Satellite A70-S249: How to change the video memory from 64 to 128MB

ai all
i have a A70-S249
in user guide it say that i can adujst tha vedio memory
64MB ATI MOBILITY Radeon IGB 9000\9100 to 128MB
but thy didn't say how can i do it.
so can any one tell me how to do it?
(my bios is phonex 1.5)
thanx

You should use the Toshiba graphic drivers.
The different drivers you can use at the own risk.
The Toshiba driver supports an overheating protection. You should know that the notebook graphic cards are not the same like on the desktop PCs. There have no own cooling module. In this case the Toshiba graphic driver controls the performance of the card and decreases the performance if the temperature increases to the critical level.

Similar Messages

Help! How to change the video frame size during RTP transmission

Hi there.
In a RTP transmission:
How can I change the size of the frames of the video while I have the processor in the server running?
i.e. while the server is running, i want to change a video from 400x200 to 200x100
Thanks

I am trying to implement the same functionality. I've tried to reset the format using the trackControl.setFormat method but this only appears to be supported while the processor is in a configured state. I'm still investigating, but if you happen to know a solution please let me know.
Here is what I'm trying to do... In the middle of a session, I'm trying to change the video format from h263/rtp:352x288 to h263/rtp:176x144

How to change the Unitprice value from 2 decimals to 3 decimals in script

Hi Gurus,
how to change the Unitprice value from two decimals to three decimals for each item level for PO in script.
Please provide some possible solutions.
Thanks,
V.V.

Hi,
Check the options available like
&VAR(.2)& this will print 2 decimals
&VAR(.3)& this will print 3 decimals
need to change the value for how many decimals you need
Thanks & Regards
Sarves Sombhatla

How to change the file type from IMOVIE PROJECT to other types of file

how to change the file type from IMOVIE PROJECT to other types of file??
thank you very much for your help=]

I am not sure what you mean, but once you make a project. Then go to the share menu and you can export the project to iDVD, itunes, mobileme, quicktime.
Share export quicktime movie will allow you to export to a variety of codecs. What specific export are you looking to share the movie in? What is the final source that the movie will be displayed?

How to Change the Development Class from $TMP to YABAP in Layout

Hi all,
How to Change the Development Class from $TMP to YABAP in Layout( SE71).
Thanks & Regards,
N.L.Narayana

Hi,
it is possible with SE03. you just click on Change <b>Object Directory Entries</b> under the tree menu <b>Object directory</b>, and then enter in the last column of table control
Check the check box and enter FORM and formname,
R3TR FORM SAPscript form
then execute it.
then you will be able to change it to PACKAGE from $TMP
regards
vijay

How to change the Character Set from AL32UTF8 to WE8DEC

Hello!!
I want to know how to change the character set in the database from AL32UTF8 to WE8DEC.
I tried to use the comand ALTER DATABASE CHARACTER SET but I got an error because WE8DEC is not a superset of AL32UTF8.
I need to import tables from a server that uses WE8DEC. So when I do the import to my server, wich has AL32UTF8 , I can't import the rows that include an Ñ.
So I want to change the caracter set to WE8DEC. How can I do it?
Is it needed to change the language configuration? The remote server has AMERICAN_AMERICA, and my server has MEXICAN SPANISH_MEXICO (both uses text in spanish).
Thanks a lot!!

When you export from WE8DEC server what did you use
for NLS_LANG char set? And when importing?
The export was done in another computer because I can't do the export in the server (I have 10g, and the remote server has 9i and the export is not working). In my server, when I tried to do the import, the NS_LANG value was MEXICAN SPANISH_MEXICO.WE8MSWIN1252.
When I try to import to my database I got the error:
import done in WE8DEC character set and AL16UTF16 NCHAR character set
import server uses AL32UTF8 character set (possible charset conversion)
export client uses WE8MSWIN1252 character set (possible charset conversion)
. importing USRMCR06's objects into PRIMARIZACION
. . importing table "CHG_FONDOS_MARZO_CD_MOR"
IMP-00019: row rejected due to ORACLE error 12899
IMP-00003: ORACLE error 12899 encountered
ORA-12899: value too large for column "PRIMARIZACION"."CHG_FONDOS_MARZO_CD_MOR".
"NOMBRE" (actual: 41, maximum: 40)
Column 1 16623436
Column 2
Column 3 Pymes_1
Column 4

