Satellite C50 - Secure Boot not configured correctly Build 9600

Hi,
Recently purchased a refurbished Toshiba Satellite C50 running windows 8.1 operating system. Was very pleased with it but found the message 'SecureBoot not configured correctly Build 9600' in a watermark in the bottom right corner of my desktop.
Decided to search the internet for a resolution and after going on 3 troubleshooting sites, found out about the BIOS Setup required, however it warned that this was for advanced users who know their stuff about the technicalities of computers. Whilst I am computer literate, I'm not someone who likes to mess with the advanced options. Then, I stumbled across a reliable computer blog which had a detailed post on SecureBoot.
( Link to blog and specfic post:
www.techrepublic.com/blog/windows-and-office/deal-with-the-secureboot-isnt-configured-correctly-watermark-in-windows-81/ )
I thought this would resolve my issue, and I will admit it did help, telling me to use windows powershell as a precaution before using the BIOS setup. I was glad I did as it came back telling me that I have a non-production SecureBoot policy present on my laptop in which case I would have to ask for technical support for a system specific solution which would typically be a firmware update.
I did try to phone, but the line was very busy and felt it might be easier to post this issue on a forum.
If anyone has an answer please help as I really would like to enable SecureBoot if possible, as I believe computers should be set up with the best security options possible and it makes me feel comfortable knowing that it is set up securely.

Someone commented the blog and posted this solution:
The registry fix to remove the watermark is as follows.
1. Start the Registry Editor with Admin rights (C:\Windows\regedit)
2. Navigate to the following path
-> HKEY_LOCAL_MACHINE \ SOFTWARE \ Microsoft \ Windows \ CurrentVersion \ Policies \ System.
3. There, the two values " ConsentPromptBehaviorAdmin "and" EnableLUA "set to" 0 ".
You can also try to enable the secure boot option in BIOS (in case its not already enabled)
To get into the BIOS, press F2 while powering ON the unit.
Additionally recommend checking this Microsoft page:
http://windows.microsoft.com/en-us/windows-8/secure-boot-watermark

Similar Messages

PerformancePoint Services is not configured correctly but I'm Site administrator

Hi experts
I recenlty create a business intelligence site and set my active directory user as administrator.
I'm server and database administrator too.
but when I want to create a data source I get this error:
The Data source cannot be used because PerformancePoint Services is not configured correctly
I see some solution in then interent but some of them say that should set unattended user for performance point service.
I'm site administrator and Why I should set unattended user?
thanks
semi developer

You should set the Unattended Execution Account if you don't want to set credentials for data sources.
Kind regards,
Margriet Bruggeman
Lois & Clark IT Services
web site: http://www.loisandclark.eu
blog: http://www.sharepointdragons.com

Guest variable 'guest info.return_code' not configured correctly.

Hi,
I'm converting a SQL Server 2012 from Base DBVM to Base DB Template. After a while working on the conversion I get this error:
"Guest variable 'guest info.return_code' not configured correctly."
If I double-click the error I get the following message: "Cannot get detail information for the specified resource bundle."
I'd really appreciate if anyone can help with the issue.
Regards
Fernando

carlasummers wrote:
...Error: variable hourlyRate might not have been inialized and variable hoursWorked might not have been inialized. ....Haven't read your code, but whenever I see an error like this, I find that usually correcting what it tells me to correct helps: initialize the variables.
i.e.,:
    double hoursWorked = 0.0;
    double hourlyRate = 0.0;
    double weeklyPay = 0.0;also: never use float when you can use double (there are exceptions but they are few).
also: You need to get the employee name within the loop. Also it would help to add the prompt: "enter \"stop\" to quit" or something of that nature. Assume that the users of your program are idiots.
Also, when posting code here, please use code tags so that your code will retain its formatting and thus will be readable -- after all, your goal is to get as many people to read your post and understand your code as possible, right?
To do this, highlight your pasted code (please be sure that it is already formatted when you paste it into the forum; the code tags don't magically format unformatted code) and then press the code button, and your code will have tags.
Another way to do this is to manually place the tags into your code by placing the tag [code] above your pasted code and the tag [code] below your pasted code like so:
[code]
// your code goes here
// notice how the top and bottom tags are different
[/code]Best of luck.
Edited by: Encephalopathic on Apr 25, 2009 6:56 AM

