Satellite C650-197 Built In Microphone and Jacks not working

As the title, I tried to use the my microphone that comes inbuilt on this model (integrated VGA Web Camera with built-in microphone) and found its not working. Tried to plug in an external microphone via the mic jack and still not recording.
I cant seem to find the drivers for the inbuilt or the jack anywhere.
Any ideas?

Hi
> I cant seem to find the drivers for the inbuilt or the jack anywhere.
Such drivers dont exist. The sound card driver controls everything.
I think you should firstly start the webcam software and should test the mic because the internal mic is a part of the webcam.
The webcam software provides an tab; settings and properties. In one of these tabs you would find settings for audio.
There you could increase the mic volume and could record small audio session.
Additionally I recommend checking the settings in control panel -> sound.
Be sure that mic volume is set to max. Don't forget to check hidden and disabled devices there...

Similar Messages

  • Microphone and Webcam not working/We​bcam not recognized by YouCam

    Hello,
          I have a dv7-6c95dx and my YouCam  program tells me that it does not recognize my integrated webcam. I have read all of the webcam forums on this site and clicked on all of the links people have posted in the forums. I have uninstalled the CyberLink YouCam program and it still comes up with the same messages. The webcam also does not show up in my device manager. The microphone is malfunction as well, it will not work any any programs including skype. 
         I have heard that the webcam can come unplugged internally, will that also cause the microphone to stop working? I have run out of options and I do not want to pay anyone to fix it. I would appreciate any advice on this subject. 

    Hi DillOrNoDill,
    Thank you for visiting the HP Support Forums and Welcome. I have read your thread on your HP Pavilion dv7-6c95dx Notebook and sound and microphone issues and Webcam not working correctly. I would be happy to assist if needed. Try these steps first.
    1. Right click speaker icon (right hand corner)
    2. Select Playback devices
    3. Right click Speakers
    4. Enable it and set as Default
    5. Click Apply/Ok
    You could also try Microsoft troubleshooter located on your Notebook.
    Here is a document on WebCam troubleshooting. The Webcam will be listed in your device manager under Imaging devices. You should be able to click the action button and scan for new hardware.
    Hope this helps.
    Thanks.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • Satellite C650-010 - Built in microphone not working

    built in microphone did not work after three weeks. I tried to install new driver software from Toshiba website, but did not help. External webcam with microphone works well.
    Yesterday microphone worked for ten minutes but then mute again.

    Hey,
    > I tried to install new driver software from Toshiba website
    What driver software you have installed?
    The microphone belongs to internal webcam so you have to reinstall the webcam driver if internal microphone doesnt work properly.
    > but then mute again.
    Does this mean the internal microphone is muted? Please check the Windows sound settings if the microphone is listed properly under recording devices and set as default device.

  • Dv7-6059eo, microphone and camera not working, have re-installed the system, updated drivers etc.

    Hello. A couple of days ago, my microphone and camera suddenly stopped working. When I started up my camera in Skype, it said "Please open YouCam" or something like that, and when I did, it told me to update it. So I did. Then it told me that I had to uninstall the current version of YouCam. When I did and tried to install the update, it said something like "no video device detected".
    After updating drivers and un-/installing things, I recovered my whole computer to fabric options. Still not working. So I suspect that it might have something to do with the hardware. Although I don't know what should have caused it, as it just happened randomly in the middle of the day.

    Brad K59 wrote:... Photo Booth cannot recognize my built in Mac camera (ISight)...
    iSight camera failure after OS X 10.9 Mavericks update
    Brad K59 wrote:... I am missing the com.apple.photobooth.plist file ... how do I rebuild the file? ...
    Try the User Tip suggestions first.  Your system does need a plist, but a properly working OS X automatically generates any needed plist files when you launch the associated app (if its plist does not already exist.)