How to change the IDOC Status from 30 to 03

Hi Friends,
In the Partner Profiles Collect IDOCS option is Selected and the Output mode is 4.
In my Custom Program i am Using the Function Module MASTER_IDOC_DISTRIBUTE to generate the IDOCs
I am getting the IDOCs of Status 30.
then in my Custom Program, I am Submitting the IDOCs to RSEOUT00 program.
to change the IDOC status from 30 to 03.
SUBMIT rseout00 USING SELECTION-SCREEN '1000'
               WITH docnum IN gt_range_idocs
               WITH p_compl EQ 'Y'
               AND RETURN.
but still i am not getting the IDOCs of changed status.
I need to get the Changed IDOC status and if the IDOC status is not changed then I need to generate an Error file for the IDOCs data and send that data to customers as a mail.
so my requirment is to call the RSEOUT00 in the Custom Program and Change the IDOCs Status to 03.
When i am Executing the RSEOUT00 Indidually by giving the IDOCs numbers, then the IDOCs Status is going to change to 03 from 30.
Kindly Guide me how to proceed furthur
Thanks in Advance,
Ganesh

Thanks Shrishit,
RC1_IDOC_SET_STATUS changing the Status from 30 to 03.
Its fine, But my Question is will IDOC Data will be reached to XI Server or not.??
means is the functionality of this Program is same as the RSEOUT00.
MY job is to change Status from 30 to 03 only
and then Check the Status of those IDOCs, and if the IDOC is not sended to XI i.e.;03 status, then I need to send the Details of IDOC (i.e.; data in filed IDOC) to Customer Mail ID through an Attachement.
I hope you Understood my AIM, why I need to change the Status in my Custom Program only, by submitting IDOCs to this report .
Kindly waiting for your reply,
Thanks in Advance,
Ganesh

Using Oracle 11g How to change the Log mode from NoArchieve to Archieve Log

Hi,
I currently using oracle 11g How can I change database from NoArchivelog node to Archivelog node using spfile.
And where exactly the spfile will be located?
My instance is EPM11 in my local oracle is present in D folder where can i found the pfile?
In this path i found 1 pfile in my Local Machine
"D:/Oracle/Product/11g/admin/epm11/pfile" .I have added the following commands in this pfile
# Archive Log Destinations -benr(10/15/04)
log_archive_dest_1='location=/u02/oradata/cuddle/archive'
log_archive_start=TRUE
Then i have ran the shutdown command.
Database instance is showtdown.
After that i am not able to perform startup.
So please suggest me how to change the mode using SPfile and tell me the path where spfile and pfile should be located?
And also do i need to set the "Oracle_Home" path in my environment variables"
Thanks In Advance,
Chandana

user11225122 wrote:
Hi,
I currently using oracle 11g How can I change database from NoArchivelog node to Archivelog node using spfile.
And where exactly the spfile will be located?
My instance is EPM11 in my local oracle is present in D folder where can i found the pfile?
In this path i found 1 pfile in my Local Machine
"D:/Oracle/Product/11g/admin/epm11/pfile" .I have added the following commands in this pfile
# Archive Log Destinations -benr(10/15/04)
log_archive_dest_1='location=/u02/oradata/cuddle/archive'
log_archive_start=TRUE
Then i have ran the shutdown command.
Database instance is showtdown.
After that i am not able to perform startup.
So please suggest me how to change the mode using SPfile and tell me the path where spfile and pfile should be located?
And also do i need to set the "Oracle_Home" path in my environment variables"
Thanks In Advance,
Chandanaremove log_archive_start=TRUE from pfile (it is depricated from 10g onwards)
SQL>startup nomount pfile="D:/Oracle/Product/11g/admin/epm11/pfile/initYOUR_SID_NAME.ora"
SQL>Create spfile from pfile="D:/Oracle/Product/11g/admin/epm11/pfile/initYOUR_SID_NAME.ora"
SQL>SHUT IMMEDIATE;
SQL>STARTUP MOUNT
SQL>ALTER DATABASE ARCHIVELOG;
SQL>ALTER DATABASE OPEN;
SQL>ARCHIVE LOG LIST;
SQL>SHOW PARAMATER SPFILE;
YOU WILL FIND THE LOCATION OF SPFILE
SQL>

How to change the library path from development machine to application serv

hi
how can i change the library path which i developed in windows machine and the library path is c:/fas/dss.pll and now i hosted all forms,menu,library and reports in application server that is running in linux machine now i want to know how to change the library path c:\fas\dss.pll to /oracle/fas/dss.pll.

Hi !
It is standard functionality to change ship-to party address in ISA B2C. This happens only from the checkout.inc.jsp. The ship-to party is part of the basket object.
Cheers,
Ashok.

How to change the page color from white to gray in Indesign?

While working on a document, the white pages (not pasteboard) appears too much bright to eyes. Is there any way to change the pages color from white to medium gray at display level only i.e. that gray should not appear while printing the document pages?
Thanks,

You haven't told us what version of InDesign or what operating system.
If you have InDesign CC, you can change the color of the panels (Preferences > Interface). If you turn on Match Pasteboard Color in the same preference, you can make the pasteboard darker.
However, to change the color of the page, you need to change your monitor brightness. On a Mac, that would be System Preferences > Displays and drag the brightness slider to the left.

