Satellite A60 memory upgrade doesn't work - help

Hi, I have a Satellite A60-793 and I would like to upgrade the memory adding a 512 MB to currently installed memory.
I tried to install a 512MB PC2700 DDR 333MHz SODIMM module, but system won't boot up: it emits a long whistle, then shuts down automatically. If I remove the module, system boots properly.
I've allready updated my BIOS, i there anything more I can do to make it work?

Well I apreciate your attention.
But I still have a doud here, do you think it may be solved if I change the actual 8chip module for one 16chip module low density with the same caracteristics? I was told these were more compatible modules.
Any advise for this?
Thanks!
David

Similar Messages

  • 50L7300 upgrade doesn't work

    WOW! I went through 24 pages here and couldn't believe how many different problems were described and hardly any resolution was offered by Toshiba.  I bought this brand and model because others didn't have wired network connection and VGA input that I needed.  I was pretty happy with it, until I heard a buzz at certain voice frequencies during a talk show or documentary.  Although part of the problem was a cable on the back panel touching the TV housing, something in the TV still resonates sometimes.  This is clearly a sound problem, the tech wanted to replace the motherboard. After removing the motherboard he found that Toshiba sent him a different board so he put the original board back.  I bought the TV last November, the warranty expired and now "an upgrade is available” message comes up every time I turn the TV on.  You can select yes or no if you want to do the upgrade.  Needless to say the "upgrade" doesn't work, it downloads the files 100%, starts the "upgrade", blue screen, upgrade in progress, 1%, green light blinks and then nothing happens, the TV is back where it  was before, never completes the supposed "upgrade", no message to that effect. Toshiba can't find a resolution, the Help desk in Manila have no idea, they tell you to leave the TV on for hours during the "upgrade" and they will call you the next day to see if it completed...  You guessed it, he didn't call back and when I called again "JR" said he would tell the supervisor and he would call me back in 20 minutes... Two days later he called back but he had no idea what the solution was. They also gave me the phone numbers of two Toshiba authorized service agents, Video Doctor and Precision TV. When I called the former the tech said that you have to replace the motherboard that costs around $300. The latter would come out and charge $105 just to run diagnostics or $39.99 for a call… Toshiba’s suggested manual USB upgrade didn’t work either and second level support (supervisor) asked me what brand I used and try another brand of USB drive as part of the process of elimination before he can escalate it to the factory engineers..,. I guess their idea of support and problem solving is not the process of elimination but the elimination of process until the customer gets tired and goes away… I will never buy a Toshiba product again, I will stick to the best: Sony, Panasonic or LG…

    I totally sympathize with you! I had a very similar experience like a year ago with version 7.whocanremember. I was an idiot and I deleted itunes and had a **** of a time trying to get it reloaded. I had tried to downgrade with zero luck. I don't think you will be able to. When you install that new version you see that little window pops up that says updating library. Have you tried just reinstalling 7.6? That is what I am going to try. I've got an interesting problem that I will probably be posting if a reinstall doesn't fix it. Good luck to you!!

  • Jdev11g CPU profile and Memory Profile doesn't work for Mac

    I'm running Jdev11g on Mac OSX 10.5.5,
    CPU Profile and Memory Profile doesn't work. I got following message:
    Error occurred during initialization of VM
    Could not find agent library in absolute path: /Shared/jdevjavabase11110/jdeveloper/jdev/lib/profiler16.so
    The file actually is there. I don't understand why they looking for .so file, it supposed to be mapped as .jnilib on Mac.
    This is broken on TP4 as well.