  • USB Microphone and Vista not working

    I've installed the Captivate 4.0 trial everything is fine, but it's not recgonizing my logitec headset with microphone and the Vista operating system. I did a search and some peoplre recommend going to this site
    https://share.acrobat.com/adc/document.do?docid=a14e1bd9-dc10-4456-9cd2-44489809b78e
    However, I can't download this file from here it either say it doesn't existing try to get to register with Acrobat.com which I don't want
    Were else can I get this file to fix this problem

    Hi there
    Have you tried what is oulined at the link below?
    Click here to view
    Cheers... Rick
    Helpful and Handy Links
    Captivate Wish Form/Bug Reporting Form
    Adobe Certified Captivate Training
    SorcerStone Blog
    Captivate eBooks

  • Microphone and webcam not working on Yoga S1 after windows 10 update

    I have to admit I never tried the webcam since I got my Yoga which had win 8.1 originally installed on it, but with the update to windows 10, I'm trying more things out. I did install the camera driver from http://support.lenovo.com/us/en/products/laptops-and-netbooks/thinkpad-yoga-series-laptops/thinkpad-yoga?c=1  but no luck.I dont even see any kind of camera in device manager. The camera app just says "something is wrong" amd closes. I tried Skype and it also could not detect a working webcam. After installing  windows 10, I did try Cortina and it had me go into microphone setup and it was working. However after subsequent updates, it no longer works. The micropphone levels are ll the way 100%, but when I try to setup the mic, I never see the level meters move when trying the speech test dictation,. Ive installed the Conexant drivers in the the above link, and also uninstalled them and tried to go back to what are the default microsoft drivers, neither seem to wor  

    Hey 22d05da3,
    Hey I see that you're having an issue with the webcam and microphone.
    This could be a hardware issue knowing both of these features are in the same module
    But first,
    Can you go to device manager then go under the section that says imaging devices and tell me if the webcam shows up under there. Also, check and see if there's any type of exclamation mark next to it.
    Next, Go to the sound controllers section also and let me know if you can see the microphone underneath that.
    Now, these two don't have drivers to install from the website. What you can do is uninstall these drivers from the device manager then restart your Notebook. It should install the drivers after you restart.
    Also, if this doesn't work you can do a driver recover from the software. Here is a document to show you how to do that.
    http://goo.gl/XjqLp
    Go down to the section that says "Reinstall the original webcam program that came with your computer".
    If any other issues come up before this like you can't find the drivers in the device manager. Go to the section on that document that says " Webcam is not listed in the device manager ".
    THX

  • Satellite Pro A200-18P - microphone / headphone jack not working with Vista

    Hi,
    I have installed Windows Vista onto this laptop which was originally an XP, but I have not got the headphone jack working.
    How do I turn it on or do I have to download it from toshiba website?

    Hi
    First of all you have to check if there is an special BIOS for Vista.
    As far as I know some A200 series needs BIOS which was released especially for Vista OS.
    I think the notebook needs Realtek sound driver.
    Therefore in control panel you should see the Realtek HD audio manager.
    Go there and you will see the mic and headphone jack on the right.
    Click right there and check if there are some settings which have to be enabled.

  • Microphone and Audio not working on Windows 7 (x64)

    Hi.
    I uninstalled Windows 8 two days ago, trying to put again, on my bootcamp partition, Windows 7. The first time I tried the GPU just wouldn't work, so I installed everything AGAIN to make it work fine. I downloaded those "iMac Late 2009 for Windows 7 Drivers" from apple.com and it was pretty successful: GPU was working again and so did my native resolution, 2560x1440 (I have a 27" Late 2009 iMac with i3). When I tried to talk to one of my friends on Skype I found out the (internal) microphone wasn't working, and so did the audio (also internal). So I installed EVERY drivers I could (realtek, cirrus, bootcamp 3.0, 3.1 and 3.2, I took some drivers from Driver Genius). I don't really know what I have to do!
    Please help me, I'm in a tremendous situation.
    ( sorry for the bad english, I'm italian.)

    Che dice Windows nella finestra dei dispositivi audio? Per me l'errore (su Windows 8) era che diceva "no audio devices are installed". In quel caso bisogna fare right-click nello spazio di quella finestra e selezionare "show disabled devices" e "show disconnected devices". Quando ho fatto quello sono riapparsi sia il microfono sia i parlanti. Spero che ti abbia aiutato in qualche modo.
    (Mi dispiace per il brutto Italiano, sono Australiano)

  • Satellite L500-1WG - Built in web cam is not working

    My built in web cam doesnt seem to be working, I discovered this last week and i've tried a few solutions such as uninstalling then reinstalling the driver but that work.
    Also I delete my system restores to save space so I can't really go back to when it did work.
    I don't think that i've installed any webcam drivers lately so I don't think it was that.
    Help?

