Satellite A660 DVD/CD-ROM drive does not detect discs

Hi there,
I have a Toshiba Satellite A660 with a MAT****A BD-CMB UJ141ES DVD/CD-ROM drive. It is about 18 months old and recently I have noticed that it does not recognise any CDs/DVDs. It makes a couple of noises once inserted but then stops spinning and nothing happens or changes in My Computer view.
Please note there seems to be no apparent problems with the drive:
- It is present in My Computer
- The device is working properly in device manager
Things I have already tried:
- Run Microsoft FixIt and CD-ROM/DVD Troubleshooter - both said it could not recognise media
- Deleted upper filter in the registry as per many suggestions (no lower filter present)
- Updated driver
I don't know what else to do. Please help as this is frustrating for a relatively new notebook which never is moved from my desk (don't expect many damaged parts).
Cheers

As I said: clean the laser lens
If you open the CD/DVD drive you will see the small laser lens.
Use cotton wool tip and alcohol
> Or at least provide a link?
Dont know any

Similar Messages

  • Satellite P105 - DVD/CD ROM drive does not work

    The DVD/CD ROM drive on my P105 does not work at all.  I've tried the registry fix for the upper/lower limit thing - didn't fix the problem.  The drive does have power, does spin a disk, but it is not recognized by the system.  It doesn't show up in the device manager at all.  I need to get this working and I'm hoping it doesn't need a new drive as this machine is out of warranty (of course!).  Thanks for any and all suggestions on hot to fix this problem.

    Howdy folks. This thread has a lot more views than the one I posted to, but go here to the following message for a possible solution to your CD/DVD Drive issue:
    http://laptopforums.toshiba.com/tshb/board/message​?board.id=brd_gen&message.id=3357&query.id=176774#​... 
    Cheers!
    D.Lex

  • Satellite M30X: DVD/CD rom drive does not work

    Hi,
    Hope someone can help. The above drive will not now recognise any inserted media. It whirrs for a while then stops. I have cleaned the lens and also run through the support and diagnostic tests and they cannot help me any further.
    I have also reinstalled the driver but no joy.
    Does this mean a new DVD/cd drive is required?
    Is it removable from the laptop and easily replaced?
    Where would i get the part - M****a DVD ROM UJ- 82OS ?
    How much would this cost?
    Thanks to all for any suggestions???
    Jim

    Hi,
    I had the same problem as you and I had to send mine for repair and they replaced it for me. My drive, same model as yours would not burn DVD's.
    Installing is quite easy:
    I HOLD NO RESPONSIBILITY FOR ANY DAMAGE DONE
    1. Turn the unit up-side down
    2. Remove every screw except the one securing the Hard-Drive, Memory Module and the one under the battery.
    3. Now get a Pin or a Straightened out Paper-Clip and push the Pin/Paper-Clip into the small hole of the DVD-Driveand slowly pull the drive out.
    4. Nearly there, Now you need to put your new DVD-Drive upside down because you have the unit is upside down as well.
    5. Once you have done that, you need to put all the screws back in place.
    6. DONE!
    Hope this helps
    machanic

  • My HP Pavilion dv6-3108ea cd-rom drive does not detect any dvd's or cd's........ help please!!!!!!!

    My CD-ROM drive cannot detect CD's or DVD's.  I have used the microsoft "fix it" tool and it doesn't detect that the driver is out of date nor does it need updating.  I have tried uninstalling the driver via the control panel settings  and restrating my laptop to see if it will reinstall the driver automatically but it always fails.
    Does anyone have any suggestions??? I would be very grateful.
    This question was solved.
    View Solution.

    Hi:
    You can try editing the registry.
    http://www.ehow.com/how_4927228_use-registry-fix-dvd-drive.html
    Paul

  • HP x720w 64GB Pen Driver Does not detect on Windows 7 Laptop

    HP x720w 64GB Pen Driver Does not detect on Windows 7 Laptop. While it detects on my PC. Same OS. Pls advise.

    I will have to wait until a Moderator inspects your image and makes it viewable.
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • My DVD-ROM drive does not work -- what steps should I take?

    MacBook Pro, a couple of years old. Was used by an employee for 2 years, now have it at home and found that the DVD-ROM drive does nothing when I insert a disc.
    What I really would like to know is what are the first steps with this. I don't want to send the machine somewhere. Should I just get a cheap external? Could it be software?

