Satellite A60-652: ati2dvag driver has stopped working

Hello,
Recently I have some problems with my graphics. My satellite freezes up, and goes to a low resolution with a few colours. A message says the ati2dvag driver has stopped working. After rebooting the satellite shows a blue screen and reboots...same thing happens. Only shutting down and retrying after a few minutes gets me back to normal Windows.
I tried to look for some new drivers, but I can't indicate my model (SA60-652)... is this model too old for updates???
Toshiba SA60-652
ATI MOBILITY RADION 7000 IGP
ati2dvag driver (6.14.10.6430)
Windows XP (SP2)
AVG virus scan
Hitman Pro anti-spyware
ATI hydravision installed but never used :-/
Notebook recently has been rising in temperature...I will deal with this after my final thesis (8 may)
Please can you help me?
If you can, please be clear in instructions, 'caus I don't know a lot about computers... (PEBCAC)
Thanks!

Thank you for this answer,
I found the driver myself, uninstalled the old one and installed the new one (same driver, so actually just a reinstallation).
I use the programm Speedfan to monitor my cpu-temp, and I noticed a few months ago that temperature stayed between 60 and 70 degrees. Now my laptop is easily rising to temperatures of about 87 degrees. Think this is the answer... The notebook even completely stopped working suddenly a few weeks ago, due to high temp. I will look into it to clean the fans and stuff. Guess I'll find some more info on that on other forumthreads.
Thank you for your help
Jeroen

Similar Messages

Satellite P300: Display Driver has stopped working using external monitor

I have a number of these Satellite P300 PSPCCA-OC201Y and recently bought external monitors for them.
Since then we seem to be getting "Display Driver has stopped working and has recovered" messages, then after about 5 of these, it crashes.
Starting with one machine, I have updated display drivers, bios was current, all to no avail.
I then did a complete system restore back to original. Has not solved the problem.
Any ideas?

hi Keven Dickenson,
as you said you restored the system and still there is no way to get things work it may be a hardware issue...
i my opinion you should consult a servicepartner to check this out...
is there any of the machines working with the external monitor at all?
if none of them is able to connect to ext. display maybe your installation has a problem or the monitor is faulty...
try it with another monitor and recover one system to factory installation....

HD 5770 HAWK: ati2dvag display driver has stopped working normally

I keep crashing to desktop with an error dialog "ati2dvag display driver has stopped working normally" while playing Trackmania United. The crash is into a 640x480 4-bit color desktop from 1920x1080 32-bit. I updated to latest drivers for the video card and bios, and I am not maxing out my card when playing this game, it is fairly average. I don't get this error playing other games on higher settings. This behavior is fairly consistent. Additionally in TMU I keep having saturation and contrast flactuations: saturation loops between highly saturated to barely saturated and then repeates over about 30sec-1min. The looping is very smooth. Any help in resolving this issue is appreciated. Thanks
My setup:
Windows XP 32-bit
MSI R5770 with driver 8.712.0.0
ASUS P7P55D-E Pro LGA 1156 Intel P55 SATA 6Gb/s USB 3.0 ATX Intel Motherboard
Intel Core i5-750 Lynnfield 2.66GHz 8MB L3 Cache LGA 1156 95W Quad-Core Processor
COOLMAX CUG-700B 700W ATX12V v2.2 / EPS12V SLI Certified CrossFire Ready
G.SKILL Ripjaws Series 4GB (2 x 2GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800) Desktop Memory Model F3-12800CL9D-4GBRL x 2=8GB total

Quote from: hd5770newb on 26-April-10, 08:52:57
Well, any window I have open on the desktop, iTunes, Firefox, IE, etc when I move that window around, or if I resize it, the content inside that application window is repainted very sluggishly. I would say it takes about 1/8 to 1/4 of a second to redraw. With iTunes I can see the repaint take maybe 1/2 second from top to bottom.
This happens at any time I am in the desktop.
That sounds like there's something not right with the graphics drivers.
Also, check your monitor refresh rate is set right.
How about testing with some older drivers to see if there's any change. Either use the ones from the CD that came with the graphics card or use the ones in this >>link.<<
A useful utility to remove old parts of drivers is Driver Cleaner Pro. You might want to give it a go if you choose to try other drivers. Available >>here.<<