    I'm still seeing this issue. Here is what I get:
    /System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Home/bin/java -client "-agentpath:/Users/kamleshnanda/Downloads/jdeveloper/jdev/lib/profiler16.so=port=60950,jarpath=/Users/kamleshnanda/Downloads/jdeveloper/jdev/lib/profiler-agent.jar,enable=t,depth=1000,startup=connect,time" -classpath /Users/kamleshnanda/jdeveloper/mywork/MyJavaApplication/Project1/classes project1.Class1 Hello
    Error occurred during initialization of VM
    Could not find agent library in absolute path: /Users/kamleshnanda/Downloads/jdeveloper/jdev/lib/profiler16.so
    Process exited with exit code 1.
    I'm using the following build:
    About
    Oracle JDeveloper 11g Release 1 11.1.1.2.0
    Java Edition Version 11.1.1.2.0
    Build JDEVADF_11.1.1.2.0_GENERIC_091029.2229.5536
    Copyright © 1997, 2009 Oracle and/or its affiliates. All rights reserved.
    IDE Version: 11.1.1.2.36.55.36
    Product ID: oracle.jdeveloper
    Product Version: 11.1.1.2.36.55.36
    Version
    Component     Version
    =========     =======
    CVS Version (External)     (CVS) 1.12.13 (client/server)
    Java(TM) Platform     1.6.0_17
    Oracle IDE     11.1.1.2.36.55.36
    PMD     JDeveloper Extension 4.2.5.3.0
    Team Productivity Center     11.1.1.2.36.55.36
    Versioning Support     11.1.1.2.36.55.36
    Here are the JVM properties:
    java.runtime.name     Java(TM) SE Runtime Environment
    java.runtime.version     1.6.0_17-b04-248-10M3025
    java.specification.name     Java Platform API Specification
    java.specification.vendor     Sun Microsystems Inc.
    java.specification.version     1.6
    java.vendor     Apple Inc.
    java.vendor.url     http://www.apple.com/
    java.vendor.url.bug     http://bugreport.apple.com/
    java.version     1.6.0_17
    java.vm.info     mixed mode
    java.vm.name     Java HotSpot(TM) 64-Bit Server VM
    java.vm.specification.name     Java Virtual Machine Specification
    java.vm.specification.vendor     Sun Microsystems Inc.
    java.vm.specification.version     1.0
    java.vm.vendor     Apple Inc.
    java.vm.version     14.3-b01-101
    Here is the OS information:
    os.arch     x86_64
    os.name     Mac OS X
    os.version     10.6.2

  • HT1222 Hey, I've tried to install the new iOS 7.1 but it says that the installation cannot be completed and doesn't say why. I have more than 50% battery left but it still doesn't work, help?

    Hey, I've tried to install the new iOS 7.1 but it says that the installation cannot be completed and doesn't say why. I have more than 50% battery left but it still doesn't work, help?

    It probably means you don't have enough available storage on your phone.  It takes space to store the download - THEN unpack it.  Best method is to use a computer with iTunes (This allows you to back up on your computer as well). 
    PLEASE:  Do not purchase iCloud storage space - this will not give you more room for the iOS 7.1 installation.

  • Lightroom 3.6 upgrade doesn't work

    After having installed the 3.6 upgrade I have problems every time I mark an image and select the Update tab. The image is not loaded and I have to force the program to halt.
    When I try to use the Adobe site to contact support my serial number for Lightroom 3 is not valid.
    I have seen others with similar problens on the forum and I hope Adobe can fix the problem soon as the program is currently not usable.
    I would appreciate if there is a way to go back to version 3.5?
    Regards,
    Rolf

    When I mark/select a imge in my library and the click the Develop module,
    the loading of the image never completes.
    Sorry, I used the term Update instead of Develop because I made a bad
    translation of my Swedish tab "Framkalla".
    I'm using Mac OS X 10.5.8.
    Rolf
    2011/12/15 Julie Kmoch <[email protected]>
       Re: Lightroom 3.6 upgrade doesn't work
    created by Julie Kmoch <http://forums.adobe.com/people/Julie+Kmoch> in *Downloading,
    Installing, Setting Up* - View the full discussion<http://forums.adobe.com/message/4087187#4087187>

  • Satellite A60-S1591ST: IrDA don`t work properly. Help!

    Hi! I have Toshiba Satellite A60-S1591ST.I preinstalled my operating system with the originall Toshiba Recovery and Application/Drivers DVD and after this i haven't IrDA.I tried everything, but my laptop didn't discover IrDA device.Please help me,how can i install my IrDA.Thanks.