Lookup properties not configured correctly

Hi,
I have configured lookup query ,in which I am taking value from the RO form data like below.
UD_IDMSP.UD_IDMSP_IDMS_VERSION = '$Form data.UD_IDMSRF_IDMS_VERSION$'
Although the resuls are coming as expected I am getting "Lookup properties not configured correctly" this message in lookup popup window.
Please provide some guidelines.
Thanks,
Pallavi

Lookup Query :
select distinct UD_IDMSP_IDMS_User_ID from UD_IDMSP where orc_key in (select orc_key from oiu where ost_key in (select ost_key from ost where ost_status in ('Provisioned', 'Enabled') and obj_key = (select obj_key from obj where obj_name = (select lkv_decoded from lkv where lku_key = (select lku_key from lku where LKU_TYPE_STRING_KEY = 'RETS.RODisplayName.Lookup') and lkv_encoded = 'IDMS'))) and UD_IDMSP.UD_IDMSP_IDMS_VERSION = '$Form data.UD_IDMSRF_IDMS_VERSION$')
Lookup Column Name : UD_IDMSP_IDMS_User_ID
Column Captions : User ID
Column Names : UD_IDMSP_IDMS_User_ID
Column width : 100
This is all

Secure boot not working with MSI Z77a-G45 And system reserve not showing

Ok so i re did my windows after i did a zero fill on my hard drive as it was showing a corrupted sector on my disk that seemed to fix it for now, until it comes back if it does crossing my fingers it gone for good. But now i can't seem to get Secure boot to work i mean i did not have it before as i just slapped the motherboard in with a existing windows, that was to be expected but this is a clean install of windows 8.1 and i even have secure boot on but its not working and reports as off in windows. Is it because i have my bios set to legacy+UEFI??? would that make secure boot not work??. i even went as far as turning it off and back on again the secure boot setting nothing made a difference. I mean its not a big deal bit would be nice to know why its not working, also another wired thing and i will post pictures of it, as i cant see my system reserved partition in disk management but diskpart says it there, i will post those pictures any ideas??.

fixed it is my legacy+uefi another forum got back to me.

Lookup Query error: "Lookup properties not configured correctly"

Hi!
I have come up with some problems on configuring lookup query.
I get this error: "Lookup properties not configured correctly" on admin console-->user-->manage-->selecting the user-->Resource profile-->edit the process form
I created a table called "test_lookup" with the following columns: Oraganization, division and position (all varchars) in the database.
For Lookup Query:
This were the steps done on design console -->form designer-->properties tab:
On " Grupo(lookupfied) " I set the following properties:
Column widths = 100
Lookup Query = select Organization from test_lookup
Lookup Column Name = Grupo_teste
Column Caption = Organization
Column Names = Grupo_teste
On design console for Lookup definiton I set the following:
code: Lookup.KON.Grupo_teste
field: Grupo_teste
Lookup type: checked
Required: uncheked
Code key | Decode Key
Organization Organization
Any idea why this is hapenning? Any suggestion is more than welcome!
Thank you.
Kind Regards,
Kon

Refer this:
User list lookup
Column Names = usr_key,usr_first_name,usr_last_name
Lookup Column Name = usr_key
Lookup Query = Select usr_key, usr_first_name, usr_last_name from usr //(where act_key=123)
Column Captions = User Key,First Name,Last Name
Column Widths = 10,100,100
Have you tried this:
b)Select ACT_KEY from USR where USR_LOGIN = '$Requester Information.User Login$'
In lookup coloumn name=act_key
In coloumn width =100
In coloumn names=act_key
in coloumn caption =Organization Key

Measurement Computing USB-SSR24 error 42 Digital Port not configured correctly for requested operation

Using LV 2012 and ULx 2.02 LV driver:
LV is throwing an error 42 (Digital Port not configured correctly for requested operation) from the ULx write VI but only on PortCH. All my configurations are correct on the hardware and Instacal tests the ports OK. I've reinstalled everything and still see the same issue.
Since PortA is configured identical to PortCH, and PortA is functioning fine, I'm stumped. This is occuring on two different SSR24 DAQs so I don't think it's the hardware, plus I've already mentioned that the Instacal isn't having a problem with it.
I've attached my VI I'm using for debug.
Jeff
Attachments:
test of Wilmington.vi ‏19 KB

I worked with Measurement Computing and they agreed that there is a bug with certain DI/DO configurations. There are a possible 16 different DI/DO configurations with the hardware and apparently mine (PortA - DO, PortB- DI, PortCL-DI, and PortCH-DO will throw this error for PortCH. I'm currently using .net calls to work around the issue until the ULx driver is updated. I'll post that when I see it. Attached are the .net VI's that I'm using for simple static IO.
Attachments:
USB SSR DOT NET Write Bit.vi ‏20 KB
USB SSR DOT NET Read Bit.vi ‏21 KB

"This device is not configured correctly: Code 1"?

