Satellite C55T: Win 7 does not recognize LAN and WLan card

I have a problem.
Ive downgraded my Toshiba Satellite C55T-A5222 to Windows 7 64-bit and he didn't install many drivers.
The windows didn't recognize my network connection and he didn't install my wireless driver.
Maybe I need a chipset driver but I didn't find any drivers for windows 7.
Please help me!

If Windows 7 did not recognize the LAN and WLan card, you did not install proper drivers.
Satellite C55T-A5222 is US notebook model.
The drivers can be downloaded from this Toshiba US support page: [Satellite C55T-A5222|http://support.toshiba.com/support/modelHome?freeText=1200005866]
Here choose Drivers /& Updates and the filter by Windows 7 64bit (on the left)
Now you should get all Win 7 64bit drivers for the Satellite C55T-A5222

Similar Messages

HT201253 iPhone 5s is not recognized by iTunes - when I connect my iPhone, iPhoto opens and the phone begins charging but iTunes does not recognize it and I cannot sync. Any advice?

when I connect my iPhone, iPhoto opens and the phone begins charging but iTunes does not recognize it and I cannot sync. Any advice?

Howdy AndieKanaras,
It sounds like your iPhone is being recognized everywhere but in iTunes. I would use the troubleshooting for that issue in the following article, named:
If you don't see your connected device in iTunes for Mac
Thank you for using Apple Support Communities.
All the very best,
Sterling

FCP X does not recognize projects and events on USB drive after a time machine restore of the MBP macintosh disk

FCP X does not recognize projects and events on USB drive after a time machine restore of the MBP macintosh disk.
I upgraded from an i5 to an i7 15" MBP and restored my files using my time machine backup. All seemed to go ok, except I had to use the migration assistant because on the initial boot the MAC didn't recognize the backup database on the USB device. MAybe this is a hint.
Since when I start FCPX it too cannot finnd the project or event directories.
Before my upgrade, I had a choice of files either on the Macintosh disk or the 2TB USB disk.
Now only files on the Macintosh are accessible to FCPX. The USB drive is visible under events and project but it finds no projects or events.
Please help if you can.
Thanks
Barry

Thanks... alas no one has responded.
I think I have the structure that you are recommending.
I have a root level directory (Final Cut Events) with the files in them.
The puzzling thing is that it used to work before the migration!.
Anyway I'm going to move the contents to the root and see what happens.
On a slightly different note...
I also posted a question about CPU utilization. Can I ask a question or two?
While rendering a short clip, I noticed burst of disk activity when the render started (likely loading the media files into ram since I have about 4Gigs available, then almost no activity while the render is happening, then more disk activity when its done.
However the cpu activity is not as high as I would have expected since rendering requires a lot of cpu.
What is your experience? I know some render is done by the GPU, but in my older i5 the CPU was about 100%, now in my i7 its about 50%.
Please look at the attached utilization for CPU and disk activity.
Thanks for any thoughts... Barry

Updated the iOS and now my iPhone 4 will not work and shows the usb with an arrow to iTunes. iTunes on my computer does not recognize it and will not sync it!! I hate being with out my iPhone

I recently updated to the new iOS through my computer with my iPhone 4 pluged in via USB. It has shut down my phone and just shows the iTunes icon with the USB cord to plug in. When I try to sync my phone with the computer iTunes does not recognize it!! So now my iPhone is useless and I really need it back to working order!! Please help......Hilda

Hello Hilda Louise
Start with the article below to get your iPhone to be recognized in iTunes again. Then you will probably need to restore it to get it back up and running.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
Regards,
-Norm G.

