Satellite C55-A-1N1 Black screen when switched on
I've had my laptop for 7 months, I've had a lot of problems with it from the beginning.
It has always run slow and started disconnecting itself from the internet for no reason.
A few days ago it refused to connect to the Internet at all and now when I switch it on I just get a black screen.
No beeps or logos just a black screen. It powers up OK, and I've tried switching on while plugged in and with just the battery running.
It's still under warranty but I wonder if anyone has any suggestions. I'm really disappointed as my last Satellite was brilliant for years, had no problems.
Are you able to access the BIOS?
To access the BIOS press power button following by F2 button.
In case this isnt possible try this:
Disconnect AC adaptor and remove battery.
Now press and hold power button 30sec long.
After that connect the AC adaptor and battery and press the power button once again to power up the notebook.
Is this possible? Feedback would be appreciated
Similar Messages
-
Why does my imac get a black screen when switching on
why does my imac get a black screen when turning on, and logging in is very slow.
I would first reset the SMC:
Shut down and unplug the Mac.
Keep the Mac unplugged for at least fifteen seconds.
Plug the Mac back in and do not turn it back on for at least five seconds.
Press the power button to turn the Mac back on.
Then I would reset the PRAM by rebooting the iMac while simultaneously holding the Command-Option-P-R keys until the machine restarts a second time.
Let us know if these procedures don't solve the problems.
Hope this helps -
Satellite U405 Black screen when I surf in the internet
Dear, I am a student in grade three and my laptop has a problem I want help. It will be black screen when I surf in the internet for over 3 hours. Why?
I guess my laptop battery is the key to the problem and some friends recommend a battery web for me.
what do you think about it?I have no idea why you are thinking that battery cause this issue???
In your case I would say that your graphic card driver has crashed
I recommend reinstalling or updating the graphic card driver to check if this would help to solve this -
Have been here before but still have not resolved a fix for a black screen when I try to access a PDF file using Safari...Now I've got a new iPad and need the User Guide which is only available in PDF and FireFox will not work.
Hello,
'''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
''(If you're not using it, switch to the Default theme.)''
* On Windows you can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* On Mac you can open Firefox 4.0+ in Safe Mode by holding the '''option''' key while starting Firefox.
* On Linux you can open Firefox 4.0+ in Safe Mode by quitting Firefox and then going to your Terminal and running: firefox -safe-mode (you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
* Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
[[Image:FirefoxSafeMode|width=520]]
''Once you get the pop-up, just select "'Start in Safe Mode"''
[[Image:Safe Mode Fx 15 - Win]]
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''
Thank you. -
I get a black screen when trying to watch a movie on itunes
I have a laptop that I take to work. I am a teacher at a school. When using my school internet, I am able to see my movies in itunes. But, when I take my laptop home and use my internet, I get a black screen when trying to view a movie.
Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
*Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove Cookies" from sites causing problems:
*Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.org/kb/Safe+Mode
Make sure that you allow pages to choose their colors and that you haven't enabled High Contrast in the Accessibility settings.
*Tools > Options > Content : Fonts & Colors > Colors : [X] "Allow pages to choose their own colors, instead of my selections above"
If images are missing then check that you aren't blocking images from some domains.
*Check the permissions for the domain in the current tab in "Tools > Page Info > Permissions"
*Check that images are enabled: Tools > Options > Content: [X] Load images automatically
*Check the exceptions in "Tools > Options > Content: Load Images > Exceptions"
*Check the "Tools > Page Info > Media" tab for blocked images (scroll through all the images with the cursor Down key).
If an image in the list is grayed and there is a check-mark in the box "<i>Block Images from...</i>" then remove that mark to unblock the images from that domain.
Make sure that you do not block third-party images, the permissions.default.images pref should be 1.
*http://kb.mozillazine.org/Images_or_animations_do_not_load
There are also extensions (Tools > Add-ons > Extensions) and security software (firewall, anti-virus) that can block images.
*http://kb.mozillazine.org/Images_or_animations_do_not_load
*https://support.mozilla.org/kb/Images+or+animations+do+not+show -
iPad 2 has a black screen which lights up to a grey black screen when I press the power or home button but I dont see the apple logo. The battery is fully charged and when I plug it in to my computer, I can use iTunes to do everythng except backup the iPad since its passcode locked. Please help me resolve this problem. I don't have apple care
Yup! I've been there! You just have to double-tap the screen with three fingers and the zoom should go back. You have to turn off the feature in Settings>Accessibility>Zoom>and turn the switch off so this won't happen again when you double-triple tap.
-
Satellite C55-A-1N1 - TOSHIBA Addendum error
Hi,
I have a Toshiba Satellite C55-A-1N1 and am having some problems.
When I try to open the TREXlauncher under C:\Program Files (x86)\TOSHIBA\Addendum it comes up saying that there is an error and that the program has closed.
It creates an error log which says that there is no command line argument.