    If by Does nothing you mean it doesn't even pull in the disk. That sound slike hardware not software.
    I imagine it is out of warranty? If it is covered take it to be repaired in a mac store. If not I personally would opt for an external as the cost would be much more appealing. But doesn't hurt to inquire about the cost for having a new internal, or even fixing your current one.
    But for my money I would opt for external.

  • Cannot install windows 7 as cd drive does not reganise disc

    Hi
    Trying to install windows 7 on bootcamp but cd drive does not reganise the disc & keeps rejetting, please help
    Nudge1

    Hi
    The CD/DVD driver is part of the Microsoft system and also available on the Windows 7 installation disk.
    Therefore there are no special CD/DVD drivers available.
    I read about this theme in different forums and also on Microsoft support forum and mostly this issue appear if the Windows system disk is faulty/damage.
    I dont know from where you got this disk but I recommend you to download an Windows iso file from Microsoft server as mentioned here:
    http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=73726
    Then you could create own Windows installation disk or USB flash memory stick
    The serial key which you got with the Windows disk could be used for activation.

  • Satellite L955-10K - Synaptics Touchpad Driver does not work properly

    Hello, ASRR here.
    I've been having a problem with my Synaptics touchpad driver since yesterday. I am very used to using the "gestures" to work with my touchpad and the gestures haven't worked properly (in fact at all) for a while. The two-finger scrolling, the three-finger touch and others (actually all of the gestures) do not work anymore.
    The cursor moves, and works fine but the gestures don't.
    When I go to the Mouse option in the Control Panel, a window pops up stating that the PC is "Unable to connect to the Synaptics Pointing Device Driver." and asks me whether I want to uninstall it.
    I have tried uninstalling it, then going on the support page for Toshiba and downloading a driver that was suitable for my model, operating system, etc.
    When I set up the driver I downloaded and restart the PC, the same window pops up when I try and go to the Mouse options in the Control Panel and the gestures do not work.
    One interesting thing I noticed however, is the fact that when I roll back the driver (in the Hardware properties- then settings) the gestures work FINE. However, as it always asks you to restart the computer in order for the Rolling back of the driver to take place, when I do restart it, it sets the Microsoft touchpad driver from 2006; which does not include the gestures I need.
    I have tried multiple times to fix it but I can't. I went to the UEFI firmware set up and tried resetting it to default but with no success.
    I really do not know what to do. Could somebody PLEASE help?
    My Toshiba Model is a Satellite L-955-10K with a 64bit processor and originally installed Windows 8 operating system.
    Any help would be greatly appreciated. Thanks

    >One interesting thing I noticed however, is the fact that when I roll back the driver (in the Hardware properties- then settings) the gestures work FINE. However, as it always asks you to restart the computer in order for the Rolling back of the driver to take place, when I do restart it, it sets the Microsoft touchpad driver from 2006; which does not include the gestures I need.
    To me it looks like the Synaptics touchpad driver could not be installed properly and after the new restart the touchpad driver isnt indicated by the Windows 8 system.
    By the way: are you still using the Win 8? Didnt you upgrade the system to Win 8.1? Should do this since many different bugs have been solved in new Win 8.1 version.
    Back to the Synaptics touchpad driver.
    Usually the drivers should be downloaded from the Toshiba driver page but in some cases you could also use the drivers directly from manufacturer pages. In this case the touchpad driver has been released by Synaptics and it would be interesting to know how the touchpad driver from Synaptics driver page would act on your notebook
    http://www.synaptics.com/en/drivers.php

  • Satellite L300D-SP5001 Mat****a drive does not recognize blank CDs

    Hello Everyone,
    System Specs:
    *Model:* L300D-SP5001
    *OS:* Windows Vista Ultimate 32 bit
    *Memory*: 4GB
    *Processor*: AMD X2 64 Bit 1.9Ghz
    (I know Im wasting resources with the 32 bit windows)
    *Problem:*
    Blank CDs are not identified by the system, meaning it always says there is no disc inside.
    *Context:*
    Disc is inside, is writable (blank) and have tried with many different brands.
    The DVD-ROM is a Mat****a UJ-850S and is recognized (listed fine in the Device Manager), OS says driver is up to date and original discs are played fine.
    *Question:*
    What could I do to be able to burn cds? other than getting a more reliable brand and replacing the drive...
    Thank you!

