Satellite A60-712 problems with ATI ati2dvag driver

Using the notebook after a short period of time the ati driver crashes setting the display resolution at 640x480 and at the minimum color depth.
this is the error code:
BCCode : ea BCP1 : 83E23C90 BCP2 : 83E31008 BCP3 : 83F65008
BCP4 : 00000001 OSVer : 5_1_2600 SP : 2_0 Product : 768_1
I try everything but I can't be able to solve it, any idea?

Hi!i think i have the same problem, but I own a SAt A60-123 with XP ProfessionaL sp2 installed, so maybe this could be the problem that meakes in conflict the display direver not updated with SP2 with the operating system.What do you think i could solve this problem?The OS doesn't run when I switch on the laptop;it tells me there's an error created by ati2dvag.dll which is in conflict with the OS.Any idea?Thank you in advance,
Gigi,
Italy

Similar Messages

Satellite L505-S5990 Problems with CD/DVD drive.

I have a new Satellite L505-S5990 using Windows 7. I have tried to burn a backup disc using my laptop but I keep receiving an error saying that the burner is busy or that I should update the driver. I have already updated the DVD/CD driver to it's latest version. Does anyone know what I can do to fix this problem?

Go into device manager, uninstall the DVD drive, then reboot the system to have WIndows automatically re-install it. This often times take care of the problem.
If you don't post your COMPLETE model number it's very difficult to assist you. Please try to post in complete sentences with punctuation, capitals, and correct spelling. Toshiba does NOT provide any direct support in these forums. All support is User to User in their spare time.

Xorg7 Problem with ATI driver?

After upgrade my X sever crash :cry:
I see a error message saying something like this:
(II) Loading sub module "radeon"
(II) LoadModule: "radeon"
(II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
(II) Module radeon: vendor="X.Org Foundation"
compiled for 7.0.0, module version = 4.0.3
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 0.8
(WW) ****INVALID IO ALLOCATION**** b: 0x3000 e: 0x30ff correcting
(II) window:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) resSize:
[0] -1 0 0x00000000 - 0xffffffff (0x0) IX[B]
(II) window fixed:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
Requesting insufficient memory window!: start: 0x0 end: 0xffff size 0xd0220100
(EE) Cannot find a replacement memory range
(II) resource ranges after probing:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xd0210000 - 0xd02100ff (0x100) MX[B]
This is my xorg.conf file:
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
RgbPath "/usr/share/X11/rgb"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/75dpi"
FontPath "/usr/share/fonts/100dpi"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
EndSection
Section "Module"
Load "record"
Load "xtrap"
Load "glx"
Load "dbe"
Load "dri"
Load "extmod"
Load "freetype"
Load "type1"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "IMPS/2"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
#DisplaySize 320 240 # mm
Identifier "Monitor0"
VendorName "STN"
ModelName "S/T 77E/76E"
### Comment all HorizSync and VertSync values to use DDC:
HorizSync 30.0 - 70.0
VertRefresh 50.0 - 160.0
Option "DPMS"
EndSection
Section "Device"
### Available Driver options are:-
### Values: : integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "NoAccel" # [<bool>]
#Option "SWcursor" # [<bool>]
#Option "Dac6Bit" # [<bool>]
#Option "Dac8Bit" # [<bool>]
#Option "BusType" # [<str>]
#Option "CPPIOMode" # [<bool>]
#Option "CPusecTimeout" # 
#Option "AGPMode" # 
#Option "AGPFastWrite" # [<bool>]
#Option "AGPSize" # 
#Option "GARTSize" # 
#Option "RingSize" # 
#Option "BufferSize" # 
#Option "EnableDepthMoves" # [<bool>]
#Option "EnablePageFlip" # [<bool>]
#Option "NoBackBuffer" # [<bool>]
#Option "DMAForXv" # [<bool>]
#Option "PanelOff" # [<bool>]
#Option "DDCMode" # [<bool>]
#Option "MonitorLayout" # [<str>]
#Option "IgnoreEDID" # [<bool>]
#Option "UseFBDev" # [<bool>]
#Option "MergedFB" # [<bool>]
#Option "CRT2HSync" # [<str>]
#Option "CRT2VRefresh" # [<str>]
#Option "CRT2Position" # [<str>]
#Option "MetaModes" # [<str>]
#Option "MergedDPI" # [<str>]
#Option "MergedXinerama" # [<bool>]
#Option "MergedXineramaCRT2IsScreen0" # [<bool>]
#Option "MergedNonRectangular" # [<bool>]
#Option "MergedMouseRestriction" # [<bool>]
#Option "DisplayPriority" # [<str>]
#Option "PanelSize" # [<str>]
#Option "ForceMinDotClock" # <freq>
#Option "ColorTiling" # [<bool>]
#Option "VideoKey" # 
#Option "RageTheatreCrystal" # 
#Option "RageTheatreTunerPort" # 
#Option "RageTheatreCompositePort" # 
#Option "RageTheatreSVideoPort" # 
#Option "TunerType" # 
#Option "RageTheatreMicrocPath" # <str>
#Option "RageTheatreMicrocType" # <str>
#Option "RenderAccel" # [<bool>]
#Option "SubPixelOrder" # [<str>]
#Option "ShowCache" # [<bool>]
#Option "DynamicClocks" # [<bool>]
#Option "BIOSHotkeys" # [<bool>]
#Option "VGAAccess" # [<bool>]
#Option "ReverseDDC" # [<bool>]
#Option "LVDSProbePLL" # [<bool>]
#Option "AccelMethod" # <str>
Identifier "Card0"
Driver "ati"
VendorName "ATI Technologies Inc"
BoardName "Radeon RV100 QY [Radeon 7000/VE]"
BusID "PCI:4:2:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection

I hada problem with ATI in my xorg 7 and my solution was to change the xorg.conf driver to ...vesa.
I don't know if your card supports fglrx but I suspect it may not and the ati-drivers are for that function.
Just a thought...

Satellite Pro A120: I have problems with the graphics driver installation for W2k

I have installed windows 2000 on an A120 the system is fully service packed and up to date before I even begin installing the required drivers I am unable to restart the system. Once I install the drivers as recommended I have problems with the graphics driver as it will not install because it requires a restart and then I am unable to install any new programs that require a restart as the driver has not installed correctly.
The laptop is a A120 Pro, 1 week old and came with XP home, because of this toshiba will not offer me support as I have changed the O/S even though they obviously support 2000 on this laptop as they supply the drivers.
Any ideas would be greatly appreciated.

the reason the driver is not working is down to a problem with the windows 2000 not having the ability to reboot.
When you select restart the system appears to power down then stays switched on. Now if I try to install software I get an error saying that the system needs to complete a restart to finish the install of the driver.
The restart problem happens as soon as win2k is installed as although I have now shipped the laptop to the sales team I have another one which has just had a clean install of win2k without any drivers and the fault is present on this one.
I am thinking it could be to do with power management but I'm not to sure as I have never come across this as I normally purchase machines which accept just about any O/S.

Problems with ATI Radeon HD 2600, electrical interference or flickering pix

Problems with ATI Radeon HD 2600, electrical interference or flickering pixels
I have a Macro 8 core purchased just 4 months ago with the ATI Radeon HD 2600. Just started getting what looks like electrical interference or flickering pixels all over the screen. It gets worse and worse to the point where i see and cant work then clears up for an hour and then comes back.
If I change the resolution from 1680x1050 to 1600x1200 everything looks fine and the problem goes away.
Monitor works fine on two other computers, driver is up to date.
Would like to upgrade at some point just disappointed that I’m already having problems.
Any suggestions would be very helpful, in the mean time I’ll searching the forums.
Thanks,

When you called Applecare or went to a Genius bar were they of no help?

Problem with the Display Driver

Hi.
I just got this message when I started Adobe Photoshop today, that's the CS4 edition, about that there was a problem with the Display driver: "Photoshop have encountered a problem with the display driver, and has temporarily disabled GPU enhancements. Check the video card manufacturer's website for the latest software. GPU enhancements can be enabled in the Performance panel of Preferences"
My problem is not what to do but how to do it. I went to System profiler and found something "ATI Radeon HD 2600 Pro, and: Chipset Model: ATI,RadeonHD2600".
And so I want to ATI's website but can't find what I'm looking for.
Any help?

I have cs6 - master collection. I bought it on last december and i didn't upgrade it.
"After Effects" works for some minutes and then it stucks and give the massege above
"Display driver NVIDIA Windows kernel Mode Driveer, Version 334.89 stopped, responding and has succesfully recovered."
and preimer works and suddenly the computer crashes not before giving the massege :
"The NVIDIA OpenGL driver lost connection with the display driver due to exceeding the Windows Time-Out limit and is unable to continue.
The aaplication must close. error code: 7"
I have new computer :
proccesor :Intel Core i7-4700MQ Haswell 2.4GHz
Nvidia Geforce GT 740M
Video NVIDIA® GeForce® GT 740M 2GB
ram 8GB DDR3
hard disk : 1TB 5400RPM + 8GB SSD Cache
operating system :Windows 8 64 bit.