Java 1.6.0_05 does not recognize first and last property in jnlp file

Hi
Has anybody else seen this?
The jnlp file contains five properties, but the JRE does not recognize the first nor the last property.
It has been working great since 1.4.2, through 1.5 and 1.6 until 1.6.0_05.
<property name='bog' value='%2fdata%2fkirkeboeger1892%2f'/>
<property name='opslag' value='aa001/AB/007/0000a-A.Jpg,aa001/AB/007/0002a-F.Jpg,... </property>
<property name='sessionId' value='ed0l5n55yu2h04alvqxdpbn3'/>
<property name='service' value='http://ao.sa.dk/LAView/ImageServer/Service1.asmx'/>
<property name='titel' value='1908+-+1924%2c+Agerskov%2c+N%c3%b8rre+Rangstrup%2c+Haderslev'/>The 'opslag' property is much longer, so I cut it off to make it more readable.
Pressing 's' in the console gives me this
Dump system properties ...
awt.toolkit = sun.awt.windows.WToolkit
file.encoding = Cp1252
file.encoding.pkg = sun.io
file.separator = \
http.auth.serializeRequests = true
https.protocols = TLSv1,SSLv3
java.awt.graphicsenv = sun.awt.Win32GraphicsEnvironment
java.awt.printerjob = sun.awt.windows.WPrinterJob
java.class.path = C:\Program Files\Java\jre1.6.0_05\lib\deploy.jar
java.class.version = 50.0
java.endorsed.dirs = C:\Program Files\Java\jre1.6.0_05\lib\endorsed
java.ext.dirs = C:\Program Files\Java\jre1.6.0_05\lib\ext;C:\Windows\Sun\Java\lib\ext
java.home = C:\Program Files\Java\jre1.6.0_05
java.io.tmpdir = C:\Users\MAJ-BR~1\AppData\Local\Temp\
java.library.path = C:\Program Files\Java\jre1.6.0_05\bin;.;C:\Windows\Sun\Java\bin;C:\Windows\system32;C:\Windows;C:\Program Files\Java\jre1.6.0_05\bin;C:\Program Files\Mozilla Firefox;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;"C:\Program Files\Java\jre1.6.0_05\bin"
java.protocol.handler.pkgs = com.sun.javaws.net.protocol|com.sun.deploy.net.protocol
java.runtime.name = Java(TM) SE Runtime Environment
java.runtime.version = 1.6.0_05-b13
java.security.policy = file:C:\Program Files\Java\jre1.6.0_05\lib\security\javaws.policy
java.specification.name = Java Platform API Specification
java.specification.vendor = Sun Microsystems Inc.
java.specification.version = 1.6
java.vendor = Sun Microsystems Inc.
java.vendor.url = http://java.sun.com/
java.vendor.url.bug = http://java.sun.com/cgi-bin/bugreport.cgi
java.version = 1.6.0_05
java.vm.info = mixed mode, sharing
java.vm.name = Java HotSpot(TM) Client VM
java.vm.specification.name = Java Virtual Machine Specification
java.vm.specification.vendor = Sun Microsystems Inc.
java.vm.specification.version = 1.0
java.vm.vendor = Sun Microsystems Inc.
java.vm.version = 10.0-b19
javaplugin.proxy.config.type = direct
javawebstart.version = javaws-1.6.0_05
jnlpx.heapsize = 64m,128m
jnlpx.home = C:\Program Files\Java\jre1.6.0_05\bin
jnlpx.jvm = "C:\Program Files\Java\jre1.6.0_05\bin\javaw.exe"
jnlpx.remove = false
jnlpx.splashport = 49557
line.separator = \r\n
opslag = aa001/AB/007/0000a-A.Jpg,aa001/AB/007/0002a-F.Jpg,...
os.arch = x86
os.name = Windows Vista
os.version = 6.0
path.separator = ;
service = http://ao.sa.dk/LAView/ImageServer/Service1.asmx
sessionId = ed0l5n55yu2h04alvqxdpbn3
sun.arch.data.model = 32
sun.boot.class.path = C:\Program Files\Java\jre1.6.0_05\lib\resources.jar;C:\Program Files\Java\jre1.6.0_05\lib\rt.jar;C:\Program Files\Java\jre1.6.0_05\lib\sunrsasign.jar;C:\Program Files\Java\jre1.6.0_05\lib\jsse.jar;C:\Program Files\Java\jre1.6.0_05\lib\jce.jar;C:\Program Files\Java\jre1.6.0_05\lib\charsets.jar;C:\Program Files\Java\jre1.6.0_05\classes;C:\Program Files\Java\jre1.6.0_05\lib\javaws.jar;C:\Program Files\Java\jre1.6.0_05\lib\deploy.jar
sun.boot.library.path = C:\Program Files\Java\jre1.6.0_05\bin
sun.cpu.endian = little
sun.cpu.isalist = pentium_pro+mmx pentium_pro pentium+mmx pentium i486 i386 i86
sun.desktop = windows
sun.io.unicode.encoding = UnicodeLittle
sun.java.launcher = SUN_STANDARD
sun.jnu.encoding = Cp1252
sun.management.compiler = HotSpot Client Compiler
sun.os.patch.level =
trustProxy = true
user.country = DK
user.dir = C:\Users\Maj-Britt\Documents
user.home = C:\Users\Maj-Britt
user.language = da
user.name = Maj-Britt
user.timezone = Europe/Paris
user.variant = As one can clearly see, the 'bog' and 'titel' (i.e. first and last) properties are missing, resulting (bad code - I know) in a NullPointerException.

