Satellite C655D won't boot properly after MalwareBytes scan/repair

I ran a scan with MalwareBytes and deleted the resulting files (some of them had the term "PUP" in the filename, not sure if that means anything). After the delete I was prompted to reboot the computer, which I did. Ever since then the computer will not boot up completely, a bar goes across the bottom of the screen saying "Windows is loading files" that stalls about a third of the way through and the computer starts beeping. I tried doing a system restore and it still happens. Any ideas?

Hi ! It sounds like you may still be infected to me. Type MRT in search and run scan. What are you using for Anti-Virus protection?
Dolie!!
PS if you OS has been corrupted , we may need to go back to factory???
Please post your complete model number found on the bottom of your laptop.
PS We may need help from Jerry!!
I Love my Satellite L775D-S7222 Laptop. Some days you're the windshield, Some days you're the bug. The Computer world is crazy. If you have answers to computer problems, pass them forward.
Attachments:
Capture40.JPG ‏419 KB

Similar Messages

Mac won't boot properly after putting in Windows 7 boot disc

I wanted to get Windows 7 on my Mac, so I got the disc, ran boot camp assistant, and when it said install Windows 7, I put the disc in, and clicked continue. The Mac reset, and after it got past the white screen, it went black, and my keyboard and mouse stopped working. Now I can't take the disc out because it won't let me go to my desktop.

Keyboard/trackpad inoperative, black screen, or alert messages when installing Windows 7
Boot Camp- Windows installation boots to black screen with blinking cursor
Five ways to eject a stuck CD or DVD from the optical drive
Ejecting the stuck disc can usually be done in one of the following ways:
1. Restart the computer and after the chime press and hold down the
      left mouse button until the disc ejects.
2. Press the Eject button on your keyboard.
3. Click on the Eject button in the menubar.
4. Press COMMAND-E.
5. If none of the above work try this: Open the Terminal application in
      your Utilities folder. At the prompt enter or paste the following:
        /usr/bin/drutil eject
If this fails then try this:
Boot the computer into Single-user Mode. At the prompt enter the same command as used above. To restart the computer enter "reboot" at the prompt without quotes.

My 2006 iMac running Snow Leopard won't boot even after erasing and re-installing Snow Leopard (via my MacBookPro), either from the HD or DVD drive. Can't get it to run Hardware Test. Disk Utility says disk OK - files are there. What can I do?

My 2006 iMac running Snow Leopard won't boot even after erasing and re-installing Snow Leopard. I erased and re-installed by putting the iMac in Target Disk mode and usin my MacBookPro as the host. But after numerous attempts I still can't get it to boot either from the HD or DVD drive. I just get the white screen after the wheel stops spinning. I can't get it to run Hardware Test - just get the white screen. If I use Disk Utility via my MBP it says the disk appears OK. All the Snow Leopad files appear to have been installed. What can I do?

Hi-NRG Bwoy wrote:
I erased and re-installed by putting the iMac in Target Disk mode and using my MacBookPro as the host.
Reet the SMC and the PRAM
 Cheat sheet to help diagnose and fix your Mac
Perhaps you installed the wrong version OS X onto the iMac, you can't use the disk from another Mac.
clean the disk.
If it's not working then use this method to create a bootable 10.6 USB from the iMac machine specific 10.6 disk or the 10.6.3 retail disk on your other Mac, use it to boot the iMac with.
http://www.maciverse.com/install-os-x-snow-leopard-from-usb-flash-drive.html
How to erase and install Snow Leopard 10.6

Mac won't boot properly unless in safe mode

Recently I updated my MacBook Pro to OS X Yosemite. I then started the process of the data encryption.
I don't know what happened, but maybe the encryption failed, because now every time I turn my mac on, it won't boot properly unless it's in safe mode.
Either it will have a black screen with a visible cursor, or just the desktop with no dock or the bar along the top and no icons, or it does boot up properly, but works extremely slowly. Like if I was to press the apple symbol on the top-right of the screen, it would take 5 minutes to actually open it. Nothing works properly.
And so I opened up my system preferences, and discovered that the Encryption is stuck on half-finished. But I can't stop it. If I try to turn encryption off it says I have to wait till it's finished. But it never does, the progress bar never moves.
If I open System Preferences while in Safe Mode, the progress bar for Encryption is grey, and underneath it says "connect to power to continue encryption". But it IS connected to power.
Have I stuffed my Mac? Is there a way to get it working again?