    > However I do not have that record in my registry. I also use Nero and its also unable to identify any media in the drive. Im thinking the lens decalibrated (being it a laptop and having to travel long distances at times...) so perhaps I should get a new drive you think?
    Yes, maybe you are right and this is a drives laser lens issue I mean this can happen if the laser lens cannot calibrate in the right position in such case only the ODD replacement would help.
    But listen buddy. Did you try reinstalling the Windows?
    If not, try this because this should be always done in order to test if this could be an software issue
    You could also try to clean the laser lens using a cotton-wool tip and a alcohol
    In some cases this could be helpful.

  • CD/DVD Drive on HP dv6728ca does not detect disc

    When I insert a CD or a software program into my CD/DVD Drive on my HP Pavilion dv6728ca, nothing happens. I am running Windows 7. I have tried several self help Fixits but nothing seems to work.

    Hi,
    The following procedure will test if your notebook can start from a bootable disc in the CD/DVD drive - the advantage of trying this is that it will rule out any possible Windows driver error as the CD/DVD drive is under the control of the Bios when starting the notebook.  So if you find that the notebook will not boot from the CD or DVD, then it's almost certainly a Hardware fault in the optical drive itself and it will need to be replaced.
    Using another PC to create a Windows 7 Rescue CD and DVD.  Download the relevant ISO from the link below.
    Windows 7 32bit
    Windows 7 64bit
    You need use an application such as ImgBurn to correctly burn the ISO to a CD and then also burn it to a DVD - a guide on using ImgBurn to write an ISO to a disc is Here.  Once created, insert the CD and then restart the notebook and see if it boots from this disc - if it does, let the first screen come up ( this will show repair options etc ) then just remove the CD, insert the DVD and restart the notebook again to see if it will also boot from this disc.  If the notebook will not boot from the CD, it may just load straight into Windows, in which case, just remove the CD, insert the DVD and restart to see if it will boot from this disc.
    Let me know.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • Re: Satellite A200-1MY: XP sound driver does not work

    Hello,
    I have a problem concerning my sound driver ( I use windows XP) . I installed all the xp drivers and it still doesn't work.
    Can anyone tell me where to get a working driver ?
    Thanks.

    I hope you use WXP SP2. Anyway check please this thread. Try to use instruction given by Eldorado.

  • DVD drive does not recognise CD/DVD

    Ok. SO recently my G42-230US notebook computer just does not play CD/DVDs. The drive opens, the green light appears on the side but when I go to my computer, my DVD/CR ROM drive does not appear. Can I get some help with this problem?

    Hi,
    First, try the automated fixit from Microsoft on the link below.
    Windows 7
    Check if the drive is now working.
    If the drive is still not working, from the Start Menu, open All Programs, open Accessories, right click the Command Prompt and select 'Run as Administrator'.  In to the prompt type the following command and hit enter.
    sfc /scannow                 ( note that there is a space between sfc and the / )
    Let the process complete, then type exit and hit enter.  
    Next, from the Start Menu, open the Control Panel and click on Device Manager.  Next click to open DVD/CD-ROM Drives.  Right click the drive and select uninstall.  Do not delete drivers if asked.  When the device has uninstalled click on the 'Scan for Hardware Changes' icon ( usually just below Help on the toolbar ).  Let windows reinstall the drive and see if it now works.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • Satellite Pro C660-1NQ does not detect WLan network

    Hi Guys,
    We have a Toshiba Satellite Pro C660-1NQ here which does not detect the wireless network at all,
    I have checked device manager and the wireless card does not show in here.
    I tried scanning for new hardware,but nothing was found. I tried turning the wireless off/on with the function and F8 keys but still not showing in device manager or finding any new hardware.....
    Any ideas as to what i can try next?
    Cheers,
    Ash

    Hi
    It seems that the notebook would support the Atheros 802.11agn Wlan card.
    Usually the Atheros Wlan card should be listed in device manager under in the menu Network Adapters.
    If its not listed then I recommend installing the WLAN driver which can be downloaded here:
    http://aps2.toshiba-tro.de/wlan/?page=downloads
    Choose the Atheros Wireless LAN Adapter Windows 7 (32/64) 9.2.0.419.0 or newer
    Hope this helps to detect the Wlan chip!!!

