Satellite A60 - Conflict with the clock

Greetings, I have a problem with a Toshiba Satellite A60, is this: the PC clock advances one second as time goes 4 seconds, ie in the pc are the clock is 9:29:17 and the same time but to change one second on the pc, is like this: 9:29:18 and the clock has advanced 4 seconds running 9:29:21, and disassemble the laptop and check the internal battery of the board and is soldered to the pc, if you can not take off, but I believe that working with the battery of the laptop, the pc does not have windows installed, in fact I'm going on no hard drive and entered the BIOS and still gives the error.
That could be? I suggest they do? Thank you.
My language is Spanish, so I apologize for my English.

Hey mate,
To be honest I really dont know what mean exaclty. I only understand that you have problems with the clock.
The RTC (BIOS) battery can be charged if you leave the notebook connected to AC/DC adaptor. This also loads the RTC battery.
Check this!!!

Similar Messages

The action could not be completed because of a conflict with the original item. The conflict may have occurred when an existing item was updated on another computer or device. Open the item again and try making your changes. If the problem continues, cont

I have a user on an iMac 10.6 connected to our domain. She uses Outlook web access for email on our exchange server. Last week she received the following message which is randomly preventing her from sending emails. She claims no attachment was involved in the original email when this all started. I have not been able to look at her account as she is out of the office but maybe someone else dealt with this issue. I realize this may not be Mac related but thought I'd give it a try. She did say it occurred once over two days while working on a PC but it continued over the past weekend.
If an internal user tries to send a message with infected attachment using Outlook Web Access, it may report the following error message: The action could not be completed because of a conflict with the original item. The conflict may have occurred when an existing item was updated on another computer or device. Open the item again and try making your changes. If the problem continues, contact technical support for your organization.
This is because F-Secure Anti-Virus for Microsoft Exchange has detected a virus in the attachment. If the user tries to send the message again, the message will be sent but without the attachment. At the same time a blank message with an attachment named "Attachment_information.txt" will remain in the user's Drafts folder. The "Attachment_information.txt" will contain information about the virus detected in the message.

PS - have found other posts indicating that clips smaller than 2s or sometimes 5s, or "short files" can cause this. Modern style editing often uses short takes ! Good grief I cannot believe Apple. Well I deleted a half a dozen short sections and can export, but now of course the video is a ruined piiece of junk and I need to re-do the whole thing, the sound etc. which is basically taking as much time as the original. And each time I re-do it I risk again this lovely error -50 and again trying to figure out what thing bugs it via trial and error instead of a REASONABLE ERROR MESSAGE POINTING TO THE CLIP IT CAN'T PROCESS. What a mess. I HATE this iMovie application - full of BUGS BUGS BUGS which Apple will not fix obviously, since I had this product for a few years and see just hundreds of hits on Google about this error with disappointed users. Such junk I cannot believe I paid money for it and Apple does not support it with fixes !!!
If anyone knows of a GOOD reasonably priced video editing program NOT from APPLE I am still looking for suggestions. I want to do more video in future, but obviously NOT with iMovie !!!

"conflicts with the WAN IP address"

I just picked up a used AirPort Extreme N (Gigabit Ethernet) to replace my current non-Apple router, which has worked satisfactorily but lacks the ability to share disks--something I need. Using my G5 running 10.4.11, I downloaded AirPort Utility 5.4.2 to set up the new (to me) device, and did a factory reset just to clear everything out. I placed the AirPort in the network exactly where the old one had been--with its WAN port connected to the line supplied by my ISP (see below) and its three other ethernet ports connected to various clients. Then I ran into a problem:
Under the "Internet" icon of Airport Utility, I set it to Connect Using Ethernet, and Configure IPv4 using DHCP (My current router uses DHCP to provide IP addresss to both the wired and wireless devices on my network). The numbers below that are: IP address 192.168.1.12, subnet mask 255.255.255.0, and router address 192.168.1.1.
The first field of the line labeled "DNS Server(s)" defaults to 192.168.1.1, while the second field is empty, as are the fields Domain Name and DHCP Client ID. I left Ethernet WAN port on "Automatic" and put "Connection Sharing" on "Share a Public IP address," since I believe its combination of DHCP and NAT offer the best security.
The problem: When I click the "Update" button to confirm my settings, I get this message: "The DHCP range you have entered conflicts with the WAN IP address of your Apple wireless device."
Although I am unclear as to why the Internet Connection pane of the AirPort Utility lists "IP address" and "Router address" as two separate numbers (aren't they referring to the same device, the AirPort itself? How can it have two IP addresses?), I figured that I could play it safe and change the starting number to 192.168.1.13 to avoid the conflicts with 192.168.1.12.
But I still get the same error message when pressing "update." I tried changing the range to 192.168.1.50 - 192.168.1.60, and I still get the same error message. There seems to be no range that the utility will accept as non-conflicting with the "WAN IP address" of the Airport.
My ISP did not provide a visible modem as others in the past have done. The internet connection they left me simply comes out of a box on the back of the house that is connected by fiber optics to (presumably) a fiber optic line out in the street. However, this "supply line" has always worked fine with my non-Apple router and--after disconnecting the AirPort that had temporarily taken its place--is working right now as I throw this question to the forum.
Additional notes:
* Under the NAT tab, the box "Enable NAT Port Mapping Protocol" is checked, as it was by default) while "Enable default host at" is unchecked and blank.
* While I currently have wireless turned on in the AirPort, I haven't even tried wireless connectivity yet and want to make sure my wired connectivity is working first.
Thanks for any assistance.

