Satellite C55T - Windows 10 media creation tool closes after Creating Windows 10 Media

This morning I was trying to do a Windows 10 upgrade on our Satellite C55T using the media creation tool at - https://www.microsoft.com/en-us/software-download/windows10 After reaching 100% of the upgrade point of "Creating Windows 10 Media" the program just closes completely and nothing else happenes, no error message, just closes like I never started it to begin with. I tried running the program again and the same thing happens. Hopefully someone knows of a solution to this, any ideas anyone ? Thanks !

ok, not being extremely familiar with messing with ISO files I finally realized what I was doing wrong. I had originally downloaded the Win 10 ISO file direct to a DVD and it would not install, then I realized I needed to download it to the hard drive and then burn it onto a DVD. Once I did that I was able to install it on that computer successfully ! This method (ISO download) was used because I was unable to get a reservation app to appear and I was also unable to install via the Windows 10 media installation tool.

Similar Messages

Windows 10 media creation tool closes after creating installation media

I have just upgraded my Windows 8 PC to Windows 8.1. Now I wanted to upgrade it to Windows 10, and for that I downloaded the media creation tool and used the "UPGRADE MY PC NOW" option. It downloaded fine and after the download it went to Verification and then to Creating Installation Media for Windows 10.After it was complete to 100% , the Window immediately closed and nothing happened. Any help?

I would create the bootable media and upgrade using that. You will need a 8gb or larger flash drive, once created you boot from that and start the upgrade process.

Flash Professional CC will close after creating a shape

I'm trying to do a proejct for college and every time I createa ashape it will close down. Anyone know what to do about this?

first, reset preferences -
after effects: http://helpx.adobe.com/after-effects/using/preferences.html
flash: http://helpx.adobe.com/flash/kb/re-create-preferences-flash-professional.html
illustrator: http://helpx.adobe.com/illustrator/using/setting-preferences.html
indesign: https://forums.adobe.com/thread/526990
photoshop: https://forums.adobe.com/thread/375776
if that fails, restart your computer in safe mode and test flash:
if same problem, uninstall, clean (Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6) and reinstall.
if no problem, you have some program/process causing the problem when running in regular mode. use your activity monitor (mac) or task manager (win) to close non-os processes until you find the culprit.

Toshiba Satellite C55t-B5230 part no. PSCMQU-00U006

I have a Toshiba satellite C55t-B5230 and it was working fine just this morning but i opened it just now and it says "Reboot and select proper Boot device or insert boot media in selected boot divice and press a key" I was wondering is there any way to gix thos without the disk because it never came with one

The data for the recovery media comes on the hard drive. If you want recovery media, you need to create backup recovery media using the pre-installed Toshiba Recovery Media Creator software. I know you can't do that right now, but hopefully it can get fixed without it. Try following these suggestions:
What can I do if my Windows 8 laptop won't start?
- Peter

External subwoofer not working with Satellite C55t-A5222

When I plug in an external speaker system into my laptop, the speakers work, but the subwoofer does not. I have tried two different speaker systems and have the same problem. I know the subwoofer works, because when I connect an ipod or iphone to the speakers through bluetooth, the sound is great. How can I get the same sound when the speakers are connected directly to my Satellite C55t-A5222 laptop? I have verified that I have the latest driver for my sound.

I was having the same problem, so I called Customer Service. The Tech diagnosed the problem with the Realtek HD Audio Manager. I had upgraded to Windows 8.1 from 8.0 so some of the drivers and devices my not have installed correctly, he guessed.
He went Control Panel > Hardware and Sound
Under Devices and Printers he selected Device Manager>Sound, video and game conroller>
He seleced Realtek High Definition Audio
He went to the Driver Tab and selected 'Uninstall"
He uninstalled the Realtek Device and rebooted my laptop.
After the Reboot, he went back to Control Panel>Hardware and Sound and went all the way at the bottom selected "Realtek HD Audio Manager. I don't recall if it was there before, but I assumed it wasn't since he was not able to find it previously.
The then opened up the Realtek HD Audio Manager and selected DTS Tab and clicked the 'Launch' Button. He then selected 'External Speakers and 'Viola' My External Cyber Acoustics CA-3602 2.1 Speakers including the Sub Woofer were 'shaking' my office again! YEAH!!
He said that each time I want to use the External Speakers and Headset I might have to select it in the Realteck HD Audio Manager if it is not working! THANKS "SAM" (my Toshiba Tech Guy's psuedonym)
Hope this helps you guys

Toshiba satellite c55t-A5123 . Does not boot any devices.