  • Satellite A200-AH5 CD/DVD drive does not burn any CDs

    I own a Toshiba Satellite laptop (A200 -AH3) running Windows Vista Home Premium.
    For what it is worth, the processor is a T2085 @ 1.73 GHz. It is a 32-bit Operating System.
    In Device Manager when I click on DVD/CD Rom drives, I get TSSTcorp CD/DVDW TS-L632D ATA Device.
    Clicking on this I find that the driver is working properly and up to date. I have not been able to burn a CD on this system...
    I have not tried to burn a DVD.
    I have run through all the steps for burning a CD, however, but even though it goes through the process of showing the progress as each song from a playlist is burned to disc, when the disc is supposedly finalized...there is nothing on the disc when I try to play it back and with the exception of iTunes or another program opening when I place the CD into the drive to be played, absolutely nothing happens.
    I tried burning music on a disc on my sister's desktop computer and it burned fine.
    So...It is not a problem with the discs.
    When I took the disc my sister had burned and placed it in the disc drive on my laptop, it displayed the tracks that had been burned and it played the music just fine. This has me really thrown for a loop.
    The laptop is only a year old and I can't burn a single thing.
    Unfortunately, the warranty has expired. I am desperate to get this problem fixed. I have no idea if it will burn a DVD, but I have ruined 2 boxes of CD-R discs already. After the disc has supposedly burned the music...even though no music has been burned...the disc is ruined and has to be tossed.
    I am not terribly knowledgeable about techncal aspects of computers, so I hope you can speak to me in general terminology if you respond to my problem. I really hope someone out there can advise me as to what is going on or what I should do to resolve the problem.
    Thanks for any help in advance!
    Thanks.
    Gord
    Canada

    Hi
    In your case I would recommend trying different CDs from different manufacturers.
    You should know that not all CDs or DVDs would be fully compatible with your internal CD/DVD drive.
    In many cases not compatible CD or DVD would cause exactly the same issues which you have described in your message so try different medias!
    Furthermore I would recommend checking the Toshiba driver page for an CD/DVD drives firmware update.
    As Im not mistaken the Satellite A200-AH3 belongs to the Canadian series and you should check the Canadian page for some new firmware. Maybe a new firmware is available
    Last but not least you could switch to other burning software Im using the Nero In my opinion its the best applications for such purposes

  • Re: CD/DVD drive does not seem to start DVDs in Satellite P750

    My CD/DVD drive does not seem to start DVDs, it would turn and turn and the only way I can start a DVD (i.e. a movie) is by using Windows Media Centre, while software to be installed needs to be activated from Windows Explorer.
    Anybody?
    Please help.
    Thanks!

    Thanks, Xaver, tried this, still won't autoplay, it will just turn the dvd around for a while and then stop. Though when I open Windows Medi Centre and choos 'play DVD', it does the trick. The only way to install software, though si through Windows Exp[lorer and searching relevant file. Cheers,
    Havoc.

Maybe you are looking for

  • It's just fantastic

    When iPad was announced I thought '"Why?". Then I wondered what the display would be like as it is a lower resolution than even current iPhone. Then I bought one ( after reading posts and asking questions on this forum) Now I have it it just makes se

  • 7.5.2 will cause problems with Iphones

    Hi All I have found that once you have upgraded to the last Iphone IOS and Time Capsule OS 7.5.2 you won't be able to connect wirelessly anymore. This does not seem to affect my Macbook Pro connection. As soon as I downgraded the firmware on the Time

  • How to edit ALV report using function modules

    I have a ALV report , i want to edit the report using function modules. how can i do that... Edited by: ms kumar on Mar 6, 2008 3:24 PM

  • Ongoing problem with Select File Window on CS4

    For a couple of years, I have been experiencing a pesky problem with the Select File window.  Whenever I go to insert an image or update the path to an image on an dynamic page (.asp) , the Select File window opens up and looks really strange. The Fi

  • To move the wagetypes from infotype pa0008 subtype 11 to subtype 0.

    Hi all, I have a requirement wherin i have a need to copy the wagetypes from infotype pa0008 subtype 11 to pa0008 subtype 0 based on the begin date i.e., if if the begda of subtype 11 is greater than begda of subtype 0 it has to be copied. This has t