Satellite A660 How can i turn off the lighting of the power button?

Hello, I recently bought a new Toshiba A660-1FL.
However bothers me is the lighting of the multimedia keys, if I work in the dark.
In Bios I could turn off the led illumination, but the power on/off button is still lighting,that distracts me when i am working.
This notebook has two power LED, so the power on lighting is in my opinion, unnecessary.
My question is: How can i turn off the lighting of the power button?

Here you can see the LED with the same function in front of you: http://s3.imgimg.de/uploads/t009aae62jpg.jpg
Yes in fact, the difference is color, design, but also location and brightness of the LED.
For me, this LED is too bright and it is distracting in the dark, as you can see here: http://s3.imgimg.de/uploads/leddf570760jpg.jpg
I was today at a local electronics store, and saw that Toshiba has the brightest Power LED on A660, but why it must be placed under the LCD and not in the front as in my old notebook Toshiba A210.
I also had the idea with a tape, but it would look ugly, and it must be removable without residue.
P.S. Also the fingerprints on the glossy keyboard do not look nice.

Similar Messages

  • How do I turn off the Power button Lockout on my HPw1858 monitor?

    How do I turn off the Power button lockout on my HPw1858 monitor?
    This question was solved.
    View Solution.

    Hi,
    Power Button Lockout is displayed.
    The monitor's Power Button Lockout function is enabled.
    Press and hold the Power button for 10 seconds to unlock the Power button function.
    If the above doesn't work then try a monitor reset.  Unplug the monitor’s power cord and hold down the monitor’s power button for 30-60 seconds. Plug the monitor back in and power it up.
    HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
    HP Photosmart Premium C309G, HP Photosmart 6520
    HP Touchpad, HP Chromebook 11
    Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
    Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
    Windows 7/8 UEFI/Legacy mode, MBR/GPT

  • How can I turn off the Download button in galleries?

    I have a few galleries on my website but I don't want that Download tab there that appears automatically. How can I turn it off?
    Thanks for your help!

    Look :

  • Satellite L600: How can I turn off the main Wireless Communication Switch?

    Hello! Would be very grateful for any help....after struggling for 3 months I finally signed up here hoping to get some help.
    I have a new Satellite L600/ Win7 Home Premium.
    My questions is that I can not find where the MAIN wireless switch is in order to turn wireless off COMPLETELY.
    Everytime I start up, the wireless (orange) light switches on automatically.
    I have to wait till start up finish and manually turn it off by Fn-F8.
    When I open ConfigFree, (or Connectivity doctor), the diagnosis on the bottom left says [STATUS" Wireless Communication Switch: ON]
    This tells me the main switch is somehow still ON.
    I called Toshiba twice and they couldn't find it either.
    They said the new versions of BIOS doesn't allow it...? And for this model there is no physical switch built on the PC itself.
    I have looked everywhere and did the following:
    (1) Disable the adapter from Device manager.
    (2) In HWSetup, where there used to be an option to click the wireless switch off, it is not there anymore.
    (3) I went into BIOS setup and could find nothing remotely related to wireless/bluetooth to switch.
    I'm just wondering why there is a laptop with wireless switch ON permanently? But if it's ON, there must be a way to switch it off. Press Fn-F8 every time on start-up is not a long term solution as risk is I'll forget one day).
    As my last laptop was hacked before it is top priority that I know how to turn off ALL wireless function. So even if I have to do it via Commands, I will try it. Also, I'm not sure if anyone else experience the same with this model, or is this a defect in my particular PC?
    Any help or same experience will be much appreciated, thank you.
    I disabled the adapter in the device manager.
    When I open ConfigFree, the Connectivity doctor tells me the Wireless Communication Switch: ON

    Hi thanks for your replies! Sorry if I'm slow on the forum, at first I couldn't find where my thread went! Apparently it's moved to under Wireless. Is there alert message to let us know when my question is being moved?
    Thanks Paolo30, I am glad to know that Fn-F8 is enough. when I check Network Connections, the Atheros adapter is 'disabled'. Sorry may I ask if WLan card you are talking about in device manager = Atheros adapter? (Despite reading furiously on books to patch up my ignorance on the wireless last few weeks, still not sure the difference between 'adapter' and 'card'... :) Are they the same thing?
    Thanks Xardas. I checked the status in device manager and Atheros adapter is 'disabled'. I'm glad to know everything is ok if I see that! :) As my laptop was tampered wirelessly (and I don't know how they did it), I bought a new one and it's important for me to know it's 100% safe. Still, I want to tell Toshiba engineers it would be great to find out where this mysterious Switch is. It's not good to feel there is some sort of wireless capacity always ON and my PC may be emitting some wireless signals for serious baddies?