Intel display driver has stopped working properly, distributed by Lenovo

Toshiba Satellite L355-S7915 with Windows Vista Home Basic SP2 32-bit: Keep getting "Intel display driver has stopped working properly and has recovered" when turn on computer or log on with new user. Driver version is 7.15.10.1829. This is more of an annoyance, which I can enter through and continue, but I would like to get the messages to stop. Any ideas? Thanks.

Me too, only I am using a desktop through e machines with an Intel 82945G Express Chiplet Family. And my pc just crashes and it is getting very annoying! for the longest time Vista couldn't provide a solution and today is sent my to Lenovo. I may be out of touch with the tech world but to my understanding I don't have anything "Lenovo" unless thats the new fancy name for Intel. But I can't seem to find a solution for this problem and am sick of it! Any advice? thanks and happy holidays!

HT3964 Hi folks, I own am IMac 27" running OS X 10.8.2. The optical drive has stopped working in that it accepts the disc but spits the CD, DVD even my original iMac install DVD back out, after attempting to read the disc. Any of you kind folks any ideas?

Hi folks, I own am IMac 27" running OS X 10.8.2. The optical drive has stopped working in that it accepts the disc but spits the CD, DVD even my original iMac install DVD back out, after attempting to read the disc. Any of you kind folks any ideas?

Have you tried one of those CD cleaning Discs yet?
Have you done a PRAM reset, CMD+Option+p+r...
http://support.apple.com/kb/HT1379
In fact, do 3 in a row, takes a bit of time.

Ever seen the error "ialmrnt5 display driver has stopped working normally"?

Have a user who hasn't used E-test in about a year. He has version 8.01.0249 with IE 7.0 and is getting an error running a script: "Windows display driver stopped responding. The ialmrnt5 display driver has stopped working normally . . . .".
On a different machine with E-test 7.0 with IE 7.0, the same script works fine.
Should I have him upgrade to version 8.20.0526? Also, assuming I upgrade his version, why does the same script work with E-test 7.0?
THANKS!

Hi,
It would be better to upgrade to version 8.20.0526. Prior to eTest Suite 8.20.x there was no support for IE 7. There were some cases where eTest Suite would work with IE 7, but it was not consistent since the product did not has IE 7 contemplated in the design. That can explain why it works with e-Test Suite 7.0.
Additionally in 8.20.526 there are several additional features that makes the tasks easier, and there are several bug corrections that can save you time when troubleshooting scripts.
If you are planning to use eTester for Load testing scripts I would recommend moving to 8.20.0569, which has additional bug fixes that can save you a call to support.
You may want to contact your Empirix Sales Rep in order to know if your license would work with the latest version of e-Test Suite or just install it and try the license.
Once you install e-Test Suite 8.20 make a quick test to see if it works with your web application, then, consider the alternative of upgrading all the other computers that will have eTest Suite. It's better to work in a consistent environment where everybody has the same version because you will ensure compatibility of scripts and configuration settings, it will be easier to maintain your environment, and it will be easier to troubleshoot computer problems since you should all have the same configuration.
e-Test Suite 7.0 may not be supported since it's older than two releases than the current one, even if the script work with e-Test Suite 7.0 I would look for the upgrade.
Regards,
Zuriel

My dvd drive has stopped working... put disk in...spits it out! Can anyone help?

My DVD drive has stopped working...put a disk in...spits it out. Can anyone help?

