Satellite C50-A CMOS password Reset

i have Satellite C50-A laptop and it was automaticaly loked on system startup & asking the cmos password.p/s guide me how to reset this password by steps.(i was tried ro remove cmos battery for 30~40 min but it is not working for me.)
i have harware thechnision knoladge & i can manage with instructions.
thanks

I'm sorry, but you'll have to have it professionally serviced.
- Peter

Similar Messages

Cmos password Reset

hello i forgot my laptop's cmos password and i cant seem to reset it by disassembling the laptop, could someone please help me, i got error
Fatal Error... System Halted.
CNU91508HD
This question was solved.
View Solution.

Hi,
Try entering: e9lo3q1uzt ( 3rd character is a lower case L )
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

CMOS password reset for compaq presario CQ60

My sons compaq presario CQ60 will not power up goes straight to cmos password request not care about data on PC would like to change OS to LINUX. Tried entering password three times shut out with code 13708 can you help me reset so I can get my sons PC up and running again thank you in advance please send any help to email address as well please
This question was solved.
View Solution.

Hi,
Enter:      nkhtrc
                       or
                  xjpfgn
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Re: How to clear Toshiba satellite model PS271L-6K906 CMOS PASSWORD?

TO: Toshiba
How to clear Toshiba Satellite model PS271L-6K906 CMOS PASSWORD?
Please Reply to my E-mail Address......[email protected]
Thank You

TO: King
http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=127837
read this thread very carefully!

My Toshiba satellite a215 cmos password

Pls can u tell me the default cmos password my computer just went off and since then it has been requesting for password which I be not used before I can assess my computer my doc everything on my computer kindly help me pls

There is no default password.
Qosmio X875 i7-3630QM, 32GB RAM, OCZ SSD Qosmio X505 i7-920XM, PM55, 16GB RAM, OCZ SSD
Satellite Pro L350 T9900, GM45, 8GB RAM , Intel 320 SSD (my baby) Satellite L655 i7-620M, HM55, 8GB RAM, Intel 710 SSD (travel system)

How to reset my cmos password for probook 4310s

how to reset my cmos password for probook 4310s p/n vc161ea#ar2

Reset Password using Recovery HD
OS X 10.7 Lion /10.8 Mountain Lion
Follow the instructions in the first and third boxes.
http://pondini.org/OSX/Password.html

Satellite C50-A133 - language bar hot keys keep being reset automatically

Hi!
I have a Toshiba Satellite C50-A133 notebook with Windows 8.1 64 bit (system language English UK) from the UK. So far I have not had major problems with Windows 8.1 but one annoying problem keeps coming up.
There are currently 12 languages/input methods installed, some of which I have assigned keyboard shortcuts, either Ctrl + number or Ctrl + Shift + number.
After the system starts up they work fine, but after a while become disabled without me being aware of having done anything to disable them. The only thing I can do is open the Language Preferences menu and assign the shortcuts again.
They have disappeared in the language bar hot keys menu, specifically each shortcut I have set has changed to "None". This happens after a while no matter what I use the computer for.
Restarting the system always resets the shortcuts to my settings but working with the computer for a while disables them. I use Avast, Malwarebytes, Auslogics BoostSpeed and Windows Defender regularly, as well as CCleaner at startup. I don't think it's any of these causing the problem, as it occurs when none of them are scanning as well. Using the Windows key + tab bar to change input language works fine by the way.
All the languages are displayed and can be activated this way. It is just the hotkeys that keep disappearing. It is not a huge problem but can be inconvenient when needing to switch between 2 or 3 languages quickly without having to cycle through all 12 of them. Has anyone had this problem and is there a way to fix it?
I have already explained this issue to Microsoft.
They had no solution that worked and suggested it was a hardware problem and that I should contact Toshiba instead.
Thanks!

To be honest Im not sure if I understand your problem correctly but as far as I know by first start after notebook purchase you can define keyboard input language and thats it. Of course you can change it additionally and add some other input languages.
For me it sounds crazy that 12 languages are offered as installed services. Who has done this?
Can you please tell us how all this started? I mean I presume you use UK layout only and English as input language. The issue with 12 languages sounds completely crazy for me. Have you tried to change anything? Have you tried to remove all other languages?
Hardware problem? I don't know what Microsoft think about this but there is a easy way to check this. Reinstall original recovery image and check how it works with factory settings.

Satellite C50-A-19T - display very faint

Hi I have a Toshiba Satellite C50-A-19T running windows 8 and lately the display is almost non-existent.
When I start the machine up, I can just about see the Toshiba Logo and that's about it - even it's hard to see.
What I have tried:
1) External Monitor - External display works fine (connected via VGA).
2) I've tried the Fn/F4 button to chang which display, tried a few settings and still nothing on Laptop Screen
3) I've obviously checked the brightness, it's almost max.
4) I've removed battery and power, left laptop off for a while, then tried powering back up with battery still out - nothing different.
5) I've googled like mad and tried removing battery & power, holding power button down for 60+ seconds, done this 5-10 times in all, still nothing when I power it back on
6) I've replaced the screen with one from another similar toshiba that I know is working - it acts exactly the same.
Is there anything else I'm missing here?
The laptop is working like a dream when plugged into an external monitor.....and I've removed and reloaded all display drivers, reset CMOS, etc.
I'm baffled now and this is for one of the kids for homeworks, so my ears are getting sore !!
HELP PLS !!

