Satellite A60: Integrated Radeon 7000 Graphics Memory Upgrade

Hi Everybody!
I was wondering if I could get up to 128MB RAM on my Integrated ATI Radeon 7000 IGP?
Maybe I could upgrade my RAM to 1GB to get 128MB video RAM on my Radeon 7000?
Thanks!
suddste

Hi
It would be very interesting to know the detailed name of your unit Satellite A60-xxx because some models were delivered with the shared memory graphic card and it should be possible to change the memory up to max 64 MB.

Similar Messages

  • Graphics memory upgrade

    Is it possible to upgrade the graphics memory on the new 27" iMACs? They give the option of 1 or 2 GB of memory but is that one of those soldered in components or can memory be added after the purchase?

    The graphics options are a custom build option only. The graphics have to be chosen prior to purchase.
    True, however, that doesn't mean that that the video card as a spare part doesn't exist. The video is not integrated onto the logic board as it is on other systems like the notebooks. 

  • Satellite S50 won't POST after memory upgrade

    Hello, all:
    I just purchased a brand-new 8gb Kinston memory stick (KTT-S3C/8G) for my one-month-old Satellite S50 (S50-ABT3N22). Slot A contains the standard issue 4GB stick that came with the unit so I put this into Slot B. When I install it, the machine refuses to POST. Kind of odd. So, I swapped the DIMMS and it still doesn't POST.
    Any idea what's going on? The DIMM is brand-new. On the Kingston label, it also has a Toshiba PN PA5037U-1M8G.
    Any info would be helpful. I'm hoping the DIMM isn't bad.
    Rich

    no worries.  Lots of folks miss the fact that their computer is spec'd with the "L" which stands for low voltage type of ram.  That's what the "L" stands for in the DDR3L 1600MHz.  You can likely run faster ram (or overclock to a faster speed if the bios allows) but you need to adhere to the voltage requirements, as well as the timings. 
    L305-S5955, T9300 Intel Core 2 Duo, 4GB RAM, 60GB SSD, Win 7 Ultimate 64-bit

  • Satellite A105-S2001 wont boot after memory upgrade

    I just tried to upgrade my memory from 512mb to 2 gb using 2 1gb memory chips from crucial. When i insert both memory chips at the same time my laptop wont boot, it'll attempt to but stop in the middle of the process and try again 5 or 6 times. Nothin shows up on the screen. The same thing happens when i put only one 1gb chip in. When i put my old 512mb chip in and one 1gb chip the computer boots but only recognizes 960mb or ram. i also updated my bios.
    thanks

    Sounds like incompatible memory.  Fortunately, Crucial is very good about honoring their compatibility guarantee so you should be able to get them exchanged.  You can get very strange results with incompatible chips due to the differences in timing specs.  That would account for what you're seeing.  I assume it works normally if you have just the original 512MB chip in place.

  • Satellite A200 - strange issue after graphic driver upgrade

    The problem concerns the driver for Mobile Intel(R) 965 Express Chipset Family. System: Vindows VISTA 32bit Home Premium Service Pack 1. Laptop: Satellite A200.
    I installed the new driver from this source (suggestion by Toshiba TEMPO):
    http://ce.computers.toshiba-europe.com/innovation/download_driver_details.jsp?ID=65340&OSID=26&drive rLanguage=42&SOURCE=TEMPO&LNG=20
    After switching on of the computer, the system is constantly asking me ("warning about securities"), whether to run (open) 3 files: C:\Windows\System32\igfxtray.exe / ...hkcmd.exe / ...igfxpers.exe. Disabling of option "Always ask before opening of the file" doesn't help. I have to choose option "Open / Cancel / Close" to continue switching on of the Windows (any option allows switching on). Please mind that I have translated above mentioned communications from Polish.
    Answer for the question, which I received from Intel(R) Technical Support:
    ++This is actually not a problem with our drivers. This is related to the administrative/user rights and security features set by Windows* Vista.++
    Yours faithfully,
    Maciej Kochan

    When you install drivers, you should Right-click the EXE file and choose "Run as Administrator".
    You should also temporarily disable your security software or reconfigure it to allow the system file.
    Spyware removal tools such as AdAware and Spybot (or the spyware tool in your Internet Security package) may be blocking the system file.