Problem with ati radeon in 4530s

hi ....i have problem with ati radeon graphic in hp 4530s ....
when i install graphic driver apear black screen and i dont see anything ....
i change windows and load that properly but when install graphic driver black screen apear again..
driver download is corectly i download driver from hp this problom is not from driver..but i dont what's problem
Please Help Me....Thnx
Sorry my english language is weak...:manvery

Nimestä päätellen oletan että oot varmaan suomesta
Eli suomeksi sanottuna osnavi sanoo että ongelma voi johtua liian heikkotehoisesta virtalähteestä, sitä ei voi säätää tehokkaammaksi mistään biosista vaan jos se on alitehoinen pitää hommata uusi tehokkaampi virtalähde. Eli nuo arvot löytyy todennäköisesti sen virtalähteen kupeessa olevasta tarrasta. Se 12 volttia pitäisi olla vähintään 12 amppeeria että se riittäisi kunnolla radeonin näytönohjaimelle. Yleensä 300 wattinen poweri on riittävä, eli siinä tarrassa pitäisi olla maininta ainakin siitä kokonaistehosta, esim total output 300w tai jotain vastaavaa. Vika voi aivan hyvin olla jossain muuallakin, mutta yleensä täällä aina ensimmäiseksi syylliseksi arvellaan virtalähdettä, itselläni kyllä toisessa koneessa radeon 9200se näytönohjain toimii vaikka virtalähde on vain 200 wattinen. Niin ja muuten... eikö olisi helpompaa kysyä neuvoa ensin joltain suomenkieliseltä sivustolta

Satellite P100-202: problems with screen again

Hello everyone! I'm posting about a problem with my Toshiba P100-202's screen. I recently posted in the thread "Satellite P100-202: screen will freeze" and my current problem is actually quite similar to what is explained in the thread "Satellite P100-119: display doesn't work anymore". Here's my story, hoping that someone will be able to help me avoid having to send the computer to a technician:
After my previous problem I decided to get my screen replaced. Everything seemed fine, apart from on occaisonal instances, especially when I was using the program "Internet Explorer", in which the screen would sort of restart, ie. everything went black for a few seconds (music etc. however would continue) and then (boom) everything would reappear, sometimes in ultra-zoom for a second or two. The computer (operating system=Windows 7) would report "problem with NVIDIA graphics driver", and then operations would continue normally. This happened several times, although not frequently, and I wasn't too worried about it. And then, a few days ago, I was using the newest release candidate of Internet Explorer 9, and the screen blacked out, and my music continued, and I thought "OK, no problem", and then a few seconds passed, and then the music stopped (and I was thinking "uh-oh"), and then... the blue screen of death.
OK, no panic, restart, but of course there's no welcome note, no nothing, just a blank screen which with the backlights still working created an ominous greyish hue. And then suddenly the mouse appeared, followed by the entire display, so I unwisely dismissed the incident. Ten minutes later, same thing, and this time not even the blue screen of death as consolement, just the grey nothingness.
A few days of rest, a quick dusting of the battery compartment, but no, even though I believe the operating system is working fine (caps lock light works and little hums and whirrs occur as usual), there is no question about the fact that the screen does not work.
PS. Sorry if my post is too long and no, I do not have access to an external display!!
While I'm at it, is anyone able to explain why a 25-minute lasting battery can take hours or even days to charge?
Message was edited by: trrttrry

Thanks for your super-fast reply, as***! Unfortunately I fell asleep just before you posted. Anyway, indeed I was not expecting a manual fix to be available, so I'll see if I can find the installation disk in my ocean of cd-roms, and if that doesn't work I'll call up on a mechanic, see what they say (nowadays the most common answer is "rien faire", however I have a half-friend in the job who might be able to elaborate further), and in the event, give up on this one and go and buy a brand new and - as they now all are - webcam equipped laptop or netbook as you call them (and preferably not a Toshiba, either, unless you can convince me that 1. The battery no longer lasts a mere third-of-an-hour after three years of usage and 2. The screens are built to last a good ten years). After all, I've always been unlucky with electronics. The problem is however, how will I get all my files moved, knowing that the best form of back-up I have is a long-lost USB key?
PS. Keep me updated if you get any more information on a possible immediate cure!

Firefox 6.0.1 causes extreme problems with ATI Catalyst 10.x drivers on a Win7 x64 system. When I roll back to Firefox 6.0, no problems. Can this be resolved?

Firefox 6.0.1 causes extreme problems with ATI Catalyst 10.x drivers on a Win7 x64 system. Took me quite awhile to identify, but when I roll back to Firefox 6.0, no problems. Once Firefox recognizes this and reinstalls the 6.0.1 update then severe display driver problems occur causing very erratic display behavior and ultimately rendering the system inoperative. The problem appears to occur within a minute or two after Firefox has been opened and it occurs even if Firefox has been subsequently closed prior to the actual event taking place. I have attempted this 6 times just to ensure that the problem was associated with the 6.0.1 update.

On Mac OS, plugins are installed to a common location, usually ''' /Library/Internet Plugins''' for system-wide availability or to '''~/Library/Internet Plugins''' for a specific user. Ref: http://kb.mozillazine.org/Issues_related_to_plugins#Background
Does Java 1.6.0_31 work on Safari or another browser?
I also found the following, in case it helps:
*http://reviews.cnet.com/8301-13727_7-57414869-263/how-to-use-java-applets-in-os-x-after-java-2012-003-update/
*http://stackoverflow.com/questions/6411909/how-to-downgrade-jre-jdk-on-mac-osx

