Satellite A660-13Q - Error when opening recovery media creator

My problem is that: When I try to open the TOSHIBA Recovery Media Creator application gives me the next error: "CAN NOT get information from the disk controller" with the options Accept or Cancel, when Accept then gives the next error --> "there has been an unexpected error. out of this application and restart it. Error code: 0d00f6-49-00000001" then accept next error "there has been an unexpected error. out of this application and restart it. Error code: 0D0172-49-00000001" Then accept, the application open correctly.
Please, I need a solucion of the errors, Thanks.

Hey,
I dont know what to say but fact is you cant start Toshiba recovery disk creator there is not much what you can do because you cant download this program on official Toshiba website.
In your case I would try to recover your notebook to factory settings using HDD recovery option:
http://aps2.toshiba-tro.de/kb0/HTD1303440001R02.htm
After this create the recovery disk again before you install any new software or something else.
I could also imagine that you installed another program that blocks recovery disk creator but its hard to say about this so try HDD recovery and see what happens.

Similar Messages

  • Satellite L505-10K - Unexpected error when using recovery disk creator

    Toshiba Satellite L505-10k
    Can't make any recovery disc when I open toshiba recovery media creator, it says: an unexpected error occurred. Close the program and then restart it (error code: 0D00F6-49-00000015) and then I click ok and then it comes again and then I click ok and it comes again and I click ok and then the program comes and when I create the disc it comes to the verification, but then it says: Unable to read the following file. E: \ Boot \ fonts \ chs_boot.ttf (error code: 02015-20-00000000).
    I really do need help, I'm afraid something will happen to my computer, so is there anyone who knows something about this kind of problem?
    Thankful for your help.

    Hi
    I don't now if that works be cause when I got my computer I tried to create an recovery disc but it says yeah, you know, and I was looking in the folder if the file was there as it says that it could not read but the file isn't there so I don't think that it works to do an recovery from the HDD but I know that I can order an recovery disc from toshiba but I don't know if it works to do an recovery with it du you think so? but if I order an recovery disc do you think that I can get it for my language? I'm from sweden.

  • Satellite C50-A-19T problem with TOSHIBA Recovery Media Creator

    When i try to make Recovery dvd with TOSHIBA Recovery Media Creator the burning fails.
    I have Satellite C50-A-19T with TSSTcorpCDDVDW_SU-208DB_T cd/dvd-rw unit.
    During burning process i get an error that say that is impossible read the file D:\ZZImages\ZZImages\install29.swm (the .swm file in error change with different attempts).
    I marked the option to verify dvd after burning.
    I tried a few times: i try make a single dvd (requires 3 dvd for complete recovery).
    i try 2 times with verbatim dvd+r the fist try failed, the second succeeded with the same kind of support.
    i try make dvd numb. 2. for two time with dvd-r and dvd +r support and it failed again.
    On windows error report i find this error:
    and this alert:
    +ODD Firmware Update to fix problems with the Toshiba Recovery CD creator+
    I see this solution by upgrading firmware for different models of cd/dvd-rw units
    http://aps2.toshiba-tro.de/kb0/TSB9C02RP0000R01.htm
    but not about the model I have.
    i have:
    TOSHIBA Recovery Media Creator version: 3.1.02.55065006
    windows 8.1 x64.
    there is a solution?
    is a known problem?
    thanks
    Elena

    > I don't have a free usb drive to test the usb mode.
    I would recommend you to purchase an separate USB memory stick and to create the such recovery USB flash memory media.
    Please check also this different procedure described in this Toshiba HowTO
    [How to create a USB recovery media flash drive from recovery ISO images- or discs (DVDs)|http://aps2.toshiba-tro.de/kb0/HTD4103KB0000R01.htm]
    Feedback is greatly appreaciated

  • Portg Z30-A-182 - Recovery Media Creator Error

    Hi,
    I have a brand new Portg Z30-A-182, have installed my office and virusscan and now want to create a set of Recovery DVD's using Recovery Media Creator.
    I use a Samsun external DVD-writer and DVD+RW disc's.
    I keep getting the error 0E01BA-49-00000000 when the software wants to start writing to the DVD.
    I searched the internet and this seems an error which occurs frequently and does not get solved using other type of discs.
    How do I solve this error ?
    I saw that I can BUY a set of recovery discs with Toshiba online, but that can not be the purpose with a brand new pc ???