How to change the SOAP version from 1.0 to 1.2 while registering to ESB

Hi All,
I have problem here,
Is there any possibility to change the soap version from 1.0 to 1.2 for oracle ESB.
Because it is using SOAP1.1 while registering any service to ESB, Is there any possiblity to change it.
Hi guys is there any solution for this...........:-(
OR Will SOA suite 10.1.3.4 supports SOAP 1.2 ?
Cheers,
Kalyan.P

Hi,
The current version of ESB does not support SOAP 1.2. You need to make sure your message contains the correct SOAP 1.1 namespace so ESB uses the correct SOAP version:
SOAP 1.1: http://schemas.xmlsoap.org/soap/envelope/
SOAP 1.2: http://www.w3.org/2003/05/soap-envelope
For SOAP 1.2 you have to wait until 11g SOA Suite is released.
Kind Regards,
Andre Jochems

Satellite M30 Pro: how to change the optical drive?

Hi there,
could anybody please give me a hand on changing/replacing the optical drive on my Satellite Pro M30?
Alas, my drive is a DVD-ROM/CD-RW. I have another one with the capability of burning DVD's (Super-Multi drive from Matsu****a). I just wonder how I could replace them, since it os not possible to easily slide them out?
Thank you.
Jan

Hi
To remove the optical drive you need only to remove 2 screws which are placed at the bottom of the unit on the drive side. Then you can simply slide outward the drive to disconnect it from the connector on the system board.
The drive is placed in the plastic frame. So you need also this frame for a new drive.
To remove the plastic frame from the device you have to remove 4 screws.
Bye

How to change the Video Background Color - The Answer...Not the Question.

Hello All,
I was struggling with the Video Background Color as I was setting up my DVD. I'm new to DVD Studio Pro. I couldn't get the color to change from grey to the desired black. I was moments from asking for help, but thought to try just a bit harder. The answer lies under Preferences, Menu, Video Background Color. Just thought I'd share for future search strings by others.
Ahh, onward!
DG

The id is applied by (I think) the skin class of the ChoiceBox. You don't need to define it.
You have to apply the css in an external style sheet. You can apply the external style sheet to any parent of your choice box, or to the scene (the most usual way to do it).
Example:
import java.util.ArrayList;
import java.util.List;
import javafx.application.Application;
import javafx.scene.Scene;
import javafx.scene.control.ChoiceBox;
import javafx.scene.layout.VBox;
import javafx.stage.Stage;
public class ChoiceBoxTest extends Application {
@Override
public void start(Stage primaryStage) throws Exception {
    primaryStage.setTitle("Example 2");
    final ChoiceBox<String> choiceBox = new ChoiceBox<>();
    List<String> tempResult = new ArrayList<String>();
    for (int i = 0; i < 10; i++) {
      tempResult.add("Item " + i);
    choiceBox.getItems().setAll(tempResult);
    VBox root = new VBox();
    root.getChildren().add(choiceBox);
    final Scene scene = new Scene(root, 300, 250);
    scene.getStylesheets().add("choiceBox.css");
    primaryStage.setScene(scene);
    primaryStage.show();
public static void main(String[] args) {
    launch(args);
choiceBox.css:
@CHARSET "UTF-8";
#choice-box-menu-item:focused {
-fx-background-color: yellow ;
#choice-box-menu-item .label {
-fx-text-fill: black ;
Message was edited by: James_D

Satellite A500-138 - How to change the fan speed?

Hi,
I have a question how to I can change speed fan on my A500?
I mean with BIOS change power, I dont have advanced option on my BIOS so I cant change that... Any ideas?

Hi buddy,
You can change the speed fan in Windows Power Management. Therefore Toshiba Value Added Package must be installed but its already installed if you use the preinstalled Windows from Toshiba.
Open the Power Options: Start => Control Panel => Mobile PC => Power Options
Click on Change plan settings and in advanced settings you should see the option Cooling Method. There you can change between 2 different modes.
Check this!!!

Satellite L40-143 - How to Change the Language of Vista?

Hello all,
I bought a L40-143 Toshiba Laptop. The vista version is a German Version.
I tried to reinstall with recover CD, but then there is no use of it.
Can any body help me for changing the language?

As far as I know notebooks are country specific products and it is logic that notebook in Germany will be preinstalled with German language. If you need OS on different language you must buy country specific Microsoft installations DVD. You can order it over the Internet.

Satellite A70-S249: How to change the video memory from 64 to 128MB

Similar Messages

Maybe you are looking for