The problem: When I click the "Update" button to confirm my settings, I get this message: "The DHCP range you have entered conflicts with the WAN IP address of your Apple wireless device."
This error message typically indicates that your 802.11n AirPort Extreme Base Station (AEBSn) is receiving a Private (as opposed to a Public IP address) on its WAN port. That could be because your ISP does not provide any device (computer or router), that is directly connected to their "box," with a Public IP address.
Your AEBSn is both a DHCP client (on the WAN-side) and a DHCP server (on the LAN-side). The Configure IPv4 is basically the on/off switch for the AEBSn's DHCP client. It's other option, PPPoE, would only be used if your ISP requires it.
One option would be to reconfigure the AEBSn as a bridge. This would disable both the AEBSn's NAT & DHCP services.
Although I am unclear as to why the Internet Connection pane of the AirPort Utility lists "IP address" and "Router address" as two separate numbers (aren't they referring to the same device, the AirPort itself? How can it have two IP addresses?
The IP address information on (actually the TCP/IP pane) is showing you the AEBSn's WAN port settings. Settings that with Configure IPv4 set to Using DHCP would come from the DHCP server upstream of it. If this server was providing Public IP addresses then the values in both the IP Address & Router Address fields would not be in any of the three valid Private IP Address ranges (10.x, 172.x, or 192.x)
Under the NAT tab, the box "Enable NAT Port Mapping Protocol" is checked, as it was by default) while "Enable default host at" is unchecked and blank.
This setting would not have anything to do with the error message that you are getting. Instead, this option is used as an on/off switch for the NAT-PMP protocol. This protocol is similar to non-AirPorts' UPnP protocol.
While I currently have wireless turned on in the AirPort, I haven't even tried wireless connectivity yet and want to make sure my wired connectivity is working first.
Both wired and wireless clients will be impacted by this until resolved. I again, suggest that you try reconfiguring the AEBSn as a bridge. (ref: AirPort Utility > Select the AEBSn > Manual Setup > Internet > Internet Connection > Connection Sharing = Off (Bridge Mode))

My time capsule will allow only one machine to connect to the internet at a time. Connection sharing is "off" on the Airport Utility. When I try to share an IP address I get the message that "DHCP range that I entered conflicts with the WAN IP address" I

Suddenly, my time capsule will not allow more than one computer to connect to the internet at a time. On the Airport Utility on the internet tab, Connection Sharing is "Off (Bridge Mode)" When I try to change it to sharing an IP address, I get two messages that the beginning and ending DHCP addresses that the DHCP addresses I've entered conflict with the WAN address of my Apple wireless device."
Any ideas?
Thanks

I use a DSL to connect to the internet. The modem is a Westell C90-810030-06. Two things happened in connection with the fail. I upgraded the firmware in both my Time Capsule (connected to the DSL) and the Airport Extreme (connected to my printer--used to extend the network). I also upgraded my Colof Nook to the Android Faux Tablet version. I can't imagine that that is creating some sort of mismatch.
I have now downgraded the firmware on the Time Capsule to 7.4.1 which is what I had before. Fortunately, I found the trick to downloading the older airport utility to find the older firmware. All the older versions disappeared from my computers.
I still have the same problem. Wifi works fine. If a second device connects to the wifi, then it works fine, but the first no longer has a connection.
And my Airport Extreme is not working at all. It cannot be seen by the computer. I tried resetting it. I'm going to connect it by ethernet and downgrade the firmware on it.
I appreciate any help. This is so frustrating.

