Satellite A65 won't start and I get only blue screen!

When I start my satellite A65 a blue screen comes up saying "a problem has been detected and windows has shut down to prevent damage to your computer"
it says to check if I have adequate disk space or to either disable or update the driver if a driver was mentioned in the stop message... or to check bios updates...
I can type out everything it says if I need to, but that the jist
Does this sound familiar to anybody?
It might be because I didn't update enough when it told me to.
It won't start, not even on safe mode, and it won't let me restore, which I would be perfectly willing to do at this point.
help, please
Jamous

Hi
Usually the Blue screen of death happens due to the serious software problem or due to the hardware malfunction.
In your case it sounds more like something wrong with the hardware. Why, because you are not able to restore the notebook from the delivered Toshiba recovery CD!
What to do buddy? I think the notebook must be checked.
Try to contact an ASP in your country and ask for the further handling!
Good luck

Similar Messages

Pro won't start. Instead get a black screen and a beeping every 2 seconds. LIght at front right corner of keyboard flashes in sequence with beeping.

Pro won't start. Instead get a black screen and a beeping every 2 seconds. Light at front right corner of keyboard flashes in sequence with beeping.

If it is giving a single beep every two seconds, then it is not seeing any of the memory. You could try taking the back off, remove the memory module and reinsert to see if that corrects the problem. Or just take it to an Apple store genius bar and have the techs do that for you.
If you are uncertain about working on the memory modules, you can find on-line videos for doing so at OWC, http://www.macsales.com where you can see the procedure for your year, make and model of MacBook Pro.

Each time I open FCPX my mac book pro freeze and I get a blue screen , I am running FCPX 10.08. I experienced that problem since I downloaded some plugins from Noise Industries . Can somebody help me please ?

Each time I open FCPX my mac book pro freeze and I get a blue screen and my mac book is completely frozen...

Have you removed those plugins ? They could be in your Movie folder or Library - application support - FCP- plugins - effects

I am trying to connect my iPad to my windows pc ( xp) but it does not recognise the iPad and I get a blue screen error causing the pc to shut down. Any ideas

I am still not able to connect my iPad 2 to my Pc ( windows xp). When I try to do so I get a blue screen error and the computer shuts down. I have reinstalled iTunes. iPod works fine. Any ideas?

Not sure, but try these.
Disable your firewall and anitvirus software temporarily.
Restart the iPad by holding down on the Sleep button until the red slider appears and then slide to shut Off. To power up hold the Sleep button until the Apple logo appears and let go of the button.
Reset the iPad by holding down on the Sleep and Home buttons at the same time (for about 10-15 seconds) until the Apple logo appears (ignore the red slider), then let go of the buttons.
 Cheers, Tom

On starting mini I get a blue screen

Bu pressing the start button the mini goes into pause and I can get the normal screen by awaking the computer. However clicking on any icon does not work for several minutes. I would appreciate suggestions on how to approch solving this anomoly. Virginian

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of this exercise is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login. Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. The instructions provided by Apple are as follows:
Be sure your Mac is shut down.
Press the power button.
Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem(s)?
After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

When I open Firefox, even in safe mode, it causes my Windows 7 64-bit to totally crash and I get that blue screen of death =(. This has happened suddenly on Nov 16, 2010. I had been running Firefox on Windows 7 64-bit with no problems previously. Help?

I have had Windows 7 64 bit for the past year and have run Firefox with no problem. It was the most problem free of the three browsers including IE and Chrome.
I have a Vista side where I run my online backup and did so yesterday. Went on Firefox. No Problem.
Today I booted into the Windows 7 side. Seemed to boot up okay. Until I opened Firefox. Suddenly, my whole computer crashed, windows shut down and that bluescreen popped up. I restarted normally. Same thing. I restarted in safe-mode. Couldn't find any problems. Went back to regular mode. Started FF. Boom crash.
Back to safe mode. Did a system restore. Back to regular startup. Didn't help. Attempting to open FF crahed windows.
So back to safe mode. Started Firefox. Crashed the whole computer and same blues screen.
So I uninstalled FF. Reinstalled FF. It still makes Windows crash.
So now I am on IE :P

See below -- the way I asked the question the first time may not be clear. This post was a goof but I can't figure out how to delete it

My phone want reboot and it gets a blue screen

my phonehas blue screen i tryed toreboot want work

Put the iPhone into DFU mode and restore.
Follow this. it has lots of shiny pictures http://www.iclarified.com/entry/index.php?enid=1034

MacBook won't start up just getting a grey screen and wheel spins

My MacBook will not go pass the boot up screen (grey screen with apple logo) the wheel just keeps spinning. What can I do to fix this ?

