Satellite C650D - left click on touchpad does not work

Hi,
The left click on my touchpad has stopped working. It works *very* occasionally but mostly it doesn't. It also freezes the screen if I try to click it too often (in a fit of temper usually ;) )
A USB mouse works fine, which is okay when I'm working on my desk but means I can no longer use my laptop on my lap! The tap click does work, but I don't like using it.
I reinstalled the drivers and that hasn't solved it. I turned the laptop upside down and gave it a good shake to get rid of any crumbs etc under the mouse and that hasn't solved it either.
Any other ideas?

Hi
Could be possible that there is a mechanical problem with the touchpad button
Pressing the button too often might lead to the system freezing because of the CPU stress and load.
In my opinion the touchpad board or the single button (if possible) should be replaced.

Similar Messages

The click at touchpad is not working, please help!!!

I use Macpro, recently the click at touchpad is not working, please help!!! Thank you !!

For this issue AppleCare support told me to so a SMC reset as follows:
Power the machine OFF.
At the SAME TIME hold down the following buttons:
Shift
Control
Option
Power
Then release all buttons. Power up the Macbook and see if the trackpad button work.
Hope this helps.
Bill

Double click select all does not work in web site's search area after going back.

After updating from Firefox ESR v24.8.1 to v31.20 double click select all does not work in a search area after going back or searching again with the same input. It happens before clicking search icon and searching for something else double click select all does not work except it works for one word that's all.
This issue is with all new Firefox ESR and None ESR I have tried. Also the issue is on all web sites like www.softpedia.com for example.

Bugzilla has a different login system, unfortunately.

I need to re-download Lion and install it. Holding the Option key while clicking on "purchases" does not work.

I need to re-download Lion and install it, after re-formatting my hard-drive to "journaled" as requested. Holding the Option key while clicking on "purchases" does not work.

Thanks Smokemonster. I found that the Lion install app was in in my applications folder already. Worked fine.

1-click weather extension does not work in Firefox 4...

The 1-Click Weather extension does not work in Firefox 4. It comes up with a bunch of Javascript errors.

You'll need a little bit of tweaking on this add-on. Please read this link. It might take a little bit of work, but it does worth it as 1-Click Weather is a far better add-on than any others of the same category:
https://addons.mozilla.org/en-US/firefox/user/5661757/

Click to activate does not work after update

Click to activate plugin does not work after updating to version 23.0.1

hello Kamullia, if you have set click-to-play to true in about:config you can now go to the ''addons-manager > plugins'' section and set the permissions individually for each plugin type.

Touchpad does not work even after format - x220t

Hi there,
I've had my X220 tablet for about 10 months and it has been great. For the last month however, the touchpad and touchpoint have become flaky. When rebooted or coming out of standby, the touchpoint/touchpad often did not work; after resetting a few times, i would work, but then stop working again when the system when into standby mode.
I thought this was a driver issue, but uninstalling and reinstalling to the newest drivers did nothing. I have also updated/reset the BIOS.
I have more recently have not been able to get the touchpad working at all now and relying on just the touchscreen for input is very frustrating.
When Windows 8 CP came out this week, I decided to give the computer a fresh format and reinstall Windows --- maybe that would resolve the issue. No luck. The touchpoint/touchpad did not work even in Windows 8.
I read around a bit and have tried disabling JUST the touchpad in the BIOS, and amazingly, the touchpoint will work fine when I do that. When I disable just the touchpoint or leaving both enabled, neither the touchpad or touchpoint will work.
As far as I can tell from what I have been able to diagnose, the touchpad is damaged and is causing a conflict with the touchpoint when enabled. I am not sure of this, but it is my belief now.
Are there solutions out there for me? I do have 2 months left on my warranty, but I hope to keep mailing my notebook in for support as a last resort.
thank you,
steve

xyster wrote:
When Windows 8 CP came out this week, I decided to give the computer a fresh format and reinstall Windows --- maybe that would resolve the issue. No luck. The touchpoint/touchpad did not work even in Windows 8.
If you are ready to reinstall Windows, try this method:
http://forums.lenovo.com/t5/X-Series-Tablet-ThinkPad-Laptops/My-X220t-Clean-Install-Method/td-p/6612...
If after that your trackpoint/touchpad still don't work, I think one of them (or both) is defective.
X220t | i7 | 320GB HDD | 8GB RAM | WIN7 PRO
IdeaCenter A520 | i5 | 1 TB HDD | 6GB RAM | WIN8.1