    Hi,
    that sounds strange!
    Normally after doing a recovery the notebook is running with factory defaults! So also the Irda port should working!
    Did you checked the Device Manager entries if Irda is added?
    After that you can try to run the "Add new Hardware Wizard" and search for a Irda device!
    Also you should check if a Irda port is anywhere at the notebook cover! Not only a plastic dummy cover!
    I checked the internet and found some specs about your A60-S1591ST. In these I found nothing about a Irda!
    But other A60s have one!
    So check it and keep me posted!
    Bye Bob

  • Satellite A210 (PSAEG) - Microphone doesn't work on Windows 7 64bit

    Hello, the micro doesn't work under windows 7 64 bit, the driver I'm using is Windows Vsta 64 bit. The volume is set up maximun and so is the amplification but no way to make it work with skype or toshiba camera assistant software.
    Can anyone help me?
    thank you

    Hi Largo09,
    Usually you have to install the webcam and sound driver to get the microphone working. The microphone is a part of webcam
    As you wrote, Satellite A210 is not Windows 7 64bit supported so the only option you have are Vista 64bit drivers
    In my opinion you should check if Microphone is enabled in Windows sound settings. There you can also enable Microphone boost, that can increase the microphone volume.

  • HELP! Uploading AS3 Game to server, no sound and Spacebar doesn´t work HELP!

    Hello, relatively new to AS3 and flash, this is the first time i am publishing anything. We are trying to upload our simple flashgame to our webserver, the game works perfectly fine locally save for one thing. We get an error regarding TLF which says it wont stream or something. So when it gets online, no sounds play and spacebar doesn't work, left and right arrow does work. We have three TLF text fields that are used to update score, lives and show you final score. If i turn these into classical text they stop working.
    Things we have tried: Changing default linkage from RLS to Merged into code, changing the text boxes to classical text(they then stop working), made sure the paths are correct(all files are in the same directory including the .swz file)
    This is the code from the soundclass:
    package 
        import flash.net.URLRequest;
        import flash.media.Sound;
        import flash.media.SoundChannel;
        import flash.events.*;
        public class MySound
            private var bgSound:Sound;
            private var fireSound:Sound;
            private var waterSound:Sound;
            private var earthSound:Sound;
            private var lightSound:Sound;
            private var soundChannel:SoundChannel;
            public function MySound()
                soundChannel = new SoundChannel();
                bgSound = new Sound();
                var req:URLRequest = new URLRequest("BackgroundSound.mp3");
                bgSound.load(req);
                //fire
                fireSound = new Sound();
                var req2:URLRequest = new URLRequest("soundFire.mp3");
                fireSound.load(req2);
                // water
                waterSound = new Sound();
                var req3:URLRequest = new URLRequest("soundWater.mp3");
                waterSound.load(req3);
                // earth
                earthSound = new Sound();
                var req4:URLRequest = new URLRequest("soundEarth.mp3");
                earthSound.load(req4);
                // light
                lightSound = new Sound();
                var req5:URLRequest = new URLRequest("soundLight.mp3");
                lightSound.load(req5);
            public function playBgSound()
                soundChannel = bgSound.play(0, 999999);
            public function stopBgSound()
                soundChannel.stop();
            public function playFireSound()
                fireSound.play();
            public function playWaterSound()
                waterSound.play();
            public function playEarthSound()
                earthSound.play();
            public function playLightSound()
                lightSound.play();
    I can somewhat get that sound can bugg out, but why does spacebar stop functioning? ANy help is greatly appreciated as this has to be delivered in twelve hours(published online) for a school assignment.

    Also might add publishing it locally in my own browser everything works, as does ofcourse playing it in flash itself. Changing from RLS to merged into code stops the error from coming, but doesn´t fix the problem on the server.
    Code from main class related to sound and spacebar:
    import flash.display.*;
        import flash.events.*;
        import flash.ui.Keyboard;
        import flash.text.TextField;
        import flash.media.Sound;
        import flash.net.URLRequest;
        import flash.events.MouseEvent;
        import flash.utils.Timer;
        import flash.events.TimerEvent;
        public class main extends MovieClip
            private var fireTimer:Timer; //delay between shots
            private var canFire:Boolean = true;
            private var mySound:MySound;
            private var bulletSpeed:Number = -450;
              public function main()
                //load sounds
                mySound = new MySound();
            private function playGame(event:MouseEvent)
                gotoAndStop(2);
                // initialize
                myLives = 5;
                myHitsNo = 0;
                weaponType = 1;
                mybullets = new Array();
                enemys = new Array();       
                myScoreTxt.text = "Score: " + myHitsNo;
                myLivesTxt.text = "Lives: " + myLives;   
                fireTimer = new Timer(400, 1);
                fireTimer.addEventListener(TimerEvent.TIMER, shootTimerHandler, false, 0, true);
                stage.addEventListener(KeyboardEvent.KEY_DOWN, listenKeyDown);
                stage.addEventListener(Event.ENTER_FRAME, addEnemy);
                stage.addEventListener(Event.ENTER_FRAME, checkCollision);   
                player = new thePlayer(stage.stageWidth-40, spawnPoint2);// stage.stageHeight/2);
                stage.focus = player;
                addChild(player);
                mySound.playBgSound();
    public function listenKeyDown(event:KeyboardEvent)  // Controls and weapontype selector
                if (event.keyCode == 37) //left
                    player.movethePlayerDown();
                if (event.keyCode == 39) //right
                    player.movethePlayerUp();
    if (event.keyCode == Keyboard.SPACE) //space
                    shootBullet();
                    //soundFX.attachSound("Pistol Fire.wav");
                    //soundFX.start();