    Can you plese test functionality when you try to create recovery USB stick?
    I have machine without ODD too and I have created recovery USB. It is for me more komfortable than using DVDs.
    By the way: in the past i have created recovery DVDs using DVD-R medias only.
    Check also this thread.

  • Toshiba Recovery Media Creator Error Code 020150-20-00000000 (Satallite L755-S5308)

    We just received 2 - Toshiba Satallite L755-S5308 Laptops over the thanksgiving holiday from Best Buy and the first thing we normally do after powering up the laptops is to create our recovery disc sets to DVD's. However, both laptops are giving the same error message on both machines at the same point in the creation of the Recovery DVD Disc 4 when using the Toshiba Recovery Media Creator. Please See Eror Message Below:
    Failed To Read The Following File.
    D:\ZZImages\ZZImages\Preinst18.swm
    (Error Code: 020150-20-00000000)
    If you are getting this error message then you will not be able to restore your laptop factory software and operating system (Windows 7 Home Premium 64-bit)

    You could create an image of the entire HDD onto another drive, but this can be a headache for a lot of users and would require specialized hardware and a HDD enclosure. As such, it's not a feasible solution.
       Oh,come now.  You can buy 'specialized hardware' -- an HDD enclosure -- from a widely known online computer store for $12.99 with free shipping, and a spare plain old Seagate 500 GB hard drive (nothing very special about it, except that it costs more since the flooding in Thailand) running at 7200 rpm from a different widely known online computer store for $99.99 (shipping extra).  Seagate gives away its branded version of Acronis True image for free.  It is not that hard to use.   I believe the L755 has a 500 GB 5400 rpm hard disc drive, so this Seagate may make the laptop run faster under some conditions.   Creating an image of the laptop HDD onto this 2nd HDD mounted in the enclosure may take hours, but consider the only other alternative, below:
         Anyone who thinks that solution is not feasible can just wait until their one and only hard disc drive fails or develops a software problem.    Without usable recovery discs, the machine must be dropped off or mailed to a service center.  Compare the waiting and the expense to have someone else solve that kind of problem with the effort and expense of preventing it.   If you don't mind being without your computer for a few days or weeks, go for the simple way.
         By the way, even the best home-burned optical discs are prone to develop unexpected failures after they are created.  I've never had a factory pressed optical disc properly stored develop a late failure.  If these work out of the box, they work a couple of years later.   The technologies behind a home-burned disc and a factory-pressed disc are different.
        Getting back to my original point, should your 1st HDD fail, and should you have a 2nd HDD with the cloned image of the 1st HDD, your recovery takes as long as it takes to remove HDD #1, installed HDD #2, and reboot your laptop, involving about 5 minutes of your time and perhaps a small screwdriver.  You can test whether or not your cloned backup works the same way, by installing HDD #2 and seeing if it works.   If you only have a single HDD, there is no good way to test your recovery media, since they overwrite your original HDD.

  • Recovery Media Creator Installation error

    I have a P745-S4320 that somehow does not have the Recovery Media Creator Installed. I have downloaded it from the Toshiba website and when I try to run the installation, it pops an error message saying:
    Feature: StartMenuShortcuts
    Cmoponent: StartMenuShortcuts
    Error: The file or directory is corrupted and unreadable
    Then it stops the installation and erases all the information and files & folders created during the installation.
    Can somebosy please help me on this?
    I need to create the Recovery Discs because the DVD-R DLones I created when I first bought the laptop can't be usable for an error on the files 12 & 18 on Disc 2.
    Please somebody help
    Attachments:
    trash.JPG ‏39 KB

    Satellite P745-S4320
    Downloads here
    I have downloaded it from the Toshiba website..
    I don't see it among the downloads at the link above. So I doubt you've got the right program.
    See if you can locate the following file in either the Program Files or the Program Files (X86) folder. It should be the program you're looking for.
       TRMCLcher.exe
    Let us know what you learn.
    Otherwise, you can order recovery media from Toshiba. Scroll down to Get Recovery Media here.
    -Jerry