Satellite Pro M30 Win 7 - webcam does not work on msn messenger

Hi all
I have a Satellite Pro M30 Modell Nr.: PSM35E and have just changed to Windows 7. But the Nvidia Card NVIDIA GeForceTM FX Go5200 Grafik mit 64 MB RAM does not work properly.
I could find a driver from Vista and installed it, have Aero pics on the desktop, but my webcam does not work on msn messenger and this is the only way for me to see my family.
Can someone help me?
Thanks for your help

Hi
Im a little bit confused; do you have some problems with the graphic card or with the webcam?
I assume you are speaking about external webcam connected to the USB port? Right?
What happens if you connect the webcam to the notebook? Can Win 7 recognize the connected device? Did you install additional drivers for this webcam?
In most cases its necessary to do that because I think its not plug & play device.

Satellite Pro L20-212 - USB2.0 does not work

Hi,
I own a *Satellite Pro L20-212*, *Windows XP (SP2) is installed, but USB2.0 does not work*. I can't see anything about USB2.0 in the Devicemanager and the speed of the attached USB2.0 devices is at the USB1.1 level.
I don't know which information is needed to help me out with this problem because it should normally work on my notebook (and I know that the notebook has USB2.0 ports).
Do I have to install a special driver in order to use USB2.0 or is there any software on my notebook which I have to enable?
Thank you very much,
Frank

Hi
+Fact is that the notebooks hardware is ok and it seems that you only need to install some MS updates and maybe a chipset driver.+
True.
+But lets begin with the basics? as I??m not mistaken; the Satellite Pro L20 belongs to the PSL2YE. Therefore you have to choose this series number if you download the drivers.+
That's what I did.
+On the Toshiba European driver page you will find the Intel Chip Set Utility. Please install it firstly. Do you have an ATI card? If yes install the graphic driver from the Toshiba page because this driver contains the chipset driver for the units with ATI graphic card!!!+
I have an ATI card and I installed the driver from the Toshiba page which includes the chipset driver. That's the first driver I installed on my notebook.
+Secondly you will find the Quick Fix Engineering on the Toshiba page. These are the MS updates which must be installed!!!+
Every single update of Microsoft for Windows XP is installed, so this shouldn't be the problem
+Then the USB ports should be correctly recognized in the device manager and should work.+
USB is recognized, but not as USB 2.0 :-(
+By the way; you should test the USB ports with different external USB devices to ensure that it??s not a USB device malfunction?+
I did that, too. And I used the same decives on Ubuntu to test the USB 2.0 function. And everything worked perfectly.
That's tricky. I don't have the slightest idea what I can do now. The hardware works, the drivers are correct, but it still doesn't work. GRRRRRRRRRRRRR
But thank you very much Gipsyman!

Satellite P105 mat****a dvd drive does not work with Win 7

Greetings,
I need an upgrade on my dvd for my vintage Satellite P105.
I want the fastest dvd burner possible at this time because I am a movie fan and keep them in digital storage.
1) First should I go get an external drive or can I get top performance with an internal dvd replacement from a parts dealer or Toshiba?
The problem is when I upgraded to windows 7 things changed. I lost my sound but solved that by using a legacy driver for Visa as apparently the sound "board" on the laptop is made for only Vista. Next I found the dvd drive which is a mitsu****a UJ-450s internal does not work or is extremely slow in backing up movies from discs or files. The available burner software also seems intended for Vista as performance was acceptable then. Even the dvd burner software does not work.
2) So, my question to the mavens of multimedia is: What should be my next move?
3) Should I go external and face the USB bottle neck or
4) go for the bus speed on the internal dvd?
5) Given that an internal dvd is better as it is exactly a dvd-ram/IDE as it currently is, or some other bus configuration.
6) Most importantly, what dvd burner would give me 18x speed with current software like ConvertXtoDVD and fit as an external or -- better -- as an internal dvd replacement or my slow drive currently?
Of course, if you could give me a model number and direct me to sales it would be much appreciated.
Thank you all in advance.
Rachel_1