  • Memory upgrade on Satellite A60-218

    Hi,
    Is it possible to upgrade the memory for the Satellite A60-218 models?
    I've heard that the memory is onboard (internal) and cannot be replaced. Is this true?
    If not, could somebody give me a hint where can I find the memory modules on this model?
    I have tried disassembling it without success.
    Thanks!
    Levente

    Hello
    Just for info: Satellite A60 has 512 MB internal memory and one sot only is available for upgrade. This unit can handle with max 1,5 GB of RAM. On the bottom side in the middle there is placed memory module cover. Remove it and you will find RAM slot.
    For RAM upgrade you can use follow compatible memory modules:
    PC2700 512MB (PA3312U-1M51)
    PC2700 1024MB (PA3313U-1M1G)
    If you have more questions please write again.
    Bye and good luck!

  • K7Turbo MS-6330 & Radeon 7000 & Geforce 4 440SE & 512MB Memory

    Please help I have an MSI K7Turbo and have just added 256 SDRAM on top of my 512 and then tried to install an ATI Radeon 7000 Graphics card. I t all loaded up ok , I thought excellant then after a minute I get a blue screen with an error and have to reboot. Then nothing starts up, blank screen. So I remove the 256 SDRAM and reboot, Graphics card isn't happy so have to reinstall that, then it works.So then I thought I would shutdown and add the 256 SDRAM, only to find it does not work and have to go through it again and run with just 512 SDRAM.This means my 256 SDRAM sits on the side looking very much retired. Why is this happeing, the motherboard says it takes upto 1.5GB of DRAM. So then I found out the Radeon doesn't work if you have more than 512MB, so I bought a Geforce 4 440SE and thought all my problems would go away, nope they were the same, none of these cards work with more than 512MB SDRAM......please someone tell me why
    Someone is ripping us off and Im about to loose my patience.HELP HELP HELP SOS SOS

    First time I hear Radeon 7000 doesn't work with more than 512 Mb. memory.-
    It has sence if you'r using Windows 98 or 98 se O/S. If not most probably is a compatibility memory problem, or a faulty 256 Memory Module. If you are using other O/S than W.98 try 256 Memory alone to see if it works.- Generally speaking is not good idea to mix difs memory brands.-

  • Radeon 9200 graphic card on MSI KT6V-LSR mainboard crashing

    My problem is as follows: I'm running my KT600 mainboard (MSI KT6V-LSR) with a Radeon 7000 graphic card without any problems at all. However, when trying to upgrade to Radeon 9200, the machine crashes right after login in Windows XP and I actually have to remove the mainboard battery to be able to start it again. I'm using the latest Catalyst drivers (5.11). It works fine in safe mode and in vga mode. Any obvious solution on this anyone?

    Quote from: Dr Stu on 14-November-05, 04:30:20
    sounds a bit extreme. does your system have a reset button?
    No, just a power button. However, no response on it after a crash like this.
    Quote from: Dr Stu on 14-November-05, 04:30:20
    have you tried uninstalling the Catalyst drivers in Safe Mode and then rebooting, then reinstall drivers once windows has loaded?
    I have uninstalling/installing the drivers a couple of times yes.
    Quote from: Dr Stu on 14-November-05, 04:30:20
    lastly, Is your problem caused by your PSU? please provide your PSU specs in case that is the cause of your woes...
    My PSU is a 350Watt powersupply. The case actually prevent me to see the brand of it, so this is all I know. BTW, the Radeon 9200 card is running perfectly fine on another mainboard I have (asus), so I guess the graphic card is fine.

  • Problems with grahic card on my Satellite A60-672

    I have a Satellite A60-672 which has graphics by ATI. On a number of occasions on start up it has crashed and the online crash system says everytime that it is ATI technologies. I have emailed ATI and they said it is nothing to do with them.
    I have tried to email toshiba but none of the address work. The crash system tells me to uninstall the software but seeing as I didnt put it on, i am wary about doing this as it might muck up the operation of my laptop.
    Currently my laptop works fine with this continuous problem. Has this happened to anyone else or does any one know how to contact toshiba.
    Thanks

    Hi,
    here is a url where you could choose your country. Then you have to choose PC systems, after a new site is shown and there is on the left side a telephone number from the Toshiba infoline. They could say you the country specific number for the Toshiba Support hotline!
    http://www.toshiba.co.jp/worldwide/europe.html
    Bye and a happy new year!
    TOK

  • Graphic card upgrade on Satellite A60

    My Queston is if there is any possibitity to change my Radeon Mobility 7000 igp of my Satellite A60 for a better card or do i have to by a complete new Mainboard?

