Satellite C50-B with Win 8.1 - PXE error appeares using UEFI boot mode

I have a C50-b laptop running Win 8.1 and recently needed to boot it from a usb key so eventually found the way to do that (miss the bios first boot menu) and managed to do that.
My problem is even when I have returned to uefi and set the boot order to be local disk, cd, network it asks everytime do I want to boot for PXE IP4,IP6 then IP4 and IP6 again. I have also disabled secure boot
I think some value is missing when I switched to BIOS and back to UETI boot option but where is the laptop getting the setting to tell it to PXE/Network boot when its down the list and wake on LAN is disabled.

According to the automated support on the site I should do the following for Win 8
Switch on the notebook and immediately begin tapping the F2 key continuously.
When the system setup (BIOS) appears, stop tapping F2. Tap F9 once, select 'Yes', and press Enter.
Use the cursor keys to move to the Advanced menu.
Choose System Configuration and press Enter.
Ensure that Boot Mode is set to UEFI Boot.
Press Escape to return to the Advanced menu and choose the Security menu.
Set Secure Boot to Enabled.
Press F10 once, select 'Yes', and press Enter.

Similar Messages

Satellite Pro C50: Installation of Win 7 using UEFI boot mode

I want to install Windows 7 Pro 64 bit on Sat Pro C50 (downgrade if you like - supplied with Win 8), but I want it UEFI booting, with GPT partitioning.
I am happy to wipe existing partitions if that solves problem.
I _have_ disabled Secure Boot.
Booting Win 8 install DVD works;
Setting CSM boot and booting from Win 7 DVD works - but this isn't what I want.
Setting back to UEFI boot and boot Win7 install media - locks up at "Starting Windows" screen.
Media _is_ good, works OK on other manufacturers' PCs.
I am not convinced this is a Microsoft problem.

Hi
On Toshiba notebooks where UEFI BIOS is available, its necessary to disable secure boot and to change the boot mode to CSM in order to boot from external sources and to install other systems than Win 8 or Win 8.1
Some workarounds in the internet describes the installation of Windows 7 in UEFI mode but I doubt this will be possible on Toshiba notebooks since the BIOS is different and modified for each notebook series.

While trying to change a BOM with transaction CS02, a runtime error appears

While trying to change a BOM with transaction CS02, a runtime error appears.
In intial screen he entered material ,plant BOM usage and date valid from after executed then id displayed item list in that he wantu2019s delete one item, he has been deleted selected item after that when he was saving he is getting runtime error
Developer trace
ABAP Program SAPLKED1_WRITE_CE4_BPS1                 .
Source LKED1_WRITE_CE4_BPS1U01                  Line 30.
Error Code SAPSQL_ARRAY_INSERT_DUPREC.
Module $Id: //bas/640_REL/src/krn/runt/absapsql.c#17 $ SAP.
Function HandleRsqlErrors Line 775.
RABAX: level LEV_RX_STDERR completed.
RABAX: level LEV_RX_RFC_ERROR entered.
RABAX: level LEV_RX_RFC_ERROR completed.
RABAX: level LEV_RX_RFC_CLOSE entered.
RABAX: level LEV_RX_RFC_CLOSE completed.
RABAX: level LEV_RX_IMC_ERROR entered.
RABAX: level LEV_RX_IMC_ERROR completed.
RABAX: level LEV_RX_DATASET_CLOSE entered.
RABAX: level LEV_RX_DATASET_CLOSE completed.
RABAX: level LEV_RX_RESET_SHMLOCKS entered.
RABAX: level LEV_RX_RESET_SHMLOCKS completed.
RABAX: level LEV_RX_ERROR_SAVE entered.
RABAX: level LEV_RX_ERROR_SAVE completed.
RABAX: level LEV_RX_ERROR_TPDA entered.
RABAX: level LEV_RX_ERROR_TPDA completed.
RABAX: level LEV_RX_PXA_RELEASE_RUDI entered.
RABAX: level LEV_RX_PXA_RELEASE_RUDI completed.
RABAX: level LEV_RX_LIVE_CACHE_CLEANUP entered.
RABAX: level LEV_RX_LIVE_CACHE_CLEANUP completed.
RABAX: level LEV_RX_END entered.
RABAX: level LEV_RX_END completed.
RABAX: end RX_RFC
In sm21
Perform rollback
Run-time error "SAPSQL_ARRAY_INSERT_DUPREC" occurred
     Short dump "090618 110101 donalda 11557 " generated
Runtime Error          SAPSQL_ARRAY_INSERT_DUPREC
Exception              CX_SY_OPEN_SQL_DB
       Occurred on     18.06.2009 at   11:01:01
The ABAP/4 Open SQL array insert results in duplicate database records.
What happened?
Error in ABAP application program.
The current ABAP program "SAPLKED1_WRITE_CE4_BPS1" had to be terminated because
one of the
statements could not be executed.
This is probably due to an error in the ABAP program.
What can you do?
Print out the error message (using the "Print" function)
and make a note of the actions and input that caused the
error.
To resolve the problem, contact your SAP system administrator.
You can use transaction ST22 (ABAP Dump Analysis) to view and administer
termination messages, especially those beyond their normal deletion
date.
Error analysis
An exception occurred. This exception is dealt with in more detail below
. The exception, which is assigned to the class 'CX_SY_OPEN_SQL_DB', was
neither
caught nor passed along using a RAISING clause, in the procedure
"RKE_WRITE_CE4__BPS1" "(FUNCTION)"
Since the caller of the procedure could not have expected this exception
to occur, the running program was terminated.
The reason for the exception is:
If you use an ABAP/4 Open SQL array insert to insert a record in
the database and that record already exists with the same key,
this results in a termination.
(With an ABAP/4 Open SQL single record insert in the same error
situation, processing does not terminate, but SY-SUBRC is set to 4.)
How to correct the error
The exception must either be prevented, caught within the procedure
"RKE_WRITE_CE4__BPS1"
"(FUNCTION)", or declared in the procedure's RAISING clause.
To prevent the exception, note the following:
Use an ABAP/4 Open SQL array insert only if you are sure that none of
the records passed already exists in the database.
You may able to find an interim solution to the problem
in the SAP note system. If you have access to the note system yourself,
use the following search criteria:
"SAPSQL_ARRAY_INSERT_DUPREC" CX_SY_OPEN_SQL_DBC
"SAPLKED1_WRITE_CE4_BPS1" or "LKED1_WRITE_CE4_BPS1U01"
"RKE_WRITE_CE4__BPS1"
If you cannot solve the problem yourself, please send the
following documents to SAP:
1. A hard copy print describing the problem.
   To obtain this, select the "Print" function on the current screen.
2. A suitable hardcopy prinout of the system log.
   To obtain this, call the system log with Transaction SM21
   and select the "Print" function to print out the relevant
   part.
3. If the programs are your own programs or modified SAP programs,
   supply the source code.
   To do this, you can either use the "PRINT" command in the editor or
   print the programs using the report RSINCL00.
4. Details regarding the conditions under which the error occurred
   or which actions and input led to the error.