1) First should I go get an external drive or can I get top performance with an internal dvd replacement from a parts dealer or Toshiba?
You should know that not all internal ODD>>>>>>>>>>>>>>>>>>>>>ODD?>>>>>>>>>> devices are compatible. You will need to use an compatible and supported ne and such device could be ordered from an local ASP.>>>>>>>>>>>>>>>>>ASP?>>>>>>>>>>>>>>>>>>>>>>>>> >>
But its more expensive as an external CD/DVD device therefore you could also choose an external one which would be compatible with all possible notebooks and computers.
Makes sense
2) So, my question to the mavens of multimedia is: What should be my next move?
As mentioned. Good option would be to buy an external ODD burner>>>>>>>>>>>>>>>>>>Okay>>>>>>>>>>>>>>>>>>>
3) Should I go external and face the USB bottle neck or
External device are compatible with all computers and are cheaper>>>>>>>>>>>>>>>>>yes, but isn't the data thru put slower with an external via USB or should I get firewire?>>>>>>>>>>>
4) go for the bus speed on the internal dvd?
If you have the money for an internal device and want to use it only with P105 then you can choose also an internal burner.>>>>>>>>>>>>they are $96 here at toshiba site>>>>>>>>>>>>
e
5) Given that an internal dvd is better as it is exactly a dvd-ram/IDE as it currently is, or some other bus configuration.
As far as I know its an IDE interface but the device would support master or slave or c-sel>>>>>>>>>>>>>>>>>>>what is c-sel????>>>>>>>>>>>>> settings. As mentioned, you have to buy an Toshiba recommended one.>>>>>>>>>>>>>the one sold here would be recommended, would they not?>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
6) Most importantly, what dvd burner would give me 18x speed with current software like ConvertXtoDVD and fit as an external or -- better -- as an internal dvd replacement or my slow drive currently?
Look point 5)>>>>>>>>>>>>>>>>so you agree that a bus connection is superior to a USB then?>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
Thank you for your prompt reply. Could you comment on my questions add to your message?
Rachel

After clicking game center does not work game in IPhone

Hello everyone
I work Flush Bolder 4.6
Using AIR SDK 3.9
I create a lot of games and has never met with such a problem.
When I run the game at IPad my game works without problems. After hiding Game Center game works fine.
In IPhone after clicking Game Center game does not work. All the buttons do not work.
What could be the reason?
Thank you

I have the same problem...
Tried using Chess, editing the hosts file, using the iOS simulator from Xcode, I added 208.67.222.222 e 208.67.220.220 to the DNS Servers, and I currently have a clean Mountain Lion instalation...but GameCenter still doesn't work.
I get a small green window that covers the login fields, and the window has nothing on it, just a button to "Cancel". I put my password and click on Login, but nothing happens...

Clicking the lock does not work HELP

clicking the lock at any kind of program does not work at all, not working in system pref,
not working at ''get info'' window, not working in any other kind of lock, i tried defragging via idefrag but that couldn't work because it needed a lock to be opened as well, i can't move my files to some folders, getting the ''The operation can’t be completed because an unexpected error occurred (error code 100022).''
plus when i log out, cannot log in because when i type my password it accepts it but then nothing happens, i had a root account as well but i can't enter it and can't create again because of the lock, but when i log in with guest account(no pass required) i can make changes via clicking the lock and filling in admin username and password in system preferences. and i created a new admin account in guest account by filling admin info for authorization in system preferences > users&groups , set no password, logged out but could not log into that account as well. my system is set to login to my account when the system starts. so thats how i can use the computer

