Satellite A60-S1591ST: yellow exclamation marks in the device manager

Hi,
Recently I formatted C: and installed XP professional. But after the installation, there were several problems.
First, in device manager, there are big yellow marks in SM BUS Controller, Video Controller (VGA Compatible).
How can I fix these?
Second, when I scroll down screen side bar to read or see some contents down in a certain site, my screen is so sensitive and waves simultaneously with moving or clicking of the scroll bar. Is it related with above devices?
My notebook is Toshiba Satellite A60-S1591ST, XP pro with SP2
I don't know how to recognize the model of motherboard
thanks in advance.

Hi
The problem can be solved very fast the yellow exclamation appears in the device manager because you didnt install the necessary drivers.
So you will now ask for the driver page ;) Am I right?
Well this is a Toshiba US notebook I think so ;)
Check this page:
http://www.csd.toshiba.com/cgi-bin/tais/su/su_sc_modSel.jsp
Choose the Satellite A60-S1591ST and you should get all needed drivers.
Regards

Similar Messages

Satellite Pro A120-145: yellow exlamation mark in the device manager

Hi all,
I have a Satellite Pro A120-145 running Win Xp Pro fully patched and up to date, I have a yellow exlamation mark against "serial" in non plug and play in device manager (when i click show hidden devices).
Could anyone tell me which driver is needed for this? I don't want to use the recovery disc as I have done a custom install to get rid of excess baggage which is included on the disc.
thanks in advance.

That troubleshooting guide that Juan28 posted is really good. If the driver of the unknown device is already available (i.e. after the recovery CD installation) you might find your way through.
In case you can't locate a suitable driver for your unknown device on your Laptop, you could try and download a freeware called "Unknown Device Identifier" from this site:
http://www.zhangduo.com/udi.html
This program will allow you to locate the device ID and make a search with it on the Internet.
Hope this will sort things out.
Regards
electrochain

Satellite 1700-300: No Lan port in the device manager

Hi Forum.
I am currently repairing a Sat 1700-300 and reinstalling windows ME (Yuk i know but it is the customers preference), however it doesn't show that there is any ethernet hardware on the system. There is an ethernet port on the back of the laptop but it just doesn't show up in the device manager.
My first though was that it may be disabled in Bios, which i have checked and there is no option there for ethernet.
Any idea's folks?

Thats a good question, however the work was only carried out on the hard drive and not the motherboard itself. The owner of the laptop has said that he has never been able to use the RJ45. My theory is that it was included on the board but never activated, hense the reason there is no metion of it in the specs or in the bios.
Is this very probable? and would a bios flash possibly resolve this issue?
Just to re-iterate, there is no entry in the hardware manager for the port or any unknown drivers at all.
The reason I posted on this forum is because it is a Toshiba forum, are there any Toshiba techies here or is this just a community forum?

Green check (or tick) symbols and yellow exclamation marks in the canvas

Dear All,
I've been editing several sequences for some DVD extras over the past month and have returned to my main edit to find every time I stop the edit there's a green check (or tick as we say in the UK) in the canvas window. And sometimes there's a yellow triangle with an exclamation mark. Does anyone know why these are now being displayed and how I can get rid of them?
All help very welcome.
Thanks Damon

Somehow you have switched on the Range Checker for excess Luma or Chroma which shows whether your video is within acceptable limits.
To switch it off go to View>Range Check and deselect what you don't want.

Satellite A350 - NO WLan LED, NO WLan in device manager

Hi,
I have same problem...
The led is not working, no F8 in flash cards, no wifi adapter in device manager.
The problem appeared after system's being reinstalled.
I tried everything (also from this thread) and including attempt to install new wifi adapter- same situation occures.
When I search the internet to find the solutions it apeared that many people had same problem after reinstaled the system.
Please help :)
(btw sorry for mistakes that can appear in this post- english is not my mother tongue ;)
Message was edited by: meraszka

Hi
> The problem appeared after system's being reinstalled.
How did you reinstall the OS?
Did you use the Toshiba Recovery disk?
If not then I assume that you have installed wrong WLan driver
> no wifi adapter in device manager.
Do you have a yellow exclamation mark in the device manager -> Network Adapters?
If yes, then this would mean that a WLan driver is missing
I dont know what WLan card you have but you can find all WLan drivers here:
http://aps2.toshiba-tro.de/wlan/
PS: ensure that BIOS is up to date and that it has been set to default settings.

Yellow exclamation mark--what does it mean?

Hello Aperture experts: I've just started using Aperture and am designing a book. Certain images I've chosen are posted on the layout page with a yellow exclamation mark in the corner. I get it that Aperture is trying to warn me about something, but what? Does anyone know? Thanks.