  • Error When Opening Any Form

    Hi All.,
    Im facing some issue while opening any form..its stuck in below mention file while opening any form i tried all the ways still im not able to fix the issue.
    Application:11.5.10.2
    OS-----------HP-UX
    DB-----------10.2.0.4.0
    File Name:
    oracle/forms/ui/FLWTextArea
    Work Around
    Relink the all the files
    Regenerated the jar files
    Regenerated the forms
    f60gen help=y
    Forms 6.0 (Form Compiler) Version 6.0.8.28.0 (Production)
    Forms 6.0 (Form Compiler): Release - Production
    (c) Copyright 1999 Oracle Corporation. All rights reserved.
    PL/SQL Version 8.0.6.3.0 (Production)
    Oracle Procedure Builder V6.0.8.21.0 Build #0 - Production
    Oracle Virtual Graphics System Version 6.0.5.39.0 (Production)
    Oracle Multimedia Version 6.0.8.25.0 (Production)
    Oracle Tools Integration Version 6.0.8.17.0 (Production)
    Oracle Tools Common Area Version 6.0.5.32.0
    Oracle CORE Version 4.0.6.0.0 - Production
    Metalink Doc id
    java.lang.NoClassDefFoundError: oracle/forms/ui/FLWTextArea Error When Opening Any Form [ID 1219663.1]

    Thanks,
    From the below doc id we are currently in patch set 19 but im not able see that in ad_bugs.,
    Note: 232313.1 - Information on Previous Versions of Developer 6i Patchsets
    https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=232313.1
    Here is an example:
    If you have Forms: 6.0.8.27.x --> You are on Developer 6i Patch 18
    If you have Forms: 6.0.8.26.x --> You are on Developer 6i Patch 17
    If you have Forms: 6.0.8.25.x --> You are on Developer 6i Patch 16
    If you have Forms: 6.0.8.24.x --> You are on Developer 6i Patch 15
    SQL> select bug_number from ad_bugs where bug_number='&BUG_NUMBER';
    Enter value for bug_number: 9935935
    old 1: select bug_number from ad_bugs where bug_number='&BUG_NUMBER'
    new 1: select bug_number from ad_bugs where bug_number='9935935'
    no rows selected
    SQL>

  • Getting 500 Internal Server Error when opening GC page

    There was no change in configuration and all of a sudden, I can not connect to GC. I did notice that OC4J for OC4J_EM is down and I can't get it to go "Alive". Can someone run opmnctl status and print the output for me?
    I'm on Windows 2003/GC 10.1.0.4. Anyone has seen this problem?
    Cheers,
    Rodney

    Exact error when opening page is:
    Internal Server Error
    The server encountered an internal error or misconfiguration and was unable to complete your request.
    Please contact the server administrator, [email protected] and inform them of the time the error occurred and anything you might have done that may have caused the error. More information about this error may be available in the server error log.

  • Error when opening an RFC connection (CPIC-CALL: 'ThSAPOCMINIT' : cmRc=2 thRc=679

    Hi,
    We update the BW landscape for version 7.4 suppport package 4 (whitout HANA).
    We use a external system connection to extract data from a SQLServer database (Microsoft Connector 1.1 for SAP/BW)
    In the previous version (BW 7.0.1 SP 10) run correctly, but now is in error.
    Below the  BW error log:
    Error: COMMUNICATION_FAILURE with function RSB_API_OHS_3RDPARTY_NOTIFY and target system SQLIS.
    Error when opening an RFC connection (CPIC-CALL: 'ThSAPOCMINIT' : cmRc=2 thRc=679 Transaction program not regist).
    Error log of Integrations Services
    [SAP BI Destination 1 [476]] Error: Microsoft.SqlServer.Dts.SapBw.Connectivity.ERPException: An error occurred during the dispatch of the incoming function. The last return code was "RFC_FAILURE".
    em Microsoft.SqlServer.Dts.SapBw.Components.SapBwSourceBWLoader.ProcessInput(Int32 inputID, PipelineBuffer buffer)
    em Microsoft.SqlServer.Dts.Pipeline.ManagedComponentHost.HostProcessInput(IDTSManagedComponentWrapper100 wrapper, Int32 inputID, IDTSBuffer100 pDTSBuffer, IntPtr bufferWirePacket)
    [SSIS.Pipeline] Error: SSIS Error Code DTS_E_PROCESSINPUTFAILED.  The ProcessInput method on component "SAP BI Destination 1" (476) failed with error code 0x80131500 while processing input "SAP BI Destination Input" (491). The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running.  There may be error messages posted before this with more information about the failure.
    I checked the topic and notes below, but without success
    CPIC Return Code 679 - Transaction Program not Registered - ABAP Connectivity - SCN Wiki
    Note 1480644 - gw/acl_mode versus gw/reg_no_conn_info.
    Note 353597 - Registering RFC server programs
    Regards,
    Bruno

