Satellite C50-A-1DV - Cannot boot from USB

Satellite C50-A-1DV PSCG6E-08P01CEN
I could previously boot from USB by selecting Secure boot to off and CSM boot in the system bios. Since I have upgraded my bios from 1.3 to 1.4 I can't seem to boot from a USB drive. I can boot from the CD but not USB.
Any Ideas?
Booji

hello
if you want install os in laptop then you should have to change the boot mode in BIOS menu.
for win 7 select the CSM boot mode
for win 8 select the UEFI boot mode
then boot by the pen drive and also CD/DVD.
Restart the system and hold the F2 key then you get your BIOS setup
if not get the BIOS setup by the process then you should tried power drainage.
Power Drainage process: just remove the battery and adapter of the laptop then hold the power key for 30 sec
after that connect adapter of the laptop then turn on system.
Try it...:)

Similar Messages

  • Re: Satellite NB10T-A-101 - cannot boot from USB stick

    Hello,
    I bought a new Toshiba Satellite NB10T-A-101 and would like to boost performance by changing the HDD by a SSD and install windows 8.1 Pro.
    I'm however unable to boot from USB, it always mention:
    +Reboot and select proper Boot Device or insert boot media in selected boot device and press a key.+
    I already disabled secure boot, used 5+ different usb sticks (work all fine on other laptops).
    Can you please tell me what the approach is to change the HDD and then boot from a bootable (UEFI) usb stick.
    Thank you.

    Hi
    The notebook Satellite NB10T-A-101 was equipped with an Intel N2810 CPU which is part of the new Intel Bay Trail-M platform.
    This new Intel Bay Trail technology allows the installation of UEFI capable systems:
    Win 8 or Win 8.1
    Just few questions:
    Did you already change the HDD to SSD drive?
    If yes, is the new SSD drive recognized in the BIOS?
    Did you try to boot from this Win 8.1 USB flash memory stick before you switched to SSD drive?

  • Satellite U925t cannot boot from USB

    Hi
    I cannot boot from USB flash drive on Satellite U925t. I use bootable USB flash drive inserted (Hiren Boot 15.2, sure booted on another laptop), restart the system. When the splash screen is displayed, press F12 to access the boot menu, selecting USB - but laptop no boot from USB.
    Please, Help me.
    Thank you very much

    From within Windows, try holding SHIFT when you select Shut down. Is there any change then?
    Also, try entering the UEFI settings, disabling Secure Boot, and changing UEFI to CSM.
    - Peter

  • Can i try archlinux on usb if my pc cannot boot from usb?

    it seems my old pc cannot boot from usb, only boot from hd or cd.
    can i use usb? or i have to burn a cd?

    If you have a floppy disk you can put the PLoP bootmanager on it:
    http://www.plop.at/en/bootmanagerdl.html
    This bootmanager has USB support and can boot from an usb stick even though your bios does not support it.
    You can also burn PLoP on a CD. This is good if you want to burn only one generic CD and then be able to boot any usb stick instead of burning one cd for each OS you want to boot.

  • Hello.. my hp dv6748us cannot boot from usb nor external harddrive.​. may harddisk is already broken

    hello.. my hp dv6748us cannot boot from usb nor external harddrive.. may harddisk is already broken so i bought i new one. my internal dvd drive doesnt work also.. can anyone help pls.. thnks

    Is USB boot enabled in the bios, it should be able to boot from USB.
    Other than that you will need a working DVD drive.

