Satellite A660/07U - Problem installing nVidia driver for Win 7 64bit

A660/07U Windows 7 64bit
To begin with, I need to install this driver as apparently it will solve an issue with the current driver that causes the computer to freeze when booting with an external monitor as the primary display.
I have downloaded the driver install file from the Toshiba web site and it is extracting ok but then when I run the program it just exits immediately without actually installing the drivers.
Device manager in windows doesn't seem to help either, because when I point it to the extracted folders it tells me I already have up-to-date drivers, even though my current driver version is a lower number than the downloaded one.
Rebooting has made no difference.
Any ideas/suggestions?
Thanks in advance

Yes, that is exactly where I got it from and I have tried re-downloading the file but still have had no luck.
I was, however, able to get the driver directly from NVIDIA and it worked fine and has also resolved the issue with the external monitor bootup.
It is still strange that the file provided by Toshiba did not work.

Similar Messages

Satellite P100-429 - cannot install display drivers for Win XP SP3

Hi,
i have Toshiba p100 429 laptop, installed with win xp professional sp3. I'am unable to change screen resolution from 640 by 480.
Actually i tried to download display driver from toshiba site but after installing driver it give blue screen with error message NV4_mini.sys error.
After this i can not even start my laptop.
I am presently using external monitor ( sync master B2230). I have also tried to download drivers from Nvidia website but that does not work either.
Resolution on my screen is still low. thanks for your help

Have you tried to install THIS driver?

Satellite A100-768 - need video card driver for Win 8

Hi everybody,
I cannot find any driver suitable for my Satellite A100-768 where I just installed Win8, my graphic card should be Ati x1400 but nothing work even with Ati and/or toshiba drivers.
Please help me!

Hi
The old Satellite A100-768 isnt Win 8 supported notebook model.
The notebook was equipped with an ATI X1600 (code: M54P 128MB DDR RAM)graphic chip.
I dont think that ATI has developed an Win 8 compatible driver for this old graphic chip.
In my opinion you can use only an standard graphic driver which is part of Win 8 system

Lenovo b570e Problem Installing Nvidia driver

hi people, my device Lenovo b 570e
I can not install driver nvidia 410m, writes "No available device"
all others driver established, in BIOS mode video card set optimus.
what is the reason?

Please do this. Remove the battery and unplug the charger. Press and hold the power button for 30-40 seconds. Insert the battery and try reinstalling the drivers.
Ishaan Ideapad Y560(i3 330m), Hp Elitebook 8460p!(i5-2520M) Hp Pavilion n208tx(i5-4200u)
If you think a post helped you, then you can give Kudos to the post by pressing the Star on the left of the post. If you think a post solved your problem, then mark it as a solution so that others having the same problem can refer to it.

Satellite A100-590 - cannot install Display Driver for Win7

I installed Win7 on my Satellite A100-590 (PSAA9E-03Z00QGR) today. Everything works fine exept for the display drivers.
I downloaded the win7/32bit drivers from here: [here|http://at.computers.toshiba-europe.com/innovation/jsp/SUPPORTSECTION/discontinuedProductPage.do?service=AT&BV_UseBVCook ie=yes&PRODUCT_ID=115970] But when I try to install them, the files extract and then nothing happens.
Anybody else have this problem or even better a solution? will any other drivers work on that laptop?
edit: graphic card is a ATI Mobility Radeon X1600

Extract the files into some new created folder. Open it and use setup.exe.
What happen when you start it manually using setup.exe?
You can also try to start setup in folder Bin.

[solved] Problem installing nvidia driver

i wrote in the terminal
pacman -S nvidia
resolving dependencies...
looking for inter conflicts...
::nividia-utils conflicts with libgl. Remove libgl [Y/n] Y
error:failed to prepare transaction (could not satisfy dependencies)
:: savage-dri :requires libgl=7.6
Then i put pacman -S libgl=7.6
that goes without a hitch.
then i repeated pacman -S nvidia and i get the same messsag
Last edited by Romanrp (2009-11-20 20:27:51)

kazuo wrote:
fsckd wrote:
kazuo wrote:nvidia dont need libgl.
Yes it does, very indirectly, but yes it does.
Are you sure?
sudo pacman -S libgl
Password:
resolving dependencies...
looking for inter-conflicts...
:: libgl conflicts with nvidia-utils. Remove nvidia-utils? [Y/n]
Truly, my world has been shattered.