I assume you do not have Lion or later installed. What do you have - Snow Leopard? If so, then try this instead:
Reinstall OS X without erasing the drive
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install Mac OS X 10.6.8 Update Combo v1.1.

IMac won't start. I get a black screen, not even a grey one or beachball

I Have a 21'' iMac bought in 2012 OS recently upgraded to Mavericks.
A Few days ago I received a system upgrade notice (can't remember the details) which I promptly installed as I always do. Since then the Mac has been switching itself off randomly, with no prompt / command by me. Today it did it three times in quick succession but now it won't switch on again..
When I press the power button at the back I can hear the machine starting to do something (very subtly) but there is no chime, no sign that it's doing anything and the screen remains completely black as if it's switched off.
i Have since turned it off and on several times but get always the same results. I even disconnected from the power supply for a minute or two but same thing happens. Keyboard and mouse also seem to be disconnected.
ANy leads please?

Please make a Genius Appointment and take it in for service.

Try to plug my iPhone into my computer and I get a blue screen

I have been trying to update my ring tones. I did it once and it worked fine. Now when I plug my phone to the computer the thing crashes. Another weird note is when my computer notices that its plugged in it says "new hardware found - still frame camera"??
Does anyone have any advice on what I can do to stop this?
What I did to cause this?

acarstensen, Help has arrived! Let's take a closer look to see what's going on. Does your device have any physical/liquid damage? Did this issue begin after a recent software update or app download? EfrainM_VZW Follow us on Twitter @VZWSupport If my response answered your question please click the "Correct Answer" button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!!

Cs3 won't start and hand on "reading preferences"

Hello
All of a sudden my photoshop won't start and hang on the splash screen " the last message is "reading preferences"
I Run WINXP service pack2.
Photoshop version is 10.0.1
I rebooted did everything (without re-installing)
Is there a way to get out of this ?
Bruno

You could try resetting your preferences as described in the FAQ.
http://www.adobeforums.com/webx/.ef4a07f/1
You either have to physically delete (or rename) the preference files or, if using the Alt, Ctrl, and Shift method, be sure that you get a confirmation dialog.
This resets all settings in Photoshop to factory defaults.
A complete uninstall/re-install will not affect the preferences and a corrupt file there may be causing the problem.

I get a blue screen whenever I unlock it and I have to keep turning it off and on to get the slide to unlock to appear

Have iPod touch and I get a blue screen whenever I unlock it & I have to keep turning it off and on to get the slide to unlock to appear.

Reset the Device:
Hold the power button and the home button down until the device shuts off, then power it back on and see if the problem is resolved.
That won't remove any data. I hope that works.
~Lt. Leviathan

Upon start I get a blue screen with B817977E

HP Photosmart C8180-all in one. I use a Mac Pro laptop. I updated the driver 4 years ago to my Mac. This year while in Fl I went to turn on the printer and I get a blue screen with the number B817988E on the screen. I haver tried re booting by unplugging both ends of the printer cord, but this does not work. Holding the on button in does not work. If it does come on My computer connects wirelessly, but does not print. Then it will not shut down.

lonnlar,
This article should help resolve the error you are getting:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03081973&cc=us&dlc=en&lc=en
Give the steps a try and let us know if it helps.
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Itunes update would not install due to an error, now itunes won't run and I get this message when I try to launch itunes: "This application has failed to start because MSVCR80.dll was not found. Re-installing the application may fix this problem"

itunes update would not install due to an error, now itunes won't run and I get this error message when I try to launch itunes: iTunes.exe - Unable to Locate Component "This application has failed to start because MSVCR80.dll was not found. Re-installing the application may fix this problem."
I'm on a Dell PC running Vista Home Premium.
HELP!!!!!!!!!!!!!!!!!!!

try removing all itunes and all other apple program
follow this link for more info. http://support.apple.com/kb/HT1923
reboot ur window after uninstalling
after that download the latest itunes setup and install.

After an iTunes update failed to install iTunes won't open and I get lthe folloowing error messages. Program can't start because MSVCR80.dll is missing, and iTunes not installed correctly. please reinstall iTunes. Error 7( windows errpr 126)

After an iTunes update failed to install, iTunes won't open and I get the following two windows. Program can't start because MSVCR80.dll is missing from your computer, and iTunes not installed correctly. Please reinstall iTunes. Error 7 (windows error 126) When I reinstall I get the same messages and ITunes won't open.

Click here and follow the instructions.
(98815)

Satellite A65 won't start and I get only blue screen!

Similar Messages

Maybe you are looking for