  • T61 cannot boot from USB harddrive

    My T61 cannot boot from USB harddrive. the drive have VID 058F and PID 6391, the drive is bootable on all other computers. What happened? The bios does not recognize the drive at all.

    cwang36, welcome to the forum,
    I've had some strange experiences with usb hard drives and would ask you to try the following;  when you want to boot from the drive start your T61, go into the BIOS > Startup > Boot menu and you should see the option USB HDD with a "-" in front of it. If I am correct you should exit BIOS, (F10 save and exit), upon restarting enter BIOS again and go again to the Boot menu. This time the USB HDD entry should have a "+" infront of it showing that the drive has been properly recognised.
    If my theory is correct, no guarantees, you can then exit Bios with F10 and hopefully boot from the drive.
    Hope this helps.
    Andy  ______________________________________
    Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
    Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
      Deutsche Community     Comunidad en Español    English Community Русскоязычное Сообщество
    PepperonI blog 

  • Satellite A100 PSAA8E: Cannot boot from USB after Bios update

    Hi
    I downloaded the latest bios (v6) for my satellite a100 (psaa8e) and after updating the old bios, I noticed I can't boot from USB. Is there a way to restore the old bios or will this problem be solved?
    Cheers
    mo

    I used to press F12 after restart and choose from USB. After downloading the bios, the system refuses to boot from the USB (external CD drive). However, if I place the same CD into the unit's CD drive, and choose boot from CD after pressing F12, the unit boots fine. This only happened after the bios update.
    Thanx
    Mo

  • My Satellite C50-B won't boot from HDD

    Machine Details:-
    Model Number: PSCMLA-03F07Q
    Serial Number: XE343127P
    Computer won't boot from harddrive. No error messages, just Toshiba splash screen at end of self test.
    A couple of times a reinstall of the operating system seemed to correct the problem but then it would go again, now the problem is consistent.
    I've narrowed down possibilities to a BIOS fault, reasons-
    System boots from USB without any problems. Installing of operating systems proceeds with no errors. Harddrive SMART data reports a perfectly healthy harddrive. Memcheck returns no errors.
    The obvious solution is to reload the BIOS, just resetting it achieves nothing. But here's the problem.
    The updated BIOS 1.4 that the Australian website offers is a Windows program and the computer can't boot Windows.
    Obvious answer is to use a bootable USB stick with a "live" operating system on it but all of these systems are Linux and the BIOS update is a Windows program. So much for intelligent solutions.
    Downloaded Bios version 1.7 from European site but the iso inside that rar file is empty, 25 Mb in size but nothing in it according to Linux. Tried running it's program on a Win7 64bit computer and it returns an error that it could not find the correct iso file.
    I've submitted a support request by email to Toshiba but they reckon it could take 3 days to get a reply so I thought I'd ask here as well. Can anyone please point me to a working copy of the latest BIOS update disk for a Satelite C50-B laptop? Please note - this model doesn't have a CD drive so the iso must be compatable with USB boot.
    Cheers,
    Andrew.

    OK, found the answer.
    Bios was corrupted but not critically so, turns out that this laptop should never have been able to boot linux in the first place. It's only because of the corrupted bios that I got away with it a few times. Ended up getting a valid copy from a blog in Russia.
    Toshiba used to be a byword for quality in the computer world but this is definately no longer the case due to poor (cheap) new quality control practices. Also it seems that Toshiba is no longer really concerned with making computers, they're more interested in selling Windows and GE Insurance Policies disguised as extended warrantees.
    From now on I will definately be making sure that my customers understand the troubles they can have when buying Toshiba Laptops.
    As for running Linux, I'm including this so that it will help other poor unfortunates who thought they were buying a computer instead of just a Windows platform.
    The problem started with Microsoft, their proprietry MBR boot system was no longer valid in a modern world and they had to adopt the open source GPT partitioning system with UEFI boot, but in typical Microsoft fashion they couldn't stick to the widely accepted standard conventions for how the EFI boot partition should be laid out. And Toshiba is Microsoft's new "friend with benefits" so instead of sending Microsoft back to the drawing board they've rewritten their bios so that it looks for the Microsoft Win8.1 EFI boot partition and ignores all others.
    The quick answer is to edit your boot partition after install and make it look like Microsoft's. Please note that you don't have to do this with other brands of computer, only Toshiba.
    Here's a link with full instructions including pictures, it's written for Ubuntu but is easily adapted to almost any other operating system.
    http://linuxontoshiba.blogspot.de/2014/05/getting-ubuntu-1404-to-boot-from.html?showComment=1410953307121
    Hope that helps a few people before it gets deleted.
    Cheers,
    Andrew.