Hi ,
you are getting beacuse u are trying to do mass update to database.
Please check that below note are applicable to your system.
Note 453313 - DBIF_RSQL_ERROR_INTERNAL for mass insert
Note 869534 - AFS MRP doesn't work properly with all BOM item categories
Thanks Rishi Abrol

Satellite C50-B-13T - Win 8.1 cannot change desktop background

Hi folks,
I'm new to this forum so please bear with me.
I bought a new Toshiba Satellite C50-B-13T laptop yesterday with Windows 8.1 installed and I cannot change the desktop screen from a blank black one to a picture of my choice... I've tried everything, and even looked for videos on Youtube to see if there's a remedy for it.
When I look at the control panel the thumbnail shows the picture I've chosen, but the actual desktop (not the smart screen bit) is still plain black. All of my icons work just fine but the background will not change.
If anyone can help me sort this out I'd be really grateful?
Thanks everyone :O)

You ask how to change the Windows background?
This is not very tricky.
Microsoft released a useful article regarding Windows system personalization.
Please check this aricle:
http://windows.microsoft.com/en-us/windows-8/personalize-pc-tutorial
Note: there is a difference between the desktop background and the lock screen.
The lock screen is the screen you see when you lock your PC (or when it locks automatically after you haven't been using it for a while).

Re: Satellite Z30-A with Win 8.1 - Driver update confusion

Hello,
I have a question regarding driver updates. Currently, Windows Update recommends me to update the audio driver (important) and the LAN driver (optional). Toshiba Service Station, however, doesnt offer new drivers for these devices.
My question is whether I should install these updates (particularly the important one) or if they are not approved by Toshiba yet?
Moreover, does anyone have a changelog for the new 3.8 Bios?
Thanks!

Thanks for the quick replies! I was just tempted because one of the updates was classified as "important", for whatever reason, which are normally those updates that should be installed (e.g. for security reasons). In fact you are right, I dont have any problems with my laptop.
Sorry, forgot to state the model: Z30-A with Win 8.1
Any ideas about the bios update?
Thanks!