    Hmmmm.....what can be done now?
    Generally speaking webcam driver reinstall should help but you have tried it already.
    Which operating system do you use?
    Try to remove web camera application again, clean registry and all entries there, restart notebook and try to install right webcam driver again.
    I really dont know what else you can try.
    By the way: what is the webcam status in device manager?

  • Internal microphone and Webcam not working

    Ive had my laptop for about 2years, i have a Toshiba Sattelite L840
    Ive used skype to call and webcam but for some reason for the past week i havent been able to use it. 
    I checked my drivers installed, the Audio Input and Output have disappeared and so has imaging devices. 
    If anyone could help would be much appreciated, There are no hidden devices under the recording sound tabs, my webcam still lights up but it does not show images.
    Ive also realised that my firewall is down, i click on the use recommended setting but it doesnt do anything
    Please contact me if you know anything about fixing these problems

    I don't actually have any information on that model because that wasn't sold here in the US. This is the Toshiba USA forum, and I believe that's from Toshiba Australia. You should contact them.
    - Peter

  • Toshiba Satellite E45t-B4300 built in microphone not working

    Greetings,
    Today I bought the Toshiba Satellite E45t-B4300. I was trying to use the built in microphone and it is not functioning. The video recorder appears to work fine. After searching around, I decided to download the most recent drivers from toshiba. I uninstalled the old audio device and installed the new drivers. After this process, the microphone still does not function. (Yes, I rebooted, and all standard good practices ) It appears to be listed in the recording devices and enabled. When I try to set it up, it does not detect any audio. Any suggestions would be appreciated. Oh it also runs Windows 8.1.
    Thank you.
    K

    If you can't solve your issue and no one in the community can help, contact support to speak with a tech support agent at (800) 457-7777.
    - Peter

  • Built Flash Video and will NOT show in Hosted Environment

    Built Flash Video and will NOT show in Hosted Environment.
    The files generated work on development machine. I posted the same
    files in hosted environment and flash will not show. I first
    thought it was Vista 64 IE 7 so I switched to XP IE7 and same
    results. Still it is strange the falsh works locally. I am sure it
    is something simple that I am missing. Any help would be
    appreciated. Thank you.
    Stan

    Nickels55, I appreciate the response. Here are the
    interesting facts. I had my hosting provider apply the mime type
    and restart IIS. No flash video. I have Vista x64 Ultimate with I
    think IIS 7 (the default IIS that comes with the OS.) The flash
    video would not show in that environment until I applied the MIME
    and then it WORKED. Yeah! But I still don’t have it working
    on my web hosting provider with server Win2003. I thought it was
    the hosting provider but I posted on my work server Win 2003 and
    changed the MIME with a reset and could not get the video to work
    there either.
    I would like to try another angle here. Again I am using the
    wizard to encode and publish the flash video. Maybe I don’t
    have a settings correct. I can approach this a few ways.
    1.) I can send my video to someone to post on their Win2003
    server and see if they can get it going.
    2.) Someone send me a short 3 second video that they produced
    that they know it works on Win2003.
    3.) Any other ideas? Surely someone in this universe has used
    the flash wizard to encode a video and published to a Win2003
    server. :)
    I guess the other thing to note is when creating the flash
    video I chose no controls (play, stop, pause). I want the video to
    start when someone accesses the page for the first time.
    Thank you for the help everyone.
    Stan

  • How the sound - microphone - and bluetooth devices works in Windows 8.1 Client Hyper-V

    How the sound - microphone - and bluetooth devices works in Windows 8.1 Client Hyper-V
    I would like to get some resources about detailed information on the subject above.
    Any help would be greatly appreciated.
    Thank you,
    carloss

    check this
    Hyper-V in Windows Server 2012 R2 Client Hyper-V Enhanced Session Mode in Windows 8.1
    Starting with Hyper-V in Windows Server 2012 R2, Hyper-V can now redirect local resources to a virtual machine session through Virtual Machine Connection tool. The enhanced session mode connection uses a Remote Desktop Connection session via the virtual
    machine bus (VMBus), so no network connection to the virtual machine is required
    https://technet.microsoft.com/en-us/library/dn282274.aspx

  • Built-in keyboard and trackpad not detected, what happened?

