Satellite A660 - touch pad on/off and other buttons don't work
Dear People on this forum,
Recently, around 3 weeks ago i opened up my computer and i cleaned it, took the dust out because it was overheating.
around 2 weeks before I noticed that my touch pad is not working and the top buttons are not working, there is no light (wireless multimedia sound buttons) I cant turn them off/on or I either don't know how. I am not sure if the problem is because I cleaned my laptop and did not connect some wires back but I am including this detail because I don't use those buttons so I did not notice if they were on. but 2 days ago I am not sure how my wireless went off ant when I press fn+f8 (wireless) it says wireless communication switch is off, which is one of the buttons that is not working (at the top next to of/on switch including with my touch pad)
I have tried the following:
windows update
turn off computer take out all wires and battery and wait for around 30min. Then hold then on button for 30s
reinstalling the flash cards support utility, hw setup and value added pack
and finally a Toshiba out of the box recovery using the 2 product recovery cd's
I am not sure what to do next. it is either:
try something else
or is there a wire is connected to both touch pad and the buttons at the top and i should open up my laptop again and connect them.
please answer as to my next step to recovering my wireless.
Your dear member of the forums, kaujis
Message was edited by: kaujis
Please dont understand me wrong but I dont know how to help you now. Notebook disassembling is for authorized people only and if you do this on your own there is always a risk that something can be done wrong or maybe damaged.
OK I must also say that I have also disassembled my machine too but I was lucky and everything is OK as before.
I dont know how A660 looks inside but the principle is always the same and I cannot imagine you have damaged anything.
You know very well that we cannot say much about your problem. What you should do now is final functionality test and install original recovery image that you got with your notebook. Test functionality with factory settings. If the problem is still there, Im afraid you must open notebook again and check if everything is connected properly.
Last option is to contact service and ask for help.
Similar Messages
-
Satellite U400: Need Vista install order and Control buttons don't work
I bought an Satellite U400-11T model with french windows Vista.
I want to change the french Vista to hungarian Vista.
Of course I bought a legal vista HUN and downloaded the drivers etc.
I am interrested in about the install order called installation instruction like at the XP models.
My second problem is; I have already installed the new Vista HUN and the 6 easy key touch buttons don't work anymore.
Where can I switch on it or wich program must i reinstall?
Thanks
SchmidHi
The installations order for Satellite U400 should be as follow:
Windows Vista SP1
Intel(R) Chipset Module
Intel(R) Robson(Intel iMSM Driver)
Intel(R) Crestline-GM / UMA Driver or AMD M82XT /M86 Driver V8.452.2
Conexant CX20561 Audio Driver
Marvell 8040/8055 LAN Driver
Synaptics Touch Pad Driver
Alps Touch Pad Driver
Conexant Modem Driver
Netwaiting
Modem Region Select Utility
Wireless LAN Driver
Chicony Camera Software
Bluetooth Stack for Windows by Toshiba
CIR Port Driver V7.1.62.2012
TOSHIBA Value Added Package
TOSHIBA Hardware Setup Utility
TOSHIBA Supervisor Password
TOSHIBA SD Memory Utilities
Authentec AES1610 Fingerprint Utility
TOSHIBA ConfigFree
TOSHIBA WPS Library
TOSHIBA Assist
TOSHIBA Speech System
TOSHIBA Extended Tiles for Windows Mobility Center
TOSHIBA Remote Control Manager
CD/DVD Drive Acoustic Silencer V2.02.00
Toshiba HDD Protection
TOSHIBA Face Recognition
TOSHIBA TRS Driver
Broadcom
HDMI Control Manager
Please do not ask me about single tools. Install all offered stuff following this list and I hope everything will work well.
Bye -
Portege R830 - Eco and other buttons don't work after Win7 installation
After a windows 7 reinstallation, eco, presentation buttons and the one to shutdown the trackpad doesn't work, I've reinstalled all drivers, VAP and button support program.
Could someone with a R830 tell me wich programs is link in "button support" and if they're is some options indicated?
Thanks in advance!Why did you open new thread about one and the same theme?
http://forums.computers.toshiba-europe.com/forums/message.jspa?messageID=250988
Would recommend following one thread in order to avoid misunderstandings. -
IPad 2 Rotation, Sleep, and Volume Buttons Don't Work.
I have an iPad 2 running 7.1.1 (11D201) and just yesterday the sleep sleep and volume buttons don't work, and the screen won't rotate at all. I have already tried the following:
Switched the Lock Rotation/Mute settings in General
Power cycling it
Held the sleep and menu button to reset it (the button worked for that at least)
Done a network reset
Reset All Settings and restored from backup
Reset All Settings and restored from iCloud
Erase All Content and Settings and restored from backup
Erase All Content and Settings and restored from iCloud
If anyone has any OTHER suggestions besides what I've already tried, I am all ears. Thanks.Go into Recovery Mode per the instructions here. You WILL lose all of your data (game scores, etc,) but, for the most part, you can redownload apps and music without be charged again. Also, if you have IOS-7, read this.
