Satellite A65-S126: Cannot find the RTC battery

I have my machine turn down but cannot find the batteries to replace them. Based on Toshiba support the P/N are P000444350 but there is no such item in the case that I can see. Any ideas..?
Even the disassembly manuals online do not show them.
I know there must be something in here.
Also according to the operation manual these batteries take power from the main battery.
Since my main battery is completely dead, would this account for the time snyc issue I'm having with the RTC batteries; since they are not getting power to recharge??

Sorry for my misunderstanding but what battery do you mean exactly.
Do you mean the main battery or the tiny RTC battery which is fixed on the motherboard?!
> Also according to the operation manual these batteries take power from the main battery.
This is not exactly right.
The RTC battery provides power to the motherboard therewith the internal clock and the BIOS can run 24/7.
It does no matter if the main battery is empty. The RTC should provide the power to motherboard for several times also if the main battery is empty.
If the RTC battery is empty the motherboard cannot be provided with power and the internal clock, BIOS will be reset.
In such case you have to connect the main battery and the AC adaptor to the notebook and let the battery charge for about 12 hours.
For details please check the user manual -> battery chapter
best regards

Similar Messages

  • Satellite P300-190 - Cannot find the Stereo mix in sound settings

    Hi,
    maybe this question is posted before, but i can't seem to activate the stereo mix option in my sound settings.
    It is simply not there.
    Does anyone know how to solve this? Or isn't it possible.

    Hi
    As far as I know the Realtek sound chip supports StereoMix.
    But if your notebook has been equipped with the Conexant sound chip then you would not find the StereoMix anywhere.
    One of my notebooks supports Realtek sound chip and Vista is running there.
    In control panel -> sound -> recording I clicked right and enabled the option called Show hidden devices and Show disabled devices.
    Then StereoMix appeared in my sound settings.
    But as said above, this is supported only by Realtek sound chip

  • Re: Satellite M35X-S149 - Cannot find correct battery to this model

    I can not find the correct battery to this model.
    I have looked on Toshiba websites, but I haven't find yet.
    That model doesn't recognize by toshiba tool finder.
    If somebody has some idea where I can find suitable battery I will be grateful.
    Battery model No is: PA3395U-1BRS

    Hi
    You have already posted the battery model number.
    Where is the problem? Google for this battery and Im sure you will get some online dealers who could provide this battery.
    Otherwise get in contact with an Toshiba ASP in your country and order the compatible battery.

  • Portege M100 - How to replace the RTC battery?

    Hello, the RTC battery of my Portege M100 is flat. I manage to order one from the internet but I can't locate it. I dismantle almost every part of the computer, but if someone could just guide me and give the procedure du replace it, it would be great. Thanks in advance!!

    Hi friend,
    its easy to replace the RTC battery on your machine. I did it already and I had no problems during the replacement, I mean it was a little bit tricky to find the batt. but I will give everything from my experience. ;)
    Look first at the wireless lan card, theres a slot an under the slot is the minipci-wlan-card located. Near the wireless lan card slot is some little cover, this cover must be removed (gently). The RTC battery is located in some white insulator, but before peeling that little battery out, you must disconnect the battery from the mainboard. After disconnecting it, just lift the RTC up and place the new one there.
    Thats all, unfortunately I cannot serve you with some pics, so you will have to imagine it by yourself. ;)
    Good luck and greets
    P.s.: If you feel uncomfortable in replacing the batt, then ask some techie to help you.

  • HT204291 I seem to have tried all of the above, but still cannot find the airplay symbol on my Ipad 2. Any suggestions ?

    I cannot find the airplay symbol on my Ipad 2. I have tried all suggestions in te troubleshooting guide, but still no success. Please help.

    Have you left the iPod to charge for a couple of hours and then tried resetting it again? It can take up to at least 30 minutes of charging before an iPod with a dead battery shows any signs of life.  By a reset, I assume you mean pressing and holding both the Select/Center and Menu buttons together long enough for the Apple logo to appear?
    iPod won't turn on
    B-rock

  • Cannot find the object "CrossRef" in Active Directory

    I am trying to install Lync 2013. I'm getting the following error: Error:
    An error
    occurred: "Microsoft.Rtc.Management.Deployment.ActiveDirectoryException" "Cannot
    find the object "CrossRef" in Active Directory."
    WARNING: Enable-CSAdForest failed.
    This error is at "Step 3: Prepare Current Forest" of the install.

