Satellite A65 freezes and does not respond after adding of RAM

Gents,
My laptop Satellite A-65 has been upgrade from 512 MB RAM to 1024 RAM. It recognized additional memory without any problem (as it should be according to manual).
But unfortunately after 1 day it begun suddenly stops, pictures on screen freezes, laptop does not respond at all - only reset (pushing and holding power button) can help. some times laptop is able to work 2 or 3 hours, but then again stops.
Memory place cover is rather hot, fan very often work uninterruptibly. so i can't decide whether problem is in new memory card or not enough cooling or might be in changing of BIOS version (or BIOS setttings) and might be memory becomes full and does not clear itself properly (last remark was found on some forumes).
Experts, help to find exact reason especcially if u had similar problem.

Hi
Im not expert but I would recommend removing the new memory module and let run the notebook only with the standard memory module.
If the notebook will not hang and will not freeze then its a very clear case for me.
Either the second module is not compatible or faulty.
In my opinion you should use branded modules like Kingston for example. The quality is much better as a no-name module.
Additional use the modules recommend by Toshiba

Similar Messages

  • Satellite U305-S7432 freezes and does not respond sometimes using Win XP

    Hello.
    I have a Satellite U305-S7432 notebook.
    Originally it came with Vista but I reformatted with XP Pro. I have installed all updates up to service pack 3.
    My problem is that sometimes when I try to restart the computer it simply freezes and does not respond at all to any input. I notice that this happens if I close and later open the lid (meaning that the computer goes input standby mode and comes back).
    Please note that the standby mode works perfectly fine and the computer leaves standby fine but afterwards when I try to restart, the computer will simply hang instead of restarting.
    If it never enters standby mode, the restart takes place as expected.
    I have installed all drivers and there are no question marks in Device Manager. I updated to the latest chipset driver from Intel (for the mobile 965) as well. Lastly, I also tried adding /forceresetreg to my boot.ini (as suggested by: http://support.microsoft.com/kb/822624) but to no avail.
    Any ideas?

    This is a Toshiba US notebook series and you should check the Toshiba US driver page for available drivers:
    http://www.csd.toshiba.com/cgi-bin/tais/su/su_sc_home.jsp
    If you will not find the XP drivers at this page then you could try to install some single drivers for Sat U300 from the Toshiba European page but Im not quite sure if such XP drivers will run on you Sat U305. But its worth a try!
    Good luck

  • Hello. I have this situation: iphone 5s freezes and does not respond. connect to itunes to restore it, but there says that I should turn off search by icloud in the settings of cellphone. but if the phone freezes?? what to do?? help me please!!

    Hi. I have this situation: iphone 5s freezes and does not respond. connect to itunes to restore it, but there says that I should turn off search by icloud in the settings of cellphone. but if the phone freezes?? what to do?? help me please!! Thanks advanced!!

    Check for hardware issues
    Related errors: 1, 3, 10, 11, 12, 13, 14, 16, 20, 21, 23, 26, 27, 28, 29, 34, 35, 36, 37, 40, 1000, 1002, 1004, 1011, 1012, 1014, 1667, or 1669.
    These errors mean that your device or computer may have a hardware issue that's preventing the update or restore from completing.
    Check that your security software and settings aren't preventing your device from communicating with the Apple update server.
    Then try to restore your iOS device two more times while connected with a cable, computer, and network you know are good.
    Confirm that your security software and settings are allowing communication between your device and update servers.
    If you still see the error message when you update or restore, contact Apple support.

  • TS1559 wi-fi does not respond ; in settings when i get to screen: chose a network even that wi-fi is on the whole screen freezes and does not respond to touch. i have to press home button to go out. settings point is not coresponding either (in top left c

    wi-fi in settings does not respond to touch, page becomes frozen and i have to out from it with home button. can not choose network or anything on that screen!?

    noelani72 wrote:
    I'd be curious to go buy an old Linksys WRT54G Wifi Router and see how the iPads work on it....but my lord, I have already spent so much time on this issue as it is.
    Message was edited by: noelani72
    Unless you get that WRT54G for free or next to free, pass on it and pick up an old apple WAP off eBay or similar site. Like you my iPad has a connectivity problem with the WRVS4400N running iOS 4.2.1, where it didn't have trouble with iOS 3.2.2 and ran fine for five months.
    My solution at the office was to spur a second router off my DSL router just for the iPad. The first was a WRT54G that had to be set to only one 802.11 protocol to keep the iPad reliably connected, but swapped it out for an old airport extreme that I kept on after testing it to be good. With a home network like you describe, I would run a subnet off the WRVS4400N just for iPad using an apple WAP (the configuration app for Windows is easy to use).
    Good luck.