I have a brand-new iPhone 5c and every time I try to repair the connection between my phone and my computer, I get the message "This device is not configured correctly (Code 1)."
What on earth does this mean, and how can I fix it?
Thanks.

Then we simply will not tell you anything.
Good luck.
FYI, making such statements is a good way to be either ignored or get snarky responsed. We are users like yourself. Leave the attitude out.

Satellite C50-A0113 does not boot into windows

Hello.
I own a toshiba satellite C50-A0113 laptop running windows 8 64bit.
Ive had it for exactly two years a few days ago i restarted it and then when it starts it stops at the "Toshiba leading innovation" screen and then it says scanning and repairing drive C while on that screen it starts the process and then stops at 34%.
that was two days ago now it just gets stuck on the "toshiba leading innovation screen " then after a few minutes it says preparing automatic repair.
It then leaves that screen and goes to a black screen for a few minutes then flashes the blue screen written "your computer encountered a problem" then restarts.
I tried creating a bootable windows 8 disc in order to repair but it doesnt even boot into the usb.
I restart and press f12 in order to select the media to boot into. It checks the media goes to the toshiba screen then just goes black for some minutes untill it restarts.
May i please know what is wrong and how can i possibly fix this because the problem is clearly not my hard drive.
I removed it and put into another laptop and it was fine

Dear aya11,
Defiantly it is a operating system issue.
did you check in the BIOS mode??
if your laptop is working fine in the BIOS mode then you have to reinstall operating system.
if you have preloaded operating system then you can recover your operating system.
recovery option is :*
if you are using window 7 in your laptop then,
just restart your laptop and hold the "0" numeric key..u get option HDD recovery just enter in HDD recovery
then it showing popup for format laptop just click on the yes ..you get a next option and your laptop is getting restart.
if you are using window 8 in your laptop then
just restart your laptop and hold the "F12" numeric key..you get option HDD recovery just enter in HDD recovery
then it showing popup for format laptop just click on the yes ..you get a next option and your laptop is getting restart.
in case both option is not working then u have install a new OS.
Thnx :)

Toshiba Satellite C50 Startup Repair not working

Right, first off I am not very technologically savvy so apologies if I sound like I've no idea what I'm talking about because, really I don't.
My Toshiba Satellite C50 froze last night and I had no other option but to hold the power button down to turn it off. When it switched back on again it froze at the start screen as Windows was opening. Alas, I had no other option but to press the power button down again, this time taking me to the Startup repair screen. Now I've ran this about 10 times and it keeps running forever, not solving any repair issues at all. Every time I try to start Windows normally it freezes at the same Windows is loading screen.
Also I cannot find the recovery disk that came with the laptop and have tried F8 but every option seems to take me to the Startup repair screen again which isn't solving anything.
Please help!

There won't be a physical disc, no manufacturer's provide those nowadays. You can access the hard drive's recovery partition, which provides similar functionality, by holding the zero key while booting up, form there you can restore to the out of the box state. That will wipe all data on the drive, but if the hardware is still functional that should resolve the issue.
www.google.com

Satellite M-series does not start correctly

Hello,
I have the following problem: suddenly (don't know why, nothing changed) Satellite notebook shows black white screen with about the following:
(sorry, translated from german):
windows did not start correctly... due to software or hardware change.. pls choose last functional configuration if mistake was due to power shut down...
But this does not work, also all other options (start windows as normal, start in safe mode...did not work.
No idea what happenend !
Problem:
Actually moved to another country and forgot or lost recovery CD ! already contacted Toshiba for new one but maybe anyway somebody can help?

Hmm. Stupid situation. If possible try to obtain Microsoft WXP installations CD to see if you can start installations procedure properly and if you can use repair option too.
It is not easy to say what is wrong there but I just hope there is no problem with HDD. Try to use original recovery disc.