  • PC suite upgrade doesn't work.

    After an automatic upgrade at the version 6.81.13.0, the PC Suite doesn't work (before it were OK).
    I can't connect my 6680 with USB original cable and I can read this error message "Init IMediaControl2).
    My PC is a P4 3GHz, with 1024MB and Win XP SP2.
    Before the upgrade all works very good.
    What's happen?
    Thanks.

    Cannot recognize (Microsoft) antispyware prosess.
    Disconnected from internet (yes I got Internet connection back).
    Disabled firewall and antivirus. Started PC Suite (Repared it fron contol panel after system restore), Get connected does not react when DKU-2 is connected. As far as I remember when two weeks ago succeeded, some messages where seen (drivers installe or something) Now no messages.

  • Toshiba Satellite L450D-124 - Internet doesn't work

    Hello, suddenly my internet on my laptop stopped to work, everything should work since there is no sign of an error or something. According to my settings it should work but when i try to do something that requires internet connection it says that the webpage can't be viewed or internet doesn't work. Apperently it does work when i connect through lan. But through wifi it doesn't. Anyone can help me with this problem? I resetted my whole laptop so there couldn't be any virusses or something.
    Thanks in advance,

    Hi guys, thank you so much for your help!
    I tried to do the troubleshooting like suggested but unfortunately the screen does not show anything!!
    I am so disappointed with Toshiba since I have paid about 1000 bucks on this laptop and just after one month of the end of limited warranty it got a problem!!
    Please if you have another suggestion and troubleshooting please let me know.
    Remarks: I am living in Brazil and here we do not have an authorized Toshiba Service Center.

  • Stuck on apple logo and Home button doesn't work, help please?

    Well, I dropped my iPod Touch 4g by accident and since that day, the home button hasn't really been working that well. Its very hard to use since you have to press it in really hard to get it to work and sometimes it doesn't even work at all. Anways, I was skyping with my girl and I didn't notice that I had to charge the iPod and it died on me so I was like what ever its normal and started to charge it. When it turned on, it got stuck on the Apple logo and its been there for more than a day now? What can I do? I know about the Press Home + Sleep button together but the Home button doesn't work at all anymore. I tried everything really. I tried to connect it to itunes and see if I could restore it but it won't recognize it no matter where I connect it. Tried it on 3 different computers and none worked at all.  I can't take it to an Apple store since there isn't any close to where I live and I really don't have anyone to take me there. So is there any other solution to fix my problem at home? or is it messed up completely? Someone please help me

    I have this same issue. But also, it isn't just that the lock/home button stops working, all buttons stop working. Even if you switch it to silent sounds are still played. I just got my iphone Thursday. Went to school the next day and pulled it out, it happened while it was locked I guess because my screen was black and I couldn't do anything! Thought it died already! This was around 12. Finally I pulled it out of my pocket again at around 3 and it showed the Apple logo and acted like it had just started back up. Which is what always happens after I get stuck playing a game or something. Help please, has happened two or three times just today.