If you have a mid 2010 iMac, it is not PPC. PPC refers to pre-2006.
The 2010 is getting close to the age the PRAM battery might go, so that could be at issue.
The other issue is that the drive itself could only handle up to a certain speed DVD disc:
http://support.apple.com/kb/SP588
Slot-loading 8x SuperDrive (DVD±R DL/DVD±RW/CD-RW)
Writes DVD+R DL and DVD-R DL discs at up to 4x speed
Writes DVD-R and DVD+R discs at up to 8x speed
Writes DVD-RW discs at up to 6x speed and DVD+RW discs at up to 8x speed
Reads DVDs at up to 8x speed
Writes CD-R discs at up to 24x speed
Writes CD-RW discs at up to 16x speed
Reads CDs at up to 24x speed
If any are near the top end, that could explain it.
Some copy-protected commercial DVDs that were recently released may have difficulty with Apple's drives.
Some non-region discs may have difficulty if you are outside of the country region the disc was made. Apple gives you several attempts to setup regions.
If you or anyone else stuck an SD card in the CD drive by accident, it would spit out discs regardless of what kind you put in. Good to try a commercial music CD you know worked before, or a commercial DVD you know worked before under 10.6.8.
I know for instance some Netflix DVDs won't read on my 10.9 installed iMac of the same age but will work on the 10.7 installed MacBook Pro that is newer. And switching back to 10.6 on the same iMac doesn't make a difference.
http://www.macsales.com/ offers external drives as well as internal replacement drives worldwide.
Bluray is not compatible.
Discs with sticky label may not work because they make the disc out of balance, and the sticky can get into the drive mechanism.
Barring anything else, it could have gotten dust accumulated. Bring it to the genius bar of an Apple Store if still baffled.

Hi, I have a HP pavilion dv4 laptop computer. My E:\ CDDVDW TS-L633M cd drive has stopped working

Hi I have a HP Pavilion Dv4 laptop computer. My E:\ CDDVDW TS-L633M cd drive has stopped working. When I insert a new CD or an exiting cd into the cd drive, the computer displays a message to insert a cd into the drive. i Know that the cd that I'm inserting into the drive should be readable, but the computer doesn't recognize it. When I run the HP support assistant, and choose the HP Optical Disc Drive Check, I get the message "Insert media in : E:\ hp CDDVDW TS-L633M
If you want to do write testing, insert blank writeable media, Otherwise, read-only testing will be performed. When I insert a disk with a program that I want to install on the computer into the cd drive and click the next button, I get a window that says:
"Media Identification:
Wait while the media is being Identified."
Then another window is displayed with the message:
"Media Identification
No disc has been detected."
But I know that the disk is formatted correctly for my cd reader to recognize it.
Please Help,
-Ron

Hi Ron,
First, try the automated fixit from Microsoft on the link below.
Windows 7
Vista
Check if the drive is now working.
If the drive is not working, click the Start Menu, open the Control Panel and click on Device Manager. Next click to open DVD/CD-ROM Drives. Right click the drive and select uninstall. Do not delete drivers if asked. When the device has uninstalled click on the 'Scan for Hardware Changes' icon ( usually just below Help on the toolbar ). Let windows reinstall the drive and see if it now works.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Upgraded itunes now my dvd drive has stopped working

I recently updated itunes and now my dvd driver has stopped working. My computer won't even recognize my dvd drive. I have uninstalled and reinstalled and uninstalled itunes several times. I've tried system restore. I've even looked for an older version of itunes and no luck. I took it into Fry's electronics and they fixed it but when I hooked up my ipod it stopped working again. I don't know what to do. This is really frustrating and I am just tired of itunes messing with stuff and constatly crating new versions. I've read other threads and have tried some of the suggestions with the registration which didn't work.
Can you please help me.

You might get more help if you post your question in the correct forum.
This is the 'iTunes for Mac' forum and I can see from your post that you actually have a PC.
PC users will not really be reading this forum, which is the help you need.
Try posting your question here :-
http://discussions.apple.com/category.jspa?categoryID=150

Equium A100: DVD/CD drive has stopped working code 22

Toshiba Equium A100 on Vista operating.
DVD/CD drive has stopped working and is showing as disabled. Have tried to re-enable but error code 22 returned. Can anyone help?