Bluescreen! Updating Lenovo's nVidia driver for Win7 64bit on my w520

No other messages were found that addressed this:
Audio out disappeared for no obvious reason playing web content on a TV through the DisplayPort (DP->HDMI adapter) on discrete graphics settings (in BIOS.) Most important, clicking the nVidia icon in Control Panel didn't bring up any dialog or control box/tool. So I went to the Lenovo driver updates for my machine and there is offered a very recent package of drivers for all the machine's graphics: nVidia and integrated. I downloaded that and ran it. On the restart the w520 bluescreened and a repair routine started that took a while to get the w520 booted. Looking at the "System" log there are a series of kernel power Warnings.
The event text says:
"The speed of processor 2 in group 0 is being limited by system firmware. The processor has been in this reduced performance state for 71 seconds since the last report." This doesn't *seem* to be related to graphics...
When the machine was up and running I went to the Control Panel and the nVidia software didn't start from the icon there, so probably no change. Same as before trying to install the new drivers. I had made a Restore Point just before trying the driver upgrade.
The driver package was dated August 2012, I believe. Anyone successfully loaded this set of drivers?
jonathan7007
4276-37U -- W520. Still have an X61t. First laptop in my house was an Osborne! Now that was a cool computer. (...for its time!)

Not getting completely solved. I installed the Lenovo driver with a driver file freshly downloaded. Process seemed to touch all bases... screen went to low resolution in the middle of the process. After two restarts needed to return the display to full resolution I see only one "nVidia 1000 Quadro" device under video adapters in Device Manager. I thought the integrated Lenovo device was going to be there, too. Further problem: there is no nVidia item in Control Panel.
My goal is to be able to have beter control over when the nVidia board is running, as I use Lightroom, Photoshop, etc. sometimes. I shoot tethered professionally. So I want to *know* when I have the boost from the nVidia hardware.
Will someone please confirm that I should be seeing the integrated graphics solution in Device Manager? ...and the nVidia control panel in current driver?
Thanks!
jonathan7007
4276-37U -- W520. Still have an X61t. First laptop in my house was an Osborne! Now that was a cool computer. (...for its time!)

Satellite A200-1UP - Need SD card driver for Win 7

hi guys,
I need SD card utility working on WINDOWS 7 which i don't fine anywhere.
I had Vista b4 and worked perfectly on it.
Now with Windows 7 i keep searching for the driver and cant find it.
*any ideas,*
*thanks*

Of course its listed.
You should not search in Archive but should choose Notebook in Product Type.
and its not matter what A300 you will choose check simply any A300 Flash Media driver!

Can not install WXP driver for WLAN card on my Satellite A200-14D

i have a problem with wireless driver for win xp
i installed win xp and the only problem is the wireless lan driver
help me please

What you mean it does not work? Can you install WLAN card or not? Is your problem WLAN card installation or you can not establish WLAN connectivity?
Please write a little bit more. Is so bad to write few sentences more and describe what happen exactly. Is there any error message or what?

Satellite A660-07U - Can't install new display driver

When I first got my laptop it wouldn't even boot out the box! So I googled the way to get it up and running and it wouldn't install Windows 7 32bit, so I installed Windows 7 64bit and that worked.
I am one of the users who is also having their laptop freeze on them constantly. I have done the Bios update and it is still doing it. So I decided to try updating the graphics drivers with the new ones from this website, but it seems they wont install. I got the Windows 7 64bit drivers first as I have Windows 7 64bit installed in my laptop. But it says it cant find the required hardware, I figured its because my laptop is not a 3D version, should that even matter?
So I then tried the 32bit drivers and it says im using wrong system os for those drivers.
So how about some drivers I can use?

Hello
> it didn't work out the box
Why it didnt work? What problems you had exactly?
> The X64 drivers for download will NOT work on my A660, says something about not the right hardware (which is where I got the 3D idea from)
Well, in my opinion it has nothing to do with 3D support. If you can find new driver updates for Satellite A660 they should work because they are tested by Toshiba.
As far as I know there is no A660 model with 3D support, thats only available on A665.
Fact is that 32bit drivers never work on 64bit operating systems. So just forget this point.
Satellite A660/07U seems to be an Australian model and belongs to PSAW3A series. On the Australian page there is only one display driver available for Windows 7 64bit
What you can try is the display driver from European page where you can find a similar model PSAW3E:
http://eu.computers.toshiba-europe.com
On this page I could found two driver version: 260.51 and 189.58. As far as I know latter one works properly without freeze.
> You could have just said you don't know the answer or are you always this condescending?
You want some help or not? ;)
I mean I also didnt know that you are still use the Windows 7 installation from Toshiba, you only wrote about new Windows 7 installation.
Anyway, it was simple misunderstanding.

