Satellite C50-B-12V- can mic still work even after I plugged in headphones?

Hello,
My Satellite C50-B-12V comes with only one port for headphones, and microphone. thus, if I'm on a Skype call and want to hear clearer - so I plug in headphones, then the other party stops being able to hear me - presumably because my plugging in headphones disabled my microphone - thus I can now hear better - but my voice isn't going through the computer anymore.
I understand I can correct this problem by buying an audio y cable - which will make my 1 port for headphone/microphone into two ports - thus I can then plug in headphones and also a microphone - and the problem should be solved.
My question is, is there anyway I can set my computer to somehow not deactivate my microphone when I plug in headphones? Meaning - I would plug in headphones so that I can hear the other party better - but the computer external microphone would still be working?

Hi again
I have tested it on my machine a bit using Skype audio settings.
Here is how it works on my Satellite S50-B
When I use right headset (mic and headphones in one port) everything works as usual. Internal mic is OFF and I can speak through mic on headphones.
If I use my standard Logitech headset and connect headphones only, internal mic works anyway. So my voice is recorded through internal notebooks mic but I can hear sound on the headset.
There is no option where I can switch between internal or external microphone.
Can you please test it with your headset?
Which headset do you use exactly?

Similar Messages

My iPod touch is disabled and I cannot even get it to work even after I plugged into my computer

My iPod touch is disabled and I cannot even get it to work even after I plugged into my computer..please help!!!

Try recovery mode agian.
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
If you previously turned on FIndMyiPod on the iPod in Settings>iCloud and wifi is on and connected go to iCloud: Find My iPhone, sign in and go to FIndMyiPhone and use Remote Wipe to erase the contents of your device. If you have been using iCloud to back up, you may be able to restore the most recent backup to reset the passcode after the device has been erased.
You can also wipe the iOS device by installing the FindMyiPhone app on another iOS device and using that app to wipe the device.
Place the iPod in recovery mode using one of these programs:
For PC
RecBoot: Easy Way to Put iPhone into Recovery Mode
or
http://joshuabailey1997.wordpress.com/2010/09/02/recboot-v1-3/
If necessary:
Download QTMLClient.dll & iTunesMobileDevice.dll for RecBoot
and
RecBoot tip
RecBoot may have problems on 64X windows, then try:
Tenorshare ReiBoot – Enter & Exit iPhone, iPad, iPod Recovery Mode with a Single Click
For MAC or PC
The Firmware Umbrella - TinyUmbrella
Installs blootware on PC too
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.

Why won't Quicktime 7.2 work even after installing plug-ins?

After initially installing Quicktime 7.2, a faint question mark would appear instead of internet videos which required quicktime. I installed one kind of plug-in, but this only fixed it for a little while. Then I installed a bunch of other plug-ins hoping that this would fix it but it only fixed it for a while as before. How do I resolve this problem? I have a mac and mac osx 10.4.10 and use Firefox for internet browsing. And, how do I even tell where my plug-ins are? Thanks!

Apple Discussions!
Make sure you have the latest versions of Adobe Flash Player Software
QuickTime Preferences > Advanced > MIME Stettings > Miscellaneous.
Deactivate the "Flash Media" option.
This tells the browser not to to display Flash Media and lets the newly installed Adobe software work its magic.
"And, how do I even tell where my plug-ins are?"
If you actually know the names of the plug-ins, you can use Spotlight to locate or you can manually check the following folders:
HD>Library>Internet Plug-Ins
Home>Library>Internet Plug-Ins
HD>Library>QuickTime

Ipone5 screen became curved so you can show filter lighting internal slightly from both sides and then taking the bend is growing even split-screen device by 2 mm from the top screen still works, even though it is no longer adjacent to the device, but fro

ipone5 screen became curved so you can show filter lighting internal slightly from both sides and then taking the bend is growing even split-screen device by 2 mm from the top screen still works, even though it is no longer adjacent to the device, but from the bottom with the appearance of a blue line longitudinally as a result of the curvature of the screen is also a button home-does not function well will not make my device and search for a solution with my friends interested in the technology, because I am embarrassed by the form of the device after the holidays where it seemed like device industry is poor and I am writing to Mtabaana that the iPhone is the best among "smart phones" unwillingness on the label and I have reasons as he have many ideas Perhaps the first is to install the replacement screen with adhesive to Atsamad in front of the machine heat from the inside and the outside of the hot weather in another way Macaianikiholas latest device that will not require recharging,,, NOTE: void wrought screen contributed to increase the signal network and wifi is erase

ipone5 screen became curved so you can show filter lighting internal slightly from both sides and then taking the bend is growing even split-screen device by 2 mm from the top screen still works, even though it is no longer adjacent to the device, but from the bottom with the appearance of a blue line longitudinally as a result of the curvature of the screen is also a button home-does not function well will not make my device and search for a solution with my friends interested in the technology, because I am embarrassed by the form of the device after the holidays where it seemed like device industry is poor and I am writing to Mtabaana that the iPhone is the best among "smart phones" unwillingness on the label and I have reasons as he have many ideas Perhaps the first is to install the replacement screen with adhesive to Atsamad in front of the machine heat from the inside and the outside of the hot weather in another way Macaianikiholas latest device that will not require recharging,,, NOTE: void wrought screen contributed to increase the signal network and wifi is erase