PhoneGap Build Dreamweaver Extension not displaying correct build state

Starting yesterday the PhoneGap Build Dreamweaver Extension doesn't display the correct build state for Android or Symbian after clicking "Rebuild Application". They always show as Build Queued but if you look at the build.phonegap.com site they have completed the build. I have tried loging out of the screen and logging back in. I have tried closing out of Dreamweaver and reopening. Both sections display correctly until the next time you hit "Rebuild Application".

Ok.
I backed up PGB and deleted the folder.
I created a new empty site and submitted it to Build. Once I reached the Key screen asking for your iOS, Android and Blackberry keys, I clicked continue and recieved the attached error.
I then clicked ok and it added a index.html and config.xml to the empty site. No matter how many times I clicked OK this error would not go away. So then I closed out of dreamweaver and reopened submitted the build again this time I made it past the Key screen but it said I had exceeded the number of Build projects I am allowed. A Project Settings file was never created for the new empty project.
I will send the Project Settings file for the project I am having issues with and the original PGB and the new PGB.

Enabling CredSSP Authentication Protocol - not configured correctly.

Hello,
I am trying to use CredSSP to delegate my user credentials to a server running Windows server 2012 to issue invoke-commands to a Network Storage Location.
I have tried the following on the client machine:
Ran these commands on an Administrative PowerShell (Windows 7):
1) Enable-PSRemoting
2) winrm quickconfig
3) Winrm set winrm/config/client '@{TrustedHosts="*.mydomain.com"}'
4) Enable-WSManCredSSP -Role Client -Delegate *.mydomain.com
5) PS C:\Windows\system32> Get-WSManCredSSP
The machine is not configured to allow delegating fresh credentials.
This computer is not configured to receive credentials from a remote client computer.
Since it did not succeed I looked in the settings:
1) Active Directory User and Computer -> [my computer] -> properties -> delegation tab. Changed "Do not trust this computer for delegation" to "Trust this computer for delegation to any service (Kerberos only).
2) Local Group Policies Editor -> Computer Configuration -> Administrative Templates -> System -> Credentials Delegation
- Double-Click the setting "Allow Delegating Fresh Credentials" made sure that it is enabled and click "Show".
There was WSMAN/*.mydomain.com in the list.
- I also enabled the setting "Allow Delegating Fresh Credentials with NTLM-only Server Authentication" as well but it
did not change the outcome.
3)  Local Group Policies Editor -> Computer Configuration
-> Administrative Templates -> Windows Components -> Windows Remote Management (WinrRM) -> WinRM client
- Enabled the setting, "Allow CredSSP authentication".
4)  Computer Configuration -> Windows Settings ->
User Rights Assignment
- Double-Click the setting "Enable computer and user accounts to be trusted for delagation"
- Added my user and computer to the delegation list.
I re-ran the commands from above but still got the same output.
Is there a setting that I am missing? Is there any suggestion to change any settings? or just any ideas with regards to getting it to configure correctly.
Thanks!

Hello,
I am trying to use CredSSP to delegate my user credentials to a server running Windows server 2012 to issue invoke-commands to a Network Storage Location.
I have tried the following on the client machine:
Ran these commands on an Administrative PowerShell (Windows 7):
1) Enable-PSRemoting
2) winrm quickconfig
3) Winrm set winrm/config/client '@{TrustedHosts="*.mydomain.com"}'
4) Enable-WSManCredSSP -Role Client -Delegate *.mydomain.com
5) PS C:\Windows\system32> Get-WSManCredSSP
The machine is not configured to allow delegating fresh credentials.
This computer is not configured to receive credentials from a remote client computer.
Since it did not succeed I looked in the settings:
1) Active Directory User and Computer -> [my computer] -> properties -> delegation tab. Changed "Do not trust this computer for delegation" to "Trust this computer for delegation to any service (Kerberos only).
2) Local Group Policies Editor -> Computer Configuration -> Administrative Templates -> System -> Credentials Delegation
- Double-Click the setting "Allow Delegating Fresh Credentials" made sure that it is enabled and click "Show".
There was WSMAN/*.mydomain.com in the list.
- I also enabled the setting "Allow Delegating Fresh Credentials with NTLM-only Server Authentication" as well but it
did not change the outcome.
3)  Local Group Policies Editor -> Computer Configuration
-> Administrative Templates -> Windows Components -> Windows Remote Management (WinrRM) -> WinRM client
- Enabled the setting, "Allow CredSSP authentication".
4)  Computer Configuration -> Windows Settings ->
User Rights Assignment
- Double-Click the setting "Enable computer and user accounts to be trusted for delagation"
- Added my user and computer to the delegation list.
I re-ran the commands from above but still got the same output.
Is there a setting that I am missing? Is there any suggestion to change any settings? or just any ideas with regards to getting it to configure correctly.
Thanks!
See
Secrets of Powershell Remoting book by Don Jones
Sam Boutros, Senior Consultant, Software Logic, KOP, PA http://superwidgets.wordpress.com (Please take a moment to Vote as Helpful and/or Mark as Answer, where applicable) _________________________________________________________________________________
Powershell: Learn it before it's an emergency http://technet.microsoft.com/en-us/scriptcenter/powershell.aspx http://technet.microsoft.com/en-us/scriptcenter/dd793612.aspx