I am wondering what other peoples experiences have been of this and would appreciate any help anyone can give.
Thanks,
AshHello PauPau,
Thanks for the advice. I have noticed on the start menu a shortcut to the same file location mentioned in my question called "Additional Information" which opens up a PDF entitled "Using Windows 8.1".
There is also similar shortcut called "TOSHIBA User's Manuel" which opens a PDF version of the manual for my specific laptop model.
I have also looked at the list of installed programs on the Control Panel and see one for Addendum and the other for Manuel.
I was thinking of saving the two PDF's to my laptop and deleting the two programs from the laptop.
What do you think?
Thanks,
Ash -
Yoga 2 Pro - Black screen when on tablet mode
Hi,
2 weeks Yoya 2 pro out of the box, and get a black screen when reaching the tablet mode (back of the lid touching the back of the laptop base).
I try hanged the setting under power management, with no success. When reaching the tablet mode, I get the same result as closing the lid in laptop mode.
I connect my Yoga 2 to a TV through the HDMI and can see the screen and interact with the black screen (not easy to touch the right spot).
My bios is updated and I have Windows 8.1.
Any suggestion???I found the answer to my problem at
http://forums.lenovo.com/t5/Idea-Windows-based-Tablets-and/Yoga-2-Bios-Update-Crash/m-p/1322487/high...
Now that I found that post I do recall the instructions telling me to turn it off manually when I updated the bios earlier this year. However, the current instructions do not mention it at all, perhaps they should be updated? -
I attempted to use netflix on my MacPro safari 10.5.8, I get a blank black screen when I attempt to watch a video, Has anyone encountered and solved this dilemma?
I also have downloaded netflix "Silverlight" I believe successfully...at least acoording to the popup at the end of the Silverlight download "You have successfully downloaded Silverlight"
-
Why do I get a black screen when i click on a PDF in a web page?
why do I get a black screen when i click on a PDF in a web page? Firefox works as is should.
Hi,
From your Safari menu bar click Safari / Preferences then select the Extensions tab. If you have any installed, turn that off, then relaunch Safari. Try a PDF file.
If it's not Extensions, open a Finder window. Select MacintoshHD in the Sidebar on the left. Now open the Library folder then the Internet Plug-Ins folder. If you see any files such as this:
AdobePDF Browser or Viewer Plug-in
Move it to the Trash, relaunch Safari.
Carolyn :-) -
Since i updated to ios 6 my iphone goes to a black screen when it is in use. I could be texting and 5-10 sec later it goes to a black screen and than to the home page. Its also will be when playing games and so on. Can you please help me with this? I have tried resetting my phone, press the home button 2 time and canceling any running apps and even press home and powering button and still does the same thing. I need help!!!! Any suggestions?????
Try This...
Close All Open Apps... Sign Out of your Account... Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear...
Usually takes about 15 - 20 Seconds... ( But can take Longer...)
Release the Buttons... -
my ipod touch 2g is on black screen.when i connect it to my pc it is not recognizing it.then i opened i tunes and put the phone in dfu mode it says an ipod is detected but it cannot be restored error 1600.plz help me...
Error 1604
This error is often related to USB timing. Try changing USB ports, using a different dock connector to USB cable, and other available USB troubleshooting steps (troubleshooting USB connections. If you are using a dock, bypass it and connect directly to the white Apple USB dock connector cable. If the issue persists on a known-good computer, the device may need service.
If the issue is not resolved by USB isolation troubleshooting, and another computer is not available, try these steps to resolve the issue:
Connect the device to iTunes, confirm that the device is in Recovery Mode. If it's not in Recovery Mode,put it into Recovery Mode.
Restore and wait for the error.
When prompted, click OK.
Close and reopen iTunes while the device remains connected.
The device should now be recognized in Recovery Mode again.
Try to restore again.
If the steps above do not resolve the issue, try restoring using a known-good USB cable, computer, and network connection.
Error 1600, 1601, 1602
Follow the steps listed above for Error 1604. This error may also be resolved by disabling, deactivating, or uninstalling third-party security, antivirus, and firewall software. See steps in this article for details on troubleshooting security software. -
Satellite C55-A-1N1 - How to repair Windows 8.1 after trying Linux?
Hi,
Laptop: Satellite C55-A-1N1
In my infinite wisdom I tried to install Linux in a dual boot scenario like my old laptop. I shrunk the main windows partition in windows 8.1 first and then installed linux to that partition. After rebooting, Linux worked but not windows since I had to disable secure boot and set bios to CSM for linux to load.
After putting secure boot back to on and bios to EFI, windows no longer boots. I tried to repair the windows operating system by running the repair tools from another Win8.1 DVD but they didn't repair the booting. I subsequently learned that holding zero at boot brings you to the hidden recovery partition.........except my doesn't!
So, I have checked the windows and recovery partitions are intact but I cannot get to the recovery partition or repair the windows installation with windows 8.1 repair tools. No, I don't have any backups, other images or system restore options. Clever, aren't I? I only have the original recovery partition (which I can't access) and windows partition to play with. I don't want to lose my OEM Windows 8.1 license...
