Satellite A660-1EV turns off after 10min of gaming

I have problem with my cooling system.
The problem is that I run a game (FIFA 12) and after 10 minutes the laptop is turned off ... A while ago I sent it for repair from the place you bought it that I burn cooling and then the problem was gone .... Descriptions .. problem comes up after replacement of its cooling

hello, I was having the same problem with my A665-14F and I took it to Toshiba Authorized Service even though my warranty was expired. In exchange of some price they cleaned the dirt that was blocking the cooler (fan) to work properly and that solved my problem. I was afraid that the problem was due to some more serious hardware problems like graphic card or motherboard etc.
Message was edited by: ICK

Similar Messages

  • Can not turn on the monitor on Satellite after dispaly turns off after 10min

    hi..
    I have a problem with my laptop..
    when the display turns off after 10 minutes , it doesn't turn on again !!
    i move the mouse, trying to type on the keyboard, but it doesn't work..
    to turn the display on again i should close the lid to hibernate and open it again!!
    i hope that you will help me @_@ !

    Hello
    Check please http://support.microsoft.com/kb/917332/en-us
    To correct the behavior please download and apply the patch (KB917332) which could be found in the detailed resolution below. I hope it will help.

  • Satellite A660-18N - Powers off after waking from sleep mode

    My Satellite A660-18N powers off 2-3 seconds after waking from sleep mode. I upgraded the memory from 4GB to 8GB, using Crucial's website, so I know it's compatible. BIOS is updated to 2.00.
    Not sure what to do, how can I fix this without turning off Sleep mode completely?

    Hello
    >Currently I've turned off sleep mode altogether. I've also reset the BIOS settings from the boot menu but it hasn't fixed the problem
    And why you dont test it with pretested memory modules from an authorized service provider? The part number for such RAM is PA3677U-1M4G. Its one 4GB DDR3-1066 MHz memory module.
    Furthermore it would be interesting to know who says that Crucial memory is compatible Maybe its compatible to other Toshiba notebooks but fact is you have problems after waking from sleep mode and this happens only with Crucial memory and not with preinstalled modules.
    I dont think somebody here can provide you a solution for this because its just a compatibility issue and its user to user forum only.

  • Satellite L555-10N display wont turn off after 10min on non-usage

    Hi,
    I've recently acquired a Satellite L555-10N notebook, which until now turned out to be a good choice.
    I have a little problem, though:
    In my Energy preferences, I set the time at which the display should turn off to 10 minutes, if the notebook is not in use.
    Although this worked fine for the last days and weeks, the display now won't shut down at all.
    I have not made any changes to drivers or BIOS or whatsoever.
    I remember changing some preferences at the ecoUtility-Setup to enable it.
    At that point, I got a message that some preferences would have to be changed in order to enable the feature and I agreed.
    I could not notice any changes that were made, but from that point on, the display wont turn off any more.
    I would very much appreciate your help!
    Thanks!

    Hi
    Which OS you are using?
    For Vista and Windows 7 I have founded a good article about the settings in Windows Power Management:
    http://aps2.toshiba-tro.de/kb0/HTD84026Q0000R01.htm
    Furthermore you can change the settings for every profile. That means you have to choose the Turn off the display function for this power profile that you use or every profile if I use all of them.
    Check this!!!

  • Satellite M200 monitor turns Off after boot & battery won't charge

    Hello, I'm from Jakarta, Indonesia
    I have a problem with my Toshiba Satellite M200 Notebook (Running Windows 7 Home Premium)
    after i press the power button to power up my notebook, It works fine showing BIOS and Windows Boot Screen,
    but after that my monitor just suddenly turn off when Windows supposed to show login screen.
    sometimes the monitor don't turn off, but shows lower resolution (i don't know exactly what resolution, maybe 1024x768 or 800x600, i'm using 1280x800)
    so the only thing i can do is press the power button again to shutdown improperly then press the power again to power up, my monitor works normally
    try to shutdown then power up again in couple hours later, the problems comes again.
    from the moment i install Windows 7, i use 8.15.10.1930 driver version (downloaded from Intel Download Center, which included Intel TV Wizard)
    2 days ago my friend said that i should install the driver from Toshiba's support site, so i went to csd.toshiba.com and download the 8.15.10.1825 version from that site (which not included Intel TV Wizard )
    my monitor works normally after I installed the driver i've got from csd.toshiba.com, so i think that the problem because Intel TV Wizard somehow messed up with my notebook. But this morning this problem comes again, my monitor just turns off suddenly ..
    besides this problem my battery seems like failed to recharge, Windows shows my battery has fully charged, but when i plugged out my AC adapter,
    it just remains for 15-20 minutes before my notebook shut down automatically
    three months ago i just brought my notebook to local Toshiba Service Center and bought new motherboard to replace my old mobo (which have a VGA issue too!)
    there's something i can do (related to Windows or software/driver) or i have to bring my notebook to the service center again?
    are they somehow make a wrong wiring when replacing my motherboard?
    and am i have to replace my battery pack too?
    i've been using this notebook for about a year and half and there's nothing wrong with my battery before replacing the motherboard
    any help would be appreciated :D

    well, i can't find my model's driver in Toshiba Europe site,
    in Satellite M series it only shows M100 and M70 and not including M200
    i found http://pc.toshiba-asia.com which covering my region. after choosing my product they give me link to download Windows 7 driver, here's the link
    http://support.toshiba-tie.co.jp/windows7/download/Satellite_M200_32_sp.htm
    Windows7 Driver | Intel Display Driver | 8.15.10.1825
    they have the same driver version (and same size too) with my current driver i've got from csd.toshiba.com
    any other ideas besides the driver issue ?