When i make calls, all i can hear is static, and when i plug in headphones or turn the speaker on, it still doesnt work. but facetime, music, an apps sound still work. help? iphone 5

when i make calls, all i can hear is static, and when i plug in headphones or turn the speaker on, it still doesnt work. but facetime, music, an apps sound still work. help? iphone 5

Hello Delaney1130,
It sounds like you are getting static on both the receiver and the speaker when you make a call. I would use the troubleshooting from the following article to help resolve the issue named:
iPhone: Troubleshooting issues making or receiving calls
https://support.apple.com/kb/TS3406
Toggle airplane mode: Tap Settings > Enable Airplane Mode, wait five seconds, then turn off airplane mode.
Check your phone settings:
Check your Do Not Disturb settings: Tap Settings > Do Not Disturb.
Check for any blocked phone numbers: Tap Settings > Phone > Blocked.
See if Call Forwarding is turned on: Tap Settings > Phone > Call Forwarding.
Ensure that your software is up to date:
Check for a carrier settings update.
Check for an iOS software update.
Note: Some updates may require a Wi-Fi connection.
If the iPhone has a SIM card, reseat the SIM card.
If the iPhone 4 or iPhone 4s is on the Verizon network, dial *228 from the iPhone and select option 2 to update the Preferred Roaming List (PRL). The PRL determines the cellular towers the phone uses for cellular service, selecting those with the best signal strength.
Reset the network settings: Tap Settings > General > Reset > Reset Network Settings.
Try to make or receive calls in another location.
Attempt to isolate to one network band:
If you're having the issue on LTE, disable LTE, if possible, and try again.
If you're having the issue on 3G/4G, disable 3G/4G, if possible, and try again.
Contact the carrier to check the following:
Your account is properly configured to use the specific iPhone that has the issue.
There are no localized service outages.
Your account doesn't have a billing-related block.
Your calls don't have errors on the carrier system.
Restore the phone as new.
If the above steps don't resolve the issue, go to an Apple Retail Store, carrier, Apple Authorized Reseller, or contact AppleCare to send the phone in for service.
Thank you for using Apple Support Communities.
All the very best,
Sterling

FCP to Compressor (can I still work in FCP will export is happening)?

This may be a dumb question. Usually I export from FCP to a master ProRes, THEN bring the ProRes into Compressor to make various formats. And I know I can continue working in FCP while this is happening.
I want to short circuit that process on this job, go straight out of FCP to Compressor. Which works fine. I'm wondering, once I've started the batch process in Compressor, can I be working with FCP while it is exporting THROUGH Compressor?
Or am I going to crash the whole process?
All ears,
Ben

Please excuse typo in question:
FCP to Compressor (can I still work in FCP WHILE export is happening)?
S'cuse me.

Can you still work on laptop while backing up

can you still work on laptop while backing up?

Yes.. but if you are backing up over wireless and also using wireless for internet it might be slow.. it is always faster to do the first backup using ethernet.. but the normal TM backups every hour are generally very small and you will hardly notice if at all.

When I sync with my iphone i get an error reporting message but the sync still works. After trying to download 10.6.3 Mac OSX Snow Leopard, this message appears every few seconds until I quit Entourage. How do I turn this message off?.

Question:
When I sync with my iphone I get an error reporting message but the sync still works. After trying to download 10.6.3 Mac OSX Snow Leopard, this message appears every few seconds as long as Entourage is open. This continues until I quit Entourage. How do I turn this message off? It interferes with any other work I am doing. I appreciate any suggestions.

I only have one video project that I ever published to iDisk. It didn't have any music or photo files attatched to it, just a few clips stitched together. I can play these clips right now in the Event Library (so I know the source files are on my computer), but strangely, under the Project Library, the project is not there. I'm almost certain that I didn't store the project on iDisk; I just completed the video and published it to iDisk (as a .mov file I think) for family to see. I've tried to figure out how to get iDisk to stop looking for this project to no avail.
I don't know if others have experienced this, but if I click on any project and on the menu bar select Share --> Remove From --> Media Browser... it lists iPod, iPhone, iPad, tv, Computer and MobileMe. Why would MobileMe be an option here? This is the case for any video project I select. Didn't iLife '11 and/or OSX 10.8 remove all mention of MobileMe? I wonder if this is part of the problem too.
Edit: I just removed every project I have from the Media Browser. Still no luck.