  • Touch Pad of Satellite P50-A-M13 doesn't work anymore - Solution

    Hello *,
    before someone should have the same problem, I wanted to share my problem and my solution here:
    Information about my system:
    I have installed Windows 8.1 Professional and Scientific Linux 6.5 in Dual Boot on my Toshiba Satellite P50-A-M13.
    _*Problem:*_
    The Touch Pad suddenly doesn't work below Windows 8.1 Professional anymore, the mouse pointer vanishes after a reboot. You can't deactivate/activate the Touch Pad with the F5 key (without pressing the FN-button) anymore. The white LED of the Touch Pad doesn't work anymore. Another operating system (in my case: Scientific Linux) in Dual Boot doesn't recognize the Touch Pad anymore after a reboot, too. So it isn't working below the other operating system anymore, too. It looks like a hardware defect since it affects more than one operating system.
    _*Additional information:*_
    If you attach an external USB mouse to your Toshiba notebook, the Touch Pad will work again, you can activate/deactivate the Touch Pad via the F5 key (without pressing the FN-button) below Windows 8.1 again, but the white LED of the Touch Pad still doesn't work and doesn't turn off or on. Same below another operating system in Dual Boot. The BIOS doesn't offer a feature that you can activate or deactivate the Touch Pad there.
    Reason:
    I had the problem that the feature "automatic driver installation" below Windows 8.1 Professional was activated. The driver for the Synaptic Touch Pad got replaced by a Microsoft driver in the background automatically.
    _*Solution:*_
    _Keep the external USB mouse attached and start Windows 8.1 if it isn't started already. Then deactivate feature "automatic driver installation" below Windows 8.1. Then reinstall the Synaptic Touch Pad driver from the download page of Toshiba website again. Then reboot Windows. The Touch Pad should work then again. And never, never activate the feature "automatic driver installation" below Windows 8.1 again!_
    Many thanks, Jana

    Thanks Jana for this post!
    I also noticed that sometimes Windows updates could break the driver functionality...