    I've tried to run the forest prep as a local domain and I get the following:
    Creating new log file "C:\Users\administrator.xxx\AppData\Local\Temp\2\Enable-CSAdForest-052cfe14-7f42-4969-88da-83279413ab8c.xml".Enable the Active Directory forest to host Lync Server 2013 deployments.
    Prepare Forest Active Directory settings execution failed on an unrecoverable error.Creating new log file "C:\Users\administrator.xxx\AppData\Local\Temp\2\Enable-CSAdForest-[2013_05_30][13_25_56].html".WARNING:
    Enable-CSAdForest failed.WARNING: Detailed results can be found at "C:\Users\administrator.xxx\AppData\Local\Temp\2\Enable-CSAdForest-[2013_05_30][13_25_56].html".Command
    execution failed: Container CN=Microsoft,CN=Program Data,DC=xxx,DC=local not found

  • Cannot find the XObject named Fm0003.

    I am built a three page AOD report. When I run Test Presentment, the first two pages of the pdf display correctly on the screen, as I page down. When I page down to the third page I get the above message --"Cannot find the XObject named Fm0003". I click OK, and then get the following message --"Could not find font in resource library, using Helvetica instead". The font that I'm using throughout the report is a Times New Roman. The first two pages are in Times New Roman and the third page is in a different font. I welcome anyone who can educate me to what is happening in AOD. Thanks.
    Questions:
    * How do I find the XObject named Fm0003?
    * How do I determine what font is missing from the resource library?

    Found this post when troubleshooting the error message "Could not find Xobject named '3'". If anyone else runs into the same issue when creating a PDF by importing from a scanner, my issue was a bad cmos battery that set the incorrect date. I changed the date and time to current and was importing PDFs again.

  • I cannot find the serial number in my macbook.

    I cannot find the serial number in my macbook. I had check it already . But it had written  System Serial in the Serial number bar . I also put out the battery . I can see the label , but the i can not see clearly. Many of numbers are missing. Please Help. How can i find the serial number?
    My bOx and my recipet are missed already.Please help. I cannot log in the facetime and message .....
    I am using macbook pro 2008 C2D 2.5GHz

    Open About This Mac and click on the OS X version number, it will change to (first) the build number and (second) the machine serial number.

  • "Windows could not start the offline files service on local computer. Error 3: The system cannot find the path specified"

    Using Windows 8.1 Pro on Toshiba Satellite i7 Laptop with 8Gb Ram
    After upgrade from Windows 8 Pro to 8.1 Pro, the Offline Files/CSC service refuses to start and gives the error message:
    "Windows could not start the offline files service on local computer. Error 3: The system cannot find the path specified"
    Before the upgrade, offline files worked fine... how do I re-enable offline files?

      I had a similar issue -  couldn't make any files available offline.
    I found that the offline folder service would not start
    This was because the CSC permission were totally screwed.  I had to take ownership of each folder and file, one by one, then grant everyone full access.
    then delete the full contents of the CSC folder
    format the CSC database using the registry fix then reboot
    in control panel, disable the offline files,  reboot, then re-enable.  and now its working :)
    2hrs to resolve this, with grateful thanks to this thread and some others.
    damn windows8

  • Why does my itunes say it cannot find the disc burner or software when I'm trying to burn a CD?

    Why does my itunes say it cannot find the disc burner or software when I'm trying to burn a CD? I've burned CD's before...even earlier today and all of a sudden it started saying that and wont burn my CD