  • W541: Cannot boot from USB created with Windows 8 create recovery drive

    Hello, I have just bought a W541, and want to install the supplied Windows 8 on an m.2 SSD.I created the recovery drive on a USB following the instructions in the User Manual, but the recover image procedure under Advanced Options cannot find the USB.During the re-image step, it fails to find a drive with a valid image.I've confirmed using the command window available under the Advanced Options that the USB is mounted Searching these forums, I found the following, which describes a similar problem for a T540:https://forums.lenovo.com/t5/ThinkPad-W-Series-Laptops/Lenovo-W540-won-t-boot-from-USB-flash-drive-ThinkPad/m-p/1500902#M39097 This implies that the USB should first be formatted with FAT32 before use, which cannot work, since FAT32 only has a maximum 4 GB  partition, whereas when copied to the USB, the Windows 8 recovery drive occupies nearly 10 GB. Is it possible to specify the boot order from insde the BIOS? I could only find an entry under Security about UEFI boot enabling, nothing about the boot order. Can anyone help?Paul    

    Hello Z, thanks for the reply. I tried another USB drive, and created a recovery drive, as before.This time it was able to detect the presence of the drive when I tapped on the Enter key when starting up, followed by the F12 key.  However, there are still problems when I clicked through the options:Choose the languageChoose your keyboard layoutTroubleshootAdvanced optionsSystem Image Recovery At this point I am offered the option Windows 8.1.When I select this, it indicates it is scanning for system disks, and then displays the the pop-up window "Re-image your computer": "Windows cannot find a system image on this computer" Why does this happen if it detected that there was a Windows 8.1 installation on the USB? I've spent a whole day now on this. Luckily, if I can't solve it, the machine is new and I can send it back to Lenovo, and ask to have it re-imaged with the downgrade option to Windows 7.

  • T520 cannot boot from USB?

    I just got the latest T520-4242
    I want to use a kind of system installation or maintainance tool in a USB flash driver to boot my laptop.
    The USB flash disk is a SanDisk Cruze 8G, but when I enter F12 at the beginning of the boot period, the menu of the boot option cannot recognize this flash disk. I've tried several computers to boot from this usb disk, they all booted well.
    I have another USB flash disk SanDisk 8G, it can be recognized during the boot menu option. So it's very weird.

    hey icenimbus,
    now that is strange since a different flash disk of the same brand and size could be recognized.
    is both of them "cruze" or different? have you tried with different USB ports ?
    if it is possible, load up your unit and get into the bios and set it to boot from USB only . See if this makes and difference and do try with a lower capacity flash drive.
    WW Social Media
    Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
    Follow @LenovoForums on Twitter!
    Have you checked out the Community Knowledgebase yet?!
    How to send a private message? --> Check out this article.

  • Cannot boot from USB HD on T61 & T61P Why not?

    Have bootable WD and Hitachi HDs in external USB enclosures.  Have successfully cloned one of these WD) using Acronis.  When trying to boot from the USB attached drive using PF12 and selecting the recognized drive on the boot menu get either BSOD or message unable to boot operating system.  What gives?  Know the WD will boot internally as it was the disk that came with the system.  Get the BSOD with this disk in USB port.
    Hitachi give me the unable to boot operating system message when trying to boot from USB drive.
    Using a TrekStor HD enclosure pn D260U20P10-3 which works fine if I boot the internal HD.  Can copy and even backup internal drive to external HD but can not boot from it. 