  • Finder freezes and does not respond

    I have an iMac with an Intel Core i3, using Mac OS X - 10.6.8 Snow Leopard.  My finder continually freezes up on me and I have to re-launch the finder various times a day (I'm talking like 30 times a day sometimes).  I use a lot of actions in Photoshop and a lot of AppleScripts to make particular files all day long.  Sometimes Photoshop will hesitate for about a minute when trying to save tiffs - I usually re-launch the finder and it does fine for awhile.  I use to run a script that build my PDF file a certain way and would freeze up when it was using an action in the script to make a picture of it to put it on another server.  Now I'm using another more advanced script and it freezes inbetween the making of multiple PDF files - until I re-launch the finder, then it continues.  There have been various times no matter what I'm doin, the finder would - "not respond".  During these times it would make Illustrator and Photoshop to "not respond", sometimes I have to force quite programs, other times I just re-launch the finder and then everything responds good - for a time.  The odd thing about this, is I have swiched machines, using all the same versions and programs, scripts and actions, and still does the same thing.  I have moved around the room connecting to another ethernet thinking it might have been the connection, but no luck.  I seem to be the only one in my department that has these type of issues to this magnitude.  Other people here have had freezes and glitches, but not like me. I use a lot of personalized key commands and the only thing I can think of, is the combination of my personalized key commands in all programs, all the actions and all the scripts I use, may be a little too much for the iMac with Snow Leopard to handle.  Plus we are hooked up to multiple servers with the scripts telling certain files to go to certain directories.  Note: simply restarting does not fix any of this.  Does anybody have any ideas about this issue???

    You can remove the volume from /Library/Filesystems/Xsan/config/automount.plist . Then you mount manualy with the following command:
    mkdir /Volumes/<volname>
    mount -t acfs volname /Volumes/Volnames
    from xsan 2.0 you can use the xsanctl command to mount:
    xsanctl mount <volname>
    I do not use 2.0 yet, so did not test it.
    An empty automount.plist looks like this:
    <?xml version="1.0" encoding="UTF-8"?>
    <!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
    <plist version="1.0">
    <dict>
    </dict>
    </plist>

  • My firefox crashes withou displaying a crash message, freezes and does not respond majority of the time. what is wrong and what do i do?

    When i start Firefox it either
    1) crashes, no crash message displayed. just closes as if nothing happened.
    2) freezes, doesn't respond to anything and i have to "kill" it with task manager because if it froze and i try to click elsewhere like to show desktop or on another task it freezes the entire computer. It freezes in 3 ways:
    1) is when i just opened it and it freezes immediately
    2) when i click on it, or start typing some address into the bar
    3) when i press enter after I've typed the URL in the address bar.
    my Firefox doesn't have any add-ons, or anything else. i already re-installed it 2 times, cleared cache, history, reset all settings. still crashes

    Try to disable hardware acceleration in Firefox.
    *Tools > Options > Advanced > General > Browsing: "Use hardware acceleration when available"
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
    *https://hacks.mozilla.org/2010/09/hardware-acceleration/
    Try to boot the computer in Windows Safe mode with network support (press F8 on the boot screen) as a test to see if that helps.

  • I have Lightroom 5.7.1, boxed edition. When I open the software, it freezes and does not respond.

    When I open Lightroom, it doesn't respond and gives me the aptly nicknamed "Spinny Beach Ball of Death."
    I have a Late 2009 iMac that meets all system requirements, running OS X Yosemite 10.10.3.
    It has been working with these specs before, and just now started acting up.
    Thanks!

  • My IPAD 2 is freezing on the principal internet explorer page.  It presents the google home page with a grey filter over it and does not respond to any touch or key.  All other internet dependent functions seem to be working (i.e. mail, various APPs etc.)