-
Forward and back buttons don't work in Firefox but do everywhere else.
Make sure that you set those buttons to the default action in your mouse driver software (Control Panel > Mouse or specific Intellimouse driver software).
-
I rely heavily on my earphones because well... I'm lazy but they don't work. They work on my friend's iPhone who hasn't updated yet but I've updayed and the mic and volume buttons don't work. Please make a correct update!
Nope, still same problem. I did an install, didn't work. Then I completely removed my IDT driver, restarted, installed the driver, restarted, same problem.
When I troubleshoot my audio it always asks me which one to troubleshoot. It only works if I do one of the "Speakers / HP - IDT" but I don't know why it has so many devices listed with the same name.
Also, after I troubleshoot and I can hear audio, if I go to "Manage audio devices" it still shows that no audio device is installed, which is why the webinars won't work. -
Volume and brightness buttons don't work anymore
I did a complete restore from factory DVD and since then the volume and brightness buttons don't work anymore. I have an All-in-One AE1900. Anybody can help me fix this problem? Since I do not have the original keyboard anymore, I can't use the hot key combination to do it. Thanks for your help.
I've had this same problem, but when I am using "Parallels" to run windows programs on my new Macbook Air, with an external Mac LED Cinema Display, the brightness keys on the external apple keyboard do not work. Sound seems to work fine. They work fine in Mac mode.
Any solutions? -
Iphone 4S - Wifi and bluetooth buttons don't work
Wifi and bluetooth buttons don't work in my Iphone 4S. I have tried all the suggested possible solutions, but nothing seems to work. Can anybody help?
This is the only support document there is regarding the problem. If this does not help, you would need to make an appointment at the Genius Bar. http://support.apple.com/kb/TS1559
-
Satellite U500-1F5: eco and FN buttons don't work after BIOS update
Hi everyone,
I hope i can find a solution for my problems in here.
I bought a new Toshiba Satellite U500 (PSU9ME),
I am updating my laptop regularly whenever i receive alert through TEMPRO or Toshiba service center.
Last week I received an alert to updat the BIOS and i did it. since then i noticed the following problems:
1. eco utility is not working, and when i tried to uninstall it it says (BIOS unsupported)
2. the on screen funtion buttons that appear on the top of the screen when you press the Fn button does not apear anymore
3. the touchpad lock and unlock button does not work and even pressing Fn+F9 doesnot lock it
I hope u can give me an answer regarding my problems,
I already downloaded the latest updates for the eco and value added packege from toshiba site and installed them,
BUT
didnt solve any of my prob
still eco utility is not working. The msg (unsupported BIOS), appear when i run the update.
The function buttons bar on the top of the screen not working ( even after i uninstall the toshiba value package and re-install the latest one) and the touch back lock/unlock button also is not working.
I hope Toshiba can find me a solution, coz I dont have the time to go the service center
Model U500-1F5 PSU9ME00D00XAR
Windows 7 (64)
Thanx in advanceHello
At first just one comment:
*I am updating my laptop regularly whenever i receive alert through TEMPRO or Toshiba service center.*
Thats nice but definitely not necessary. When the system runs well, don't touch or change anything. Maybe sounds stupid now but I recommend you to remove TEMPRO from the system. Believe me you don't need it. I have 2 years old Satellite A300 and still original BIOS. It runs perfectly and I don't want to make risk and change anything. Since last month I have Satellite U500-1EX and will do the same. Tempro is already removed and I am happy with factory settings.
All you have done is OK but at least you can try to reinstall whole OS now using HDD recovery option (F8 at start-up) to see if everything will works well again. sorry but if this will not help I think you need BIOS downgrade to old version. -
"Archive" and "View" buttons don't work after folio update
Hi all,
I have a subscription to the professional edition and I have built a custom viewer app for Android. I have built about 10 folios and at first download all is ok, the folios are displayed without problems and the app works fine except for one issue: "Archive" button don't work, when I tap on it, near folio cover, nothing happens, the folio does not disappear from folios list.
But the serious problem occurs when I perform a folio update from Folio Producer ('Update content' from adobe dashboard DPS): both "Archive" and "View" buttons stop working, nothig happens when I tap tap on them and I am forced to uninstall and reinstall the application on tablet (.apk file) to see folio changes in my custom viewer.
This is very annoying as well as time expensive.
Tablet is Samsun Galaxy Tab SII with Android 3.2.
Any help is appreciated.To the best of my knowledge, the SII is a smartphone and not a tablet device, and the official claim is (correct me if I'm wrong) that DPS on Android is corrently tablet only.
Anyway, it seems strange to me so checked and found out that even though the DPS apps are not available when you search for them in the Play Market of a smartphone you can still force load them to the phone and run them.