[SOLVED] Problem with second SATA drive

My laptop has two hard drive bays, and just recently I added a second SATA drive (moved it from my old laptop) to the extra bay.
Now, anytime the second hard drive /dev/sdb has any heavy disk activity, it appears to cause a shutdown of the SATA port for the first drive (/dev/sda)! Though the second drive is still fine, and I can still write to it until the system crashes from the root drive (on /dev/sda) being shutdown.
If I don't mount and use the second drive, the first drive works just fine, and I can pound it with traffic without issue.
I can reproduce this problem by copying large amounts of data to drive 2.
This is when I get in my dmesg when the first SATA drive shuts down:
[ 3013.249525] ata1.00: exception Emask 0x0 SAct 0x7ff SErr 0x0 action 0x6 frozen
[ 3013.249532] ata1.00: failed command: READ FPDMA QUEUED
[ 3013.249539] ata1.00: cmd 60/08:00:78:b8:ba/00:00:24:00:00/40 tag 0 ncq 4096 in
[ 3013.249539] res 40/00:00:00:4f:c2/00:00:00:00:00/40 Emask 0x4 (timeout)
[ 3013.249543] ata1.00: status: { DRDY }
[ 3013.249545] ata1.00: failed command: WRITE FPDMA QUEUED
[ 3013.249559] ata1.00: cmd 61/08:08:b8:60:7b/00:00:29:00:00/40 tag 1 ncq 4096 out
[ 3013.249559] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 3013.249562] ata1.00: status: { DRDY }
[ 3013.249564] ata1.00: failed command: WRITE FPDMA QUEUED
[ 3013.249568] ata1.00: cmd 61/08:10:c0:60:7b/00:00:29:00:00/40 tag 2 ncq 4096 out
[ 3013.249568] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 3013.249570] ata1.00: status: { DRDY }
[ 3013.249572] ata1.00: failed command: WRITE FPDMA QUEUED
[ 3013.249576] ata1.00: cmd 61/08:18:c8:60:7b/00:00:29:00:00/40 tag 3 ncq 4096 out
[ 3013.249576] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 3013.249578] ata1.00: status: { DRDY }
[ 3013.249580] ata1.00: failed command: WRITE FPDMA QUEUED
[ 3013.249585] ata1.00: cmd 61/08:20:48:12:d7/00:00:18:00:00/40 tag 4 ncq 4096 out
[ 3013.249585] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 3013.249587] ata1.00: status: { DRDY }
[ 3013.249589] ata1.00: failed command: WRITE FPDMA QUEUED
[ 3013.249593] ata1.00: cmd 61/08:28:28:63:38/00:00:19:00:00/40 tag 5 ncq 4096 out
[ 3013.249593] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 3013.249595] ata1.00: status: { DRDY }
[ 3013.249597] ata1.00: failed command: WRITE FPDMA QUEUED
[ 3013.249601] ata1.00: cmd 61/08:30:28:6f:38/00:00:19:00:00/40 tag 6 ncq 4096 out
[ 3013.249601] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 3013.249603] ata1.00: status: { DRDY }
[ 3013.249605] ata1.00: failed command: WRITE FPDMA QUEUED
[ 3013.249609] ata1.00: cmd 61/08:38:28:98:ae/00:00:25:00:00/40 tag 7 ncq 4096 out
[ 3013.249609] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 3013.249611] ata1.00: status: { DRDY }
[ 3013.249613] ata1.00: failed command: WRITE FPDMA QUEUED
[ 3013.249617] ata1.00: cmd 61/08:40:d8:79:3b/00:00:25:00:00/40 tag 8 ncq 4096 out
[ 3013.249617] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 3013.249619] ata1.00: status: { DRDY }
[ 3013.249621] ata1.00: failed command: WRITE FPDMA QUEUED
[ 3013.249625] ata1.00: cmd 61/08:48:08:98:b6/00:00:18:00:00/40 tag 9 ncq 4096 out
[ 3013.249625] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 3013.249627] ata1.00: status: { DRDY }
[ 3013.249629] ata1.00: failed command: WRITE FPDMA QUEUED
[ 3013.249633] ata1.00: cmd 61/08:50:10:98:36/00:00:19:00:00/40 tag 10 ncq 4096 out
[ 3013.249633] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 3013.249636] ata1.00: status: { DRDY }
[ 3013.249640] ata1: hard resetting link
[ 3013.575549] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 3013.576784] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[ 3013.578334] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[ 3013.578588] ata1.00: configured for UDMA/133
[ 3013.592223] ata1.00: device reported invalid CHS sector 0
[ 3013.592233] ata1.00: device reported invalid CHS sector 0
[ 3013.592238] ata1.00: device reported invalid CHS sector 0
[ 3013.592242] ata1.00: device reported invalid CHS sector 0
[ 3013.592246] ata1.00: device reported invalid CHS sector 0
[ 3013.592250] ata1.00: device reported invalid CHS sector 0
[ 3013.592254] ata1.00: device reported invalid CHS sector 0
[ 3013.592258] ata1.00: device reported invalid CHS sector 0
[ 3013.592263] ata1.00: device reported invalid CHS sector 0
[ 3013.592267] ata1.00: device reported invalid CHS sector 0
[ 3013.592271] ata1.00: device reported invalid CHS sector 0
[ 3013.592302] sd 0:0:0:0: [sda]
[ 3013.592306] Result: hostbyte=0x00 driverbyte=0x08
[ 3013.592310] sd 0:0:0:0: [sda]
[ 3013.592313] Sense Key : 0xb [current] [descriptor]
[ 3013.592320] Descriptor sense data with sense descriptors (in hex):
[ 3013.592323] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 3013.592342] 00 00 00 00
[ 3013.592351] sd 0:0:0:0: [sda]
[ 3013.592353] ASC=0x0 ASCQ=0x0
[ 3013.592358] sd 0:0:0:0: [sda] CDB:
[ 3013.592361] cdb[0]=0x28: 28 00 24 ba b8 78 00 00 08 00
[ 3013.592376] end_request: I/O error, dev sda, sector 616216696
[ 3013.592414] sd 0:0:0:0: [sda]
[ 3013.592417] Result: hostbyte=0x00 driverbyte=0x08
[ 3013.592421] sd 0:0:0:0: [sda]
[ 3013.592423] Sense Key : 0xb [current] [descriptor]
[ 3013.592428] Descriptor sense data with sense descriptors (in hex):
[ 3013.592431] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 3013.592449] 00 00 00 00
[ 3013.592458] sd 0:0:0:0: [sda]
[ 3013.592460] ASC=0x0 ASCQ=0x0
[ 3013.592465] sd 0:0:0:0: [sda] CDB:
[ 3013.592467] cdb[0]=0x2a: 2a 00 29 7b 60 b8 00 00 08 00
[ 3013.592482] end_request: I/O error, dev sda, sector 695951544
[ 3013.592505] sd 0:0:0:0: [sda]
[ 3013.592508] Result: hostbyte=0x00 driverbyte=0x08
[ 3013.592512] sd 0:0:0:0: [sda]
[ 3013.592514] Sense Key : 0xb [current] [descriptor]
[ 3013.592519] Descriptor sense data with sense descriptors (in hex):
[ 3013.592522] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 3013.592540] 00 00 00 00
[ 3013.592549] sd 0:0:0:0: [sda]
[ 3013.592551] ASC=0x0 ASCQ=0x0
[ 3013.592556] sd 0:0:0:0: [sda] CDB:
[ 3013.592558] cdb[0]=0x2a: 2a 00 29 7b 60 c0 00 00 08 00
[ 3013.592572] end_request: I/O error, dev sda, sector 695951552
[ 3013.592583] sd 0:0:0:0: [sda]
[ 3013.592586] Result: hostbyte=0x00 driverbyte=0x08
[ 3013.592589] sd 0:0:0:0: [sda]
[ 3013.592592] Sense Key : 0xb [current] [descriptor]
[ 3013.592597] Descriptor sense data with sense descriptors (in hex):
[ 3013.592599] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 3013.592618] 00 00 00 00
[ 3013.592626] sd 0:0:0:0: [sda]
[ 3013.592628] ASC=0x0 ASCQ=0x0
[ 3013.592632] sd 0:0:0:0: [sda] CDB:
[ 3013.592635] cdb[0]=0x2a: 2a 00 29 7b 60 c8 00 00 08 00
[ 3013.592649] end_request: I/O error, dev sda, sector 695951560
[ 3013.592665] sd 0:0:0:0: [sda]
[ 3013.592668] Result: hostbyte=0x00 driverbyte=0x08
[ 3013.592671] sd 0:0:0:0: [sda]
[ 3013.592673] Sense Key : 0xb [current] [descriptor]
[ 3013.592678] Descriptor sense data with sense descriptors (in hex):
[ 3013.592684] Aborting journal on device dm-0-8.
[ 3013.592701] EXT4-fs error (device dm-0) in ext4_reserve_inode_write:4476: Journal has aborted
[ 3013.592687] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 3013.592723] 00 00 00 00
[ 3013.592729] sd 0:0:0:0: [sda]
[ 3013.592730] ASC=0x0 ASCQ=0x0
[ 3013.592733] sd 0:0:0:0: [sda] CDB:
[ 3013.592735] cdb[0]=0x2a: 2a 00 18 d7 12 48 00 00 08 00
[ 3013.592744] end_request: I/O error, dev sda, sector 416748104
[ 3013.592752] Buffer I/O error on device dm-0, logical block 266057
[ 3013.592760] EXT4-fs warning (device dm-0): ext4_end_bio:250: I/O error writing to inode 5902184 (offset 258048 size 4096 starting block 266057)
[ 3013.592766] sd 0:0:0:0: [sda]
[ 3013.592768] Result: hostbyte=0x00 driverbyte=0x08
[ 3013.592771] sd 0:0:0:0: [sda]
[ 3013.592772] Sense Key : 0xb [current] [descriptor]
[ 3013.592776] Descriptor sense data with sense descriptors (in hex):
[ 3013.592778] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 3013.592790] 00 00 00 00
[ 3013.592795] sd 0:0:0:0: [sda]
[ 3013.592797] ASC=0x0 ASCQ=0x0
[ 3013.592800] sd 0:0:0:0: [sda] CDB:
[ 3013.592801] cdb[0]=0x2a: 2a 00 19 38 63 28 00 00 08 00
[ 3013.592811] end_request: I/O error, dev sda, sector 423125800
[ 3013.592817] Buffer I/O error on device dm-0, logical block 1063269
[ 3013.592822] EXT4-fs warning (device dm-0): ext4_end_bio:250: I/O error writing to inode 5898577 (offset 970752 size 4096 starting block 1063269)
[ 3013.592842] sd 0:0:0:0: [sda]
[ 3013.592845] Result: hostbyte=0x00 driverbyte=0x08
[ 3013.592849] sd 0:0:0:0: [sda]
[ 3013.592851] Sense Key : 0xb [current] [descriptor]
[ 3013.592856] Descriptor sense data with sense descriptors (in hex):
[ 3013.592859] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 3013.592877] 00 00 00 00
[ 3013.592885] sd 0:0:0:0: [sda]
[ 3013.592887] ASC=0x0 ASCQ=0x0
[ 3013.592892] sd 0:0:0:0: [sda] CDB:
[ 3013.592894] cdb[0]=0x2a: 2a 00 19 38 6f 28 00 00 08 00
[ 3013.592908] end_request: I/O error, dev sda, sector 423128872
[ 3013.592915] Buffer I/O error on device dm-0, logical block 1063653
[ 3013.592922] EXT4-fs warning (device dm-0): ext4_end_bio:250: I/O error writing to inode 5902187 (offset 1171456 size 4096 starting block 1063653)
[ 3013.592931] sd 0:0:0:0: [sda]
[ 3013.592934] Result: hostbyte=0x00 driverbyte=0x08
[ 3013.592937] sd 0:0:0:0: [sda]
[ 3013.592940] Sense Key : 0xb [current] [descriptor]
