the wireless card driver
deinstall the PCMCIA driver and install the newest driver. Write down the Model and some other infos before deinstalling it :) ...
reinstall the wlan crad driver...
test it :)
I always recommend to make a system backup every month... So if things go wrong... Just restore the backup... and everything is fine again... :)

Need help with installing Windows XP on Satellite A60

I have toshiba satellite A60 and I need to know steps of reformatting the hard drive and installing Winxp. what do i need and how?
also..how can i save all the files and emails on Microsoft outlook? i'm not well experienced with this.

Hi,
the installation of XP is very simple. You just have to put the CD in and start the installation, the installation wizard is guiding you through the whole process. A little advice: when it comes to partition the drive, you should delete the old partition, create a new one and format it with ntfs. Dont worry the installation wizard will guide you very detailed trough that process so it will go very easily.
Regarding your backup:
Thats my way to backup my files:
I have a external USB-HDD drive and I put all my files on it so I can copy them back after I install a new system. To save your outlook you can check this site:
http://www.sitedeveloper.ws/tutorials/outlook.htm
They describe very nice how to backup you outlook.
Good luck
Greets

Problems with grahic card on my Satellite A60-672

I have a Satellite A60-672 which has graphics by ATI. On a number of occasions on start up it has crashed and the online crash system says everytime that it is ATI technologies. I have emailed ATI and they said it is nothing to do with them.
I have tried to email toshiba but none of the address work. The crash system tells me to uninstall the software but seeing as I didnt put it on, i am wary about doing this as it might muck up the operation of my laptop.
Currently my laptop works fine with this continuous problem. Has this happened to anyone else or does any one know how to contact toshiba.
Thanks

Hi,
here is a url where you could choose your country. Then you have to choose PC systems, after a new site is shown and there is on the left side a telephone number from the Toshiba infoline. They could say you the country specific number for the Toshiba Support hotline!
http://www.toshiba.co.jp/worldwide/europe.html
Bye and a happy new year!
TOK

Satellite A60-102: error with a autodesk autocad 2006

Similar Messages

Maybe you are looking for