Satellite A660 - How to change from 32bit too 64bit system
Howdy!
I bought a New Toshiba Satellite A660 i7-2630QM with windows 7 home premium.
My problem is Toshiba includes instructions for the first start up and it says i can choose between 32 bit operating system and 64 bit operation system, but when i turned it on the first time it did not give me any option/choice.
Now ive got 6GB memory and can only use 4GB because its set too 32 bit system is there any easy way to change it as I dont have a windows disc, all the software is preloaded?
Hi
I think this info is mentioned in user manual.
First of all you can create a Recover Disk with the Toshiba image.
You should create such disk using the preinstalled software called Toshiba Recover Disk creator (or Toshiba Recovery Creator).
Furthermore there should be a possibility to recover the notebook using the HDD recover.
During the HDD recovery, the setup should provide an option which would allow you to choose between the 32bit and 64bit.
But just one question: what A660-xxx do you have exactly?
Similar Messages
-
Satellite C660 - How to change from 32 bit to 64 bit operating system?
Can some one please tell me how to change from a 32 bit to a 64 bit operating system for my Toshiba Satellite C660 Notebook?
No cds came with my notebook so I can't restore.
I installed the 32 bit when setting up by mistake and would now like to change.
Thanks in advance>No cds came with my notebook so I can't restore.
In user manual you could find a info that recovery disk needs to be created using preinstalled software called Toshiba Recovery Media (disk) Creator
>I installed the 32 bit when setting up by mistake and would now like to change.
The Toshiba image of some notebook models contains the Win 7 32bit and 64bit system.
Not sure if your image supports both versions so cannot say for sure if you would be able to switch to 64bit but try this:
http://aps2.toshiba-tro.de/kb0/HTD1303440001R01.htm
During HDD recovery procedure you should be asked what version you want to chooseof course if both versions would be available so check thisotherwise you will need to purchase an 64bit version. -
How to change from Photoshop CC to Photoshop Photography Program?
Is it possible for me to do this change? I don't mind to get tied for another year.
Please let me know. Thanks!
P/S: I saw some support staff has been helping to cancel the subscription for Photoshop CC and allow them to subscribe the Photography Program, can I have the same treatment as well? Thanks!Well it’s not easy it seems. Some got help in two minutes others, like us, nothing?????
Perhaps it only works in the USA not in Europe?
Regards
Jean-Luc.
Verzonden met Windows Mail
Van: M Angus
Verzonden: vrijdag 29 november 2013 18:20
Aan: Pick Axe Photoworks
Re: How to change from Photoshop CC to Photoshop Photography Program?
created by M Angus in Adobe Creative Cloud - View the full discussion
Hello, same here too. How do I change to the Photoshop offer.
I have been trying to speak to Customer Services for 2 days now - despite promise to call me back I am still waiting. (At the time of writing I', listening to that damned musak - waiting waiting....)
Cheers
Magnus Angus
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5885361#5885361
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5885361#5885361
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5885361#5885361. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Adobe Creative Cloud at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0. -
Changing from 32bit to 64 bit Creative Cloud version
Since 3 month I have a licence for Photoshop ceative cloud. No I decided to change from 32bit Labtop to 64bit Labtop because to be faster for the adobe applications.
How can I install the new 64 bit version on the new Labtop with the existing licence agreement?
Best regards
EgonThe same may which you have installed on your 32 bit computer.
Creative Cloud desktop will detect and install the correct version on your computer.
You can download the products from
Explore Adobe desktop apps | Adobe Creative Cloud -
How to change from FM to AM radio on ipod nano
how to change from FM to AM radio on ipod nano
Meryl-elsbeth,
The iPod Nano only has an FM antenna/receiver. It is not possible to use the AM band on an iPod Nano. -
How to change from member to owner 800 # dont work no promps for that
how to change from manager to owner 800# don't work
oops, that was a typo ; prepaid accounts only have Account Members.
-
How to change from 32 bit to 64 bit
I downloaded Slingplayer and they suggested to change to Firefox and then change from 32 bts to 64 for better performance for watching movies on dishonline
>No cds came with my notebook so I can't restore.
In user manual you could find a info that recovery disk needs to be created using preinstalled software called Toshiba Recovery Media (disk) Creator
>I installed the 32 bit when setting up by mistake and would now like to change.
The Toshiba image of some notebook models contains the Win 7 32bit and 64bit system.