    Hi there,
    I was just using my mac book pro as I always do and suddenly both the built-in keyboard and trackpad stopped working.
    I rebooted the mac book but then I received a message that neither a keyboard nor a trackpad were detected so the system started to look for bluetooth versions of them. I am only able to type this post using an old usb keyboard and mouse I found in my stuff.
    Does anyone have the same problem?
    I am using a Mac book pro 15 inches from 2011 with Mavericks 10.9.2
    Best regards,
    Cicero

    I see that this was a problem many months ago, but I just had the same issue with my 2008 Macbook Pro and I want to post the solution for others who may search here for answers.  My keyboard and trackpad stopped working soon after I downloaded Mavericks; but the OS was not the issue.  The issue is apparently that the ribbon cable, in the battery compartment, connecting the keyboard and trackpad to their internal USB board needs pressure against it.  I had recently (about a month and a half ago) replaced my battery with one from the Apple Store and, at the time, I noticed that it did not fit as snugly as the previous one.  The solution I found (at least for older Macbook Pros) is on the following webpage:
    http://jasonrobb.com/v2/2008/11/24/macbook-pro-unresponsive-keyboard-trackpad-so lution/
    Good luck!

  • My built in i sight is not working please help me

    it worked bout a week and a half to take a picture on myspeace and i tried to see my friends on msn on the webcam and bnothing i cant see my self at all they can only hear me it says configure camera or something like that and something bout quiting an application and my friends see a greenline what can i do guys

    babybella03 wrote:
    it worked bout a week and a half to take a picture on myspeace and i tried to see my friends on msn on the webcam and bnothing i cant see my self at all they can only hear me it says configure camera or something like that and something bout quiting an application and my friends see a greenline what can i do guys
    Welcome to Discussions, babybella03
    (1) If merely restarting your Mac does not correct the problem, try all relevant suggestions from:
      http://support.apple.com/kb/HT2090
    (2) If your iSight problem occurs in more than one app and more than one user account, the reset suggested there often restores proper function of inbuilt iSight.
    (3) However, if after carefully following all the suggestions in the "How to Troubleshoot iSight" article, your built-in iSight still does not work, and if it does not show as a USB device in your Mac's System Profiler, yours is most likely a hardware problem. In that case, contact Apple or an Apple-Authorized Service Provider for service.
    (4) If your iSight is working with Apple's apps but you are still having difficulty with a video-enabled website (like "myspace") while no other apps are using iSight, your browswer's Flash plug-in settings may need to be configured to allow your iSight to function with there. 
    To determine whether this is your problem, navigate to the video website of interest. If you do not immediately see a pop-up "Adobe Flash Player Settings" dialog box, put your mouse pointer over the video window that is playing and control-click. This should open the dialog box.
    Adjust the "Settings" in the Flash dialog box as follows:
    • Click on the webcam icon.
    • Select the "USB Video Class Video" Camera setting.
     (External iSight users would need to set the webcam camera setting to "IIDC Firewire Video".)
    • You can then click on the microphone icon to set your "Microphone," "Record Volume," and "Reduce Echo" settings.
    • You should also click the privacy icon and verify that the "Allow" button is selected.  If "Deny" is selected, you will not be able to send or recored video or audio.
    • Close the dialog box and see if the video website works for you now.
    If the above does not solve your problem, see the website help or FAQ section to determine how to make this site work with your system. Many live video sites have unique requirements. The FAQs or Help links at their sites should give you the best answers for your compatibility, configuration, and operating questions concerning their particular operations. Some of these sites offer email or live chat technical support or their own dedicated user Discussions fora to provide help using their particular websites.
    EZ Jim
    Mac Pro Quad Core (Early 2009) 2.93Ghz w/Mac OS X (10.6.3)  MacBook Pro (13 inch, Mid 2009) 2.26GHz (10.6.3)
    LED Cinema Display  G4 PowerBook 1.67GHz (10.4.11)  iBookSE 366MHz (10.3.9)  External iSight

Maybe you are looking for