For some reason when I shut down my computer then turn it back on, it comes back directly into my account, bypassing having to enter a password to get into my account. This works in direct conflict with the parental controls I've got set up. Any ideas?

For some reason when I shut down my computer then turn it back on, it comes back directly into my account, bypassing having to enter a password to get into my account. This works in direct conflict with the parental controls I've got set up. Any ideas?

Thank you so much for the quick response to my question. I tested your directions and it works!! Thank you. I would never have figured that out. I knew I had to go into System Preferences but would not have guessed that I needed to have Automatic Login set to off.

The colour swatch 'black' has a conflict with the current document?

I have created some graphic styles and saved them as the manual explains.
When using them in a new document I keep getting the conflict window asking if I wish to merge swatches.
What have I done to keep getting this unwanted conflict message?

Yeah, *real* annoying. This is something new. It didn't happen before in CS5, at least not to me and I always work with global colors.
Example:
No matter what object, no matter what color (even without any color!), upon paste I get the merge dialog: The color swatch "K=30" has a conflict with the current document.
When I delete the swatch and then cut something (not having that color) I get: The color swatch "Deleted Global Color" has a conflict with the current document.
Does anyone have a solution to this problem?
This is driving me nuts.

Problem with the clock widget

Hi,
I would like to know if someone have a problem with the clock widget after doing the update system to Mac OS X Mavericks (v.10.9), cause the appearance of my clock was like this (attached image). Pay attention for the position of hands of the clock (watch hands): Don't have something strange?
Anyone know how to fix this problem?
Thanks in advance.

Hi, I have the same problem, I have done a fresh install of OS X and still did not fix the clock ... For when a new update?
Thanks

The DELETE statement conflicted with the REFERENCE constraint "FK_Equipment_Assets". The conflict occurred in database "WorkOrderSystem", table "dbo.Equipment", column 'AssetCode'........can someone give me a solution for this Error.

The DELETE statement conflicted with the REFERENCE constraint "FK_Equipment_Assets". The conflict occurred in database "WorkOrderSystem", table "dbo.Equipment", column 'AssetCode'

ya that's true row is referenced by another table.....but i want the row to referred by another table ,I don't know how to fix it
Actually this is not a C# issue. It is a T-SQl issue.
https://social.msdn.microsoft.com/Forums/sqlserver/en-US/home?forum=transactsql
The above link should be posted.
Per my understanding, first you should
delete the record from the Foreign Table and then after you have to delete the record from the Primary Key table
Hope it helps you.
Best regards,
Kristin
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Is it possible to play oBo Word Snake without conflicting with the pulldown notifications screen? If not is there another similar app to get addicted to?

is it possible to play oBo Word Snake without conflicting with the pulldown notifications screen? If not is there another similar app to get addicted to?

Hi,
There will be a “Post” list in that user’s MySite storing all the blogs that below to that user, we can delete all the blogs in that list if with sufficient permission in that
user’s MySite.
Best regards,
Patrick
Patrick Liang
TechNet Community Support

Trying to set up Directv GenieGO using Airport Extreme. Getting error message: DHCP range entered conflicts with the WAN IP Address of your base station. How do I resolve the conflict.

Trying to configure an Airport Extreme manually. After I enter the IP Address of the GenieGo along with the rest of information required I am getting the following error message when I click update:
DHCP range entered conflicts with the WAN IP address of your base station.
How do I resolve the conflict?

You cannot use the same range on LAN and WAN if you are routing.. it must be different.. and you should not be routing at all.
The AE should be in bridge mode. NO DHCP settings at all.

Conflict with the component names

Hi everybody,
I think I have a conflict with the names of the components. Let me explain to you.
On the first window, I have a component described like this :
Component Type -> Text Input Component
Component Name -> ArgoLineClientV2R4_Text_1_txf
On another window, I have this :
Component Type -> Graphics Component
Component Name -> ArgoLineClientV2R4_Text_1_txf
As you see, these components have the same name but are different type. With the first, I manage to write the word in. With the second, I want to extract a word but I can't.
So, I would like to know the reason. Is it because the components have the same name? Is it because the second component is a Graphics component ?
Thanks for your time.
Best regards.
Romain.