Satellite P845T-107 with Win 8 PRO but after Win 8.1 update it isn't PRO

Yesterday at Saturn Salzburg bought the notebook.
It has on the bottom a PRO Windows 8 label.
Unfortunately, I first initiated the update to 8.1 and then only a backup created on a USB stick.
Windows has muddled up the the Pro version after Win 8.1 update.
Can not join domain, as I expect from a PRO version actually.
How do I get the original Pro version again?
The label does so, that there must have been a Pro license.
How do I get the licenses number?
I'm A bit sour ... how Toshiba is helping me?
Ekkehard
+Message was translated by google translator+

Hi
Regarding to the Toshiba Satellite P845T-107 specification page, the notebook was preinstalled with Windows 8 64bit.
[Toshiba Satellite P845T-107 specification page|http://www.toshiba.de/discontinued-products/satellite-p845t-107/]
It was not Pro version.
You can also check all the details about this notebook on the Toshiba Unit Details
http://aps2.toshiba-tro.de/unitdetails/
I will need to put the serial number to get the information.

Cannot import .MOV files with Premiere Elements 12: generic error. Using Windows 8.1 (64b)

This question was already on the forum for older version of Premiere and Windows. I'm making my videos (.MOV format) with the digital camera Casio EX-ZR400.
I have no any problems with Photoshop Elements 12 for pictures produced by this camera.

Dngineer
What is the source of your .mov file..(brand/model/settings of the camera that recorded the video)......what is the video and audio compression and frame rate?
Are you working with the 12.1 Update of 12? If not, please do so using an opened project's Help Menu/Update. Both QuickTime and Premiere Elements need to be run from a User Account with Administrative Privileges. Are you doing that?
Narrowing things down
Are all files with the .mov file extensions the only video files that you cannot import into the program? Any exceptions?
When you open Premiere Elements 12/12.1 to the Expert workspace and go to Publish+Share/Computer/QuickTime, does that choice have its presets?
Let us start here and decide what next based on your reply.
Thank you.
ATR

Accidentally deleted Atheros driver on Satellite C50-B-14Z

I accidentally deleted Atheros from my computer and now its not wireless. I tried to download it again from Toshiba support but there's no option for my laptop type. Can anyone help me fix this please?

Of course there is option for your notebook.
Go please to http://www.toshiba.eu/innovation/dow...ivers_bios.jsp
And choose drivers for Satellite C50-B with part number PSCLME.
You can download Win8.1 driver for Atheros. It is version 10.0.0.308.
Check it one more time please.

Satellite C50-A-1DV - Cannot boot from USB

Satellite C50-A-1DV PSCG6E-08P01CEN
I could previously boot from USB by selecting Secure boot to off and CSM boot in the system bios. Since I have upgraded my bios from 1.3 to 1.4 I can't seem to boot from a USB drive. I can boot from the CD but not USB.
Any Ideas?
Booji

hello
if you want install os in laptop then you should have to change the boot mode in BIOS menu.
for win 7 select the CSM boot mode
for win 8 select the UEFI boot mode
then boot by the pen drive and also CD/DVD.
Restart the system and hold the F2 key then you get your BIOS setup
if not get the BIOS setup by the process then you should tried power drainage.
Power Drainage process: just remove the battery and adapter of the laptop then hold the power key for 30 sec
after that connect adapter of the laptop then turn on system.
Try it...:)

Foxit reader with wine: full search don't react to mouse

Hello,
I want use full search feature in Foxit reader with wine.(to search for text in pdf's in specific directory). It does find text occurrences, *but* full search tab does not responds to mouse, and i can't select results. (actually, i need to tab through all bullets to start the search, because they don't react to mouse at all)
Does anybody tried it? Is there any solution?
I tried all Foxit versions, and they all behaves the same.
I used wine-1.1.44, but it was the same with all wine versions, for ~1 year.
Thanks

I had this feeling that there will be those questions...
To sum-up, no native Linux pdf reader has abilities, that i need.
I need to work a lot with pdf's, i need searching in directories, i need to annotate.
Foxit through wine is the closest solution to my needs, but there is this problem...
So please, don't ask any questions why i don't use this and that, i tried everything.
PDF-XChange works nicely with wine, and does everything, but it uses way too much recourses.
Okular is quite good, but when you annotate something, it gets so ssslow, and it stores markups not in pdf, so other pdf readers don't see annotations.
Back to question. Does anybody knows, why Foxits Full search sidebar, don't react to mouse? Maybe you had similar problems with other software?

Sopund Blaster 5.1 VX Not working with Win 7

I have a SB 5. VX not working with Windows 7 , Please reply any comlete solution.

Re: Sopund Blaster 5. VX Not working with Win 7Not sure if you are using the driver available from the support site for Win 7 but if not, you can get it here.