ESPN Card still working even though I am now on fl...

As above my espn card is still working even though I no longer have a pack on. Phoned up to be told I am not been billed for it. Can a mod help get this turned off or confirm to me I am not been billed for it.
My on demand now has charges next to it so that part is correct its just the espn channel is still operating when it shouldn't be.
Solved!
Go to Solution.

Hi Daniel,
I can get this sorted for you. Please drop me an email with your Vision account details and il get the ball moving.
Cheers
Sean
BTCare Community Manager
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry that we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)

How can I OPEN files I just downloaded? They're on the DOWNLOADS screen of Firefox but I can't open them even after double-clicking? And they're not on the FOLDERS as well. I tried RIGHT-CLICK and the "open dowloading folder" or something does not work! P

How can I OPEN files I just downloaded? They're on the DOWNLOADS screen of Firefox but I can't open them even after double-clicking? And they're not on the FOLDERS as well. Even the right-click is not working ... the "open containing folder" does not work.
== This happened ==
Not sure how often
== ALWAYS! ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; Trident/4.0; GTB6.5; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0; InfoPath.2)

Open Containing Folders is never active.

HT4528 my podcast app is shutting down after a few seconds iv tried to reinstall several times but nothing is working even after the podcast update last week im still having no luck getting it working any suggestions?

my podcast app is shutting down after a few seconds iv tried to reinstall several times but nothing is working even after the podcast update last week im still having no luck getting it working any suggestions?

if you are subscribed to the Hardwell podcast... quickly open the Podcast app and delete the most recent Hardwell podcast from 3/22.
for some reason that's causing the crash. i've deleted and it works fine again.

Social App not working even after update from noki...

nokia n8 social loading feeds.
My wife and i have the same problem now, only last week she said my phone will not work on facebook the widget on main home screen will not load feeds at all, and the widget is now blank saying refresh all the time, so i linked the phone up to the computer and did a scan for new updates with nokia updater which you can download from nokia site.
Its now the 4th jan and the phones still will not work even after and update from a socail app,
nothing , facebook will load after a few pushes, and looks like its loading till it says loading feeds then it says the (wording unable to load news feeds)

Uninstall the social app and reboot your phone. Then go to software updates and reinstall from the offering given in the updates. I've uninstalled and reinstalled social twice and it has worked both times.
blitZkid
Nokia C7: Running on Nokia Belle
"If I'm helpful in anyway, a click of appreciation on the star would be nice"

The g, h and backspace on my keyboard are not working even after replacing with a new one.

The g, h and backspace on my keyboard are not working even after replacing with a new one. I have also updated my BIOS still d same. Please help me ASAP.
...am waiting for a QIUCK RESPONSE

How does a usb keyboard attached externally work?
You might try a "hard reset" where you remove battery and AC charger, hold down power button 20-30 seconds and then reassemble and turn on. Reset BIOS (F10) to default settings, too.

Ios 6, my wifi doesnt work, even after switching wifi on and off, aswell as removing saved wifi spots and switching from manual to auto

ios 6, my wifi doesnt work
even after switching wifi on and off
as well as removing saved wifi spots
and tried switching from manual to auto
it works intermittently after these changes are made, but still shuts off.
i have ios 6 on both the iPhone 4 & the Iphone 5.
my router at home is D-Link router
please help!

You have the same problem in two mobiles? Uou....
I have had used D Link router before, and I faced problems to connect my computer.
Now I bought Netgear, and it shows strongly better than the f.... D Link...
Try:
Settings>>WiFi, and then turn off Ask for Conection;
Or:
Settings>>Privacity, be sure the Location Service is turn on;
Or:
In Settings>>General>>Reset, select "Reset all Adjusts". (Sorry, but it will change some personal adjustments, but will not delete anything at all)

Webcam is not working even after I reinstall the system software

My webcam is not working even after I reinstall the system software.
My questions are follows:
Should I bring it to repair or get a external webcam?
At approximately how much would be cost for repair?
Which webcam I should get?
Thank you very much!
Tian

Update, I fixed it although it feels more like a workaround. I had to enable the extension in extension manager. That still left a blank panel, but once I closed and reopened the panel I was prompted to login. Seems that closing and reopening the panel is the fix once it is enabled.

Satellite C50-B-12V- can mic still work even after I plugged in headphones?

Similar Messages

Maybe you are looking for