    Hello,
    As I understand it, Microsoft Windows 7 and earlier operating systems do not support booting natively from a USB Mass Storage Controller interface.  The installers do from things like USB-attached optical disc drives and flash drives, but that's not the full operating system.
    Support for booting from USB in the main operating system environment might be introduced in Windows 8—I thought I read something about this, but cannot seem to find a reference right now.
    Regards,
    Aryeh Goretsky
    I am a volunteer and neither a Lenovo nor a Microsoft employee. • Dexter is a good dog • Dexter je dobrý pes
    S230u (3347-4HU) • X220 (4286-CTO) • W510 (4318-CTO) • W530 (2441-4R3) • X100e (3508-CTO) • X120e (0596-CTO) • T61p (6459-CTO) • T43p (2678-H7U) • T42 (2378-R4U) • T23 (2648-LU7)
      Deutsche Community   Comunidad en Español Русскоязычное Сообщество

  • Cannot boot from USB-DVD on HP Envy 13

    Even when the USB DVD drive is selected as the primary boot device or selected as boot device after pressing ESC and F9, I cannot boot from DVD.
    According to another post I have:
    http://h30434.www3.hp.com/t5/Notebook-Operating-Systems-e-g-Windows-8-and-Software/Boot-problem-but-...
    I have problems booting from HDD as well, and now I also have problems booting from DVD. I have tried 3 different bootable DVDs.
    Does anyone have any ideas to how the booting process could be corrupted any further and how I can regain the boot-from-DVD function? Now I cannot even run the recover DVD and recover the PCs factory settings.
    However, I can still boot from HDD following the description from the other posting.
    Thanks with best regards

    Could you please give me the exact product number for your notebook?
    If you need help finding it, you can use the following link:
    http://h10025.www1.hp.com/ewfrf/wc/findModel?cc=us&dlc=en&lc=en
    Thanks,
    Kyle
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

  • 10-K010CA laptop cannot boot from USB

    I try everything ( update BIOS, disable securiy boot, setup usb boot first ).  But the laptop will not boot any other USB disk except the Recovery USB Disk create by the laptop.
    I had a few USB Disk ( windows 7,  linux ) which boot normally on HP Desktop PC which set to boot UEFI  but will not boot from this laptop.
    Will this laptop able to boot from USB Disk at all?

    Hi there @azure-cheng 
    Welcome to the HP Support Forums! It is a great place to find the help you need, both from other users, HP experts and other support personnel.
    I understand that you are trying to boot from media that will work on your desktop. I am happy to help with this.
    Please post the full product number for your notebook. See the following, if you need help with that information.
    How Do I Find My Model Number or Product Number?
    Are all of these bootable media UEFI, or is there a mix, of UEFI and legacy?
    Have you tried setting your notebook to legacy boot?
    Malygris1
    I work on behalf of HP
    Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
    Click Kudos Thumbs Up on the right to say “Thanks” for helping!

  • Toshiba NB520 - cannot boot from USB

    I have NB520, i tried any possible ways to boot from usb and it still doesn't work.
    I need some suggestions.
    Thank you.

    Originally Posted by Liam
    Do you try to use recovery USB media or some other bootable USB content?
    When you start-up your device press F12 to enter boot menu. Choose USB option and press ENTER.
    This should work.
    I've tried to install windows 7 from my flash drive, when I press F12 in the boot menu only shows usb, but I don't see my device name for usb.
    It's like this:
    Boot Menu
    USB (empty no device name)
    HDD [device name]
    LAN [device name]
    It should be like this:
    Boot Menu
    USB [device name]
    HDD [device name]
    LAN [device name]

  • Cannot boot from USB/dvd-drive on Satellite Pro M10

    Hi,
    since the internal dvd-drive is broken, an external USB drive is used. Now, I need to reinstall windows on a new harddrive. How can I boot from this external drive? (I do have a Floppy disk drive, but I cannot find the right drivers)
    Thanks,
    Luc

    Hi,
    you dont need any drivers for that USB-drive because the USB-floppy is a integrated peripheral of your computer. That means, everytime you connect the floppy to your machine, the computer sets that floppy like a internal hardwired floppy and thats the reason you wont need any drivers.
    Its already installed when you plug it in.
    Cheers

Maybe you are looking for