Satellite M-115 S1061 Ethernet Controller not configured correctly

Hi all. I'm the third person who's owned this laptop and I have none of the original documentation, software - nothing. I recently had to reinstall the OS and since I didn't have the original OS I had to use another copy of WinXP pro that I had. Well, the network adapter is installed fine and working correctly, but the ethernet controller is not. I don't know a lot about these things, but I thought that if one was working right the other should be too. Do they use different drivers? I tried the file here:
http://cdgenp01.csd.toshiba.com/content/support/downloads/lan_driver_realtek_25058B.exe
and I tried the latest file from the realtek site, for my Realtek RTL8139 Family Fast Ethernet NIC.
Neither of those solved the problem. The Ethernet Controller is still there in DM with an exclamation mark next to it - along with the SM Bus Controller. Could the bus controller be the reason the controller won't install right?
What am I missing? Any help will be greatly appreciated.

Thanks, all, I appreciate the replies. Unfortunately, the problem persists. I've downloaded all drivers, installed everything I could find for the M115. Everything is working fine (including now the SMBus controller) EXCEPT the Ethernet Controller. It's still not installed properly. I've manually searched for a working driver in every lan driver download for the M115 I could find, and also the PCI_Install pack from the Realtek site. None of them work.
Someone please clarify something for me: is the ethernet controller a component of the Network adapter or is it related to the wireless card? I'm thinking it must be for the wireless because I don't have it on my desktop system, which doesn't have a wireless card. But if it's for the wireless, why can't I get an internet connection through my cable modem? The Network adapter on my laptop is working, and I see that all the settings are exactly the same as on my desktop, and when I run IPconfig it shows an IP address and subnet mask, but I keep getting that message that my conenction has limited or no connectivity. In addition to the Client, File & printer Sharing, QoS Packet Scheduler, and the Internet Protocol, should I be seeing anything else when I look at the Connection Properties of my laptop? (And for the record, I've installed the wireless drivers too.)
Could the problem have something to do with me using WinXP pro rather than the home edition originally installed on the laptop? Maybe none of the drivers are compatible with the pro version? Doesn't seem likely, but I'm getting desperate here. Also, is it possible I get no internet connection because I'm not using the original computer I set up my internet on? Something to do with different MAC addresses or something?
TIA!

Desktop screen on my Satellite C660-174 will not open correctly

I'm a newbie here so my question may be obvious to some,,,,but not to me!
My Satellite C660-174 laptop (running Windows 7) has stopped opening correctly. Everything is normal up to the point that my password is typed in. Instead of opening up to my 'desktop' with its icons all down the side I get a page with a 'Toshiba Leading Innovation' banner across it and just four random icons down the side.
How can I restore my desktop screen and all the icons?
Help will be appreciated.

It is really not easy to understand what do you see exactly.
Can you please make a pic and send some link where we can see it?
I really don't understand what could be the problem but what you can try is to start your machine with F8 and enter advanced boot options. Choose the entry "Repair your Computer" and press "Enter". Go forward until you will enter System recovery options. Try to make system restore to earlier time. Maybe this will help you to fix described issue.
http://aps2.toshiba-tro.de/kb0/HTD1303440001R02.htm

Satellite C50 - Secure Boot not configured correctly Build 9600

Similar Messages

Maybe you are looking for