  • How can I turn off the WLS 6.1 security in order to develop my own application-based security module?

    Dear Colleagues,
    I am currently developing a J2EE application using WLS 6.1.
    My team and I have to implement a security requirement to suit our company's needs.
    The security requirements are that, users' password need to be aged (30 days maximum) and we need to provided a GUI front-end (JSP) to allow users to change their password when these expire after 30 days.
    Our internal contacts in the company, have already taken the lead to find out about whether we will be able to use the WLS 6.1 platform to do this and the answer we got back, was.
    Now we need to develop our own security module.
    I have 2 questions:
    1. How can we turn off the WLS security in order develop our own application-based security module?
    2. How can we develop a security module that allows us to age users' password and provide them with facilities to change their passwords when these expire?
    At the moment, we are using the default BEA WebLogic login.jsp page and there some configuration in the web.xml for this. I will be grateful if you could advise me on how to turn this default security off so that we can write our own security module.

    hi,
    1.You can write your own realm in 61 which can plugged for your security
    calls.
    2. once you write your ownrealm.. you can access it through weblogic
    api/ur api..
    thanks
    kiran
    "Richard Koudry" <[email protected]> wrote in message
    news:3dd0d081$[email protected]..
    Dear Colleagues,
    I am currently developing a J2EE application using WLS 6.1.
    My team and I have to implement a security requirement to suit ourcompany's needs.
    >
    The security requirements are that, users' password need to be aged (30days maximum) and we need to provided a GUI front-end (JSP) to allow users
    to change their password when these expire after 30 days.
    >
    Our internal contacts in the company, have already taken the lead to findout about whether we will be able to use the WLS 6.1 platform to do this and
    the answer we got back, was.
    >
    Now we need to develop our own security module.
    I have 2 questions:
    1. How can we turn off the WLS security in order develop our ownapplication-based security module?
    >
    2. How can we develop a security module that allows us to age users'password and provide them with facilities to change their passwords when
    these expire?
    >
    At the moment, we are using the default BEA WebLogic login.jsp page andthere some configuration in the web.xml for this. I will be grateful if you
    could advise me on how to turn this default security off so that we can
    write our own security module.

  • How can I turn off the yellow pop-up tool tips?

    Howdy,
    I have searched high and low in the preferences and found nothing that does the trick. How can I turn off the yellow pop-up tool tips?
    See attached screen shot. They are incredibly annoying. It's probably obvious, but I cannot find it anywhere on internets or this forum.
    Thanks!

    Thanks Nancy. Unfortunately that doesn't do it. I turned those off awhile back. Nor can I find anything under VIEW that seems to make a difference.  Just FYI: I'm on a Mac OS w/Dreamweaver CS6 - but this has happened on previous versions of DW. Thanks again.

  • How can I turn off the sound from the original midi  or audio tracks when I turned on the duplicate tracks for editing ?

    How can I turn off the sound from the original midi or audio tracks when I edit or listen to the duplicate tracks in Logic Pro 9 ?
    I'm using iMac desktop with Mac OS X Version 10.7.3. Pls advise.

    Dan,
    It sounds like one of your preferences has changed.
    Go to preferences > audio > general, and make sure "track mute/solo" is set to "CPU saving (slow response)". It is probably set to "Fast " at the moment.
    This setting (fast) basically causes immediate muting from the channel strip while your song is in play. This is because the audio is still being read from the hard drive, but the channel strip is simply muted.... like a hardware mixer. When set to "CPU saving", the audio from that track, when muted, is actually stopped from streaming from the hard drive, but there is a couple second delay before the audio is actually muted.
    One would think that the fast setting is generally preferable, except when you need to do what you are doing. The only way to keep duplicate copies of channel strips acting independent of one another is to leave this setting on the "CPU saving" setting.
    Hope that helps

  • I am using earphones, but the external audio of my mini ipad is still on. How can I turn off the external audio while listening with my headset?

    I am using earphones, but the external audio of my mini ipad is still on. How can I turn off the external audio while listening with my headset/earphones?

    Other than iMovie, GB always incorporates the audio files into the GB package. So just save or move the GB project to the external drive, and you're done - anything you import, edit or record will be saved to the external drive.

  • How can I turn-off the apps which I have opened once in ISO 7.0.2. In previous version of ISO it was easy to turn- the opened apps by double clicking on home button and then click and hold on respective apps then click on cross sign.