Latest Nvidia Driver for G560 does not install!

Hi,
i've tried to install the latest nvidia driver for my G560. But it seems like the only driver working on this system is the preinstalled driver from Lenovo.
I always get the message that the driver can't find the required hardware. I've downloaded the correct (Win 7 64 Bit) and latest driver from Nvidias webpage. I've even tried some older drivers from the drivers archive.
Does anybody have a clue how I can solve my problem?
Greetings Cpk83
Solved!
Go to Solution.

It does look like the correct driver. But I noticed this "Note: The following notebooks are not supported in this release: 1. Notebooks supporting Hybrid Power with Intel chipsets. 2. Fujitsu notebooks – support will be added in a later release. Fujitsu Siemens (FSC) notebooks are supported in this release. 3. Sony VAIO notebooks – support will be added in a later release. Sony VAIO Windows 7 users can click here for driver update support. 4. Any notebook that is launched after the release date of this driver. " Does anyone know if this laptop has Hybrid Power? Also here is a good tip/recommended from ATI. "Advisory: The display driver supplied by the laptop manufacturer is customized for the built-in flat panel display, and the graphics features and functions specific to the laptop. It is strongly recommended to use the supplied drivers. If installing a different operating system other than the one included with the laptop, the laptop may not meet all the requirements, and supported drivers may not be available. The laptop manufacturer is the exclusive provider of driver updates. If the required driver update is not available at the laptop manufacturers’ website, it is recommended to contact the manufacturer directly, to see if an updated driver will be made available in the future."
IT Specialist and Consultant
Lenovo Tablet Evangelist
Current Machines: IdeaCentre A300, ThinkPad Tablet, IdeaPad U410, and Yoga 3 Pro Touch
Deutsche Community Comunidad en Español
Lenovo - the latest in DOtabs, DOpads, DOcentre's, DOstations and DOservers!

Satellite A660-07U freezes when Streaming video

I bought a Toshiba satellite A660 07U 2 months ago.
From the beginning, when I try to watch any streaming video from Facebook,Youtube etc, my system totally hangs and keeps on making zzzzz....noise and I have to manually shutdown the notebook by pressing the power button.
This is happening very often now. I contacted toshiba support and the response was to change my microphone boost settings in Volume configure..:smileysurprised:.
Does anyone have any tips for solving this problem?

Hi,
Today this also happened while I was watching a movie on DVD.
The graphics card is NVIDIA and I have updated the driver for it.
Once it freezes I can't check the background processes as the whole system ceases to respond.
I don't think its a problem with the player as streaming video is sometimes played with WM, sometimes with Real player.
Toshiba claims this laptop is a special edition as a media entertainment tool with blue ray dvd player.
I am a software engineer and i do run heavy softwares like Visual studio and sql server database on this pc but never had any problem, but only have this freezing problem while playing video.

Need to compile nvidia driver for a custom kernel [SOLVED]