    Microsoft Windows 7 x64 Home Premium Edition Service Pack 1 (Build 7601)
    TOSHIBA Satellite C655
    iTunes 11.0.0.163
    QuickTime not available
    FairPlay 2.2.32
    Apple Application Support 2.3.2
    iPod Updater Library 10.0d2
    CD Driver 2.2.3.0
    CD Driver DLL 2.1.3.1
    Apple Mobile Device 6.0.1.3
    Apple Mobile Device Driver 1.62.0.0
    Bonjour 3.0.0.10 (333.10)
    Gracenote SDK 1.9.6.502
    Gracenote MusicID 1.9.6.115
    Gracenote Submit 1.9.6.143
    Gracenote DSP 1.9.6.45
    iTunes Serial Number 00*****950
    Current user is not an administrator.
    The current local date and time is 2012-12-11 16:09:24.
    iTunes is not running in safe mode.
    WebKit accelerated compositing is enabled.
    HDCP is supported.
    Core Media is supported.
    Video Display Information
    Intel Corporation, Intel(R) HD Graphics Family
    **** External Plug-ins Information ****
    No external plug-ins installed.
    iPodService 11.0.0.163 (x64) is currently running.
    iTunesHelper 11.0.0.163 is currently running.
    Apple Mobile Device service 3.3.0.0 is currently running.
    <Edited by Host>

  • Setting up my new Airport Extreme and it cannot find the IP address?  The modem works fine when I bypass the Airport.

    Setting up my new Airport Extremem and it cannot find the IP address.

    Re: Airport Extreme IP Address Issue
    After hours of trying everything else, this worked!!!
    From: Comcast Networking/Router/Wifi Gateway:
    Re: Airport Extreme IP Address Issue
    11-20-2012 07:11 PM
    MyComputerGuyJo:
    I just wanted to add what Apple Support walked me through. Worked perfectly. Similar to some of the posts here. This assumes you have finished the setup of the Airport using DHCP to obtain the IP automatically from Comcast and it says the IP is invalid.
    Power off\on Sequence
    1, Power off Comcast Modem. Remove Battery back up, if it has one. Disconnect the coax cable.
    2. Power off Airport Extreme
    3. Let both sit for 3 minutes.
    4. Reconnect coax cable to Comcast modem and replace battery and power up.
    5. Wait a minute or two to make sure the Comcast modem is completely up and then Power on the Airport Extreme.
    (When AP asks for DNS, Type in both addresses below)
    Re: Airport Extreme IP Address Issue
    11-01-2012 03:07 PM
    Freyfisher: I had the same problem whenn I switched to the Airport Extreme yesterday.  Here is what I did:
    1:  uplugged modem for 30 sec. and detached all ethernet cables.  Plugged back in and reattached airport extreme cable after all lights were solid on the modem. Then, I went into Airport Utility and selected, "Base Station"> "restore default settings".  Then" Base Station"> Restart.  Then go through setup assistant again.  If no luck, try setting IPv4 to 10.0.1.2, subnet to 255.255.255.0, router to 10.0.1.1. IPv6 set to OFF if having trouble.  DNS adresses: 75.75.75.75, 75.75.76.76, search domain hsd1.ST.comcast.net where "ST" is your two-letter State abbrev.  Hope this helps someone....

  • In the new Pages 5.0, what is the page break shortcut key. I cannot find the key as indicated on the drop down menu.

    in the new Pages 5.0, what is the page break shortcut key (it used to be the Fn + enter). I cannot find the (new) key as indicated on the drop down menu. Please help.

    Hi Bruce and fruhulda,
    ok, I found the keyboard viewer, it only shows the traditional symbol 'return'.  something like a sideway u-turn continued with the arrow under.  This is the Canadian or US keyboard. 
    btw thanks for your suggestion.

  • Can not receive Mac mail -error Outlook cannot find the server. Verify the server information is entered correctly in the Account Settings, and that your DNS settings in the Network pane of System Preferences are correct.  Account name: "MacMail"

    Can not receive Mac mail -error Outlook cannot find the server. Verify the server information is entered correctly in the Account Settings, and that your DNS settings in the Network pane of System Preferences are correct.  Account name: "MacMail"
    What are the correct mail account settings and more importantly the correct DNS settings
    Thank you for any help you may be able to provide
    Cheers
    Chris (iMac i7)