What are the pixel dimensions of the photo and what is the size you are printing it?
Depending on your personal quality expectations you may find that if you are close you will be ok - i often print photos with the warning knowing that it is my risk
Basically you should have at least 180 dpi to avoid a warning - so a full page 8.5 x 11 print requires a photos of 1530 x 1980 or larger - and remember that if you zoom the photo that reduces the dpi
LN

App Catalog ERROR "The action could not be completed. Try again later" Yellow exclamation mark

Hello, I have problem with access to App Catalog, when i try to access to App Catalog it's give error "The action could not be completed. Try again later" with yellow exclamation mark. I tried to make partial erase, I made full erase, I made Secure erase, but all these steps not helps.
I renew my firmware with latest webOSDoctor, but still nothing. Then I changed my Palm Profile, I create new one, but still NOT WORKING!
I checked all connections 3G and Wi-Fi, everything is ok, but App Catalog still not working.
So, I contacted with Palm Support, I told about this issue and I send them Quick Log and Log
with Description to [email protected]
Reference number for chat: Chat session ID number 89786521
Do you have any solution?
Best regards
Rufat Jalilov
Post relates to: Pre 2 p102una (Unlocked NA)

Honestly saying, the problem I had already a week, I tried to solve it on their own, but all my attempts were unsuccessful, I am sure that this problem is not related to what some of my actions, cause I never made any manipulations with phone.
I really appreciate the attention rendered by the support services, I just need that everything works fine.
I am sure that this is some sort of a strange problems, I have long been searching for an answer in the Internet came on similar way problems have other users.
I received today a update notice for App Catalog, I saw that HP Palm updated App Catalog, I updated my App Catalog, check again, but still nothing changed, same problem "The action could not be completed. Try again later" with yellow exclamation mark.
So, I will wait for a few days, will see what's happening.
Best regards
Rufat Jalilov

I am missing masters in aperture , getting an yellow exclamation mark , but still getting a preview of those pics .how to create a master .i have done rebuilding , repair , but still same?..please help

missing masters in aperture , getting an yellow exclamation mark ,

Q: Is there a way to place an image at 100% without having to do that extra resizing step?
I think here you want your images to fit in the full page size frame automatically. For this you can try the follwoing steps:
1. Create a new doc
2. Goto Object menu and choose Frame fitting options
3. Select Autofit and from Fitting drowdown, select "Fit content to frame". Refer the screenshot below:
After this you images should automatically fit in the entire page placeholder frames. Please let me know if this does not work or if the problem you are facing is different and I did not understand your problem correctly.
Regards,
Pooja

Clients losing Connections yellow exclamation mark still associated

We are having intermittent issue where clients just lose connectivity, they stay associated to the access point but get a yellow exclamation mark.
I have followed the steps in these post but still the issue persists. https://supportforums.cisco.com/thread/2194495
https://supportforums.cisco.com/thread/2002533
WPA2 802.1 x authentication.
We were getting this error before I made the changes
(Cisco Controller) >*dot1xMsgTask: Jan 31 11:58:25.140: 08:11:96:80:33:e0 Key exchange done, data packets from mobile 08:11:96:80:33:e0 should be forwarded shortly
*dot1xMsgTask: Jan 31 11:58:25.140: 08:11:96:80:33:e0 Sending EAPOL-Key Message to mobile 08:11:96:80:33:e0
state PTKINITDONE (message 5 - group), replay counter 00.00.00.00.00.00.00.02
*dot1xMsgTask: Jan 31 11:58:25.141: 08:11:96:80:33:e0 Updated broadcast key sent to mobile 08:11:96:80:33:E0
*Dot1x_NW_MsgTask_0: Jan 31 11:58:25.145: 08:11:96:80:33:e0 Received EAPOL-Key from mobile 08:11:96:80:33:e0
*Dot1x_NW_MsgTask_0: Jan 31 11:58:25.145: 08:11:96:80:33:e0 Ignoring invalid EAPOL version (1) in EAPOL-key message from mobile 08:11:96:80:33:e0
*Dot1x_NW_MsgTask_0: Jan 31 11:58:25.145: 08:11:96:80:33:e0 Received EAPOL-key in REKEYNEGOTIATING state (message 6) from mobile 08:11:96:80:33:e0
After I made the changes there are no errors in the debug just clients stops working with yellow exclamation mark, cannot reach default gateway.
We also recently enabled Rogue policies auto contain rogue on wire and Using our SSID.
WLC4402 7.0.235.0
We want to upgrade the WLC software but want to make sure it’s the issue.

Okay... well at least its not the WLC code or AP tht is an issue. RLDP whould only be used on monitor mode access points, When used with access points that serve clients, the AP when detecting a rogue, will drop all associated clients. The AP's will do rogue detection anyways, so no need enable RLDP.
http://www.cisco.com/en/US/tech/tk722/tk809/technologies_white_paper09186a0080722d8c.shtml
Thanks,
Scott
Help out other by using the rating system and marking answered questions as "Answered"

Yellow exclamation mark in references: What does it mean

In my c# project, i have references to c++/cli and native c++ projects under "references". (i need to have them there, in order to be able to use msbuild on my solution from the command line.). all of these projects have yellow exclamation marks overlayed
to the "reference" symbol. (vs 2010). i can't find any explanation what these symbols are supposed to tell me.
any ideas ?
WM_THX
-thomas woelfer
http://www.die.de/blog

Hi Thomas,
I think this behavior is a warning to user that the native dll referenced by C# project is not supported there.
And I cannot say if it is by design or just a bug, would you mind sharing the connect link here, so that others could see and vote on it?
In addition, for msbuild issue, you may try MSbuild forum for better suggestions/workaround.
Thanks for understanding.
Figo Fei
MSDN Subscriber Support
in Forum
If you have any feedback on our support, please contact
[email protected]
Please remember to mark the replies as answers if they help and unmark them if they provide no help.