Back up all data if you haven’t already done so. There are ways to back up, even if you can’t log in. Before proceeding, you must be sure you can restore everything to the state it’s in now. If you’re not sure you can do that, STOP.
Briefly, you need to delete the following file:
/var/audit/current
If you already know how to do that, you can skip the rest of this message. Do it, and try again to log in.
Step 1
Boot in single-user mode by holding down the key combination command-S at the startup chime. If you’re using an external USB keyboard, it must be plugged directly into a built-in port on the Mac, not into a hub. Release the keys when you see a black screen with scrolling white text. In this mode, there’s no graphical interface; just a command line. Initially, you can’t make any changes to files.
Step 2
When the text stops scrolling, and you see a line ending in a pound sign (“#”), type the following command:
rm /var/audit/current
You must type the command exactly as given. If you don’t feel able to do that, STOP. At this stage, no harm will be done if you make a mistake, but later, it will be.
Press the return key. You’ll get an error message about a “read-only filesystem” below what you entered. There must be no other error message. If there is, try again until you get it right. You’ll continue to get the read-only error.
You might get the error “No such file or directory,” even if you entered the command correctly. If you’re sure that’s the case, stop and post again.
Step 3
Once you’ve taken steps 2, and received the expected error messages, enter the following command:
mount -uw /
Again, you must get it exactly right. This time, there should be no output at all. If there is, you mistyped the command, or something else is wrong.
Step 4
When you’ve taken step 3 with no error message, press the up-arrow key until the command from step 2 (rm …) reappears. If you got everything right on the first try, you’ll need to press the key twice. Make sure the command is correct, then press return again. There should be no output. If there is any, make a note of it and post a reply.
Step 5
Enter the command:
exit
Press return. The text will start scrolling again, and then the system will reboot. Try again to log in.
Credit for this solution is due to ASC user AnthonyTW.

Satellite C50-B-14Z - Wi-Fi does not work properly

I've bought my laptop 1 week ago (Satellite C50-B-14Z), but Wi-Fi is not working properly. Most of the time, it looks like it's connected to my network without any problem. However, It does not work, I can't surf the web.
The router is new and all the conection has been checked by a staff member from the internet company.
What can i do? All software is updated.
Thanks.

As mentioned by previous user; first of all you should check if the notebooks internet connection would work using the LAN.
In case you will be able to connect to internet using LAN, you should check the WLan settings.
For example: I would recommend you to disable the WLan encryption (within the router configuration menu) and to test the WLan connection to an open (not secured) wireless LAN.
Of course this should be done only for testing purposes.
In case the connection would work, test different kind of encryption (WPA/WPA2 AES TKIP)

Satellite P105 - DVD/CD ROM drive does not work

The DVD/CD ROM drive on my P105 does not work at all. I've tried the registry fix for the upper/lower limit thing - didn't fix the problem. The drive does have power, does spin a disk, but it is not recognized by the system. It doesn't show up in the device manager at all. I need to get this working and I'm hoping it doesn't need a new drive as this machine is out of warranty (of course!). Thanks for any and all suggestions on hot to fix this problem.

Howdy folks. This thread has a lot more views than the one I posted to, but go here to the following message for a possible solution to your CD/DVD Drive issue:
http://laptopforums.toshiba.com/tshb/board/message?board.id=brd_gen&message.id=3357&query.id=176774#...
Cheers!
D.Lex

Satellite M645-S4050: built in camera does not work correctly

My built in camera does not work correctly.
It does not have any kind of effect on and it captures pictures and videos as if some kind of thermal camera was on.
Also some videos I load up on youtube look like this.
I have been researching for an answer but can't find it, please help me.

All you can do is to test it with latest webcam driver.
Remove preinstalled camera software and install latest version offered on Toshiba download page.
If the same happen again visit nearest Toshiba service and show them how it looks like. Maybe the cam must be exchanged.
In the past I have used several Toshiba laptops with built in cam but I have never saw something lke this.

Satellite C650D - left click on touchpad does not work

Similar Messages

Maybe you are looking for