BPM_DATA_COLLECTION fails with (Output device "" not known) error

Hi all,
I have an issue with Output BPM_DATA_COLLECTION_1 job in the satellite system failing with 'Output device "" not known error. Since it is collecting data for Solution Manager system why does is it trying to find an output device.
It did not fail before and now I added another key figure (custom one) which is done the same way the other custom monitors are done in "Z_BPM_ECU_COLLECTOR" report and then in /SSA/EXM program, but the collector job started to fail.
Also, for some reason there are two BPM_DATA_COLLECTION jobs, one is BPM_DATA_COLLECTION_1 and the other is BPM_DATA_COLLECTION_2. _1 runs every 5 min and _2 is less frequent. They both seem to runt the same job which is /SSA/EXS. Why are there two jobs scheduled from solution manager in my satellite system?
Thank you very much for your help!

I am experiencing this same issue in our ECC 6.0 system. We currently have ST-A/PI release 01M_ECC600 level 0001 applied to our system. These jobs finish successfully in SM37, but I'm seeing the same error messages in our system logs (SM21).
When I try to update the output device that is associated with these jobs, the user ID running the jobs is not valid since it's user type is Communication Data.
Does anyone know if it ok to change the user for this job? Should it be run by DDIC? I believe the jobs were created automatically when we applied ST-A/PI release 01M_ECC600 level 0001.

Is Satellite C50-A441 preinstalled with Win 8.1 English language?

I haven't managed to get a straight answer on the microsoft forum so am posting here.
The following product ( [C50-A441|http://www.toshibamea.com/ComputerProduct/4/Satellite_C50-A441/52956?pageid=4] ) is advertised as Windows 8.1 Single Language 64-bit (pre-installed).
I am currently based in the middle east and asked in the shop if the language was US English but I did not get a clear answer and I don't want to buy a laptop with Arabic.
Is there any way to know if it is in US English (I am not able to test before purchasing...).
Many Thanks.

The Satellite C50-A441 PSCGJV-009001AR was preinstalled with Toshiba image containing the Windows 8.1 in Arabic language.

Cannot find Win 8.1 drivers for Satellite C50-A-1DV

Hi.
I re-installed windows 8.1 from a disk I have, but I'm having driver problems, namely finding certain driver support on the Toshiba website.
It seem that my laptop isn't listed, or I can't find it in the support section for drivers.
The drivers I'm looking for namely are the motherboard drivers.
I already tried a driver site but my laptop was taking a good few minutes to power off after shutdown so I doubt those were correct. I'll try intel chipset device software and see if that gives me the correct ones.
Rest of drivers I can get simple enough through device manager, but not the chipset drivers, and probably usb 3.0 too.
On a side note, I noticed I don't need to type in the key, which I wrote down using belarc, I assume it's saved to the BIOS and windows auto detects it correct?

Hello
According notebook specification your notebook was delivered with preinstalled Windows 8.1 64bit so what you should do is to reinstall original recovery image that contains all necessary drivers.
When you say you have installed Win 8.1 from the disc, what does it mean exactly?
Have you installed your own OS version or original Win8.1 version from created recovery disc?
Anyway, al Win8.1 64bit drivers you can download from Toshiba download page - http://www.toshiba.eu/innovation/download_drivers_bios.jsp
There you can find all drivers for your Satellite C50-A-1DV with part number PSCG6E.
Check it out.

Satellite C50-A - upgrading to Win 8.1 bit from Win7

Hi
Wondering, I have the Windows 8.1, upgrade media I got for my Toshiba Satellite C50-A machine. Want to upgrade to Windows 8.1, and got the upgrade DVD, that came with the laptop. So do I just insert the DVD, click set-up, or do I need to go back to factory settings, then insert the DVD, and as a blind it student, will need sighted help.
Any help, tips, tricks from people done this before. I have a 1 TB USB Toshiba external drive, so have backed up everything on to that and added a couple of things today, but backed up all the rest of my stuff, docs, college work, e-mails, my rss feed settings, contacts for outlook 2010, programs, music, TV, movies, favorites, etc. so any advice.
Going to do this tomorrow. as doing a programming course and the instructor is using windows 8.1, and need to develop windows stores and windows phone apps.
Marvin from Adelaide, Australia.

Exact specification of your model is not known to me but I presume you got your machine with Win8.1 recovery disc so if you want to use Win8.1 you must boot your machine with this recovery disc and make clean OS installation.
I don't know if you got your machine with originally preinstalled Win7. If yes create recovery media (DVD or USB) using preinstalled Toshiba recovery disc creator before you start Win8.1 installation.
This created recovery media you can use if you want to have machine with Win7 again.

Satellite C50-B with Win 8.1 - PXE error appeares using UEFI boot mode

Similar Messages

Maybe you are looking for