I've done it on both a Samsung SIII running Android 4.0.4 and a Samsung GT-I9070 running Android 2.3.6 (I currently don't have a device running Android 3.2)
The interface is so small that it's hardly possible to use it, but it works. -
MSI GX620 the turbo and eco buttons don't work
Hi Guys!
The eco and turbo buttons don't want to work anymore.When this problem appeared,I have had an other.When I push the button of camera, wireless or bluetuth,it dosen't appear a sign in the right corner of the monitor...I have windows Vista.What should I do?Should I reinstall the system?
Thank you for the answer in advanced...You removed SCM from your system, install it again.
-
My ipod touch fourth generation keyboard and unlock button are not working
my ipod touch fourth generation was working at one moment and then when i went to unlock the screen and type in the passcode it would not let me swype the unlock button and when i turned it off and back on again and the passcode section popped up it would only let me type the 1, 2, and 3 buttons and now it is not letting me type at all. What do i need to do? The screen is also cracked but when i cracked the screen i was still able to see what i was doing and still able to use the ipod but this was before the keyboard and unlock button stopped working, I dont know if the screen being cracked would have anything to do with the keyboard and unlock button not working. PLEASE HELP ME
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order. Could be the crack progressed to the point thtt portions of the screen no longer respond to touch
Apple Retail Store - Genius Bar
Apple will exchange your iPod for a refurbished one for $199 for 64 GB 4G and $99 for the other 4Gs. They do not fix yours.
Apple - iPod Repair price
A third-party place like the following maybe less. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
Replace the screen yourself if you are up to it
iPod Touch Repair – iFixit -
My iPod touch's lock/hold and volume buttons do not work, my WiFi also does
My iPod has done this for quite a while and the hold button and volume button (no matter how hard or long pressed) does not work. When I go to settings and look at the WiFi button it won't even let me touch it and it says "No WiFi" even when there is. My warranty has run out though and I don't want to have to pay a lot to repair it. Any help?
I would first try resetting your iPod:
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
Next would be restoring it from backup via iTunes in your computer. -
On/off Button and brightness buttons don't work in the Apple Cinema Display
I write you because I bought a new apple cinema display 20" a month ago and I have problems with the on and off button and the brightness buttons. Thew work sometimes. I think that te problem is windows XP but I am not sure. My graphics card is a ATI RADEON X800 GT Gecube 256 Mb DDR2.
Would yo mind telling me how can repair that? If I need something to repair o it is better to buy the new windows to avoid that problem.
Windows XP Pro ATI Radeon X800GT Gecube 256 Mb DDR2Thank you very much. I didn't know this driver.
But the problem was when I was installing this driver, Windows said that it's imcompatible with windows XP.Is this normal? o I need to download a special edition for windows xp. -
Ipod shut off and home button does not work
So my friends iPod shut off and her home button doesn't work, and if plugged in wont turn on either? We tried the alcohol method but it did not work, anyone have any suggestions on what to do. ( her warranty is also expired)
Try:
- iOS: Not responding or does not turn on
Ignore the reset and when it says place the iPod in recovery mode
Place the iPod in recovery mode using one of these programs:
For PC
RecBoot: Easy Way to Put iPhone into Recovery Mode
or
http://joshuabailey1997.wordpress.com/2010/09/02/recboot-v1-3/
If necessary:
Download QTMLClient.dll & iTunesMobileDevice.dll for RecBoot
and
RecBoot tip
RecBoot may have problems on 64X windows, then try:
Tenorshare ReiBoot – Enter & Exit iPhone, iPad, iPod Recovery Mode with a Single Click
For MAC or PC
The Firmware Umbrella - TinyUmbrella
Installs blootware on PC too
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
Maybe you are looking for
-
0_FI_AR_4 Modeling question
Hi , How does one model a solution in BW for getting a correct historical update of open and closed items from 0fi_ar_4. Imagine that the data is staged upward from write optimized dso to a std. dso and going up the cube. Now at the datamart level,
-
i have no idea how to fix this. any help would be greatly appreciated
-
Bineary search, how to use it
Binary Search P4.1 Write a program that implements a "guess the letter" game. That is, generate a random char between 'A' and 'Z'. Then give the user up to ten guesses. After each guess, display a "Too Low", "Too High" or "Got it!" message in respons
-
Generating a Book from DITA Map
Hi All, In the DITA-FMx plugin developed by Leximation, there's a feature called Generate Book from Map. It allows me to create a FrameMaker book from a DITA map or bookmap and then do whatever I can do with any FrameMaker book, including create a PD
-
Issue when calling an external web service - CRM 2013
Hello everyone. This is my scenario: I'm doing a real time data integration from CRM to another software. I deployed several plugins, mostly in create/update messages, for the entities i want to sync. The developers of the other software gave me the