Yellow exclamation mark

Yesterday when opening pictures in Camera raw a yellow exclamation mark started appearing on the upper right corner. This doesn't let me use Adjustment brush as the yellow exclamation mark appears every time I pick the brush and start using it on the picture. It's been like that for two days now. Any ideas?

I did try doing the ‘Purge Cache' now, but it's still the same.
With Ctrl +K you get the normal cache for preview and thumbs and that is not the same as the Camera Raw Cache.
Under the menu Bridge you will find just above the bridge Preferences the Camera Raw Preferences (at least, on a Mac) and in this window you find the option to clear the Camera Raw Cache, did you try that one?

IMovie Yellow Exclamation Mark - What's missing?

I have movies that I updated from iMovie 09. When loading the Project, in the Timeline, I see the title in the middle with a yellow exclamation mark. I'm not sure why this is there. I initially had music missing with red and some files missing for some Projects, but I fixed everything. It still shows the yellow exclamation mark. When I hover over it, nothing happens. I have an image of what it looks like. What am I missing from the Project?

Hi,
@Edwin
thanks for pointing me in the right direction Edwin. The problem was that I changed the name of the method after the def-file for the method has been created the first time. JDEV did not update the contents of this file (and/or the DataBindings.cpx). So the method name was wrong and I got errors running my test app.
I removed the task flow completely and set up a new one which is working as expected.
@Juan
for me it looked like I couldn't call the method defined as default action. I got errors (which I didn't read carefully) stating the the method was missing (something like ...#[bindings....} not found). My conclusion was that the exclamation mark in the diagram stating that bindings is unknown was the cause.
The real cause of the problem I described above.
Thanks
Timo

Ibook suddenly marks photos with yellow exclamation mark

Hi,
I have created several photo albums and had them published. I have always chosen my photos carefully to avoid the yellow exclamation mark. One of my projects was started several months ago and left untouched for a long time. When I went back to the project more than 50% of the photos were now marked with exclamation marks. Then I looked at books that I have finished and had published, and they too have exclamation marks on some photos. I went to a local Apple Store and the "geniuses" were stumped. Any ideas on what may have caused this spontaneous mutation...and how I can fix it?
Thanks
PS Changing the size of the book project does not seem to make a difference

Hi Maliha,
I followed your instruction to execute the exe file under C:\Drivers. After that, I rebooted the system and no more error pop up for the missing audio device. I checked the Device Manager and the Audio Device on High Definition Audion Bus disappeared and the SoundMax was shown. But again, still no sound. I clicked on TroubleShooting on that SoundMax and followed that instruction. I found out the default Sound device was erroneously pointed to BlueTooth. I made the change to SoundMax and voila ... the sweet ding sound came back.
That was a wonderful feeling to be able to fix this nagging problem that my company HelpDesk could not help me. All thank to this forum and particular Maliha. Again, my appreciation to the valuable help.

ITunesHelper Login Item - Yellow Exclamation Mark

Hey people!
I was checking my login items and saw that next to the iTunesHelper there was a yellow exclamation mark... It said that "this item could not be found"... I upgraded my OS to Mountain Lion and it is a bit slow.. You think this could be a contributing factor?

It's old. Remove it.
If you go into you iTunes settings, the checkbox to have it open iTunes when you attach a phone or ipad is what causes it to be placed in the login items.
Not likely.

T61 - No sound - Audio Device on High Definition Audio Bus with yellow exclamation mark

Hi,
I am not sure when it started but suddenly my T61 has no audio/sound. I checked the Device Manager and did see the Audio Device on High Definition Audio Bus with yellow (big) question mark with yellow exclamation mark superimposed on it. I downloaded, from Lenovo Support site, the 7ka114ww.exe , hoping to fix it by un-install that device, reboot it, and re-install using the download exe file, but to no avail.
Any suggestion or help is really appreciated. Many thanks in advance
PS. I also see the Base System Device pop up after a reboot and ask to be installed ?!? That pop-up had been there for a while before the audio/sound was lost.
Solved!
Go to Solution.

Hi Maliha,
I followed your instruction to execute the exe file under C:\Drivers. After that, I rebooted the system and no more error pop up for the missing audio device. I checked the Device Manager and the Audio Device on High Definition Audion Bus disappeared and the SoundMax was shown. But again, still no sound. I clicked on TroubleShooting on that SoundMax and followed that instruction. I found out the default Sound device was erroneously pointed to BlueTooth. I made the change to SoundMax and voila ... the sweet ding sound came back.
That was a wonderful feeling to be able to fix this nagging problem that my company HelpDesk could not help me. All thank to this forum and particular Maliha. Again, my appreciation to the valuable help.

Satellite A60-S1591ST: yellow exclamation marks in the device manager

Similar Messages

Maybe you are looking for