[ 3013.592945] Descriptor sense data with sense descriptors (in hex):
[ 3013.592947] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 3013.592966] 00 00 00 00
[ 3013.592974] sd 0:0:0:0: [sda]
[ 3013.592976] ASC=0x0 ASCQ=0x0
[ 3013.592980] sd 0:0:0:0: [sda] CDB:
[ 3013.592983] cdb[0]=0x2a: 2a 00 25 ae 98 28 00 00 08 00
[ 3013.592997] end_request: I/O error, dev sda, sector 632199208
[ 3013.593006] Buffer I/O error on device dm-0, logical block 27197445
[ 3013.593018] EXT4-fs warning (device dm-0): ext4_end_bio:250: I/O error writing to inode 6425165 (offset 151552 size 4096 starting block 27197445)
[ 3013.593028] sd 0:0:0:0: [sda]
[ 3013.593031] Result: hostbyte=0x00 driverbyte=0x08
[ 3013.593034] sd 0:0:0:0: [sda]
[ 3013.593037] Sense Key : 0xb [current] [descriptor]
[ 3013.593042] Descriptor sense data with sense descriptors (in hex):
[ 3013.593045] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 3013.593063] 00 00 00 00
[ 3013.593071] sd 0:0:0:0: [sda]
[ 3013.593073] ASC=0x0 ASCQ=0x0
[ 3013.593078] sd 0:0:0:0: [sda] CDB:
[ 3013.593085] EXT4-fs error (device dm-0) in ext4_reserve_inode_write:4476: Journal has aborted
[ 3013.593089] cdb[0]=0x2a: 2a 00 25 3b 79 d8 00 00 08 00
[ 3013.593104] end_request: I/O error, dev sda, sector 624654808
[ 3013.593111] Buffer I/O error on device dm-0, logical block 26254395
[ 3013.593115] lost page write due to I/O error on dm-0
[ 3013.593126] sd 0:0:0:0: [sda]
[ 3013.593129] Result: hostbyte=0x00 driverbyte=0x08
[ 3013.593132] sd 0:0:0:0: [sda]
[ 3013.593135] Sense Key : 0xb [current] [descriptor]
[ 3013.593140] Descriptor sense data with sense descriptors (in hex):
[ 3013.593142] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 3013.593161] 00 00 00 00
[ 3013.593169] sd 0:0:0:0: [sda]
[ 3013.593171] ASC=0x0 ASCQ=0x0
[ 3013.593175] sd 0:0:0:0: [sda] CDB:
[ 3013.593178] cdb[0]=0x2a: 2a 00 18 b6 98 08 00 00 08 00
[ 3013.593192] end_request: I/O error, dev sda, sector 414619656
[ 3013.593198] Buffer I/O error on device dm-0, logical block 1
[ 3013.593201] lost page write due to I/O error on dm-0
[ 3013.593211] sd 0:0:0:0: [sda]
[ 3013.593213] Result: hostbyte=0x00 driverbyte=0x08
[ 3013.593217] sd 0:0:0:0: [sda]
[ 3013.593219] Sense Key : 0xb [current] [descriptor]
[ 3013.593224] Descriptor sense data with sense descriptors (in hex):
[ 3013.593227] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 3013.593245] 00 00 00 00
[ 3013.593253] sd 0:0:0:0: [sda]
[ 3013.593256] ASC=0x0 ASCQ=0x0
[ 3013.593260] sd 0:0:0:0: [sda] CDB:
[ 3013.593262] cdb[0]=0x2a: 2a 00 19 36 98 10 00 00 08 00
[ 3013.593277] end_request: I/O error, dev sda, sector 423008272
[ 3013.593283] Buffer I/O error on device dm-0, logical block 1048578
[ 3013.593286] lost page write due to I/O error on dm-0
[ 3013.593298] ata1: EH complete
[ 3013.595707] EXT4-fs error (device dm-0) in ext4_dirty_inode:4603: Journal has aborted
[ 3013.596581] EXT4-fs error (device dm-0): ext4_journal_start_sb:370: Detected aborted journal
[ 3013.596591] EXT4-fs (dm-0): Remounting filesystem read-only
[ 3020.421558] journal commit I/O error
[ 3020.421570] journal commit I/O error
[ 3020.421574] journal commit I/O error
[ 3020.421578] journal commit I/O error
[ 3020.421581] journal commit I/O error
[ 3147.052191] ata1.00: exception Emask 0x0 SAct 0xf SErr 0x0 action 0x6 frozen
[ 3147.052197] ata1.00: failed command: READ FPDMA QUEUED
[ 3147.052209] ata1.00: cmd 60/50:00:d0:48:99/00:00:1c:00:00/40 tag 0 ncq 40960 in
[ 3147.052209] res 40/00:00:00:4f:c2/00:00:00:00:00/40 Emask 0x4 (timeout)
[ 3147.052212] ata1.00: status: { DRDY }
[ 3147.052213] ata1.00: failed command: READ FPDMA QUEUED
[ 3147.052218] ata1.00: cmd 60/18:08:28:49:99/00:00:1c:00:00/40 tag 1 ncq 12288 in
[ 3147.052218] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 3147.052220] ata1.00: status: { DRDY }
[ 3147.052221] ata1.00: failed command: READ FPDMA QUEUED
[ 3147.052226] ata1.00: cmd 60/88:10:48:49:99/00:00:1c:00:00/40 tag 2 ncq 69632 in
[ 3147.052226] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 3147.052228] ata1.00: status: { DRDY }
[ 3147.052229] ata1.00: failed command: READ FPDMA QUEUED
[ 3147.052234] ata1.00: cmd 60/20:18:00:a4:ba/00:00:24:00:00/40 tag 3 ncq 16384 in
[ 3147.052234] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 3147.052236] ata1.00: status: { DRDY }
[ 3147.052239] ata1: hard resetting link
[ 3147.378368] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 3148.066853] ata1.00: ACPI cmd ef/5a:00:00:00:00:a0 (SET FEATURES) succeeded
[ 3148.069139] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[ 3148.069393] ata1.00: configured for UDMA/133
[ 3148.080059] ata1.00: device reported invalid CHS sector 0
[ 3148.080066] ata1.00: device reported invalid CHS sector 0
[ 3148.080071] ata1.00: device reported invalid CHS sector 0
[ 3148.080075] ata1.00: device reported invalid CHS sector 0
[ 3148.080112] sd 0:0:0:0: [sda]
[ 3148.080114] Result: hostbyte=0x00 driverbyte=0x08
[ 3148.080117] sd 0:0:0:0: [sda]
[ 3148.080118] Sense Key : 0xb [current] [descriptor]
[ 3148.080123] Descriptor sense data with sense descriptors (in hex):
[ 3148.080125] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 3148.080136] 00 00 00 00
[ 3148.080140] sd 0:0:0:0: [sda]
[ 3148.080142] ASC=0x0 ASCQ=0x0
[ 3148.080145] sd 0:0:0:0: [sda] CDB:
[ 3148.080146] cdb[0]=0x28: 28 00 1c 99 48 d0 00 00 50 00
[ 3148.080156] end_request: I/O error, dev sda, sector 479807696
[ 3148.080170] sd 0:0:0:0: [sda]
[ 3148.080171] Result: hostbyte=0x00 driverbyte=0x08
[ 3148.080173] sd 0:0:0:0: [sda]
[ 3148.080175] Sense Key : 0xb [current] [descriptor]
[ 3148.080178] Descriptor sense data with sense descriptors (in hex):
[ 3148.080180] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 3148.080190] 00 00 00 00
[ 3148.080195] sd 0:0:0:0: [sda]
[ 3148.080196] ASC=0x0 ASCQ=0x0
[ 3148.080199] sd 0:0:0:0: [sda] CDB:
[ 3148.080200] cdb[0]=0x28: 28 00 1c 99 49 28 00 00 18 00
[ 3148.080209] end_request: I/O error, dev sda, sector 479807784
[ 3148.080216] sd 0:0:0:0: [sda]
[ 3148.080218] Result: hostbyte=0x00 driverbyte=0x08
[ 3148.080220] sd 0:0:0:0: [sda]
[ 3148.080221] Sense Key : 0xb [current] [descriptor]
[ 3148.080224] Descriptor sense data with sense descriptors (in hex):
[ 3148.080225] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 3148.080236] 00 00 00 00
[ 3148.080241] sd 0:0:0:0: [sda]
[ 3148.080242] ASC=0x0 ASCQ=0x0
[ 3148.080245] sd 0:0:0:0: [sda] CDB:
[ 3148.080246] cdb[0]=0x28: 28 00 1c 99 49 48 00 00 88 00
[ 3148.080254] end_request: I/O error, dev sda, sector 479807816
[ 3148.080267] sd 0:0:0:0: [sda]
[ 3148.080268] Result: hostbyte=0x00 driverbyte=0x08
[ 3148.080270] sd 0:0:0:0: [sda]
[ 3148.080272] Sense Key : 0xb [current] [descriptor]
[ 3148.080274] Descriptor sense data with sense descriptors (in hex):
[ 3148.080276] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 3148.080287] 00 00 00 00
[ 3148.080291] sd 0:0:0:0: [sda]
[ 3148.080293] ASC=0x0 ASCQ=0x0
[ 3148.080295] sd 0:0:0:0: [sda] CDB:
[ 3148.080296] cdb[0]=0x28: 28 00 24 ba a4 00 00 00 20 00
[ 3148.080305] end_request: I/O error, dev sda, sector 616211456
[ 3148.080315] ata1: EH complete
I have experimented, and found that if I turn off NCQ on the kernel command line in my bootloader (libata.force=noncq), that it takes longer before the problem occurs. Though, if I write enough to the second drive, it does still happen after a while, just greatly reduced its chances of happening.
Is it possible that the old drive (sdb) is causing the problem? I noticed that it is much noisier than I remember when the drive head moves around.
Another curiosity while I was trying to duplicate the problem:
- I start a large file copy from sda -> sdb
- At the same time in another terminal, I do "find / -print"
- When I hear the drive 2 head moving, it pauses the output of the "find" command.
Every time I hear the head move, I see the find output pause. Its almost like the drive seek on drive 2 causes the whole Sata controller to pause while the head moves. Very odd!
Anyone have any ideas? I think the next thing I will try is borrow a drive from another machine, and do the big write to it to see if I get the same results.
If it is of any help, here is some more info on the laptop:
lspci:
00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09)
00:01.0 PCI bridge: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port (rev 09)
00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04)
00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 05)
00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 05)
00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b5)
00:1c.2 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 3 (rev b5)
00:1c.3 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 (rev b5)
00:1c.5 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 6 (rev b5)
00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 05)
00:1f.0 ISA bridge: Intel Corporation HM67 Express Chipset Family LPC Controller (rev 05)
00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller (rev 05)
00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 05)
01:00.0 VGA compatible controller: NVIDIA Corporation Device 1251 (rev a1)
01:00.1 Audio device: NVIDIA Corporation GF116 High Definition Audio Controller (rev a1)
07:00.0 Ethernet controller: Atheros Communications Inc. AR8151 v2.0 Gigabit Ethernet (rev c0)
0d:00.0 Network controller: Intel Corporation Centrino Advanced-N + WiMAX 6250 (rev 5e)
13:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5209 PCI Express Card Reader (rev 01)
13:00.1 SD Host controller: Realtek Semiconductor Co., Ltd. RTS5209 PCI Express Card Reader (rev 01)
19:00.0 USB controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 04)
cat /proc/interrupts:
CPU0 CPU1 CPU2 CPU3 CPU4 CPU5 CPU6 CPU7
0: 50 0 0 0 0 0 0 0 IO-APIC-edge timer
1: 958 0 0 0 0 0 0 0 IO-APIC-edge i8042
8: 1 0 0 0 0 0 0 0 IO-APIC-edge rtc0
9: 1675 0 0 0 0 0 0 0 IO-APIC-fasteoi acpi
12: 12257 0 0 0 0 0 0 0 IO-APIC-edge i8042
16: 24769 0 0 0 0 0 0 0 IO-APIC-fasteoi ehci_hcd:usb1, mmc0, nvidia
17: 142 0 0 0 0 0 0 0 IO-APIC-fasteoi snd_hda_intel
19: 0 0 0 0 0 0 0 0 IO-APIC-fasteoi rts_pstor
23: 1937 0 0 0 0 0 0 0 IO-APIC-fasteoi ehci_hcd:usb4
41: 1 0 0 0 0 0 0 0 PCI-MSI-edge xhci_hcd
42: 0 0 0 0 0 0 0 0 PCI-MSI-edge xhci_hcd
43: 0 0 0 0 0 0 0 0 PCI-MSI-edge xhci_hcd
44: 0 0 0 0 0 0 0 0 PCI-MSI-edge xhci_hcd
45: 0 0 0 0 0 0 0 0 PCI-MSI-edge xhci_hcd
46: 0 0 0 0 0 0 0 0 PCI-MSI-edge xhci_hcd
47: 0 0 0 0 0 0 0 0 PCI-MSI-edge xhci_hcd
48: 0 0 0 0 0 0 0 0 PCI-MSI-edge xhci_hcd
49: 19406 0 0 0 0 0 0 0 PCI-MSI-edge iwlwifi
50: 36099 0 0 0 0 0 0 0 PCI-MSI-edge ahci
51: 14 0 0 0 0 0 0 0 PCI-MSI-edge mei
52: 386378 0 0 0 0 0 0 0 PCI-MSI-edge snd_hda_intel
53: 56803 0 0 0 0 0 0 0 PCI-MSI-edge eth0
NMI: 34 5 19 5 18 4 13 4 Non-maskable interrupts
LOC: 77964 17705 161241 14302 187823 16150 56845 12750 Local timer interrupts
SPU: 0 0 0 0 0 0 0 0 Spurious interrupts
PMI: 34 5 19 5 18 4 13 4 Performance monitoring interrupts
IWI: 0 0 0 0 0 0 0 0 IRQ work interrupts
RTR: 7 0 0 0 0 0 0 0 APIC ICR read retries
RES: 13721 7023 304 110 175 110 213 123 Rescheduling interrupts
CAL: 6941 7677 2774 7670 5804 7568 7655 7673 Function call interrupts
TLB: 366 545 268 179 310 272 212 166 TLB shootdowns
TRM: 0 0 0 0 0 0 0 0 Thermal event interrupts
THR: 0 0 0 0 0 0 0 0 Threshold APIC interrupts
MCE: 0 0 0 0 0 0 0 0 Machine check exceptions
MCP: 29 29 29 29 29 29 29 29 Machine check polls
ERR: 0
MIS: 0
smartctl --all /dev/sda
smartctl 5.43 2012-06-30 r3573 [x86_64-linux-3.5.3-1-ARCH] (local build)
Copyright (C) 2002-12 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF INFORMATION SECTION ===
Device Model: ST9500423AS
Serial Number: 5WS354LM
LU WWN Device Id: 5 000c50 044bb741b
Firmware Version: 0005DEM1
User Capacity: 500,107,862,016 bytes [500 GB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: 8
ATA Standard is: ATA-8-ACS revision 4
Local Time is: Thu Sep 13 15:26:14 2012 CDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 0) seconds.
Offline data collection
capabilities: (0x73) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
No Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 105) minutes.
Conveyance self-test routine
recommended polling time: ( 3) minutes.
SCT capabilities: (0x303f) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 113 099 006 Pre-fail Always - 54715920
3 Spin_Up_Time 0x0003 098 098 085 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 099 099 020 Old_age Always - 1114
5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0
7 Seek_Error_Rate 0x000f 069 060 030 Pre-fail Always - 10214892
9 Power_On_Hours 0x0032 098 098 000 Old_age Always - 2030
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 559
184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0
187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
188 Command_Timeout 0x0032 100 098 000 Old_age Always - 8590065667
189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0
190 Airflow_Temperature_Cel 0x0022 053 049 045 Old_age Always - 47 (Min/Max 47/51)
191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 17
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 871
193 Load_Cycle_Count 0x0032 039 039 000 Old_age Always - 122293
194 Temperature_Celsius 0x0022 047 051 000 Old_age Always - 47 (0 17 0 0 0)
195 Hardware_ECC_Recovered 0x001a 113 099 000 Old_age Always - 54715920
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 67229123085518
241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 1947733828
242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 2798982459
254 Free_Fall_Sensor 0x0032 001 001 000 Old_age Always - 899
SMART Error Log Version: 1
ATA Error Count: 8 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 8 occurred at disk power-on lifetime: 2017 hours (84 days + 1 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
04 71 09 a9 00 80 e0 Device Fault; Error: ABRT
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
a1 00 00 00 00 00 a0 00 05:21:04.438 IDENTIFY PACKET DEVICE
ec 00 00 00 00 00 a0 00 05:21:04.438 IDENTIFY DEVICE
00 00 00 00 00 00 00 ff 05:21:04.124 NOP [Abort queued commands]
a1 00 00 00 00 00 a0 00 05:20:59.118 IDENTIFY PACKET DEVICE
ec 00 00 00 00 00 a0 00 05:20:59.118 IDENTIFY DEVICE
Error 7 occurred at disk power-on lifetime: 2017 hours (84 days + 1 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
04 71 09 a9 00 80 e0
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
ec 00 00 00 00 00 a0 00 05:21:04.438 IDENTIFY DEVICE
00 00 00 00 00 00 00 ff 05:21:04.124 NOP [Abort queued commands]
a1 00 00 00 00 00 a0 00 05:20:59.118 IDENTIFY PACKET DEVICE
ec 00 00 00 00 00 a0 00 05:20:59.118 IDENTIFY DEVICE
00 00 00 00 00 00 00 ff 05:20:58.805 NOP [Abort queued commands]
Error 6 occurred at disk power-on lifetime: 2017 hours (84 days + 1 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
04 71 09 a9 00 80 e0 Device Fault; Error: ABRT
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
a1 00 00 00 00 00 a0 00 05:20:59.118 IDENTIFY PACKET DEVICE
ec 00 00 00 00 00 a0 00 05:20:59.118 IDENTIFY DEVICE
00 00 00 00 00 00 00 ff 05:20:58.805 NOP [Abort queued commands]
a1 00 00 00 00 00 a0 00 05:20:58.761 IDENTIFY PACKET DEVICE
ec 00 00 00 00 00 a0 00 05:20:58.725 IDENTIFY DEVICE
Error 5 occurred at disk power-on lifetime: 2017 hours (84 days + 1 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
04 71 09 a9 00 80 e0
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
ec 00 00 00 00 00 a0 00 05:20:59.118 IDENTIFY DEVICE
00 00 00 00 00 00 00 ff 05:20:58.805 NOP [Abort queued commands]
a1 00 00 00 00 00 a0 00 05:20:58.761 IDENTIFY PACKET DEVICE
ec 00 00 00 00 00 a0 00 05:20:58.725 IDENTIFY DEVICE
2f 00 01 10 00 00 a0 00 05:20:58.724 READ LOG EXT
Error 4 occurred at disk power-on lifetime: 2017 hours (84 days + 1 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
04 71 09 a9 00 80 e0 Device Fault; Error: ABRT
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
a1 00 00 00 00 00 a0 00 05:20:58.761 IDENTIFY PACKET DEVICE
ec 00 00 00 00 00 a0 00 05:20:58.725 IDENTIFY DEVICE
2f 00 01 10 00 00 a0 00 05:20:58.724 READ LOG EXT
61 00 08 ff ff ff 4f 00 05:20:58.724 WRITE FPDMA QUEUED
61 00 08 ff ff ff 4f 00 05:20:58.724 WRITE FPDMA QUEUED
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed without error 00% 6 -
# 2 Short offline Aborted by host 90% 1 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
smartctl --all /dev/sdb
smartctl 5.43 2012-06-30 r3573 [x86_64-linux-3.5.3-1-ARCH] (local build)
Copyright (C) 2002-12 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF INFORMATION SECTION ===
Model Family: SAMSUNG SpinPoint M6
Device Model: SAMSUNG HM320JI
Serial Number: S16LJF0QB02815
LU WWN Device Id: 5 0f0000 001202815
Firmware Version: 2SS00_01
User Capacity: 320,072,933,376 bytes [320 GB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: 7
ATA Standard is: ATA/ATAPI-7 T13 1532D revision 0
Local Time is: Thu Sep 13 15:27:10 2012 CDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 110) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 110) minutes.
SCT capabilities: (0x003f) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 100 100 051 Pre-fail Always - 0
3 Spin_Up_Time 0x0007 252 252 025 Pre-fail Always - 2562
4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 810
5 Reallocated_Sector_Ct 0x0033 252 252 010 Pre-fail Always - 0
7 Seek_Error_Rate 0x000e 252 252 051 Old_age Always - 0
8 Seek_Time_Performance 0x0024 252 252 015 Old_age Offline - 0
9 Power_On_Hours 0x0032 092 092 000 Old_age Always - 4842
10 Spin_Retry_Count 0x0032 252 252 051 Old_age Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 440
191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 154
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 71
194 Temperature_Celsius 0x0022 073 073 000 Old_age Always - 55 (Min/Max 17/55)
195 Hardware_ECC_Recovered 0x001a 100 100 000 Old_age Always - 1
196 Reallocated_Event_Count 0x0032 252 252 000 Old_age Always - 0
197 Current_Pending_Sector 0x0012 252 252 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0030 252 252 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0036 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x000a 100 100 000 Old_age Always - 0
201 Soft_Read_Error_Rate 0x0032 252 252 000 Old_age Always - 0
223 Load_Retry_Count 0x0032 100 100 000 Old_age Always - 534
225 Load_Cycle_Count 0x0032 077 077 000 Old_age Always - 236803
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
Note: selective self-test log revision number (0) not 1 implies that no selective self-test has ever been run
SMART Selective self-test log data structure revision number 0
Note: revision number not 1 implies that no selective self-test has ever been run
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
Last edited by johni (2012-09-16 00:46:54)