We also have this problem, but it's not first and last property.
We have 6 properties, and the 3. property is gone.
If I download the jnlp file, the property is there, if I choose show jnlp file in "javaws -viewer" it's not there. Only difference between this property and the working properties is length.
The length is char 255, and the data is base64 encoded.
I worked fine before upgrading to Java 6 update 5.
Anyone any ideas?

Satellite L300 - Windows does not recognize connected device

I have Toshiba L300 Satellite series, PSLB8E. it came with a pre-installed window vista basic version and it was working very good until I decided to upgrade it.
I took it to a computer shop for an upgrade to window ultimate.
This version worked very well for a few weeks so until I got a message on the screen that said: " I must get a genuine copy of windows".
Since from that time I started having problems with my usb ports, my computer could not detect any thing I connect to it (usb, printer, mouse etc) it only worked with modem, sometimes it would open my external hard drive but it did not install its drivers.
I then decided to buy a window 7 home basic but instead of this problem going away it got worse as my usb ports stopped completely from working.
I have tried every trick I can think of but nothing worked. the problem I have is that I do not have the original disc of window vista
Anyone please help!!

I agree: installation of Windows 7 drivers is very important to get all the devices working properly. Windows 7 is much better as Vista OS and I dont see any reasons why your Sat L300 should not work properly with this Win 7 OS.
I recommend you to install the Windows 7 system again by doing completely clean install.
After that, download all the Toshiba Win 7 drivers from the Toshiba EU driver page.
Very important are the drivers like Value Added Package, Chip Set Utility, Card Reader Controller, Display Driver, LAN driver, WLan, Sound Driver, Storage Manager and touchpad driver

My computer does not recognize ipod and ipod freezes computer

This is how it stated:
Today, I charged my ipod on another computer, like I always do, the itunes is to early (like 4.0) to even recognize my ipod, so on the computer it is only hard drive. So, I used the little green arrow icon in the right bottom corner of the screen, as in ejecting a jump drive.
My ipod is at the main menu. I decide to watch a television show until...all of a sudden, it freezes while it is playing. I press, play and pause again. Now the audio plays, but the screen is frozen. So I press the Menu+Center button and the ipod turns off and the Apple icon appears. Usually when i do this, the menu comes back on. But this time, the screen said somethinglike "You must connect your ipod to itunes and restore it..." in about 5 different languages.
I get home, plug it in to my computer, I try to pull up itunes, it does not come up until I disconnect my defected ipod. Everytime I plug my ipod in, the screen just shows the ipod charging in the gray, dark version--no green lighting battery, its all gray and black. And by the icon in the corner, the ipod does not have a low battery...
Can someone help me?

Have you checked
http://discussions.apple.com/thread.jspa?threadID=461952&tstart=15
I followed the 2-step method. It worked for me.

HT1414 My child's itouch is locked out. When I connect to computer, iTunes does not recognize it and the error message says I have to unlock the device? I can't unlock the device because password is unknown? How do I reset if I don't know the password?

My child's iPod touch is locked. No one knows the password. I have tried connecting to iTunes but since itouch is locked, iTunes will not recognize It. How do I unlock the itouch? The hard reset does not work either.

iOS: Unable to update or restore

I get invitation to accept Firefox 4 but it says that it does not recognize Kaspersky and therefore I can't use it because that is my security company. Any chance that Firefox will soon accept Kaspersky?

Why is the Kaspersky security system not accepted by Firefox 4?
I like to keep up to date on the latest versions but I can't upgrade to 4 if it does not accept Kaspersky since this my primary security program.

Your general security software will still run outside of Firefox. Kaspersky has posted an article on exactly what you lose in the way of security add-ons when moving to Firefox 4:
[http://support.kaspersky.com/faq/?qid=208284261 Kaspersky Lab products and Mozilla Firefox 4.0: co-working peculiarities]
I don't think Kaspersky has posted a date when its add-ons will be updated for Firefox 4.

Unable to sync with computer. does not recognize Iphone and wants me to restore factory settings. Tried restoring several times in past but problem persists.