    Hello
    This theme was discussed a lot of time in the forum and there is a simply and short answer: No, its not possible to upgrade the graphic card.
    The card is a little chip which is fixed on the mainboard.
    About the motherboard changing: Well, its not very easy because of a exact fitting and compatibility.
    Bye

  • Satellite A60 memory upgrade doesn't work - help

    Hi, I have a Satellite A60-793 and I would like to upgrade the memory adding a 512 MB to currently installed memory.
    I tried to install a 512MB PC2700 DDR 333MHz SODIMM module, but system won't boot up: it emits a long whistle, then shuts down automatically. If I remove the module, system boots properly.
    I've allready updated my BIOS, i there anything more I can do to make it work?

    Well I apreciate your attention.
    But I still have a doud here, do you think it may be solved if I change the actual 8chip module for one 16chip module low density with the same caracteristics? I was told these were more compatible modules.
    Any advise for this?
    Thanks!
    David

  • Memory Upgrade on Satellite Pro A60

    I have upgraded an A60 Pro with a 1GB memory up but the Control Panel /System/ General tab still shows it as having 192MB RAM. This limits me downloading some Security Software from BT Yahoo.
    Can anyone advise on how I can make the machine recognise the new RAM or is the 192 MB RAM noted different memory from the new memory upgrade?

    If you use non-compatible RAM module it is logic that system can not recognize it correctly. I do not know who is the manufacturer of this 1 GB RAM module but if you want to use compatible one pick up some info about PC2700 1024MB (PA3313U-1M1G) or check Kingston web page.

  • Memory upgrade to 1GB RAM on Satellite A60

    I have Satellite A60 and I want to update the memory from 256MB to 1GB
    Please can I do it?

    Hi
    Maybe the link to this Toshiba Satellite A60 memory website could help you too:
    http://www.orcalogic.co.uk/asp/prodtype.asp?prodtype=8333&ft=m&st=3
    As mentioned there is only one upgradeable memory slot and you could use the 200-Pin PC2700 (333Mhz) DDR SODIMM modules.
    Usually its not matter what manufacture it is. Only the memory specifications are important.
    Bye

  • Satellite A60-199 - memory upgrade questions

    I have an Satellite A60-199 and want to increase RAM from 512mb.
    Is this possible and if so how much memory can I put in
    Mike Hills

    The brochure says you can install a 1GB module in the Memory Slot. There is only one slot you can install memory into.
    So if there is 256MB onboard, you can increase the total memory to 1.25GB

  • Graphics card upgrade on my A60?

    Hi,
    I've had an A60 with on-board ATI Raedon 7000 shared memory graphics for over a year and have had ongoing problems with crashing. I seem to have (at least temporarally) resolved this issue by reducing the colours to 16m...
    I am now using some more graphics intensive programs (games) and wonder if anybody can suggest a way of making things like "Age of Empires III" work faster than 1 frame per second (short of buying a desktop)?
    I wouldn't mind upgrading the graphics chip to a card if this is possible but any suggestions would be appreciated!
    Many thanks,
    Paul.

    Hi
    Daniel is right. Its not possible to upgrade the notebook graphic cards.
    The notebook technology is very tricky and you cant compare it wit the desktop PC.
    By the way: The Age of Empires 3 is newer game and to play it you need a high performance pc and graphic card with good cooling system
    Bye

Maybe you are looking for

  • Dunning run - missing documents

    Hello all I am running the dunning wizard and I have several documents, from several BP, that are not extracted from the wizard (are missing). Same documents are between other's and never have been in any dunning run. The configuration has 12 levels

  • Web browsing doesn't work

    Hi all. I have a problem with my MacBook. Sometimes I can not browse internet. Internet is connected, skype, lync, outlook, everything is ok except web browsing. Chrome and Safari browsers do not work - it looks like there is no internet conectivity.

  • Configure-ha-persistence

    I want to know if this command is going to really overwirte the configuration set in the sun-web.xml. I found this command doesn't work at all or i am missing something important. configure-ha-persistence -user admin -host localhost -port 4850 -type

  • Connected SharePoint Sites listing Projects eventhough "Do not create a site" is set

    Hi Is it normal to see a list of projects in the PWA > Server Settings > "Connected SharePoint Sites" eventhough we have configured the config settings to "Do not create a site"?  Is it actually creating sites or is it just listing the projects that

  • FATAL: Caught OutOfMemoryError! Node will exit with exit code 666

    Dear buddies, we encountered the failure of "FATAL: Caught OutOfMemoryError! Node will exit with exit code 666". And we had followed the sap notes 723909 with configtool to change the JVM parameters of heap size. however we were not sure which node t