It appears my drive one really is failing. It was the first drive and not the second making the loud head seek sound. I borrowed another drive from a friend, and copied my drive one to it. No problems with the new drive in place.

Problem with i915 Intel driver panic..

Hello,
I just recently reinstalled Arch on my laptop. I have a problem with my laptop. When I went to install the Nvidia Optimus stuff and configure my Xorg.conf I was met with problems with the Intel Driver timing out. When I boot up I get the normal post screen, then grub, I then go to see the GDM login and instead of getting it I just get a black screen. When I remove the /etc/X11/xorg.conf.d/10-monitor.conf I can boot into Gnome Shell, else I have to switch run levels and login that way. I have every package up-to-date. And I haven't seen an /var/log/Xorg.0.log either else I would have posted it. One other thing is I have added my user account to the Bumblebee account. One other thing is when I move my web browser around my video flickers.. Any help I can receive with this would be greatly appreciated.
uname -a
Linux tux 3.17.1-1-ARCH #1 SMP PREEMPT Wed Oct 15 15:04:35 CEST 2014 x86_64 GNU/Linux
pacman -q xf86-video-intel:
xf86-video-intel 2.99.916-3
pacman -Q xorg-server
xorg-server 1.16.1-1
pacman -Q primus
primus 20131226-1
pacman -Q mesa
mesa 10.3.1-1
pacman -Q lib32-primus
lib32-primus 20131226-1
pacman -Q bbswitch
bbswitch 0.8-18
pacman -Q gdm
gdm 3.14.1-1
pacman -q systemd
systemd 216-3
dmesg | grep i915
[ 1.982842] i915 0000:00:02.0: irq 36 for MSI/MSI-X
[ 2.099424] [drm] GMBUS [i915 gmbus vga] timed out, falling back to bit banging on pin 2
[ 2.127859] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 2.127862] i915 0000:00:02.0: registered panic notifier
[ 2.147795] [drm] Initialized i915 1.6.0 20140725 for 0000:00:02.0 on minor 0
/etc/X11/xorg.conf.d/20-intel.conf
Section "Device"
Identifier "Intel"
Driver "intel"
Option "AccelMethod" "sna"
Option "TearFree" "true"
Option "monitor-LVDS" "Monitor0"
BusID "PCI:0:2:0"
EndSection
/etc/X11/xorg.conf.d/10-keyboard.conf
Section "InputClass"
Identifier "Keyboard0"
MatchIsKeyboard "on"
Option "XkbLayout" "us"
Option "XkbModel" "pc104"
Option "XkbVariant" ",qwerty"
EndSection
/etc/X11/xorg.conf.d/50-synaptic.conf
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
/etc/X11/xorg.conf.d/10-monitor.conf
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection
Section "Monitor"
Identifier "Monitor0"
HorizSync 28.0 - 33.0
VertRefresh 43.0 - 72.0
Option "DPMS"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Intel"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
EndSubSection
EndSection
sudo lspci -v
00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) (prog-if 00 [VGA controller])
Subsystem: Dell Device 04c8
Flags: bus master, fast devsel, latency 0, IRQ 36
Memory at d1400000 (64-bit, non-prefetchable) [size=4M]
Memory at c0000000 (64-bit, prefetchable) [size=256M]
I/O ports at 7000 [size=64]
Expansion ROM at <unassigned> [disabled]
Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit-
Capabilities: [d0] Power Management version 2
Capabilities: [a4] PCI Advanced Features
Kernel driver in use: i915
Kernel modules: i915
01:00.0 VGA compatible controller: NVIDIA Corporation GF108M [GeForce GT 540M] (rev a1) (prog-if 00 [VGA controller])
Subsystem: Dell Device 04c8
Flags: bus master, fast devsel, latency 0, IRQ 7
Memory at d0000000 (32-bit, non-prefetchable) [size=16M]
Memory at a0000000 (64-bit, prefetchable) [size=256M]
Memory at b0000000 (64-bit, prefetchable) [size=32M]
I/O ports at 6000 [disabled] [size=128]
Expansion ROM at d1000000 [disabled] [size=512K]
Capabilities: [60] Power Management version 3
Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+
Capabilities: [78] Express Endpoint, MSI 00
Capabilities: [b4] Vendor Specific Information: Len=14 <?>
Capabilities: [100] Virtual Channel
Capabilities: [128] Power Budgeting <?>
Capabilities: [600] Vendor Specific Information: ID=0001 Rev=1 Len=024 <?>
Kernel modules: nouveau, nvidia
xrandr -q
[adramalech@tux log]$ xrandr
Screen 0: minimum 8 x 8, current 1366 x 768, maximum 32767 x 32767
LVDS1 connected primary 1366x768+0+0 (normal left inverted right x axis y axis) 256mm x 144mm
1366x768 60.05*+
1024x768 60.00
800x600 60.32 56.25
640x480 59.94
VGA1 disconnected (normal left inverted right x axis y axis)
VIRTUAL1 disconnected (normal left inverted right x axis y axis)
cat /proc/bus/input/devices
I: Bus=0011 Vendor=0001 Product=0001 Version=ab41
N: Name="AT Translated Set 2 keyboard"
P: Phys=isa0060/serio0/input0
S: Sysfs=/devices/platform/i8042/serio0/input/input0
U: Uniq=
H: Handlers=sysrq kbd event0
B: PROP=0
B: EV=120013
B: KEY=402000000 380307af800d001 feffffdfffefffff fffffffffffffffe
B: MSC=10
B: LED=7
I: Bus=0019 Vendor=0000 Product=0005 Version=0000
N: Name="Lid Switch"
P: Phys=PNP0C0D/button/input0
S: Sysfs=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
U: Uniq=
H: Handlers=event1
B: PROP=0
B: EV=21
B: SW=1
I: Bus=0019 Vendor=0000 Product=0001 Version=0000
N: Name="Power Button"
P: Phys=LNXPWRBN/button/input0
S: Sysfs=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
U: Uniq=
H: Handlers=kbd event2
B: PROP=0
B: EV=3
B: KEY=10000000000000 0
I: Bus=0010 Vendor=001f Product=0001 Version=0100
N: Name="PC Speaker"
P: Phys=isa0061/input0
S: Sysfs=/devices/platform/pcspkr/input/input4
U: Uniq=
H: Handlers=kbd event3
B: PROP=0
B: EV=40001
B: SND=6
I: Bus=0001 Vendor=10ec Product=0665 Version=0001
N: Name="HDA Digital PCBeep"
P: Phys=card0/codec#0/beep0
S: Sysfs=/devices/pci0000:00/0000:00:1b.0/sound/card0/hdaudioC0D0/input6
U: Uniq=
H: Handlers=kbd event4
B: PROP=0
B: EV=40001
B: SND=6
I: Bus=0000 Vendor=0000 Product=0000 Version=0000
N: Name="HDA Intel PCH Mic"
P: Phys=ALSA
S: Sysfs=/devices/pci0000:00/0000:00:1b.0/sound/card0/input7
U: Uniq=
H: Handlers=event5
B: PROP=0
B: EV=21
B: SW=10
I: Bus=0000 Vendor=0000 Product=0000 Version=0000
N: Name="HDA Intel PCH Headphone"
P: Phys=ALSA
S: Sysfs=/devices/pci0000:00/0000:00:1b.0/sound/card0/input8
U: Uniq=
H: Handlers=event6
B: PROP=0
B: EV=21
B: SW=4
I: Bus=0000 Vendor=0000 Product=0000 Version=0000
N: Name="HDA Intel PCH Headphone"
P: Phys=ALSA
S: Sysfs=/devices/pci0000:00/0000:00:1b.0/sound/card0/input9
U: Uniq=
H: Handlers=event7
B: PROP=0
B: EV=21
B: SW=4
I: Bus=0019 Vendor=0000 Product=0000 Version=0000
N: Name="Dell WMI hotkeys"
P: Phys=wmi/input0
S: Sysfs=/devices/virtual/input/input10
U: Uniq=
H: Handlers=kbd rfkill event8
B: PROP=0
B: EV=13
B: KEY=1500b00000000 200300000 0 0
B: MSC=10
I: Bus=0019 Vendor=0000 Product=0006 Version=0000
N: Name="Video Bus"
P: Phys=LNXVIDEO/video/input0
S: Sysfs=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:2f/LNXVIDEO:00/input/input11
U: Uniq=
H: Handlers=kbd event9
B: PROP=0
B: EV=3
B: KEY=3e000b00000000 0 0 0
I: Bus=0019 Vendor=0000 Product=0006 Version=0000
N: Name="Video Bus"
P: Phys=LNXVIDEO/video/input0
S: Sysfs=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input12
U: Uniq=
H: Handlers=kbd event10
B: PROP=0
B: EV=3
B: KEY=3e000b00000000 0 0 0
I: Bus=0003 Vendor=0c45 Product=6430 Version=1208
N: Name="Laptop_Integrated_Webcam_2M"
P: Phys=usb-0000:00:1d.0-1.4/button
S: Sysfs=/devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input13
U: Uniq=
H: Handlers=kbd event11
B: PROP=0
B: EV=3
B: KEY=100000 0 0 0
I: Bus=0011 Vendor=0002 Product=0007 Version=01b1
N: Name="SynPS/2 Synaptics TouchPad"
P: Phys=isa0060/serio1/input0
S: Sysfs=/devices/platform/i8042/serio1/input/input5
U: Uniq=
H: Handlers=event12 mouse0
B: PROP=9
B: EV=b
B: KEY=6420 30000 0 0 0 0
B: ABS=260800011000003
glxinfo | grep OpenGL
OpenGL vendor string: Intel Open Source Technology Center
OpenGL renderer string: Mesa DRI Intel(R) Sandybridge Mobile
OpenGL core profile version string: 3.1 (Core Profile) Mesa 10.3.1
OpenGL core profile shading language version string: 1.40
OpenGL core profile context flags: (none)
OpenGL core profile extensions:
OpenGL version string: 3.0 Mesa 10.3.1
OpenGL shading language version string: 1.30
OpenGL context flags: (none)
OpenGL extensions:
OpenGL ES profile version string: OpenGL ES 3.0 Mesa 10.3.1
OpenGL ES profile shading language version string: OpenGL ES GLSL ES 3.0
OpenGL ES profile extensions:
sudo glxgears -info
Running synchronized to the vertical refresh. The framerate should be
approximately the same as the monitor refresh rate.
GL_RENDERER = Mesa DRI Intel(R) Sandybridge Mobile
GL_VERSION = 3.0 Mesa 10.3.1
GL_VENDOR = Intel Open Source Technology Center
GL_EXTENSIONS = GL_ARB_multisample GL_EXT_abgr GL_EXT_bgra GL_EXT_blend_color GL_EXT_blend_minmax GL_EXT_blend_subtract GL_EXT_copy_texture GL_EXT_polygon_offset GL_EXT_subtexture GL_EXT_texture_object GL_EXT_vertex_array GL_EXT_compiled_vertex_array GL_EXT_texture GL_EXT_texture3D GL_IBM_rasterpos_clip GL_ARB_point_parameters GL_EXT_draw_range_elements GL_EXT_packed_pixels GL_EXT_point_parameters GL_EXT_rescale_normal GL_EXT_separate_specular_color GL_EXT_texture_edge_clamp GL_SGIS_generate_mipmap GL_SGIS_texture_border_clamp GL_SGIS_texture_edge_clamp GL_SGIS_texture_lod GL_ARB_framebuffer_sRGB GL_ARB_multitexture GL_EXT_framebuffer_sRGB GL_IBM_multimode_draw_arrays GL_IBM_texture_mirrored_repeat GL_3DFX_texture_compression_FXT1 GL_ARB_texture_cube_map GL_ARB_texture_env_add GL_ARB_transpose_matrix GL_EXT_blend_func_separate GL_EXT_fog_coord GL_EXT_multi_draw_arrays GL_EXT_secondary_color GL_EXT_texture_env_add GL_EXT_texture_filter_anisotropic GL_EXT_texture_lod_bias GL_INGR_blend_func_separate GL_NV_blend_square GL_NV_light_max_exponent GL_NV_texgen_reflection GL_NV_texture_env_combine4 GL_S3_s3tc GL_SUN_multi_draw_arrays GL_ARB_texture_border_clamp GL_ARB_texture_compression GL_EXT_framebuffer_object GL_EXT_texture_compression_s3tc GL_EXT_texture_env_combine GL_EXT_texture_env_dot3 GL_MESA_window_pos GL_NV_packed_depth_stencil GL_NV_texture_rectangle GL_ARB_depth_texture GL_ARB_occlusion_query GL_ARB_shadow GL_ARB_texture_env_combine GL_ARB_texture_env_crossbar GL_ARB_texture_env_dot3 GL_ARB_texture_mirrored_repeat GL_ARB_window_pos GL_EXT_stencil_two_side GL_EXT_texture_cube_map GL_NV_depth_clamp GL_APPLE_packed_pixels GL_APPLE_vertex_array_object GL_ARB_draw_buffers GL_ARB_fragment_program GL_ARB_fragment_shader GL_ARB_shader_objects GL_ARB_vertex_program GL_ARB_vertex_shader GL_ATI_draw_buffers GL_ATI_texture_env_combine3 GL_ATI_texture_float GL_EXT_shadow_funcs GL_EXT_stencil_wrap GL_MESA_pack_invert GL_NV_primitive_restart GL_ARB_depth_clamp GL_ARB_fragment_program_shadow GL_ARB_half_float_pixel GL_ARB_occlusion_query2 GL_ARB_point_sprite GL_ARB_shading_language_100 GL_ARB_sync GL_ARB_texture_non_power_of_two GL_ARB_vertex_buffer_object GL_ATI_blend_equation_separate GL_EXT_blend_equation_separate GL_OES_read_format GL_ARB_color_buffer_float GL_ARB_pixel_buffer_object GL_ARB_texture_compression_rgtc GL_ARB_texture_float GL_ARB_texture_rectangle GL_EXT_packed_float GL_EXT_pixel_buffer_object GL_EXT_texture_compression_dxt1 GL_EXT_texture_compression_rgtc GL_EXT_texture_rectangle GL_EXT_texture_sRGB GL_EXT_texture_shared_exponent GL_ARB_framebuffer_object GL_EXT_framebuffer_blit GL_EXT_framebuffer_multisample GL_EXT_packed_depth_stencil GL_APPLE_object_purgeable GL_ARB_vertex_array_object GL_ATI_separate_stencil GL_EXT_draw_buffers2 GL_EXT_draw_instanced GL_EXT_gpu_program_parameters GL_EXT_texture_array GL_EXT_texture_integer GL_EXT_texture_sRGB_decode GL_EXT_timer_query GL_OES_EGL_image GL_AMD_performance_monitor GL_ARB_copy_buffer GL_ARB_depth_buffer_float GL_ARB_draw_instanced GL_ARB_half_float_vertex GL_ARB_instanced_arrays GL_ARB_map_buffer_range GL_ARB_texture_rg GL_ARB_texture_swizzle GL_ARB_vertex_array_bgra GL_EXT_texture_swizzle GL_EXT_vertex_array_bgra GL_NV_conditional_render GL_AMD_draw_buffers_blend GL_AMD_seamless_cubemap_per_texture GL_ARB_ES2_compatibility GL_ARB_blend_func_extended GL_ARB_debug_output GL_ARB_draw_buffers_blend GL_ARB_draw_elements_base_vertex GL_ARB_explicit_attrib_location GL_ARB_fragment_coord_conventions GL_ARB_provoking_vertex GL_ARB_sample_shading GL_ARB_sampler_objects GL_ARB_seamless_cube_map GL_ARB_shader_texture_lod GL_ARB_texture_cube_map_array GL_ARB_texture_gather GL_ARB_texture_multisample GL_ARB_texture_query_lod GL_ARB_texture_rgb10_a2ui GL_ARB_uniform_buffer_object GL_ARB_vertex_type_2_10_10_10_rev GL_EXT_provoking_vertex GL_EXT_texture_snorm GL_MESA_texture_signed_rgba GL_ARB_get_program_binary GL_ARB_robustness GL_ARB_separate_shader_objects GL_ARB_shader_bit_encoding GL_ARB_timer_query GL_ANGLE_texture_compression_dxt3 GL_ANGLE_texture_compression_dxt5 GL_ARB_compressed_texture_pixel_storage GL_ARB_internalformat_query GL_ARB_map_buffer_alignment GL_ARB_shading_language_420pack GL_ARB_shading_language_packing GL_ARB_texture_storage GL_EXT_framebuffer_multisample_blit_scaled GL_EXT_transform_feedback GL_AMD_shader_trinary_minmax GL_ARB_ES3_compatibility GL_ARB_clear_buffer_object GL_ARB_copy_image GL_ARB_explicit_uniform_location GL_ARB_invalidate_subdata GL_ARB_texture_query_levels GL_ARB_texture_storage_multisample GL_ARB_vertex_attrib_binding GL_KHR_debug GL_ARB_buffer_storage GL_ARB_clear_texture GL_ARB_multi_bind GL_ARB_seamless_cubemap_per_texture GL_ARB_texture_mirror_clamp_to_edge GL_ARB_vertex_type_10f_11f_11f_rev GL_EXT_shader_integer_mix GL_INTEL_performance_query GL_ARB_conditional_render_inverted
VisualID 32, 0x20