Unable to sync iphone4. iphone not recognized. wants me to restore factory settings. I've done that several times and problem persists.This has been an issue sunce buying the phone.

Hello @dazegoneby,
I understand that your HP Pavilion p6-2220t Desktop PC running Windows 7 used to connect to your home network without an issue, but recently it does not recognise the network. I am providing you with an HP Support document: Troubleshooting Your Wireless Network and Internet Connection (Windows 7), which has steps to help resolve issues such as this. Now I am not recommending that you do the step that asks you to reset up your router as you have other devices that are working fine so that would not be the issue.
If the above document does not resolve your issue could you please re-post with either a screen shot of your Device Manager showing what is listed in Network Adapters or re-post with which wireless card you have.
Thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

My grandson bought a used ipod....we want to use our library to download. My computer does not recognize it and will not let me sinc. The previous owners name comes up.... help

My grandson bought a ipod from a friend. We want to use our itunes music. It shows the old owners name and does not give us an
option to download any music.
Any help?
The previous owner cleaned out all the music, videos and pictures.
But not sure how to restore back to factory.

Hi,
Welcome to Apple Discussions.
Sorry to say that you cannot use an iPod Touch as an "external" drive, unlike the "Classic" etc. which I believe have this feature.
To transfer your library you will have to back it up to disc(s), a different type of HD or use a network to send the files over.
Good luck,
Dud.
Message was edited by: Duddo

Problem with Call Library Function. Want to pass a string and return a string, but my compiler does not recognize "CStr" and Labview does not recognize my "char *function()" callout

Hi, I'm trying to use a .DLL I wrote in Visual C++ .NET. The Call Library Function generates a function prototype of "CStr Parser(CStr arg_raw)"
but my compiler won't accept this. So I change it to how C normally deals with strings "char *Parser(char *arg_raw). Now the Call Librafy Function does not find "Parser" in my .DLL though it is definitely there!
Help!
-Fong

Hello
You will need to include extcode.h in your C file. You can find this under ..\LabVIEW\cintools folder.
The include has all the defines you will need.
Bilal Durrani
NI
Bilal Durrani
NI

Iphone 3gs in safe mode and computer does not recognize it and shows as "new hardware"

My iphone 3gs is in recovery mode. And when i plug it in to my computer it shows up as " found new hardware". Now i reinstalled itunes many times. trying different versions of itunes as well. I have tried many things and my computer just wont recognize it. using a diffrent computer is not an option. What can i do to my computer to try and get this thing to connect??

When you say you have reinstalled iTunes many times, have you followed the directions Apple gives for uninstalling and reinstalling iTunes and all it's ancillary applications and processes?
Apple's documentation on the process can be found here:
Windows XP: http://support.apple.com/kb/ht1925
Windows Vista or 7: http://support.apple.com/kb/HT1923
Mac OS X: http://support.apple.com/kb/HT1224
I hope this helps.

My 8GB Ipod touch is stuck at the connect to itunes screen, and when I plug it in my itunes does not recognize it, and a box appears that says usb does not recognize device. How can this be fixed?

How can I fix my ipod coming up as USB cannot recognize device?

Did you find a solution?
My touch is doing the same thing.

Apple TV does not recognize ID and password. Keeps saying its wrong audits not

I did an update of Apple TV and restored my settings. When going through set up it comes to the Home Sharing screen. When I go to Home. sharing set up it asks for Apple ID. And password. I keep putting them in and it keeps saying they're wrong. I have verified the ID and password accuracy multiple times. I have my MacBook, iPhone 4S and iPad sitting here as well and home sharing is on with ll of them. Stamped

Apple TV has a software bug.
Apple TV asks for your mac ID but in reality it wants your registered email address (not a .mac email but your alternate email address you used when setting up your itunes account.
I could not purchase any apple tv movie content because it kept saying my email address was wrong when logging in under my .mac account. There are a few issues with this...
#1) Why can't I enter a space in my apple ID on Apple TV when I can in iTunes where I can use that ID to purchase content?
#2) As mentioned above... do not use your apple ID when you login on apple TV... use your email address and password used to setup that first .mac account.
#3) Credit card info or pay options must be setup in advance on your computer to be able to purchase content from the Apple TV menus.

Satellite C55T: Win 7 does not recognize LAN and WLan card

Similar Messages

Maybe you are looking for