Not sure if your image supports both versions so cannot say for sure if you would be able to switch to 64bit but try this:
http://aps2.toshiba-tro.de/kb0/HTD1303440001R01.htm
During HDD recovery procedure you should be asked what version you want to chooseof course if both versions would be available so check thisotherwise you will need to purchase an 64bit version. -
HT2534 How to change from US apps store to Indian apps store for I Pad
How to change from Us apps store ti Indian apps store to purchase apps
1. Tap "Settings"
2. Tap "iTunes & App Stores"
3.Tap "View Apple ID"
4. Enter your user name and password.
5. Tap "Country/Region."
6. Tap "Change Country/Region"
7. Select the region where you will be located.
8. Tap "Done".
Make sure you have credit card and address for that country. -
Re: Can I change from 32 to 64bit?
Is it possible to change settings to 64 bit after the quick installation. Just bought this and with 4GB of mem probably chose wrong option?
*@vinay_1*
>I am also having same problem. I don't want to loose the preinstalled softwares that comes with my laptop such as Microsoft office starter and other Toshiba softwares and drivers. Can anyone give me the solution
If you bought the Toshiba notebook which was equipped with both OS (32bit and 64bit) then you could simply start the HDD recovery and could choose Win 7 64bit system.
Then Win 7 64bit, tools and drivers would be installed which are part of the Toshiba image.
If dont have Toshiba notebook where the HDD recovery contains Win 7 32bit and 64bit system, them you have to install Win 7 64bit from Microsoft disk and in such case you will loose the drivers and tools. In such case you will need to download the drivers from Toshiba driver page. -
How to change the language of administrator system message in outlook
I wonder where is the option which changes the language of the text
related
to : Your mailbox is over its size limit send by the system
administrator ?
Some mailboxes get this message in French and other in
English ?
Is anyone can help me ?
I work with French Outlook 2003 sp2 and
English Exchange server 2000 sp3
I try to change the regional setting on the
server but nothing has changed.
Thanks,Hi,
Please refer to this duplicate thread below:
http://social.technet.microsoft.com/Forums/en-US/5afe1e1a-82a9-445f-bcce-a76173ceb6bb/how-to-change-the-language-of-administrator-system-message-in-outlook?forum=outlook
Regards,
Melon Chen
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs. -
Oracle 10g XE migrate from 32bit to 64bit becomes slower
Oracle 10g XE migrate from 32bit to 64bit becomes slower
Currently we have a database using Oracle 10g XE R2
(Oracle Database 10g Express Edition Release 10.2.0.1.0)
on a linux 32bit server.
And recently we did migrate it to another 64bit linux server.
But found after migration is it running slower at 64bit server (~ 25% slower)
1. We would wonder any tuning is required on 64bit server?
Besides, as I know Oracle XE only using single core CPU for processing.
On 32bit linux the CPU is Intel(R) Xeon(R) CPU E31235 @ 3.20GHz
On 64bit linux the CPU is Intel(R) Xeon(R) CPU E5-2470 v2 @ 2.40GHz
2. Would the CPU clock speed on a single core also made the 64bit Oracle slower?
Thanks a lot.32 or 64 bit normally won't cause much performance difference as long as you can't use > 4GB RAM
Please note that XE can use only 1 core and 1GB memory.
According to benchmarks, Single Thread Rating of the 2 CPU really differ by around 25%. Quite consistent with your observation.
Of course, IO (i.e., disk) speed is also an important factor.
https://www.cpubenchmark.net/cpu.php?id=2003
https://www.cpubenchmark.net/cpu.php?id=1200 -
Satellite P300-19P - How to change from NTSC to PAL?
Everytime I want to display on my TV I have to change the TV from PAL to NTSC as I can't find how to change the S-Video output on the laptop from NTSC to PAL.
Does anyone know how to?
Cheers.Hey,
Im not owner of Satellite P300 but either you can change this option in BIOS or in display driver. Normally there you have an option to change between PAL and NTSC on S-Video output.
Check this!!! -
Qosmio X505 - How to change from 64bit to 32bit?
I just got my new qosmio x505
bij setup I missed the part where you can choose between 32 and 64bit so I have 64bit on it now, but most of my programms wont work now.
How to change to 32 bit?hi
also from licence perspective it is not allowed. if machine comes with a win7 x64 OEM licence you are not allowed to install win 7 32 bit. (it also should not be possible with the key provided on the licence sticker)
Only if you buy a full version you can choose (NOT OEM!), within the Retail! Version normaly both (32 and 64 bit) DVD's are included but you only allowed to install only one Version on one PC (32 OR 64 Bit) ...if you buy OEM (only allowed with new PC or HDD) you have to buy 32 Bit OR 64 Bit Version. (also no installsupport included in the OEM Versions)
So from this point of view... you have to buy a full retail version of windows 7 or a new hdd with an 32 Bit OEM WIN7 in order to do not have licence issues.