Hi
I assume you have installed the graphic card driver from the Intel website and you use NOT a Toshiba graphic driver which was designed especially for the notebook usage.
Well, Toshiba recommend using the Toshiba drivers. In this case you should try to use the recommended graphic driver which you can download from the Toshiba driver page.

Photoshop has encountered a problem with the display driver

I rummaged around in here looking at opengl topics and others associated with the above error, but I'm not seeing what I'm encountering (or I am and I don't recognize it!).....
I bought CS4 a week or so ago, and installed it on a system running XP32 with service pack 3, 4GB of ram withe the /3GB switch set, nVidia 8600 GT card (which according to the list is supported), and multiple spindles for images, scratch, applications, and so on. I found other topics earlier so I downloaded the most recent drivers for my video card.
I'm not crashing and burning, but I'm getting some messages...
I opened an image, and while working on it I wanted to do a transform/warp. I got the message that Photoshop couldn't perform the operation because there wasn't enough memory. It didn't crash but I had to shut down CS4 and restart it to do the warp.
Most recently I opened a couple images for a panorama, and while doing the merge I got the message that "Photoshop has encountered a problem with the display driver and has temporarily disabled gpu enhancements." It tells me to check for the latest drivers - I've ALREADY got the lastest drivers. Again, no crash, just the warning. It completed the panorama.
There have been a couple other occurrences of messages of this type, so I'm curious if there's some set of preferences or system settting I need to adjust to optimize things? I've alrady adjusted the nVidia settings because I also run Lightroom and they're having problems too.
I've read the tech notes for the video and such and didn't find any set of optimizations there so is there a set of adjustments beyond the preferences that needs to be adjusted to improve memory and video performance? And if so, can someone point me to them.

As I understand it (suspect at best) XP32 can address 4 gig of memory. the /3gb switch lets the applications get at 3 gig of that. If my video card takes the first 256MB, and XP is guaranteed the other 750 of the 1st gig, and in the CS4 performance preferences I should be giving it from 1462 - 1895 MB (I've given it around 1890), that leaves me with another gig or so... Is that limited to applications or can XP use it? In any case, I'm not crashing, I just get the message every so often about being out of memory. I don't recall ever seeing this with CS3, but new version, new oddities...

Photoshop CS5.1 Crashes Upon Opening: "Photoshop has encountered a problem with the display driver-"

Every time I try to open photoshop I get a window that pops up and says:
"Photoshop has encountered a problem with the display driver, and has temporarily disabled GPU enhancements. Check the video card manufacturer's website for the latest software.
GPU enhancements can be enable in the Performance panel of Preferences."
Then windows shuts the program down. The details of the problem are:
"Files that help describe the problem:
C:\Users\Owner\AppData\Local\Temp\WER70AD.tmp.WERInternalMetadata.xml
C:\Users\Owner\AppData\Local\Temp\WER9389.tmp.appcompat.txt
C:\Users\Owner\AppData\Local\Temp\WER9407.tmp.hdmp"
I'm on a custom Asus
I'm using Win7 Home Premium 64-bit
16GB RAM
Nvidia Geforce GTX 560 2GB video card
Intel i7 core 2.2 GHz
12 GB of memory
The error happens so quickly that I don't have time to do anything. Please help. >.< I've been on hold for *checks phone* 2 hours exactly. Wow. It is a legit copy and was working last month with no trouble. I've updated the drivers and tried a few solutions that have worked for other people that I found on Google (such as disabling CUDA and setting my "power management mode" to "prefer maximum performance" on my video card) but so far nothing has worked.
Thanks in advance!