I compiled a custom kernel following this wiki page: http://wiki.archlinux.org/index.php/Ker … rom_Source
I can boot into it just fine. I now want to compile an nvidia driver for use with it and followed the steps on this wiki page: http://wiki.archlinux.org/index.php/NVI … tom_kernel
I run into a problem when makepkg trys to compile it. Here is the output:
$ cd ~/devel/abs/nvidia/
$ makepkg -c
==> Making package: nvidia-my 190.42-1 x86_64 (Thu Nov 5 17:42:29 EST 2009)
==> Checking Runtime Dependencies...
==> Checking Buildtime Dependencies...
==> Retrieving Sources...
-> Found NVIDIA-Linux-x86_64-190.42-pkg0.run in build dir
==> Validating source files with md5sums...
NVIDIA-Linux-x86_64-190.42-pkg0.run ... Passed
==> Extracting Sources...
==> Entering fakeroot environment...
==> Starting build()...
Creating directory NVIDIA-Linux-x86_64-190.42-pkg0
Verifying archive integrity... OK
Uncompressing NVIDIA Accelerated Graphics Driver for Linux-x86_64 190.42..................................................................................................................................................
If you are using a Linux 2.4 kernel, please make sure
you either have configured kernel sources matching your
kernel or the correct set of kernel headers installed
on your system.
If you are using a Linux 2.6 kernel, please make sure
you have configured kernel sources matching your kernel
installed on your system. If you specified a separate
output directory using either the "KBUILD_OUTPUT" or
the "O" KBUILD parameter, make sure to specify this
directory with the SYSOUT environment variable or with
the equivalent nvidia-installer command line option.
Depending on where and how the kernel sources (or the
kernel headers) were installed, you may need to specify
their location with the SYSSRC environment variable or
the equivalent nvidia-installer command line option.
*** Unable to determine the target kernel version. ***
make: *** [select_makefile] Error 1
==> ERROR: Build Failed.
Aborting...
The step it's choking on is (from the PKGBUILD), "make SYSSRC=/lib/modules/${_kernver}/build module || return 1"
What am I doing wrong?
My PKGBUILD:
pkgname=nvidia-my
pkgver=190.42
_kernver='2.6.32-rc6-MINE'
pkgrel=1
pkgdesc="NVIDIA drivers for kernel26."
arch=('i686' 'x86_64')
[ "$CARCH" = "i686" ] && ARCH=x86
[ "$CARCH" = "x86_64" ] && ARCH=x86_64
url="http://www.nvidia.com/"
depends=('kernel26>=2.6.31' 'kernel26<2.6.32' "nvidia-utils=${pkgver}")
conflicts=('nvidia-96xx' 'nvidia-173xx')
license=('custom')
install=nvidia.install
source=("http://download.nvidia.com/XFree86/Linux-$ARCH/${pkgver}/NVIDIA-Linux-$ARCH-${pkgver}-pkg0.run")
md5sums=('f94806feee87de756d14fe3e9bcaf05a')
[ "$CARCH" = "x86_64" ] && md5sums=('ae431ff849ec01446e6724f9fcfe3bb4')
build() {
cd $srcdir
sh NVIDIA-Linux-$ARCH-${pkgver}-pkg0.run --extract-only
cd NVIDIA-Linux-$ARCH-${pkgver}-pkg0
cd usr/src/nv/
ln -s Makefile.kbuild Makefile
make SYSSRC=/lib/modules/${_kernver}/build module || return 1
mkdir -p $pkgdir/lib/modules/${_kernver}/kernel/drivers/video/
install -m644 nvidia.ko $pkgdir/lib/modules/${_kernver}/kernel/drivers/video/
sed -i -e "s/KERNEL_VERSION='.*'/KERNEL_VERSION='${_kernver}'/" $startdir/nvidia.install
My nvidia.install
post_install() {
KERNEL_VERSION='2.6.32-rc6-MINE'
depmod $KERNEL_VERSION
post_upgrade() {
post_install
rmmod nvidia || echo 'In order to use the new nvidia module, exit Xserver and unload it manually.'
post_remove() {
KERNEL_VERSION='2.6.32-rc6-MINE'
depmod $KERNEL_VERSION
Last edited by graysky (2009-11-07 10:54:33)