  • Satellite M60/M55: Turns off after disconnecting power

    Reposting because the original threads are locked.
    http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=15285&messageID=55746
    My M60 sometimes turns off immediately after unplugging mains power (either the AC mains or DC plug from the laptop), instead of resuming on battery power, although the battery is full.
    The battery is OK & the laptop starts up regularly on battery power after pushing the on switch.
    The Toshiba Power Saver seems to work OK & I have the latest BIOS.
    I always save my work before disconnecting, but I still don't like this behavior & would appreciate some good advice.
    http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=19092
    Satellite M55 turns off when disconnecting power cable when disconnecting my laptop from the outlet rather than switching to the battery, my laptop will often simply turn off even though the battery is completely charged. Other times things work as they should.
    I had the motherboard replaced for another reason and was fairly surprised to notice the problem after replacement (but without OS reinstall).
    The main suspect is the TPS and its driver; some months ago a new version was released on Toshiba support site for M60 (though the file dates are not fresh, and I believe I have installed this version earlier).
    So, I removed both TPS and TPS driver. I tested many times and it did not happen again. Not even when I reinstalled them.
    While testing I turned off HD write caching to avoid file corruption problems (but this slows down HD operation, most notably hibernation).
    I'm not sure if this actually works because also earlier the computer would shut down just occasionally, not every time. But this may be a clue in case you have this problem. If you do, please test and report the result, no matter what the outcome is.

    What to say dude. The problem is that this issue happens ONLY sometimes and therefore its not easy to locate the real reason for such shutdowns.
    However, I would try to provide some useful hints but first of all it would be useful to know how old your battery is.
    Fact is that old and stressed batteries lose the own performance very quickly.
    My battery is about 3 years old and my notebook would run on the battery for about 10-20 seconds even though its fully charged. The performance is simple very weak!
    At the other hand the issue could be related to the faulty power supply electronic on the board
    As you see its not easy to say whats exactly wrong and as already suggested in the other threads (locked) you should ask a technician for a notebook check.
    The guys could run some diagnostic tests and could locate fault.
    Best regards

  • Satellite P850 display turns off after only minute or two of inactivity

    Hi,
    I have my Display settings set to turn off display after 1 hour when on power and 10 minutes when on battery.
    I have a screen saver set up to go on after 10 minutes.
    However, my display often (but not always) turns itself off after only a minute or two of inactivity.
    Can anyone explain this weird behavior?
    It starts up immediately I move the mouse but I just don't like things happening that I haven't scheduled.
    Thanks.
    Hoges

    Hi
    Could it be possible that you changed the settings in the power profile which is not in use?
    I mean in case another application like ECO Utility would control the display brightness, the changes in Windows power plant would be useless.
    Toshiba ECO Utility for example contains some settings like dim display after
    I think you should check this utility

  • Yoga display turns off after 1 minute

    I'm having an annoying problem with my new Yoga related to the display and have not seen any other posts with a similar complaint so perhaps this is a simple fix that I'm just not able to sort out on my own. My display turns off after 1 minute of inactivity. The only means for changing behavior like this that I am aware of is through the Control Panel Power Options. My settings for "turn off the display" are 10 minutes on battery and Never while plugged in (note screen shot attached). Regardless of my settings, the screen turns off after 1 minute. I've changed the settings to multiple configurations and restarted with no change in behavior. Perhaps there's some other settings area, maybe something specific to Lenovo that I'm not aware of (since this is my first Lenovo laptop). Anyone with similar problems or insight?

    This may be a Windows 8 issue. I finally fixed this problem by identifying the screen saver as the issue (and I wasn't using a screen saver). Type "lock the computer" into the search box after clicking the search charm, which brings up the screen saver dialog box. Mine was set to 1 minute, though I'd never set it myself. If you can't change it, choose a screen saver and you should be able to do so (and can then switch back to no screen saver). BUT, here's the problem. Other things you install (or settings within things you install) can apparently change and override whatever you type in for the delay time. Try applying your new time and exiting from the dialog box, then open it back up again. I was finding that it kept going back to 1 minute. To reset things so that you can get control again, type "user accounts" into the search box and when the dialog box comes up, choose "Reset Security Policies". Then you can go back to the screen saver dialog and successfully change the delay time. See http://social.technet.microsoft.com/Forums/windows/en-us/ace4085a-b0ba-4a98-898d-cd92d9e88e13/window... for some detail.

  • My screen darkens after 1 minute and turns off after 3.  All of a sudden, now, after the screen shuts down, it comes right back on????