Hi
The Microsoft page provides these details about error code 22
*This device is disabled. (Code 22)*
_Recommended resolution_
+Enable the device by using Device Manager.+
+In Device Manager, click Action, and then click Enable Device. This starts the Enable Device wizard. Follow the instructions.+
It looks like you have already tired this. Well, in your case I would recommend removing the CD/DVD drive from the device list in the device manager. Just simply mark the device an press delete.
Then restart the notebook and check what happens.

My DVD drive has stopped working.

My DVD drive has stopped working. Any suggestions?

In what way stopped? Completely dead? Won't burn? ...?
Intel-based Macs: Resetting the System Management Controller (SMC) - http://support.apple.com/kb/ht3964
If completely dead, buy a new one.

My DVD drive has stopped working. Where are the drivers for HP GH60L?

My DVD/CD drive has stopped working. Where are the drivers for HP GH60L? HP Pavilion Elite HPE-350T.

Hi,
Please try the following first:
http://support.microsoft.com/mats/cd_dvd_drive_problems/en-us
Hope this helps.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

「Display driver has stopped working and recovered successfully」

I have a MSI GS60 2PC GHOST laptop.
Graphic Driver: Intel HD Graphics 4600
When I was playing a game on my laptop, it suddenly lagged or the game screen turned black, then recover, turned black then recover... multiple times and each time I get a message saying that the "display driver has stopped working and recovered successfully" on the bottom right.
I have tried updating the graphic driver and it worked for about an hour or so, and the problem came back.
Need help in solving this problem!

Does this happen when you run the game by using dGPU(NVIDIA graphics) or iGPU(Intel graphics)?
(Check the color of your power button light, it lights red when dGPU is running and blue when iGPU is running)
Does this happen on all games you play or just one single game?
Tell your current graphics driver version(both NVIDIA and Intel graphics driver).
If you're running the game with NVIDIA graphics, check your vbios version in NVIDIA control panel(Right click on the desktop> NVIDIA Control Panel> System Information>Video BIOS). There is version 80.04.EF.00.22 released on the MSI website, and if you have a different one, I'd suggested to update the VBIOS and see if the problem still remains.
VBIOS Download link: http://dl.msi.com/download_files/frm_exe/N15P-GX-B_80.04.EF.00.22.zip
VBIOS Update Guide: http://www.msi.com/files/pdf/VBIOS_Update_under_DOS_mode_EN.pdf

Satellite T130: inbuilt web camera has stopped working

Hi, I have the same problem of the question bellow, like I have looked around and I was not able to find the answer I need.
I have a Satellite T130 and, suddenly, the inbuilt web camera has stopped working properly. A blue light is on, but there is no image. What can I do?
Thank you

Hi,
the blue light is beside the web cam, on the top of screen. But this light is on when I try to use the web cam in anywhere, like Skype, Msn or even in programs in the computer that only take a pictue or make a video of you, without ineternet (I do not know the name of this program). But it seems that computer and the programs recognize the web cam, because there is no messages when I turn on the web cam.
In Skype settings is the same, there is nothing wrong, there is no different message. The only thing is when I try to take picture a message appears: "failed", but the video seems to record normally, although everythng is black.
Could you understand what I meant?
Sorry about my english....

Satellite X200-15K - Flash Cards has stopped working

Hi
I have a Satellite X200-15K with Vista Home Premium.
The laptop is two week old, and all of a sudden every time the laptop startup, I get the following message:
"Flash Cards has stopped working"
What can I do to fix this?
thanks
Leon

Hi
Try please with Start-All Programs-Toshiba-Utilities-Restart Flash Cards.
Hopefully you will be able to use Flash cards again.

Satellite A60-652: ati2dvag driver has stopped working

Similar Messages

Maybe you are looking for