Hello,
I'm kind of a noob and am trying to get follow the directions from the Nvidia wiki on installing on a custom kernel. I'm trying to use the abs method to install on kernel26rt version 2.6.33rt. I followed directions exactly and am getting an error that I didn't find on any other posts. Can you please take a look? Here is my terminal:
[jsadural@jlinux nvidia]$ makepkg -ci
==> Making package: nvidia-2633rt 270.30-3 (Wed Mar 30 08:53:08 PDT 2011)
==> Checking runtime dependencies...
==> Checking buildtime dependencies...
==> Retrieving Sources...
-> Downloading NVIDIA-Linux-x86_64-270.30-no-compat32.run...
--2011-03-30 08:53:08-- ftp://download.nvidia.com/XFree86/Linux … mpat32.run
=> “NVIDIA-Linux-x86_64-270.30-no-compat32.run.part”
Resolving download.nvidia.com... 69.31.121.43
Connecting to download.nvidia.com|69.31.121.43|:21... connected.
Logging in as anonymous ... Logged in!
==> SYST ... done. ==> PWD ... done.
==> TYPE I ... done. ==> CWD (1) /XFree86/Linux-x86_64/270.30 ... done.
==> SIZE NVIDIA-Linux-x86_64-270.30-no-compat32.run ... 30037601
==> PASV ... done. ==> RETR NVIDIA-Linux-x86_64-270.30-no-compat32.run ... done.
Length: 30037601 (29M) (unauthoritative)
100%[======================================>] 30,037,601 696K/s in 42s
2011-03-30 08:53:50 (696 KB/s) - “NVIDIA-Linux-x86_64-270.30-no-compat32.run.part” saved [30037601]
==> Validating source files with md5sums...
NVIDIA-Linux-x86_64-270.30-no-compat32.run ... Passed
==> Extracting Sources...
==> Starting build()...
Creating directory NVIDIA-Linux-x86_64-270.30-no-compat32
Verifying archive integrity... OK
Uncompressing NVIDIA Accelerated Graphics Driver for Linux-x86_64 270.30........................................................................................................................
NVIDIA: calling KBUILD...
test -e include/generated/autoconf.h -a -e include/config/auto.conf || ( \
echo; \
echo " ERROR: Kernel configuration is invalid."; \
echo " include/generated/autoconf.h or include/config/auto.conf are missing.";\
echo " Run 'make oldconfig && make prepare' on kernel src to fix it."; \
echo; \
/bin/false)
mkdir -p /home/jsadural/devel/abs/nvidia/src/NVIDIA-Linux-x86_64-270.30-no-compat32/kernel/.tmp_versions ; rm -f /home/jsadural/devel/abs/nvidia/src/NVIDIA-Linux-x86_64-270.30-no-compat32/kernel/.tmp_versions/*
make -f scripts/Makefile.build obj=/home/jsadural/devel/abs/nvidia/src/NVIDIA-Linux-x86_64-270.30-no-compat32/kernel
cc -Wp,-MD,/home/jsadural/devel/abs/nvidia/src/NVIDIA-Linux-x86_64-270.30-no-compat32/kernel/.nv.o.d -nostdinc -isystem /usr/lib/gcc/x86_64-unknown-linux-gnu/4.5.2/include -I/usr/src/linux-2.6.33-rt/arch/x86/include -Iinclude -include include/generated/autoconf.h -D__KERNEL__ -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs -fno-strict-aliasing -fno-common -Werror-implicit-function-declaration -Wno-format-security -fno-delete-null-pointer-checks -O2 -m64 -mtune=generic -mno-red-zone -mcmodel=kernel -funit-at-a-time -maccumulate-outgoing-args -fstack-protector -DCONFIG_AS_CFI=1 -DCONFIG_AS_CFI_SIGNAL_FRAME=1 -pipe -Wno-sign-compare -fno-asynchronous-unwind-tables -mno-sse -mno-mmx -mno-sse2 -mno-3dnow -Wframe-larger-than=2048 -fomit-frame-pointer -Wdeclaration-after-statement -Wno-pointer-sign -fno-strict-overflow -fno-dwarf2-cfi-asm -fconserve-stack -I/home/jsadural/devel/abs/nvidia/src/NVIDIA-Linux-x86_64-270.30-no-compat32/kernel -Wall -MD -Wsign-compare -Wno-cast-qual -Wno-error -D__KERNEL__ -DMODULE -DNVRM -DNV_VERSION_STRING=\"270.30\" -Wno-unused-function -mcmodel=kernel -mno-red-zone -UDEBUG -U_DEBUG -DNDEBUG -DMODULE -D"KBUILD_STR(s)=#s" -D"KBUILD_BASENAME=KBUILD_STR(nv)" -D"KBUILD_MODNAME=KBUILD_STR(nvidia)" -c -o /home/jsadural/devel/abs/nvidia/src/NVIDIA-Linux-x86_64-270.30-no-compat32/kernel/nv.o /home/jsadural/devel/abs/nvidia/src/NVIDIA-Linux-x86_64-270.30-no-compat32/kernel/nv.c
In file included from /usr/src/linux-2.6.33-rt/arch/x86/include/asm/uaccess.h:573:0,
from include/linux/poll.h:13,
from /home/jsadural/devel/abs/nvidia/src/NVIDIA-Linux-x86_64-270.30-no-compat32/kernel/nv-linux.h:84,
from /home/jsadural/devel/abs/nvidia/src/NVIDIA-Linux-x86_64-270.30-no-compat32/kernel/nv.c:13:
/usr/src/linux-2.6.33-rt/arch/x86/include/asm/uaccess_64.h: In function ‘copy_from_user’:
/usr/src/linux-2.6.33-rt/arch/x86/include/asm/uaccess_64.h:35:6: warning: comparison between signed and unsigned integer expressions
In file included from /home/jsadural/devel/abs/nvidia/src/NVIDIA-Linux-x86_64-270.30-no-compat32/kernel/nv.c:13:0:
/home/jsadural/devel/abs/nvidia/src/NVIDIA-Linux-x86_64-270.30-no-compat32/kernel/nv-linux.h: At top level:
/home/jsadural/devel/abs/nvidia/src/NVIDIA-Linux-x86_64-270.30-no-compat32/kernel/nv-linux.h:251:35: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘nv_spinlock_t’
/home/jsadural/devel/abs/nvidia/src/NVIDIA-Linux-x86_64-270.30-no-compat32/kernel/nv-linux.h:1436:5: error: expected specifier-qualifier-list before ‘nv_spinlock_t’
/home/jsadural/devel/abs/nvidia/src/NVIDIA-Linux-x86_64-270.30-no-compat32/kernel/nv.c: In function ‘nv_alloc_file_private’:
/home/jsadural/devel/abs/nvidia/src/NVIDIA-Linux-x86_64-270.30-no-compat32/kernel/nv.c:1993:5: error: implicit declaration of function ‘semaphore_init’
/home/jsadural/devel/abs/nvidia/src/NVIDIA-Linux-x86_64-270.30-no-compat32/kernel/nv.c:1994:5: error: ‘nv_file_private_t’ has no member named ‘waitqueue’
/home/jsadural/devel/abs/nvidia/src/NVIDIA-Linux-x86_64-270.30-no-compat32/kernel/nv.c:1995:5: error: implicit declaration of function ‘atomic_spin_lock_init’
/home/jsadural/devel/abs/nvidia/src/NVIDIA-Linux-x86_64-270.30-no-compat32/kernel/nv.c:1995:5: error: ‘nv_file_private_t’ has no member named ‘fp_lock’
/home/jsadural/devel/abs/nvidia/src/NVIDIA-Linux-x86_64-270.30-no-compat32/kernel/nv.c: In function ‘nv_kern_poll’:
/home/jsadural/devel/abs/nvidia/src/NVIDIA-Linux-x86_64-270.30-no-compat32/kernel/nv.c:2790:30: error: ‘nv_file_private_t’ has no member named ‘waitqueue’
/home/jsadural/devel/abs/nvidia/src/NVIDIA-Linux-x86_64-270.30-no-compat32/kernel/nv.c:2793:5: error: implicit declaration of function ‘atomic_spin_lock_irqsave’
/home/jsadural/devel/abs/nvidia/src/NVIDIA-Linux-x86_64-270.30-no-compat32/kernel/nv.c:2793:5: error: ‘nv_file_private_t’ has no member named ‘fp_lock’
/home/jsadural/devel/abs/nvidia/src/NVIDIA-Linux-x86_64-270.30-no-compat32/kernel/nv.c:2804:5: error: implicit declaration of function ‘atomic_spin_unlock_irqrestore’
/home/jsadural/devel/abs/nvidia/src/NVIDIA-Linux-x86_64-270.30-no-compat32/kernel/nv.c:2804:5: error: ‘nv_file_private_t’ has no member named ‘fp_lock’
/home/jsadural/devel/abs/nvidia/src/NVIDIA-Linux-x86_64-270.30-no-compat32/kernel/nv.c: In function ‘nv_kern_close_registry’:
/home/jsadural/devel/abs/nvidia/src/NVIDIA-Linux-x86_64-270.30-no-compat32/kernel/nv.c:3595:18: error: ‘nv_file_private_t’ has no member named ‘off’
/home/jsadural/devel/abs/nvidia/src/NVIDIA-Linux-x86_64-270.30-no-compat32/kernel/nv.c:3611:22: error: ‘nv_file_private_t’ has no member named ‘off’
/home/jsadural/devel/abs/nvidia/src/NVIDIA-Linux-x86_64-270.30-no-compat32/kernel/nv.c: In function ‘nv_kern_write_registry’:
/home/jsadural/devel/abs/nvidia/src/NVIDIA-Linux-x86_64-270.30-no-compat32/kernel/nv.c:3703:51: error: ‘nv_file_private_t’ has no member named ‘off’
/home/jsadural/devel/abs/nvidia/src/NVIDIA-Linux-x86_64-270.30-no-compat32/kernel/nv.c:3710:45: error: ‘nv_file_private_t’ has no member named ‘off’
/home/jsadural/devel/abs/nvidia/src/NVIDIA-Linux-x86_64-270.30-no-compat32/kernel/nv.c:3720:9: error: ‘nv_file_private_t’ has no member named ‘off’
/home/jsadural/devel/abs/nvidia/src/NVIDIA-Linux-x86_64-270.30-no-compat32/kernel/nv.c: In function ‘nv_post_event’:
/home/jsadural/devel/abs/nvidia/src/NVIDIA-Linux-x86_64-270.30-no-compat32/kernel/nv.c:4330:5: error: ‘nv_file_private_t’ has no member named ‘fp_lock’
/home/jsadural/devel/abs/nvidia/src/NVIDIA-Linux-x86_64-270.30-no-compat32/kernel/nv.c:4347:5: error: ‘nv_file_private_t’ has no member named ‘waitqueue’
/home/jsadural/devel/abs/nvidia/src/NVIDIA-Linux-x86_64-270.30-no-compat32/kernel/nv.c:4348:5: error: ‘nv_file_private_t’ has no member named ‘fp_lock’
/home/jsadural/devel/abs/nvidia/src/NVIDIA-Linux-x86_64-270.30-no-compat32/kernel/nv.c: In function ‘nv_get_event’:
/home/jsadural/devel/abs/nvidia/src/NVIDIA-Linux-x86_64-270.30-no-compat32/kernel/nv.c:4362:5: error: ‘nv_file_private_t’ has no member named ‘fp_lock’
/home/jsadural/devel/abs/nvidia/src/NVIDIA-Linux-x86_64-270.30-no-compat32/kernel/nv.c:4365:9: error: ‘nv_file_private_t’ has no member named ‘fp_lock’
/home/jsadural/devel/abs/nvidia/src/NVIDIA-Linux-x86_64-270.30-no-compat32/kernel/nv.c:4390:5: error: ‘nv_file_private_t’ has no member named ‘fp_lock’
make[3]: *** [/home/jsadural/devel/abs/nvidia/src/NVIDIA-Linux-x86_64-270.30-no-compat32/kernel/nv.o] Error 1
make[2]: *** [_module_/home/jsadural/devel/abs/nvidia/src/NVIDIA-Linux-x86_64-270.30-no-compat32/kernel] Error 2
NVIDIA: left KBUILD.
nvidia.ko failed to build!
make[1]: *** [module] Error 1
make: *** [module] Error 2
==> ERROR: A failure occurred in build().
Aborting...
thanks,
jason