    Hi Bruno,
    We were able to resolve the issue. SAP RDS is assisting us with our upgrade and one of their consultants gave us this fix/workaround.
    Edit and add an entry into P:\usr\sap\<SID>\DVEBMGS00\data\reginfo.dat on your BW host server.
    Below is the entry I added.
    P TP=<NAME OF PROGRAM ID> HOST=<remote hostname where you creating the RFC to> CANCEL=<remote hostname> ACCESS=*
    P TP=CTSAPNPSCI_PORTAL_FPS HOST=ctsapnpsci CANCEL=ctsapnpsci ACCESS=*
    Then in BW system goto smgw > goto > Expert Funtions > External Security > ReRead ACL (N) & Globally
    I hope that this works for you.
    Regards
    James 

  • Error when opening an RFC connection (LB : Hostname or service of the messa

    Hi All,
    Im trying to transport datasources in BW, they are 7.x  RSDS datasources. but we did not change the source system, it was existing and we are using the same source for older BW version. we now installing new BW 7.x system.
    These  transports went fine in BQ system but failing in BP system with the below error :
    Error when opening an RFC connection (LB : Hostname or service of the message ser
    Error when activating DataSource 2LIS_17_I0NOTIF RP1CLT100
    Error when opening an RFC connection (LB : Hostname or service of the message ser
    Error when resetting DataSource 2LIS_17_I0NOTIF RP1CLT100 to the active version
    the datasource 2LIS_17_I0NOTIF is active in RP1CLT100 system. when this transport goes to prod it tries to overwrite the existing one, as there are no changes to the datasource the structure will be the same.
    but after that it cant able to activate that datasource.
    so my question is can we able to activate this datasource in RP rather than doing transport again from R/3 Dev---R/3 PRD.
    i tried RSDS_DATASOURCE_ACTIVATE_ALL but it doesn't help.
    another question is when we migrate from 3.x datasource to 7.x, does this change any metadata in R/3 system as well.
    Best Regards
    Robyn.

    Hi Rizwan,
    Looking at the error message it seems like there is some issue with RFC connection and whatever objects you are trying to move are not reaching to target system. Just have a check with basis team.
    Once you migrate DS from 3.x to 7.0 yes there will be some meta data changes e.g. the DS type will be changed from ISFS to RSDS. You will have to send the migration along with current data source.
    Regards,
    Durgesh.

  • Error when opening an RFC connection in IDT

    Hi Experts,
    I m trying to create a relational connection (JCO) from IDT to BW 7.4, and I m getting the following error:
    Error when opening an RFC connection (CPIC-CALL: ' ThSAPOCMINIT', communication
    I searched this error in Internet and I found many discussions about it ...And I think it's about autorizations in BW system that by default dosen't allow external servers to connect to it.
    So, I changed the values for the following parameters in RZ11 t-code:
    gw/acl_mode = 0
    gw/reg_no_conn_info = 0
    But I still get the same error ...When I checked the SM59 t-code I found that IDT create an entry in TCP/Ip connections ...
    Can you guide me to solve this issue...
    BW server is 7.4 version on AIX OS
    BO server is 4.1 SP05 on windows system
    Thank's a lot for your help.
    Abdess,

    Hi,
    test the RFC connection in sm59.If it is sussecfull then try to create conneciton otherwise see the error message.
    Amit