    My screen darkens after 1 minute and then turn off after 3 minutes (energy saver).  Now, all of a sudden, after it shuts down it comes right on???

    thank you so much sir... i am very thank ful to u... it was an breath taking moment ... i was almost dead as it didnt work

  • Screen turns off after a few minutes and needs to be closed then opened

    hi, as the title suggests my powerbook screen turns off after a few minutes before my screensaver is set to come on and when i come back and press a key or move the pad it wont start up so i need to close the powerbook then open it up again for it to activate. its not a huge problem but my programs which connect to the internet seem to lose their connection when i open it up again. is this normal? is there a setting i can change?
    thanks
    ross

    Is there a way to "disable" Standby, Suspend and Off just when watching movies (in fullscreen or not)? I want them to do what they usually do in all other cases.
    Setting them to 0 in xorg.conf does the thing, but I need that functionality only when I'm wathing movies. Making a script that alters adjustments in xorg.conf isn't the best solution - you'd have to restart X every time you want to watch a movie .
    Cheers,
    Daniel

  • For the iphone4, my light is on all the time! the light is supposed to turn off after a few seconds of use. how can i fix this?

    for the iphone4, my light is on all the time! the light is supposed to turn off after a few seconds of use. how can i fix this?

    If what Allen says does not fix the issue I have seen this as a Hardware issue and I would get into an Apple Store if it is close by
    http://concierge.apple.com/reservation/us/en/

  • MacBook turns off after the startup bong when trying to restart

    Greetings,
    When I try to restart my MacBook it turns off after the startup bong.
    Thanks

    Have you tried resetting the System Management Controller? That is a good first step for power related issues such as this.
    Best of luck.

  • TS1363 apple sign shows up and then turns off after a few seconds, and i can not connect to my itunes

    apple sign shows up and then turns off after a few seconds, and i can not connect to my itunes

    I have the exact same problem trying to use the Remote app on both my iPhone 3gs and iPad 2 with either my Mac or ATV2.  My Remote app used to work on my phone - I can't recall if I ever actually used it with my iPad, but when I tried today, I got all the same results as you did (on both iPad, and then iPhone).  I  was using my ATV2 to play music from iTunes on my Mac and wanted to use the Remote app, but it would not connect to either device no matter what I did. 

  • My ipod shuffle turns off after exactly 30 seconds of play. Already had a similar problem?

    My ipod shuffle turns off after exactly 30 seconds of play. Already had a similar problem?

    Did you see my post above?
    Have you tried a different set up earbuds to see if that helps?
    What about resetting the Shuffle?
    Resetting iPod shuffle
    B-rock

  • HT1430 my iphone 4 turn off after appearing message "temprature high, need to be cool down after than doesn't becoming turn on"

    my iphone 4 turn off after appearing message 'temprature high, need to be cool down' after that does not getting turn on by anyhow.

    Hello vijaypatel,
    Thanks for the question. The following article outlines the temperature warning that you experienced:
    iPhone, iPad, and iPod touch (4th generation): Keeping device within acceptable operating temperatures
    http://support.apple.com/kb/HT2101
    If the iPhone is no longer powering on, we will need to isolate this issue to determine if it is hardware related.
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/TS2802
    Will not turn on, will not turn on unless connected to power, or unexpected power off
    - Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
    - Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion.
    Learn about LCIs and corrosion.
    - Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
    - After at least 15 minutes, if:
                   - The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
                   - The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
                   - Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
    - If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
                   - If the display turns on, go to step 4.
                   - If the display remains black, go to next step.
    - Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to
    restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
    - If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
    Thanks,
    Matt M.

Maybe you are looking for

  • Purpose of advanced properties in sender mail adapter

    helo all. hi i just wanna know the usage of delete messages once read generate fetch report security parameters SMIME Default XI parameters                    under sender mail adapter. waiting for your great response. bye. regards. seeta ram.

  • How to select the vendor from the source list in the PO(me21n) screen ??

    Hi How to select the vendor from the source list in the PO(me21n) screen. Is there any Sources of Supply tab in the PO just like we have in the PR. I don't want a PO raised from a PR which has got the Vendor assigned to it already. Or the SAP doesnot

  • Is Pentium 4 2.8GHz compatible with Satellite P100?

    Hi I have an 18 month old Satellite P100 with a 1.6GHz processor (not dual core) and want to know if this laptop will happily work if I fit a 2.8GHz Pentium 4 processor or will it damage the motherboard? Cheers Wacky

  • NLS issue in Java/PLSQL code [ using ROWID]

    I have NLS related question regarding the following scenario in Java/PLSQL code ::- OracleResultSet ors = (OracleResultSet) stmt.executeQuery("select rowId from t where t.col = 'XX'"); // The above query could return multiple rowIds. String strVal1 =

  • WLW deployment of WebApp fails, where manual deployment succeeds

    Hi, I have installed WL Platform 8.1 SP4 on W/XP Professional. I am attempting to do the most introductory task... i.e. deploy a web application consisting of two pages using WLW. The files are: <pre>SimpleForm.html</pre> <pre>SimpleFormHandler.jsp</