I have accidentally formated the pre-installed OS in my laptop. Now I try to reinstall it again with win8 installation disk but it does not boot the DVD . i tried to make a bootable USB too but same thing happened. Anyone here can help my problem?
Is there any way to solve it.. Please I really need your help . Thanks in advance :-)

Satellite C55T-A5123
Best to restore the hard disk to its original out-of-the-box contents using Toshiba recovery media. All the drivers and utilities are properly installed.
If you failed to create recovery media, obtain it from Toshiba. Scroll down to Get Recovery Media here
See the instructions in the section Restoring from recovery media, which begins on p. 56 of the User's Guide.
Satellite/Satellite Pro C40/C50/C70 - A Series User’s Guide
-Jerry

Satellite C55T: Win 7 does not recognize LAN and WLan card

I have a problem.
Ive downgraded my Toshiba Satellite C55T-A5222 to Windows 7 64-bit and he didn't install many drivers.
The windows didn't recognize my network connection and he didn't install my wireless driver.
Maybe I need a chipset driver but I didn't find any drivers for windows 7.
Please help me!

If Windows 7 did not recognize the LAN and WLan card, you did not install proper drivers.
Satellite C55T-A5222 is US notebook model.
The drivers can be downloaded from this Toshiba US support page: [Satellite C55T-A5222|http://support.toshiba.com/support/modelHome?freeText=1200005866]
Here choose Drivers /& Updates and the filter by Windows 7 64bit (on the left)
Now you should get all Win 7 64bit drivers for the Satellite C55T-A5222

Satellite P300 - Windows live messenger says I don't have a webcam

I just bought the laptop yesterday and whenever I try to make the webcam work it wont even let me click on the show my webcam button and it says I have no webcam but its built in.
What shall I do?

Hello
In MSN messenger there is option under TOOLS > Audio and Video setup. Please start it and let me know which message is shown there.
I have checked it on my Satellite P200D and suddenly there was message: close application that may use webcam. After doing this start setup again.
I tried everything but nothing helped. At the end I have downloaded and installed Webcam driver again.
After notebook restart cam is recognized properly and I can use it in MSN without any problems.

Send message windows doesn't close after sending attached PDF from Acrobat

I have several forms that I have created in Acrobat 9 Pro. These forms have a button set to submit to an email address. After filling out the form, and clicking on the submit button some, but not all, of users with Outlook 2007 are having a problem with the send message window not closing after sending the email.
When they click the button the email is created with the form as an attachment. When they click the send button in the send message window the message goes into the outbox, and then gets sent no problems. But the send message window never closes after sending the message. So my users think the message never got sent.
The computers that I am seeing this on all run XP, have Outlook 2007, and use Acrobat Standard 8. On some computers it works just fine, and on others it has the problem. It must be a setting somewhere but I can not figure it out.
Closing the window by clicking on the "X" is no problem, but many of my users are pretty new to computers know very little about them. So something like this causes them a lot of problems.
Any suggestions?
Trudy

My apologies, when I said "instance" I meant window.
I also just realized the new window and then closing behavior only happens when the iTunes link clicked is in an email in Mail (presumably, this would also happen in other desktop email clients). When an iTunes link in Safari is clicked, the "iTunes loading" white page appears for a moment and then Safari navigates back to the page with the link. However, that isn't working properly, either. The white page continues to "load" indefinitely and never returns to the previous page.
Here is a link:
http://www.imogenheap.com/buy/

A pop-up window requiring a response does not close after being responded to.

A club membership database uses pop-up windows to request preferences for displaying information on the database. The window should close after the preference is saved. This closing occurs with Internet Explorer, but not with Firefox. The requested information cannot be retrieved unless the pop-up closes.

Force Quit .
Press command + option + esc keys together at the same time. Wait.
When Force Quit window appears, select Safari, if not already.
Press Force Quit button at the bottom of the window. Wait.
Application will quit.
If this does not help, press the power button for 7 or more seconds.
Computer will shut down.
Restart.
Hold the shift key down and launch Safari.
Best.