    How can I turn-off the apps which I have opened once in ISO 7.0.2. In previous version of ISO it was easy to turn-off the opened apps by double clicking on home button and then click and hold on respective apps then click on cross sign but in this version I could not do so and my iPad appears slower.

    Close inactive apps
    1. Double tap the home button to bring up the multi-tasking view
    2. Swipe the app's windows upwards to close
    3. The app will fly off the screen

  • How can you turn off the braille setting on an iPhone 4s, once on it won't let you slide the phone into use mode to change the settings or do anything?

    How can you turn off the braille setting on an iPhone 4s, once on it won't let you slide the phone into use mode to change the settings or do anything?

    An alternate method is Accessibility Settings when connected to iTunes. You should be able to turn it off there. I would also check out some of the answers listed to the right of this post and see if they can help.

  • How can I turn off the wireless modem on my HPG5200uk Desktop?

    How can I turn off the wireless modem on my HPG5200uk Desktop? I have an ethernet connection, and don't want to be blasted by unnecessary radio waves.
    This question was solved.
    View Solution.

    Hi,
    You may not have a wireless network adapter.
    If it is not in Network Adapters and you have no Device Manager errors or disabled devices under Network Adapters then that would be the case.
    Jaco
    Errare humanum est.

  • How can I turn off the 2 blue lines running vertically in my image in Photoshop?

    How can I turn off the 2 blue lines running vertically through my image in Photoshop? I want to save my work but do not know if these lines will persist in the saved image.

    normfb wrote:
    I assume the Rulers are showing. In that case, to get rid of each line use the Move tool to straddle the line and drag it whence it came. I really didn't need to add this comment but it is the first time in years I have had a chance to use the word "whence".
    Is this a guide I see before me? Doeth it conspire to confuseth mine eyes with sapphire lines that afoul my worthy parchment, and draw my quill from its righteous path? Be gone foul guide from whence thou cometh.  Verily, forsooth, and hey nonny nonny.

  • HT1657 How can I turn off the scrolling movie ads in itunes store?

    How can I turn off the scrolling movie ads across the top of the screen when I open the itunes store and am in the movies section?

    Thanks varjak paw.
    I was afraid this was the case.  To the degree that Apple marches down this well-travelled road towards making money by trying to pound customers into submission with flashing ads, etc. that actually serve only to aggravate and drive away at least people like me (28 year user of macs) from both Apple and whatever is being advertised, and indeed get in the way of my being able to efficiently do what is my part of what I always thought was the core of the synergism between Apple and its customers -- them innovating to provide the best tools to help us to be creative and productive, then the company will find itself sharing that space with myriad other companies so bankrupt for ideas and innovation that they have no other possible strategy that to promote mindless consumerism.  That does not seem a place of strength for Apple and a complete forfeiting of its unique position.  Sad to watch.

  • Remove age from birthday notification: I don't know the years most of my contacts were born, so I keep getting a default year 2000 birthdate. How can I turn off the age (xxth birthday) in Birthday Calendar - it really is very annoying!

    I don't know the years most of my contacts were born, so I keep getting a default year 2000 birthdate.
    How can I turn off the age (xxth birthday) in Birthday Calendar - it really is very annoying!?
    Thanks
    Tim

    Where do you see the default birthday showing as Nov. 30? If you can explain that, I can probably modify the below script to do that clean up.
    In response to the original problem:
    I'm not sure why I missed the original reply, but here is an Applescript that will change all the years of any selected contacts to 1604 (default for no year).
    tell application "Contacts"
              set thePeople to selection
              repeat with aPerson in thePeople
                        set theDate to birth date of aPerson
                        if theDate is not missing value then
                                  set the year of theDate to 1604
                                  set birth date of aPerson to theDate
                        end if
              end repeat
    end tell
    copy and paste it into a new Applescript Editor document. Select all the contacts you want to change (in Contacts), then run this script by clicking on the green Run button in Applescript Editor.

  • How can I turn off the images of avatars that post...

    how can I turn off the images of avatars that post in this forum? they are annoying.

    I think the avatar pictures help a lot to visually tell apart the different users participating. Pictures are way quicker to discern than user names are.
    Do you want them removed because they distract you or you find certain ones disturbing (You can easily flag those to the moderation team)?
    Follow the latest Skype Community News
    ↓ Did my reply answer your question? Accept it as a solution to help others, Thanks. ↓

Maybe you are looking for