    My IPAD 2 is freezing on the principal internet access page.  It comes up through a light grey filter and does not respond to any touch or keys.  All other internet dependent functions seem to be working fine (mail, various APPs).  How do I "unfreeze"?
    thanks
    geoff1949

    Geoff-
    Go to Settings-Safari and Clear History and Clear Cookies and Data.
    Another thing you can try is to double-click the Home button.  A row of recent Apps will line up along the bottom of the screen.  Scroll across and find the Safari icon.  Press on it for a couple of seconds until it starts to wiggle.  A red minus sign will appear on each icon.  Press on Safari's minus sign to remove it.  This may clear its memory of the bad Google page.
    If this does not help, try resetting (rebooting) the iPad.  Hold both the Home and Sleep buttons for several seconds until the Apple logo appears.  Ignore the "Slide to power off" arrow.  The iPad will restart after a couple of minutes.  Resetting this way will not hurt anything, and sometimes clears up mysterious problems.
    Fred
    Message was edited by: Fred*M.

  • TS1456 When it is trying to restore it freezes and does not restore.

    When it is trying to restore it freezes and does not restore.

    If no error messages
    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • When receiving email, Thunderbird freezes and displays "Not Responding" in screen header. Adds popstate folder to account.

    I'm running Thunderbird 31.6.0 on Windows 8.1 with BitDefender 2013.
    PROBLEM:
    When getting email, Thunderbird freezes and displays "Not Responding" in screen header.
    When TB is closed then reopened, a popstate folder (popstate-1.dat) is added to account. A new popstate folder appears with each crash/freeze, and as long as they are not deleted, they pile up with unique numbers (popstate-1.dat, popstate-2.dat, etc.).
    (see attached screenshot)
    NOTE: I've included troubleshooting details below for all the fixes I tried, thinking it might be helpful to anyone who has a similar problem and is thinking about going down those paths. Ultimately, it seems that FIX ATTEMPT 5 is the winner.
    ==================================
    FIX ATTEMPT 1:
    Following the suggestion in this archived mozilla support post: https://support.mozilla.org/en-US/questions/1026288, I restarted Thunderbird in Safe Mode (Help > Restart with Add-Ons disabled...), checking the "Disable all add-ons" and "Reset toolbars and controls" and clicking "Make Changes and Restart" button.
    In Add-Ons Manager, BitDefender Toolbar now appears to be disabled.
    (see attached screenshot)
    But the problem persists.
    FIX ATTEMPT 2:
    Following the suggestion in this archived mozilla support post: https://support.mozilla.org/en-US/questions/1016811, I clicked Help > Troubleshooting Information > Show Folder button. This opens a File Explorer window for 3I58b9dq.default (this is the "profile" folder) which contains panacea.dat and folderTree.json files.
    I changed file names to panacea-changed.dat and folderTree-changed.json (rather than deleting them, in case I need to restore them), and I reopened Thunderbird.
    This did not solve the problem -- and, furthermore, the profile folder seems to have automatically generated new panacea.dat and folderTree.json files to replace those for which I changed the filenames.
    FIX ATTEMPT 3:
    Following the suggestion in this mozilla support post: https://support.mozilla.org/en-US/questions/1044774, I restarted Windows 8.1 in safe mode with networking enabled (using these instructions: http://www.howtogeek.com/107511/how-to-boot-into-safe-mode-on-windows-8-the-easy-way/.)
    TB does not crash when Windows runs in safe mode, but the aspect ratio of my display is distorted; everything's really big and stretched horizontally, and my two displays are mirrored rather than extended. Running Windows perpetually in safe mode is not the ideal fix.
    QUESTION 1: I understand that troubleshooting is supposedly done best in safe mode — What might I do in safe mode to diagnose the Thunderbird problem?
    FIX ATTEMPT 4:
    This article https://wiki.mozilla.org/Thunderbird:Testing:Antivirus_Related_Performance_Issues#Symptoms, suggests that problems with Thunderbird associated with BitDefender can be solved by uninstalling and re-installing BitDefender.
    Not really comfortable uninstalling and re-installing, I disabled Bitdefender (Settings button > Antivirus button > Shield tab > On-Access Scanning toggle Off) to see if that would work. It did not fix the problem.
    QUESTION 2: Would uninstalling BitDefender be any different than disabling it?
    FIX ATTEMPT 5:
    Create a Bitdefender Exclusion for the Thunderbird folder:
    Settings button > Antivirus button > Exclusions tab > Excluded files and folders link > Add button > navigate to Thunderbird folder (c:\users\username\appdata\roaming\thunderbird) > Both radio button > Add button > OK button
    THIS FIX DID THE TRICK! YAY!