  • Atan in jdk1.1.8 doesn't work. help

    I am creating a program which simulate the effect of gravity on a object (for a game). For this I am working with jdk1.1.8. (not by choice). But for some reason the movement of the object just turns around. I believed that de method Math.atan2 was wrong so i have rewritten it and it worked better. But the method atan most likely doesn't work either because it is not perfect yet. Does anyone know or have an implementation of de atan method in java that works so i can use it? Because I don't know how the method works.
    maybe i am wrong here but it is basicly the only solution to my problem. if give the code of the bullet class with it. maybe anyone sees the problem there:
    import java.io.*;
    import java.awt.*;
    import java.awt.event.*;
    import java.util.*;
    public class Bullet extends Thread
         public static boolean running = false;
         private double x, y;
         private double width=10, height=10;
         private double weight=10;
         private double travelAngle = toRadians(45);
         private double speed=5;
         private Attraction hello;
         private Planet[] planets;
         private int planetCount=0;
         Bullet(Attraction hello, int x, int y, int angle, Planet[] planets)
              this.hello = hello;
              this.x = x;
              this.y = y;
              this.travelAngle = toRadians(angle);
              this.planets = planets;
              this.planetCount = planets.length;
              running = true;
         public void run()
              double px=0, py=0, g=0;//comes from the planet
              //variable for the calculation
              Planet p = null;
              double dx=0, dy=0, dx2=0, dy2=0, fdx=0, fdy=0, totalfdx=0, totalfdy=0;
              double forceAngle=0;
              double d=0, gd=0, force=0;
              double oldx = 0;
              double oldy = 0;
              int drawSteps = 0; //for smooth drawing
              double dxSteps=0, dySteps=0;
              double oldspeed = speed;
              while(running)
                   oldspeed = speed;
                   totalfdx=0;
                   totalfdy=0;
                   oldx = x;
                   oldy = y;
                   dx = Math.cos(travelAngle)*speed;//the normal translation for x without the gravity effect
                   dy = Math.sin(travelAngle)*speed;//the normal translation for y without the gravity effect
                   x+=dx;//new x from the normal translation
                   y+=dy;//new y from the normal translation
                   for(int i = 0; i<planetCount; i++)
                        p = planets;
                        px = p.getX();//x coordinate of the planet
                        py = p.getY();//y coordinate of the planet
                        g = p.getGravity();//gravity of the planet
                        dx2 = px - x; //the x-difference between the bullet and the planet
                        dy2 = py - y; //the y-difference between the bullet and the planet
                        //System.out.println(dx2 + " "+ dy2);
                        d = Math.sqrt(dx2*dx2+dy2*dy2); //the direct distance between the bullet and the planet
                        //System.out.println("distance " + d);
                        gd = g/d; //the effect of the gravity at the distance of the bullet
                        //System.out.println("gravitydistance" + gd);
                        force = gd*weight; //the forcepull on the object from the planet
                        forceAngle = atan2(dy2,dx2);//the angle of the force with the y-axis
                        //System.out.println("force " + force + " distance " + d);
                        fdx = force * Math.sin(forceAngle);//the force pull distance for x
                        fdy = force * Math.cos(forceAngle);//the force pull distance for y
                        //System.out.println(fdx + " " + fdy);
                        totalfdx += fdx;
                        totalfdy += fdy;
                   x = x+totalfdx;//new x
                   y = y+totalfdy;//new y
                   //System.out.println("Angle" + toDegrees(travelAngle));
                   travelAngle = atan2( (x-oldx), (y-oldy) );
                   speed = Math.sqrt((x-oldx)*(x-oldx) + (y-oldy)*(y-oldy));
                   if(oldx>x)
                        System.out.println("Turning point");
                   System.out.println(oldspeed + " " + speed);
                   //System.out.println("x=> " + x + " y=> " + y);
                   drawSteps = (int)(speed+1);
                   dxSteps = (x-oldx)/drawSteps;
                   dySteps = (y-oldy)/drawSteps;
                   x = oldx + dxSteps;
                   y = oldy + dySteps;
                   hello.repaint((int)x,(int)y, (int)width, (int)height);
                   for(int i = 0; i<drawSteps; i++)
                        x+=dxSteps;
                        y+=dySteps;
                        hello.repaint((int)(x-dxSteps), (int)(y-dySteps), (int)(width+width), (int)(height+height));
                        try
                             sleep(30);
                        catch(Exception e){}
                   hello.repaint((int)x,(int)y, (int)width, (int)height);
                   //hello.repaint();
                   try
                        sleep(100);
                   catch(Exception e){}
                   System.out.flush();
                   for(int i = 0; i<planetCount; i++)
                        p = planets[i];
                        if(p.contains(x,y))
                             System.out.println("Boom");
                             running = false;
              System.out.println("Bullet Stopped");
         public void draw(Graphics g)
         g.setColor(Color.cyan);
              g.fillRect((int)Math.round(x-width/2), (int)Math.round(y-height/2), (int)width, (int)height);
         public void move(boolean left, boolean right)
              if(left)
                   x--;
                   hello.repaint(x, y-2, width+5, height+5);
              if(right)
                   x++;
                   hello.repaint(x+1, y-2, width+5, height+5);
         public double toRadians(double angle)
              return (angle/180*Math.PI);
         private double toDegrees(double angle)
              return (angle/Math.PI*180);
         private double atan2(double a, double b)
              if(a>0)
                   if(b<0)
                        return (Math.atan(b/a)+(2*Math.PI));
                   return Math.atan(b/a);
              else if(a<0)
                   return (Math.atan(b/a)+Math.PI);
              else if(a==0 && b>0)
                   return ((Math.PI)/2);
              else if(a==0 && b<0)
                   return ((3*Math.PI)/2);
              else
                   return 0;

    I have allready tested my code to the max en I have redone the calculations about 4 times, because I couldn't believe the fault was in the method atan or atan2 from sun. But since my calculations should work in theorie (worked it out with a math teacher) it's the only options I could think of.
    [qoute]
    I haven't looked up in the API docs how atan2 is supposed to work, but I noticed these two lines in your code:
    forceAngle = atan2(dy2,dx2);//the angle of the force with the y-axis
    travelAngle = atan2( (x-oldx), (y-oldy) );
    In one place you use Y and X as the parameters and in the other case you use X and Y. They can't both be right.
    [qoute]
    In this case it is. because the forceangle is opposite the x-axis and thus the two must be reversed. (travelangle is opposite the y-axis).
    I have also tried to reverse them (for both) but the effect got worse :)
    Thanks anyway.

  • After updating to ios 7, my data doesn't work, help?

    After I updated it, my data doesn't work. Notifciations would pop up, but I cannot view it. My imesasge still works though.

    I also tried to restore my phone & reset my network... it doesn't work...

  • IPhone 4 sleep button doesn't work -help

    My Iphone4 on/off button is not working.  I cannot put my phone to sleep, to turn it off I have to use voice control, and to turn it back on I have to stick it on the charger.  I tried resetting it but that doesn't work.  Does anyone have a suggestion or has had the same problem.

    If you've done the usual restart, reset, and restore, and those haven't worked, it's time to bring your phone in to get checked out.

Maybe you are looking for