After installing Nvidia Driver, console broken... help

i am a newbie in arch linux, before i install nvidia driver, i can login to gnome and exit it with no problem, but after i use nvidia as the driver, whenever i change to console, or other tty, the screen look like broken, is there any solution for it.???

http://bbs.archlinux.org/viewtopic.php?id=30617
or try to use another version of driver

Satellite C850-108 - WLan card driver for Win 7

I have a Toshiba Satellite C850-108 and recently it just completely crashed.
Being stupid i never got chance to create a recovery disc etc for it.
I have a friend that sent me a disc to help reinstall windows 7.
However when i did this i lost all drivers and had to completely reinstall them as Iv been finding out which ones i need.
One big problem i have had is that when i install the driver for network controller it just refuses to install saying there is no network driver detected.
I have tried going to devices and yellow exclamation etc but still doesnt find anything.
I have download numerous drivers from Toshiba to try correct this but still have the same problem. I can only connect to the internet via an Ethernet.
It is as if I do not even have a Wirless card.
Im very puzzled and frustrated with this if anyone can help i would very much appreciate this.
P.s i installed using 32bit but when i check my serial number it states that it is 64 bit. Could this be part if the cause?.

Hi
As Im not mistaken the Satellite C850-108 supports the Realtek RTL8188CE WLan card.
So you need to install the Realtek WLan driver for the RTL8188CE chip.
You should be able to download the driver directly from Realtek page:
[Realtek Drivers & Utilities|http://www.realtek.com/downloads/downloadsView.aspx?Langid=1&PNid=21&PFid=48&Level= 5&Conn=4&DownTypeID=3&GetDown=false]

Satellite A660/07U - Problem installing nVidia driver for Win 7 64bit

Similar Messages

Maybe you are looking for