  • Error when opening table container file keydb read only

    Hi Guys,
    We are installing solution manager 4.0 on windows/sql but we are getting following error and couldnt continue the installation
    FKD-00070  Error when opening table container file C:\PROGRA1\SAPINS1\SOLMAN\SYSTEM\MSS\CENTRAL\AS\keydb.xml for writing. Possible reason: "read-only"
    ERROR 2008-06-04 20:10:56.843
    FKD-00049  XML - Parser error: error: no DTD specified, can't validate in line 1, 1
    in file C:\Program Files\sapinst_instdir\SOLMAN\SYSTEM\MSS\CENTRAL\AS\keydb.xml.
    Please help
    Regards,
    Santosh

    Further info
    keydb.xml is empty and the directory has got write access for everyone
    regards
    Edited by: Santosh Keerti on Jun 4, 2008 1:29 PM

  • Error When Opening the Setup/Transactions/ Sources Window

    Hi All,
    in Oracle E-Business Suite R12 Version
    Error When Opening the Setup/Transactions/ Sources Window
    APP-FND-01388: Cannot read value for profile option FND_DEVELOPER_MODE in routine &ROUTINE.
    ORA-01403: no data found
    FRM-40735: WHEN-CREATE-RECORD trigger raised unhandled exception ORA-06502.

    Amr,
    Please see the suggested solutions in these docs.
    App-Fnd-01388: Cannot Read Value For Profile Option Fnd_developer_mode In Routine [ID 563884.1]
    R12: How To Avoid The Error Message APP-FND-01388 On Drilldown [ID 556668.1]
    R12 APXINWKB Error APP-FND-01388 When Trying To Query Invoice [ID 864195.1]
    APP-FND-01388 Cannot Read Profile Option FND_DEVELOPER_MODE In Benefits Service Center Form [ID 422182.1]
    Thanks,
    Hussein

  • Error when opening document with ECL control: INVALID_DATA

    Hi Gurus,
    I've tried to search the net for this problem but could not find anything and I'm stuck now.
    Description:
    we're using ECL to view attached documents (to POs etc.) which are stored through ArchiveLink on the content repository.
    when we try to open this document, time-to-time we get following error:
    Error when opening document with ECL control: INVALID_DATA
    Message no. SDV004
    by time-to-time I mean that when we try to open same attachment again it opens successfully (sometimes we need to re-open it 3-4 times to get it)
    what we've tried is to enlarge timeout for HTTP protocol (tx SMICM, from former 30 to actual 60) but only effect we got is that we're waiting for the error longer time
    It will be really great if anybody of you guys can give me an advice where the problem can be or where should I look and what to check
    Thanks,
    David

    Hi Christoph,
    thanks for tip, unfortunately this was already flagged, currently settings are:
    for Display Settings:
    yes - include ECL control
    use HTML control
    empty - maximum viewer wait time
    (do you think that setting some value for this could help)
    yes - deactivate generic object services in viewer
    no - doc display as dialog box
    yes - deactivate data provider cache
    Storage Settings:
    yes - always copy document class from document type
    yes - permit multiple assignment
    Thanks,
    David

  • Error When Opening Document

    I receive the following error when opening a Web Intelligence Document, no matter the user.
    C​a​n​n​o​t​ ​i​n​i​t​i​a​l​i​z​e​ ​R​e​p​o​r​t​ ​E​n​g​i​n​e​ ​s​e​r​v​e​r​.​ ​(​E​r​r​o​r​:​ ​R​W​I​ ​0​0​2​2​6​)​ ​(​E​r​r​o​r​:​ ​I​N​F​ ​)
    I also cannot run any reports. Anyone have an idea? I cannot seem to find any information in the knowledgebase on that error.

    Phasenjager,
    It appears that in the past few days you have not received a response to your
    posting. That concerns us, and has triggered this automated reply.
    Has your problem been resolved? If not, you might try one of the following options:
    - Visit http://support.novell.com and search the knowledgebase and/or check all
    the other self support options and support programs available.
    - You could also try posting your message again. Make sure it is posted in the
    correct newsgroup. (http://forums.novell.com)
    Be sure to read the forum FAQ about what to expect in the way of responses:
    http://forums.novell.com/faq.php
    If this is a reply to a duplicate posting, please ignore and accept our apologies
    and rest assured we will issue a stern reprimand to our posting bot.
    Good luck!
    Your Novell Product Support Forums Team
    http://forums.novell.com/

Maybe you are looking for