> 1) External Monitor - External display works fine (connected via VGA)
This is most important info which you have provided in your message.
In case the external monitor is OK, the GPU/motherboard should be also OK.
From my point of few the display panel (backlight) is faulty.
The display backlight does not seem to work properly.
You said that you have replaced the display well, is it compatible display panel?

Satellite C50-A628 running slow

Good day everyone.
Sorry if this post is in the wrong section, but, please help.
I know that maybe some people might think this as a waste of time or just something you could search in google, but, for about *7 months*, I've been trying to figure out why my new laptop is running slow.
As this laptop comes without any pre-installed operating system, there is no restore disk or factory reset disc. For the first few months of using my laptop, it's been running +windows 8.1 pro+.
Every time I use it, it opens everything okay, except when my browser is open. everything becomes unstable and doesn't respond. after a few seconds of not responding, I can use it again as long as I don't multi-task. I've installed the latest graphics drivers and some apps, but that's it. I thought that it was a problem with windows 8 about 5 days ago, so I downgraded to +windows 7 ultimate 64 bit+.
Now, i'm starting to think that maybe the problem is because of the drivers since I didn't install the drivers required for the laptop since it doesn't come with the drivers and reset disk.
So now, I'd like to ask for support on this matter. Please show the proper installation of windows 7 and the all the drivers required for my laptop which is the *TOSHIBA SATELLITE C50-A628 RUNNING WINDOWS 7 ULTIMATE 64-bit*. (Or any idea on why this problem is occuring)
Thank you and have a nice day.
-George B.

One note: the system performance, especially the internet browser issues has NOTHING to do with drivers preinstalled on your notebook. Mostly drivers are not the reason why the notebook runs slow (open software slowly, etc)
Fact is that your Satellite C50-A628 was equipped with 2GB RAM.
Additionaly an part of this 2GB RAM is shared with GPU: Intel HD Graphics
Therefore less than 2GB are used for system and applications.
To be honest; this is not enough to run system smoothly!
I recommend you to upgrade the RAM at least to 4GB/6GB or better 8GB RAM to get better performance.
Regadign the drivers download:
The Win 7 driver can be downloaded here:
http://www.toshiba.eu/innovation/download_drivers_bios.jsp?service=EU
Choose: Satellite C50-A PSCJGF

Hp mini 110 bios password reset

When I turn on my daughters computer it goes straight to bios password, Since i never added a password this is a problem!
I tried pulling the cmos battery and that seems to have made the problem worse, any help would be greatly appreciated

Hi,
Please check your other post:
http://h30434.www3.hp.com/t5/Notebook-Recovery/bios-password-reset-on-hp-mini-110-error-code-CNU0040...
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Satellite C50-A-1JN - Windows 8.1 - desktop keeps attempting to reload

Satellite C50-A-1JN - Windows 8.1 installed pre-purchase.
Purchased this laptop about two months ago with no problems until tonight. The laptop loads fine up until the app home screen, but when clicking on desktop the laptop seems to attempt to 'reload' itself constantly, and I can't open any of the desktop files or do much of anything!
Has anyone suffered from similar issues and can advise of a fix? I can provide a video of what happens if this helps diagnosis/a solution.
Many thanks in advance.

Hi
From my point of few the system is muddled up and i would recommend you to reset the Win 8.1 system to the default settings
This is not very complicated but before doing this, I recommend you to backup your personal data.
Microsoft has published short instruction how to do that. Take a look here:
http://windows.microsoft.com/en-us/windows-8/restore-refresh-reset-pc
I would recommend you to test the first option without affecting the files. In case this does not solve your issue, check the 2nd option: Recovery.

HP rp5700 Business desktop CMOS password

everything I've read and tried to clear the setup password has not worked.. there has to be a trick that no one has shared yet... I can get complete operation but unable to change the bootup because of the CMOS password.. help would be much appreciated for sure... SemperFi and thx it is an HP RP5700 desktop computer w/ Windows 7