(OEM versions are always cheaper)
Regards
Message was edited by: mosera -
How to change from SLIM to KDM?
Hello,
I'm using the MATE desktop, OpenBox as window manager and SLIM for login.
I'm starting to feel tired of not being able to change between various desktops without closing the main one, I mean, with OpenSUSE Ctrl+Alt+F1 to F6 are terminal ttys (it is so with Arch+SLIM too), Ctrl+Alt+F7 to F12 are graphical ttys, you can change between any of them and log in as any user you want without closing the F7 tty, or closing it, or doing whatever you want. This was petty cool in order to kill some broken task that hanged the screen or in order to do whatever.
May I don't know how to do it with SLIM, but anytime I do Crtl+Alt+F9, for example, I just got a blank screen with an hyphen blinking. With OpenSUSE I got a graphical login screen.
More:
I've got installed OpenBox, MATE and enlightenment. It is suppose me to be able to change between them pressing F1, and in fact SLIM changes where says "session: XXXX" between them at the login screen, but whatever I choose SLIM ALWAYS log me in MATE. I've got to change it manually in ~/.xinitrc and logout and login again every time I want to change between sessions. I cannot do it directly at the login screen.
Sometimes after login out and login in several times SLIM hangs and I have to reboot.
I think all these problems comes from slim, and since with OpenSUSE, that use kdm, I had no problem I want to try kdm as login manager, but I haven't seen any guide to do it if you've got a login manager already installed. I've seen it just if it is the first system installatio. And I'm a little scared of breaking my login and spend too much time fixing it.
How can I change from SLIM to KDM without pain?WOW, I had to install kdebase-workspace and it installed as dependency a functional kde system . And... I was able to choose between all the other desktops but MATE, so... kdm and all that it installed with it's already uninstalled
But with kdm I was able to open an enlightenment session in tty 8 without closing kde in tty 7...
ewaller wrote:Install kdm.
Disable the slim service using systemctl
Enable the kdm service using systemctl
No need to uninstall slim. Hang on to it until everything is working
Thank you ewaller, it worked perfectly
Scimmia wrote:Well changing to kdm is as simple as using systemctl to disable slim and enable kdm.That won't get you graphical logins on tty8+, though.
So, how can I do it with slim?
Raynman wrote:Do you really need a GUI to kill a program?
No, I don't, it was just an example.
Sounds like your xinitrc isn't quite right, check the wiki page for slim.
I'm tired of reviewing my xinitrc in order to make slim let me choose my desktop. I think the F1 to change the session is experimental. I will open other thread in order to get some help or in order to help SLIM to solve this problem.
And you could try LightDM instead (because KDM probably pulls in some KDE crap). It comes with dm-tool (and a replacement for gdmflexiserver) to start a new session on another tty.
Sounds good. I'll try to make slim work perfectly and if I don't get it to work as perfectly I want I'll try other login managers. -
How to change from lowercase to uppercase in Pages for iPad
First: hello!
Basically I got a new iPad and I'm using Pages for some document creation but i can't find how to change the text i selected from lowercase to uppercase, in MacOSX is in the Font Menu but I can't find it in Pages anyone knows how to do this?Generally, you are more likely to get an answer if you post in the iWork for iOS forum at
https://discussions.apple.com/community/app_store/iwork_for_ios
Cheers, Tom
Maybe you are looking for
-
How can I Access itunes account on ipad without using a computer
Sorry I will qualify that seemingly dense question by adding that i do not have my computer with me at present so am having difficulty accessing my account. Through the app. i can get my music but cant manage my account.
-
"This text file is too large to edit" for a very small file
Hi all, I uploaded a small JS script file, less than 2K, into the Shared Components/Static Files. When I was trying to edit it, I got the error "this text file is too large to edit". Anybody experiences this ? Any solutions ? My Apex version is 4.2.
-
I need to download mozilla firefox version 2.0, where can I find it?
I can only find version 7, but I need 2.0.
-
Upon updating an app, an unrecognized email address pops up.
Today when trying to update an app (twitter) in the mac app store, an unrecognized email address was entered in the apple id space. When I try to change it and add my id and pass, I get error 4 and nothing will happen. other aspects of the appstore
-
COMPRESSOR 3 NOT WORKING, i just get "Unknown time remaining"
Ok, I'm running on a g5 tower with 10.4.9 OSX, it's a 2x2.66 Dual-Core Intel Xeon with 4 GB 667 Mhx DDR2 FB-DIMM. I just installed FCS 2 last week. I'm converting 24 minute quicktime files to mp2 in compressor. First 5 episodes work great. So then i