    FIX ATTEMPT #5 above did the trick, and now I see that it was the chosen solution for a similar post of the same problem at https://support.mozilla.org/en-US/questions/1044774

  • My Adobe acrobat X Pro does not respond after a minute I open up a pdf file

    I recently have installed Adobe Master Suite CS6 Collection. My Adobe acrobat X Pro does not respond after a minute I open up a pdf file. This happens every time when open a new pdf file. My operating system is Windows 7 pro ( Lenovo-64 bits). Any suggestions would be appreciated !!

    Mylenium
    Thank you for the suggestions.
    I checked the WIndows log files. It reported the following error:
    The program Acrobat.exe version 10.1.1.33 stopped interacting with Windows and was closed. To see if more information about the problem is available, check the problem history in the Action Center control panel.
    Process ID: 4770
    Start Time: 01d0079a09bba381
    Termination Time: 13
    Application Path: C:\Program Files (x86)\Adobe\Acrobat 10.0\Acrobat\Acrobat.exe
    Report Id: 4f145db6-7391-11e4-8fc1-005056c00001
    I ran for the memory diagnostics as it showed the error with video card error. My NVDIA graphics card is not working properly. Do you think that could be a problem?I am running on Windows 7 64 bit computer. It also complains about the incompatibility with 64 bits.
    Thank you.

  • I recently created an account and bought a movie. But any time I press "Play" iTunes freezes and will not respond at all.

    Windoes 7 64bit
    I recently created an account and bought a movie. But any time I press "Play" iTunes freezes and will not respond at all.
    I have tried both uninstalling the software and reinstalling it, I have tried to run the software in safemode, and I have tried to change the Quicktime settings to see if that helps.
    Nothing has worked. It always does the same thing, where it freezes the moment I tell it to "play".
    I have tried to use my other computer instead, going through the same process and I got the exact same result where it freezes.
    Therefore it has to be something to do with the software, because the computers use different graphics cards, yet it responds the same.

    Hi Canon-Thought!
    I have an article here for you that deals with this exact issue. You may have already completed many of the steps that this article will suggest, but look over it to see if it suggests something you haven't already tried:
    iTunes for Windows Vista or Windows 7: Troubleshooting unexpected quits, freezes, or launch issues
    http://support.apple.com/kb/ts1717
    Also, I suggest paying close attention to the list of programs that you would need to uninstall, in order, so that you can fully uninstall iTunes and all related components from your computer. If those programs and steps are not followed exactly, you may end up with issues using iTunes.
    If this issue only happens with one singular movie, you may need to report that there is an issue with your purchase. We have an article for doing that, and it can be found here:
    How to report an issue with your iTunes Store, App Store, Mac App Store, or iBookstore purchase
    http://support.apple.com/kb/HT1933
    Thanks for being a part of the Apple Support Communities!
    Regards,
    Braden

  • My iPhone 4 ios5 has suddenly stopped giving me the option to join any wifi network. The 'wifi' line in settings has gone grey and does not respond to touch. How can I get it back? AW

    My iPhone 4S ios5 has suddenly stopped letting me connect to any wifi. The wifi line in settings has gone grey, reads 'no wifi' and does not respond to touch. How do I get reconnected?

    HI there,
    You may want take a look at some of the troubleshooting steps found in the article below.
    iOS: Wi-Fi settings grayed out or dim
    http://support.apple.com/kb/ts1559
    Hope that helps,
    Griff W.

  • HT201412 My Ipad is not responding.  It has the small apple in the middle of the screen with the little "thinking" flower symbol surrounding it, and does not respond to restoring. We received an error message when trying to restore from itunes.

    My Ipad is not responding.  It has the small apple in the middle of the screen with the little "thinking" flower symbol surrounding it, and does not respond to restoring. We received an error message when trying to restore from itunes.

    What to Do When Your iPad Won't Turn On
    http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/TS3281
    iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
    http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
    iPad: Basic troubleshooting
    http://support.apple.com/kb/TS3274
    iOS: Resolving update and restore alert messages
    http://support.apple.com/kb/TS1275
    iPad: Unable to update or restore
    http://support.apple.com/kb/ht4097
     Cheers, Tom

  • TS3274 how do I get the keyboard to come up -- without re-botting?  On the ipad2, it occasionally freezes and does not permit the keyboard to appear

    how do I get the keyboard to come up -- without re-booting?  On the ipad2, it occasionally freezes and does not permit the keyboard to appear

    Have you the latest iOS version (5.1.1)? If not, an update might solve the problem.

Maybe you are looking for