Hi Oliver, thanks for your answer.
ArgoLineClientV2R4_Text_1_txf is the technical name, given by Jubula during the object mapping. In my program, I use different names of course.
These two components have different functionalities. With one, I write a word in; and with the other the software gives me an information (a word). With the second, i can only read the information and I need to take this information to put it in a String variable. So I tried to extract this information but I (my program) failed. I wanted to make a clic and make a copy of the word. But when I try to clic, my test fails.
I think it is because Jubula describes this component like a Graphics Component whereas in the software parameters, this component is a text field (in mode ReadOnly but a text field).
Here is my situation.
Regards.
Romain

The name of this class conflicts with the name of another class

I had a problem when compiling my flash movie. I had made an
instance from a class, but the output kept saying:
"The name of this class, XXX, conflicts with the name of
another class that was loaded XXX."
I read a lot of developers have the same problems, when i
looked it up:
Google
link on : "conflicts with the name of antother class that was
loaded"
Apparently it is some kind of bug caused by different times,
between local/network machines and servers.
Also when there is a time difference involved between 2
computers, then this problem also occurs.
Can't macromedia fix this bug? .....Because as a developer i
don't want to adjust my time, everytime i want to test my flash
movies or have to compile my movie 2 times. The other developers
are getting tired of it also.
We need to get this bug trough to macromedia or adobe!
It needs to be fixed!

Can anyone help?

SQL error msg - The DELETE statement conflicted with the SAME TABLE REFERENCE constraint

Executed as user: ****. The DELETE statement
conflicted with the SAME TABLE REFERENCE constraint "FK_PARENT_TASK_REF".
The conflict occurred in database "****", table "****", column
'PARENT_TASK_ID'. [SQLSTATE 23000] (Error 547) The statement has been
terminated. [SQLSTATE 01000] (Error 3621). The step failed.
Does this error msg indicate the whole script failed to execute or was it just a single step/task that failed ?
What does error msg mean ?
Anyway to prevent this error msg and ensure script runs successfully

Hi mdavidh,
This error occurs because the record 'PARENT_TASK_ID' was referenced by 'FK_PARENT_TASK_REF'.
Please refer below codes:
CREATE TABLE MyTable (
ID INT, primary key(ID), -- primary key
ID_Parent INT foreign key(ID_Parent) references MyTable(ID), -- foreign key reference the same table
insert into MyTable(ID,ID_Parent)
values(0,0);
insert into MyTable(ID,ID_Parent)
values(1,0);
insert into MyTable(ID,ID_Parent)
values(2,0);
insert into MyTable(ID,ID_Parent)
values(3,1);
insert into MyTable(ID,ID_Parent)
values(4,3);
insert into MyTable(ID,ID_Parent)
values(5,4);
CREATE TRIGGER MyTrigger
on MyTable
instead of delete
as
set nocount on
update MyTable set ID_Parent = null where ID_Parent in (select ID from deleted)
delete from MyTable where ID in (select ID from deleted)
Now we could delete records.
delete from MyTable where ID_Parent=0
Thanks,
Candy Zhou

Satellite A60 - lines on the screen

Hi,
I have a Satellite A60 with a graphics problem. The screen has all lines over it, and is also the same when connected to an external monitor.
Thanks Ian

Hello
Usually when someone writes about some issue on the notebook there is usually a question at the end. I understand your posting as one report. ;)
Do you have some questions about it?
Anyway just one comment to this: graphic card is defective motherboard exchange.

Itunes conflicting with the DVD drive in windows 8.1

Has anyone had any conflict on the DVD drive betweeen W8.1 and Itunes 11.1.3.8 i know its this as when i uninstall Itunes the conflict dissapears re-install itunes and the conflict re-appears which then renders the dvdv drive uselss. actually it doesnt even show up in the drive letters.

Hi, we have the same problem, just follow these steps:
https://www.dropbox.com/help/4211
I found out that this has a connection with the problem that I encountered with the synching of my dropbox.
Hope this would help.
After following this, I can now print in Microsoft Word and also via PDF.

Satellite A60 - Conflict with the clock

Similar Messages

Maybe you are looking for