Any ideas how to salvage this windows installation?
Thanks in advance for any help.You have made the same mistake as many other people. On this forum we have discussed so many times how it works and tried to explain how all this works.
In users manuals is clearly described that every notebook owner should create recovery media (DVD or USB) and this created recovery media can be used for recovery image installation in case that HDD recovery option doesn't work or in case that HDD is defective and must be replaced.
As I can see you don't have this recovery media. Fact is that HDD recovery installation can be started if notebook has factory settings only. After your Linux experiment this option is gone and there is no way to start it again.
What you can do now? I know it sounds stupid now but if you want to install original recovery image you need to order new recovery media and it can be done on https://backupmedia.toshiba.eu/landing.aspx -
My Macbook Pro has a black screen when running in Bootcamp Windows 7. Since I updated the mac side my windows side now starts up with completely black screen - no prompt, nothing, Cap keys still light up as does mouse and DVD drive seems to run.
Will not show up in safe mode, will not show when started from Windows 7 DVD.
I suspect the Mac update wiped out my PC video drivers but can not think of a way to re-install?
Can see the PC volume from Mac side with files.
I've looked at all the online solutions so far and have tried most of them without success. Please help!
Specs:
2009 Macbook Pro, 3.06 GHz Intel 2 core, Max 10.6.8.
Model Name: MacBook Pro
Model Identifier: MacBookPro5,2
Processor Name: Intel Core 2 Duo
Processor Speed: 3.06 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 6 MB
Memory: 4 GB
Bus Speed: 1.07 GHz
Boot ROM Version: MBP52.008E.B05
SMC Version (system): 1.42f4
Serial Number (system): 7302300GANE
Hardware UUID: B2D4B4B4-CD92-5C7A-BDC2-527D30DD8DF3
Sudden Motion Sensor:
State: EnabledEDIT: RESOLVED
For anyone else who finds their way here like I did, this link did it for me: https://forums.geforce.com/default/topic/527599/windows-8-issues-solved-please-r ead-if-you-39-re-having-black-screen-and-or-flickering-/
Specifically, the posts by Dunsany and valkyr did the trick. I booted in safe mode, uninstalled and deleted the Nvidia driver, disabled automatic driver installation, and restarted normally. I then manually downloaded and installed the previous Nvidia driver for my graphics card (which at the time of this writing was 335.23, rather than the latest which was 337.88), and everything is now bueno!
Two hiccoughs along the way: First, when I tried to uninstall the Nvidia driver the first time, when I restarted I got the login screen (which was a good sign), but it quickly went black again. I powered down, restarted in safe mode again, and repeated the uninstallation process, and it worked the second time. Second, when I started the manual install of the 335.23 driver, the computer played a sound similar to the one for disconnecting a USB device, and the screen went black. I'd seen a lot about trying to increase the brightness (though it hadn't worked up to this point; but if you haven't tried it yet, might as well); I tried it, and it worked! So far I'm back up and running. [/fingers crossed]
Hope this helps someone else! -
Black screen when opening in .pdf
I'm having problems with opening the C5-project in .pdf. Some people get a black screen when opening the .pdf file (version 9 or higher), most of the time it goes well, but 1 out of 10 times it doesn't work. I have know idea what could be the cause of the black screen (use of laptop?).
Now it is impossible to send this project to our stakeholders, because I don't know whether it works or not.
Does anyone recognize this and knows why this happens, and how to solve this?There was a recent patch released by Adobe for Captivate 5 that addressed a similar black screen issue in Captivate SWFs.
You can get the patch here: http://www.adobe.com/support/captivate/downloads.html
It may turn out to fix your issue as well.
Maybe you are looking for
-
Need Advise and Suggestions-Oracle 10g
Hi, I have been working on databases as DB developer(mainly PLsql)--Oracle 10g Recently,i have joined in a particular position where I have been asked to find out areas where improvement is necessary / or areas where improvement or changes would help
-
E-MU 0202 - unsuccessful firmware update.
I have E-MU 0202 usb interface and I tried to update firmware from 4 to 8th version. When i did it, the card became unable to boot - the "power" indicator blinks, I can hear clicks in headphones as if card reboots over and over again. Windows can't d
-
Have an iphone4...what would happen when I connect my 3G to itunes?
I have changed phones to the iPhone4 but still own my iphone 3G. I want to use it as basically a 'gaming' console and leave all the apps on it that were there before the transfer. However, I failed to unsynch some things (like photos) that I can't ma
-
When I try to preview a movie on my laptop, the screen comes up and it is just black - it's not showing the preview. Are there any settings I need to change?
-
Hi I want to add a managed link into my rich text field so that the link in the Rich Text Field points to an item in a list of links. When the user clicks on the link in the rich text field, the page pointed to by the item in the list of links is di