Satellite C55T Digitizer Crack

I have a Toshiba Satellite C55T-A5222 and the digitizer has been cracked/busted pretty good. With the cracked digitzier the computer will not let you move the mouse or type on the keyboard, I'm assuming it is hung up because of the cracked screen and thinks your continuously touching the screen so it is keeping the unit busy and will not allow any other input actions via mouse or keyboard, could be wrong on that but that is my guess. Well the repair is high so i figured I would take the digitizer off completely and just use it as a regular unit. I removed the glass and put the plastic part back on and it boots back up but still no actions can be done via mouse and keyboard. So I took it back part and unplugged the digitizer cable that connects to the motherboard and back on and still i can't use mouse or keyboard. Is there anyway to work around this so i can use the unit and completely disable the motherboard from seeking for this is digitizer technology or is it one of them things where it was made to not work without? Seems like you should be able to remove it somehow. Any comments? Anyone already done or tried this? Thanks
Solved!
Go to Solution.

your support site is here
so your asking if you can replace the touch screen with a regular non-touch screen and have the computer work without the touch screen feature? I would think so but I have no experience with this so I'm going to let others chime in with their input.
L305-S5955, T9300 Intel Core 2 Duo, 4GB RAM, 60GB SSD, Win 7 Ultimate 64-bit

SWF File creation tool for Unifier Custom Dashboards

Hello Everyone,
I am looking for a tool that can allow me to create SWF files to be used for Custom Dashboard. I know that using third-party SWF file creation tools, swf template files can be created and we can build custom dashboards in Unifier.
Can anyone provide me with list of SWF file creation tools that you have used for Unifier dashboards.
Thanks

The only tool that the SWF Dashboards were designed to work with is Xcelcius. Please bear in mind that only legacy Skire customers that had created SFW dashboards have the ability to use SWF dashboards.

Photoshop Elements Photo Bin No longer stays open while working on photos but closes after each tool selection.

In Elements 13.1 on a Mac running Yosemite 10.10.2, the "Photo Bin" no longer stays active below the photo work area but closes after each tool action. The Bin used to stay open with all photos visible throughout, which was very helpful. Couldn't find a preferences option for this. Any help?

Hi,
It is possible to stop the Tools options automatically opening if that is what you want. You can not have the tools options and the photo bin both open at the same time.
To stop the tools options always opening, go to the options menu and uncheck the auto show tools options.
Brian

Why does the type tool and note tool close my InDesign program? [was: InDesign CC technical]

Why does the type tool and note tool close my InDesign program?

Install the CC Desktop app, or try Help > Updates....
If all else fails, you can try Crash | Launch, selecting Type tool, but there are other bug fixes in the update.

Satellite A500 - Windows doesn't start, how to recover now?

Hello guys,
Recently , a week ago, i bought a new Satellite A500- 1HK. I installed everything and after i installed Office 2007, after the restart my PC stack on Windows 7 Logo. Pls notice that at this time a had an external HDD connected. That was my first mistake.
My second mistake was that after 5 minutes of inactivity i powered off my PC (not shutdown) and that was it. My PC totally crashed.
My third mistake was that i did not make recovery disks from the beginning and unfortunately i dont have recovery CDS. The recovery program its on a separate partition of my laptop.I tried to solve the problem as follows: I boot the PC, pressing F8 and i went to the repair menu. At the first time after the repair nothing was happened. after this i tried to proceed to the recovery option. i choose the US language and pressed enter. Nothing was happened. the screen shows an error saying: You must log in to access sytem recovery Options. If you are having trouble logging in , please contact your computer administrator for assistance. Click ok to restart the computer.
The only thing i imagine is that the recovery partition also crashed. What can i do now? I alrweady ordered the Recovery CD's from Toshiba and expecting them during the 2 next weeks.
What is your opinion . What happened? I hope that the rexcovery programm will work with CD'S and i will face no problem any more.
Thank you.
Leonardos

Hi buddy,
> I alrweady ordered the Recovery CD's from Toshiba
So in my opinion your question is already answered. Jus wait for the Toshiba recovery disk to restore factory settings.
If HDD recovery doesnt work, your only option is Toshiba recovery disk and now its time to wait for it. Im sure you will get the disk as fast as possible.
Good luck! :)

Satellite C55T - Windows 10 media creation tool closes after Creating Windows 10 Media

Similar Messages

Maybe you are looking for