It has stopped crashing because somehow it turned off "Enable GL Drawing" on its own because I could never even get a menu open. Not sure how it did that but I am grateful. I still get the error when I open Photoshop up but at least it hasn't crashed yet. At the time when it was crashing I never would have been able to get you the system info due to the speed that it was crashing upon just opening the program. In case you still need it:
Adobe Photoshop Version: 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch]) x64
Operating System: Windows 7 64-bit
Version: 6.1 Service Pack 1
System architecture: Intel CPU Family:6, Model:10, Stepping:7 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2
Physical processor count: 8
Processor speed: 2394 MHz
Built-in memory: 16361 MB
Free memory: 13322 MB
Memory available to Photoshop: 14694 MB
Memory used by Photoshop: 60 %
Image tile size: 128K
Image cache levels: 4
OpenGL Drawing: Disabled.
OpenGL Drawing Mode: Basic
OpenGL Allow Normal Mode: True.
OpenGL Allow Advanced Mode: False.
OpenGL Crash File: Detected.
OpenGL Allow Old GPUs: Not Detected.
Video Card Vendor: NVIDIA Corporation
Video Card Renderer: GeForce GTX 560M/PCIe/SSE2
Display: 1
Display Bounds:= top: 0, left: 0, bottom: 1080, right: 1920
Video Card Number: 1
Video Card: NVIDIA GeForce GTX 560M
Driver Version: 9.18.13.697
Driver Date: 20121002000000.000000-000
Video Card Driver: nvd3dumx.dll,nvwgf2umx.dll,nvwgf2umx.dll,nvd3dum,nvwgf2um,nvwgf2um
Video Mode: 1920 x 1080 x 4294967296 colors
Video Card Caption: NVIDIA GeForce GTX 560M
Video Card Memory: -2047 MB
Serial number: 92628077745082451425
Application folder: C:\Program Files\Adobe\Adobe Photoshop CS5.1 (64 Bit)\
Temporary file path: C:\Users\Owner\AppData\Local\Temp\
Photoshop scratch has async I/O enabled
Scratch volume(s):
C:\, 931.4G, 511.4G free
Primary Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS5.1 (64 Bit)\Plug-ins\
Additional Plug-ins folder: not set
Installed components:
 A3DLIBS.dll A3DLIB Dynamic Link Library 9.2.0.112
 ACE.dll ACE 2010/12/13-23:37:10 64.449933 64.449933
 adbeape.dll Adobe APE 2011/01/17-12:03:36 64.452786 64.452786
 AdobeLinguistic.dll Adobe Linguisitc Library 5.0.0
 AdobeOwl.dll Adobe Owl 2010/06/03-13:43:23 3.0.93 61.433187
 AdobeOwlCanvas.dll Adobe Owl Canvas 3.0.68 61.2954
 AdobePDFL.dll PDFL 2010/12/13-23:37:10 64.341419 64.341419
 AdobePIP.dll Adobe Product Improvement Program 5.5.0.1265
 AdobeXMP.dll Adobe XMP Core 5.0 64.140949
 AdobeXMPFiles.dll Adobe XMP Files 5.0 64.140949
 AdobeXMPScript.dll Adobe XMP Script 5.0 64.140949
 adobe_caps.dll Adobe CAPS 4,0,42,0
 adobe_OOBE_Launcher.dll Adobe OOBE Launcher 2.0.0.36 (BuildVersion: 2.0; BuildDate: Mon Jan 24 2011 21:49:00) 1.000000
 AFlame.dll AFlame 2011/01/10-23:33:35 64.444140 64.444140
 AFlamingo.dll AFlamingo 2011/01/10-23:33:35 64.436825 64.436825
 AGM.dll AGM 2010/12/13-23:37:10 64.449933 64.449933
 ahclient.dll AdobeHelp Dynamic Link Library 1,6,0,20
 aif_core.dll AIF 2.0 53.422628
 aif_ogl.dll AIF 2.0 53.422628
 amtlib.dll AMTLib (64 Bit) 4.0.0.21 (BuildVersion: 4.0; BuildDate: Mon Jan 24 2011 21:49:00) 1.000000
 amtservices.dll AMTServices (64 Bit) 4.0.0.21 (BuildVersion: 4.0; BuildDate: Mon Jan 24 2011 21:49:00) 1.000000
 ARE.dll ARE 2010/12/13-23:37:10 64.449933 64.449933
 asneu.dll AsnEndUser Dynamic Link Library 1, 7, 0, 1
 AXE8SharedExpat.dll AXE8SharedExpat 2011/01/10-23:33:35 64.436825 64.436825
 AXEDOMCore.dll AXEDOMCore 2011/01/10-23:33:35 64.436825 64.436825
 Bib.dll BIB 2010/12/13-23:37:10 64.449933 64.449933
 BIBUtils.dll BIBUtils 2010/12/13-23:37:10 64.449933 64.449933
 boost_threads.dll DVA Product 5.0.0
 cg.dll NVIDIA Cg Runtime 2.0.0015
 cgGL.dll NVIDIA Cg Runtime 2.0.0015
 CoolType.dll CoolType 2010/12/13-23:37:10 64.449933 64.449933
 data_flow.dll AIF 2.0 53.422628
 dvaadameve.dll DVA Product 5.0.0
 dvacore.dll DVA Product 5.0.0
 dvaui.dll DVA Product 5.0.0
 ExtendScript.dll ExtendScript 2011/01/17-17:14:10 61.452840 61.452840
 FileInfo.dll Adobe XMP FileInfo 5.0 64.140949
 icucnv36.dll International Components for Unicode 2009/06/17-13:21:03 Build gtlib_main.9896
 icudt36.dll International Components for Unicode 2009/06/17-13:21:03 Build gtlib_main.9896
 image_flow.dll AIF 2.0 53.422628
 image_runtime.dll AIF 2.0 53.422628
 JP2KLib.dll JP2KLib 2010/12/13-23:37:10 64.181312 64.181312
 libifcoremd.dll Intel(r) Visual Fortran Compiler 10.0 (Update A)
 libmmd.dll Intel(r) C Compiler, Intel(r) C++ Compiler, Intel(r) Fortran Compiler 10.0
 LogSession.dll LogSession 2.1.2.1263
 MPS.dll MPS 2010/12/13-23:37:10 64.450375 64.450375
 msvcm80.dll Microsoft® Visual Studio® 2005 8.00.50727.6195
 msvcm90.dll Microsoft® Visual Studio® 2008 9.00.30729.4940
 msvcp80.dll Microsoft® Visual Studio® 2005 8.00.50727.6195
 msvcp90.dll Microsoft® Visual Studio® 2008 9.00.30729.4940
 msvcr80.dll Microsoft® Visual Studio® 2005 8.00.50727.6195
 msvcr90.dll Microsoft® Visual Studio® 2008 9.00.30729.4940
 pdfsettings.dll Adobe PDFSettings 1.04
 Photoshop.dll Adobe Photoshop CS5.1 CS5.1
 Plugin.dll Adobe Photoshop CS5 CS5
 PlugPlug.dll Adobe(R) CSXS PlugPlug Standard Dll (64 bit) 2.5.0.232
 PSArt.dll Adobe Photoshop CS5.1 CS5.1
 PSViews.dll Adobe Photoshop CS5.1 CS5.1
 SCCore.dll ScCore 2011/01/17-17:14:10 61.452840 61.452840
 tbb.dll Threading Building Blocks 2, 1, 2009, 0201
 TfFontMgr.dll FontMgr 9.3.0.113
 TfKernel.dll Kernel 9.3.0.113
 TFKGEOM.dll Kernel Geom 9.3.0.113
 TFUGEOM.dll Adobe, UGeom© 9.3.0.113
 updaternotifications.dll Adobe Updater Notifications Library 2.0.0.15 (BuildVersion: 1.0; BuildDate: BUILDDATETIME) 2.0.0.15
 WRServices.dll WRServices Thursday January 21 2010 12:13:3 Build 0.11423 0.11423
 wu3d.dll U3D Writer 9.3.0.113
Installed plug-ins:
 3D Studio 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
 Accented Edges 12.0
 ADM 3.11x01
 Angled Strokes 12.0
 Average 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
 Bas Relief 12.0
 BMP 12.0.2
 Camera Raw 6.7
 Chalk & Charcoal 12.0
 Charcoal 12.0
 Chrome 12.0
 Cineon 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
 Clouds 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
 Collada 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
 Color Halftone 12.0.2
 Colored Pencil 12.0
 CompuServe GIF 12.0.2
 Conté Crayon 12.0
 Craquelure 12.0
 Crop and Straighten Photos 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
 Crop and Straighten Photos Filter 12.0.2
 Crosshatch 12.0
 Crystallize 12.0.2
 Cutout 12.0
 Dark Strokes 12.0
 De-Interlace 12.0.2
 Dicom 12.0
 Difference Clouds 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
 Diffuse Glow 12.0
 Displace 12.0.2
 Dry Brush 12.0
 Eazel Acquire 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
 Embed Watermark 4.0
 Entropy 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
 Extrude 12.0.2
 FastCore Routines 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
 Fibers 12.0.2
 Film Grain 12.0
 Filter Gallery 12.0
 Fresco 12.0
 Glass 12.0
 Glowing Edges 12.0
 Google Earth 4 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
 Grain 12.0
 Graphic Pen 12.0
 Halftone Pattern 12.0
 HDRMergeUI 12.0
 IFF Format 12.0.2
 Ink Outlines 12.0
 JPEG 2000 2.0
 Kurtosis 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
 Lens Blur 12.0
 Lens Correction 12.0.2
 Lens Flare 12.0.2
 Lighting Effects 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
 Liquify 12.0.1
 Matlab Operation 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
 Maximum 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
 Mean 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
 Measurement Core 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
 Median 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
 Mezzotint 12.0.2
 Minimum 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
 MMXCore Routines 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
 Mosaic Tiles 12.0
 Multiprocessor Support 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
 Neon Glow 12.0
 Note Paper 12.0
 NTSC Colors 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
 Ocean Ripple 12.0
 OpenEXR 12.0.2
 Paint Daubs 12.0
 Palette Knife 12.0
 Patchwork 12.0
 Paths to Illustrator 12.0.2
 PCX 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
 Photocopy 12.0
 Photoshop 3D Engine 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
 Picture Package Filter 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
 Pinch 12.0.2
 Pixar 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
 Plaster 12.0
 Plastic Wrap 12.0
 PNG 12.0.2
 Pointillize 12.0.2
 Polar Coordinates 12.0.2
 Portable Bit Map 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
 Poster Edges 12.0
 Radial Blur 12.0.2
 Radiance 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
 Range 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
 Read Watermark 4.0
 Reticulation 12.0
 Ripple 12.0.2
 Rough Pastels 12.0
 Save for Web & Devices 12.0
 ScriptingSupport 12.1
 Shear 12.0.2
 Skewness 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
 Smart Blur 12.0.2
 Smudge Stick 12.0
 Solarize 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
 Spatter 12.0
 Spherize 12.0.2
 Sponge 12.0
 Sprayed Strokes 12.0
 Stained Glass 12.0
 Stamp 12.0
 Standard Deviation 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
 Sumi-e 12.0
 Summation 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
 Targa 12.0.2
 Texturizer 12.0
 Tiles 12.0.2
 Torn Edges 12.0
 Twirl 12.0.2
 U3D 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
 Underpainting 12.0
 Vanishing Point 12.0
 Variance 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
 Variations 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
 Water Paper 12.0
 Watercolor 12.0
 Wave 12.0.2
 Wavefront|OBJ 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
 WIA Support 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
 Wind 12.0.2
 Wireless Bitmap 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
 ZigZag 12.0.2
Plug-ins that failed to load: NONE
Flash:
 Mini Bridge
 Kuler
 Access CS Live
 CS Review
Installed TWAIN devices: NONE

I am getting an error encountered problem with the display driver for my Photoshop CS5 extended

I have Windows 7 and have used CS5 extended with no problems for quite a while now.
Last week I started up CS5 and received the error:
"Photoshop has encountered a problem with the display driver and has temporarily disabled GPU enhancements. Check the video card manufacturers website for the latest software. GPU enhancements can be enabled in the Performance panel of Preferences."
"Please close program and uninstall and re-install if problem persists"
I was able to edit, however when I went to save my work it would not do so. The following error came up.
"Could not complete the command because the extension could not be loaded"
"Could not save a copy as .....because of a program error"
I checked to make sure I have the latest driver, I also uninstalled and re-installed the program and I am still getting the errors.
Can anyone help with this?

Error 1402 | Error 1406 | Acrobat, Reader

Beginner Has Problem With Loading JDBC Driver Using MySQL

Hi, I am having problem with loading JDBC driver, and need your diagnotic help.
1. I have installed MySQL (C:\mysql), created a databse (soup), and created a littel table (VIDEOS). I am able to see the table in the console:
sql> select * from videos
2. I have downloaded the latest version of Connector/J (mysql-connector-java-3.1.0-alpha.zip), and unzip the zip file into my C:\ directory.
3. I copied the mysql-connector-java-3.1.0-alpha-bin.jar to the C:\j2sdk1.4.1_02\jre\lib\ext folder and it is in my CLASSPATH
4. MySQL server is running
C:\> C:\mysql\bin\mysqld-nt --standalone
5. open another DOS window and use the database
mysql>USE SOUP
6. succesfully compiled a Java program (javac Test.java):
import java.sql.* ;
public class Test
public static void main( String[] args )
try
Class.forName("org.gjt.mm.mysql.Driver").newInstance();
try
Connection con = DriverManager.getConnection( "jdbc:mysql://localhost:3306/soup" );
try
Statement statement = con.createStatement();
ResultSet rs = statement.executeQuery("SELECT TITLE FROM VIDEOS");
while ( rs.next() )
System.out.println( rs.getString( "TITLE" ) );
rs.close();
statement.close();
catch ( SQLException e )
System.out.println( "JDBC error: " + e );
finally
con.close();
catch( SQLException e )
System.out.println( "could not get JDBC connection: " + e );
catch( Exception e )
System.out.println( "could not load JDBC driver: " + e );
7. when I run the Java program (java Test), I got
the message:
could not load JDBC driver: java.lang.ClassNotFoundException: org.gjt.mm.mysql.Driver
What am I missing?

Hi,
I missed to specify test in my last post.
Try running your program by explicitly setting the classspath when
running your program . java -classpath c:\mysql-connector-java-3.1.0-alpha-bin.jar test
Make sure your jar file contains org.gjt.mm.mysql.Driver class

Satellite A60-712 problems with ATI ati2dvag driver

Similar Messages

Maybe you are looking for