    Do not delete the old account yet. sign up for an iCloud account if you haven't.
    I understand .mac mail will still come through. Do not delete the old account yet.
    You cannot use .mac or MobileMe as type of Account, you have to choose IMAP when setting up, otherwise Mail is hard coded to change imap.mail.me.com to mail.me.com & smtp.mail.me.com to smtp.me.com, no matter what you try to enter.
    iCloud Mail setup, do not choose .mac or MobileMe as type, but choose IMAP...
    On second step where it asks "Description", it has to be a unique name, but you can still use your email address.
    IMAP (Incoming Mail Server) information:
              •          Server name: imap.mail.me.com
              •          SSL Required: Yes
              •          Port: 993
              •          Username: [email protected] (use your @me.com address from your iCloud account)
              •          Password: Your iCloud password
    SMTP (outgoing mail server) information:
              •          Server name: smtp.mail.me.com
              •          SSL Required: Yes
              •          Port: 587
              •          SMTP Authentication Required: Yes
              •          Username: [email protected] (use your @me.com address from your iCloud account)
              •          Password: Your iCloud password
    Also, you must upgrade your password to meet the new criteria:  8 characters, including upper and lower case and numbers.  If you have an older password that does not meet these criteria, when you try to setup mail on your mac, using all of the IMAP criteria listed above, it will still give a server error message.  Go to   http://appleid.apple.com         then follow directions to change your password, then go back to setting up your mail using the IMAP instructions above.
    Thanks to dpepper...
    https://discussions.apple.com/thread/3867171?tstart=0

  • I have installed Adobe packages and cannot find the Acrobat extension folder please advise how can I get these applications to load onto my computer?

    I have installed Adobe Creative Cloud for teams CC Packages which says that Acrobat XI Pro is installed. Your support page says it does not install Acrobat and I have to look in the Extensions folder for an MSI file.  I have run a number of searches and  cannot find the Acrobat extension folder please advise how can I get these applications to load onto my computer?
    Also I now administer the teams and have accepted the invitation to I received to be a team member and download the apps.  The admin page shows that I have been sent an invitation but does not show my account as "ACtive" unlike my other team members.  I tried to use the link in the invite to accept it become active but the link displayed an error saying I had already accepted the invite... why is no account not active?
    Finally what other product downloads in Creative Cloud do not actually download as part of the Creative cloud Packager for downloading the apps? e.g. acrobat and what else?

    My apologies Eadeszoo I believe our support agents are unavailable on January 1.
    Are you able to copy the contents of the DVD to your computer?  Are you receiving any particular error messages when you are trying to install?  Finally which operating system are you using?

  • I am so angry - there has to be a misundering.  my Itunes was disabled as there was a charge that I did not authorize and I cannot find the phone

    I am so angry - there has to be a misunderstanding.  my Itunes was disabled as there was a charge that I did not authorize and I cannot find the phone number for security and the dingbat girl who I'm emailing send me a link that does not work.  And I am extremely frustrated.   Please help.  I need a phone # to contact security.

    Contact Apple Support here:
    ACCOUNT SECURITY CONTACT NUMBERS
    Cheers,
    GB

Maybe you are looking for

  • Best way to get good resolution when hooking up to a TV?

    I've just recently bought a Macbook Pro 13" from the refurb store, and yesterday acquired a mini DVI to HDMI adapter, in order to hook it up to the TV (32" Samsung full Hd LCD).  It was successful enough, but the on screen view was hideous.  At first

  • Bridge CS4 Won't Download Images

    I just bought a new computer with Wndows 8.1. I've installed Adobe Creative Suite 4 and encountered a problem with Bridge CS4. When I select File > Get Photos From Camera the dialogue box comes up, but it gets stuck on "Loading Device List... Please

  • No Messages in Inbox - Backup

    Odd problem. I got my (2nd - 1st one died) Time Capsule about a month and a half ago. Shoulda checked before I guess but tonight I needed to retrieve a Mail email from earlier today. There were 14 message all from Feb. 27, 2010 and no other inbox mes

  • Images not loading properly

    I'm trying to create a simple slide show using a bit of javascript. It will load the first image correctly, but after that, no images can be found. The images are there, in the right location, but it doesn't want to load them. Any help? http://katege

  • Have to keep resetting hub 3.0

    I have had infinity since the 8th of march the problem is I have to keep unplugging and resetting my home hub 3.0 I get speeds of about 30mb through ethernet connection and about 20mb wireless about 24 hours after I reset the hub my wireless keeps dr