Password Security and CMOS Establishing a Setup or Power-On password
1. Turn on or restart the computer.
2. As soon as the computer turns on, press the Esc key while “Press the ESC key for
Startup Menu” message is displayed at the bottom of the screen.
3. Press the F10 key to enter Computer Setup.
4. To establish Setup password, select Security > Setup Password and follow the
instructions.
- or -
To establish a Power-On password, select Security > Power-On Password and
follow the instructions on the screen
5. Before exiting, click File > Save Changes and Exit. Resetting a Setup or Power-On password
1. Turn off the computer and disconnect the power cord from the power outlet.
2. Remove the access panel.
3. On the system board, locate the header labeled CMOS+PASSWORD.
4. Remove the jumper and place it on pins 1 and 2.
5.Wait for three seconds, and then replace the jumper to its original position (pins 2
and 3).
6. Replace the access panel and reconnect the power cord.
7. Turn on the computer and allow it to start. Resetting CMOS
1. Turn off the computer and disconnect the power cord from the power outlet.
2. Remove the access panel.
3. On the system board, locate the header labeled CMOS+PASSWORD.
4. Remove the jumper and place it on pins 1 and 2.
5.Wait for three seconds, and then replace the jumper to its original position (pins 2
and 3).
6. Replace the access panel and reconnect the power cord.
7. Turn on the computer and allow it to start. Note: Refer the manual Page 2 in the Parts information section from the below link that will help you to remove the power on password: http://h20565.www2.hp.com/hpsc/doc/public/display?sp4ts.oid=5299218&docId=emr_na-c03577916&docLocale=en_US Hope this helps, for any further queries reply to the post and feel free to join us again **Click the White Thumbs Up Button on the right to say Thanks**Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem. Thank You,K N R KAlthough I am an HP employee, I am speaking for myself and not for HP

Reboot and select proper boot device on satellite c50-b

So i have had this satellite c50 - b series for over month and it now says reboot and select proper boot device. My laptop does not have a disk drive, an it still says the hard disk drive is available, but when i go to the boot menu it does not give me the hdd recovery option. Please help me out fixing this problem. I have even tried f2 and stilll nothing. Please reply back with some answers

f12 to reach the recovery.
No boot device can mean a bad hard drive or did something get changed in the bios? f2 to reach bios and set to the defaults.
Some laptops have a reset in the bottom of the laptop, see picture:
S70-ABT2N22 Windows 7 Pro & 8.1Pro, C55-A5180 Windows 8.1****Click on White “Kudos” STAR to say thanks!****

Satellite C50-A - HDMI TV not recognized

Dear all,
I just bought the Toshiba Satellite C50-A-U19 (pscg6e) with windows 8 64bit 3 days ago. The HDMI connection to my TV worked for 2 days, but right now the laptop does not display the TV as a device.
I've tried several booting sequences, and tried to "find new hardware" in the device manager. I've changed HDMI ports on the TV. Still, there is no sign that the TV is recognized. I've tried using <winkey> + <p> but because no additional monitor is detected nothing happens.
I've changed the HDMI cable, and tested the cable (and the TV HDMI port) by using a playstation.
I've downloaded and installed the latest display drivers from the toshiba website. I tried using the device manager to see if any additional updates are available, windows tells me i've got the latest drivers already.
I've used the "restore system" function to set the configuration back one day, but to no avail. I've spent about 3 hours trying to solve this problem and I'm so frustrated right now.
I'm absolutely clueless what else i can do at this point to get the HDMI to link up with my TV. All help will be greatly appreciated. please please please help me!

Thanks for your reaction.
I've not created a recovery media. Can i still do this or is it too late by now? Is it possible for me, after using the notebook for a week, to reset to " factory settings" or only to reset to the ssettings i have right now?
I should also note that the problem changed for a bit. First of all, i used the recovery feature again and the HDMI output worked for about a day. The next time i booted the notebook, the HDMI was recognized when the TV was switched on a non-HDMI channel. As soon as i switch to the HDMI channel on the TV, my laptop screen went black for a second (to readjust i guess) and it no longer recognizes the TV at all. It acts like it is not connected.
when the TV is on a non-HDMI channel, i can make the laptop screen go blank by using the screen option "only second screen." As soon as i switch the TV to an HDMI channel (making it unrecognizable for the PC), the laptop screen turns back on.
WHen i switch from the HDMI back to non-hdmi, the laptop won't recognize the TV again. Only when i power down and restart the TV it is recognized (but only as long as i'm on non-hdmi channels).
Message was edited by: rivvyriv

Bios password reset for HP 6735s (not 6735b) laptop

Recently, I managed to find a replacement board for my laptop however I found out that there was an issue with getting into the systems BIOS as there was a password set and the company I bought that board off had no clue what it was set to.
Now I have tried all of the simple ways like removing the CMOS battery and trying the backdoor password (which I might add never worked) but still cant get into the bios to update it or change the boot sequence. I even requested some information about this issue directly to HP Support and they cant help due to the fact that the software they have to do this only work on 2009 and later models (my machine was built 2008).
I have all the information including the UUID however cant seem to find either a DOS application that will succesfully view or reset the password or anyone that would be able to point me in the direction of such a appliocation.
Before anyone says anything about a reset button or anything that simple, I have tried all that and have no such jumper or switch on the mainboard.

Refer:
http://forums.mydigitallife.info/threads/49497-HP-Probook-Elitebook-BIOS-Password-Reset-Utility?s=ad...
Wish you luck,
Karthik
--Say "Thanks" by clicking the Kudos (purple thumbs up icon in the lower right corner of a post)
--Please mark the post that solves your problem as "Accepted Solution"

Satellite C50-A CMOS password Reset

Similar Messages

Maybe you are looking for