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*genieo\* \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB ' com.adobe.AAM.Updater-1.0 com.adobe.AAM.Updater-1.0 com.adobe.AdobeCreativeCloud com.adobe.CS4ServiceManager com.adobe.CS5ServiceManager com.adobe.fpsaud com.adobe.SwitchBoard com.adobe.SwitchBoard com.apple.aelwriter com.apple.AirPortBaseStationAgent com.apple.FolderActions.enabled com.apple.installer.osmessagetracing com.apple.mrt.uiagent com.apple.ReportCrash.Self com.apple.rpmuxd com.apple.SafariNotificationAgent com.apple.usbmuxd com.citrixonline.GoToMeeting.G2MUpdate com.google.keystone.agent com.google.keystone.daemon com.microsoft.office.licensing.helper com.oracle.java.Helper-Tool com.oracle.java.JavaUpdateHelper com.oracle.java.JavaUpdateHelper org.macosforge.xquartz.privileged_startx org.macosforge.xquartz.privileged_startx org.macosforge.xquartz.startx ' ' 879294308 4071182229 461455494 3627668074 1083382502 1274181950 1855907737 2758863019 1848501757 464843899 3694147963 1233118628 2456546649 2806998573 2778718105 2636415542 842973933 2051385900 3301885676 891055588 998894468 695903914 1443423563 4136085286 523110921 2883943871 3873345487 ' 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' s/[0-9A-Za-z._]+@[0-9A-Za-z.]+\.[0-9A-Za-z]{2,4}/EMAIL/g;/faceb/s/(at\.)[^.]+/\1NAME/g;/\/Shared/!s/(\/Users\/)[^ /]+/\1USER/g;s/[-0-9A-Fa-f]{22,}/UUID/g;' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: (E[^m]|[^EO])|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<10) print "com.apple.";} ' ' { sub(/ :/,"");print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { split("'"${p[41]}"'",b);split("'"${p[42]}"'",c);for(i in b) print b[i]".plist\t"c[i];if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\$[0-9]+\$\$.+\$/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p);if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"cksum "F|getline C;split(C, A);C="checksum "A[1];"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text(, with v.+)?$|(Bo|PO).+ sh.+ text ex|XM)/) F=F" ("T", "C")";else F=F" ("C")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/$L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9|"sort|uniq";} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ *$/d;s/^ */ /;' ' s/^.+ |\(.+$$//g;p ' '/\.(appex|pluginkit)\/Contents\/Info\.plist$/p' ' /2/{print "WARN"};/4/{print "CRITICAL"};' ' /EVHF|MACR|^s/d;s/^.+: //p;' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps crontab iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl smcDiagnose sysctl\ -n defaults\ read stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' pluginkit scutil dtrace profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil lsof test osascript\ -e );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'|tr , \\\n" 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$(RefProc): \$Message' -k Sender Req 'fsev|kern|launchd' -k RefProc Rne 'Aq|WebK' -k Message Rne 'Goog|ksadm|probe|Roame|SMC:|smcD|sserti|suhel| VALI|ver-r|xpma' -k Message Req 'abn|bad |Beac|caug|corru|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|NVDA$|pagin|proc: t|Roamed|rror|SL|TCON|Throttli|tim(ed? ?|ing )o|WARN' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cght] ! -name .?\* ! -name \*ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '/S*/*/Ca*/*xpc* >&- ||echo No' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,Ex}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,In{p,ter},iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,mach_i*/*,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t {/S*/,/,}L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" -m 'L*/{Con*/*/Data/L*/,}Pref* -type f -size 0c -name *.plist.???????|wc -l' kern.memorystatus_vm_pressure_level '3>&1 >&- 2>&3' " -F '\$Time \$Message' -k Sender kernel -k Message CSeq 'n Cause: -' " );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents XPC\ cache Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors App\ extensions Lockfiles Memory\ pressure SMC Shutdowns );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};A'$((7+i))'() { v=` eval sudo "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};';done;A9(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0() { [[ "$v" ]]&&sed -E "$s"<<<"$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v"|sed -E "$s";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "${s[63]}"<<<"$v"`&&C1 1 $1;};for i in 1 2 7 8;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;B1&&D73 19 53 67 55;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 54 12 56;D23 5 14 12 14;D22 6 36 13 15;D22 20 52 66 54;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D82 35 49 61 51;D82 11 17 17 20;for i in 0 1;do D82 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A8 18 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;B3 4 0 65;A3 14 6 32 0;B4 0 16 11;A1 26 50 64;B7 16;C3 52;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D73 21 0 32 19;D73 10 42 32 40;D82 29 35 46 39;};D23 14 1 62 42;D12 34 43 53 44;D12 22 20 32 25;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 21 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D83 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 10 42 32 41;D13 37 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 21 48 49 49;B3 4 22 57;A1 21 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D12 4 51 32 53;D23 22 9 37 7;A9;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Macbook pro won't boot up after installing a Micro Trend security.

Macbook pro 13" unibody non-retina won't boot up after installing a Micro Trend security.
Please Help Thanks!

Boot to safe mode and uninstall Micro Trend from there.
http://esupport.trendmicro.co.jp/Pages/JP-2075680.aspx

Mac OSx won't boot up after update to 10.6.7?

Mac OSx won't boot up after update to 10.6.7?

Hi Mike
This is called a kernel panic, similar to s 'blue screen of death' on Windows. When you say you reinstalled 3 times, do you mean the OS or the Update?
When does this kernel panic appear? You may have a hardware issue if it's happening on boot.
Taylor

Help! iWeb won't open properly after I updated to Yosemite. No old websites, no workspace- nothing is displayed even when the app is open. HELP!

Help! iWeb won't open properly after I updated to Yosemite. No old websites, no workspace- nothing is displayed even when the app is open. HELP!

To open your domain file in Lion, Mountain Lion or Mavericks or to switch between multiple domain files Cyclosaurus has provided us with the following script that you can make into an Applescript application with AppleScript Editor. Open Script Editor, copy and paste the script below into Script Editor's window and save as an application.
do shell script"/usr/bin/defaults write com.apple.iWeb iWebDefaultsDocumentPath -boolean no"
delay 1
tell application "iWeb" to activate
You can download an already compiled version with this link: iWeb Switch Domain. Note: you may have to Control (right) - click on the app after uncompressing and select Open due to the Sandboxing feature of OS X. If you have problems with the app create your own with AppleScript Editor.
Just launch the application, find and select the domain file in your Home/Library/Application Support/iWeb folder that you want to open and it will open with iWeb. It modifies the iWeb preference file each time it's launched so one can switch between domain files.
WARNING: iWeb Switch Domain will overwrite an existing Domain.sites2 file if you select to create a new domain in the same folder. So rename your domain files once they've been created to something other than the default name.
NOTE: In Lion and Mountain Lion the Home/Library folder is now invisible. To make it permanently visible in Lion or Mt. Lion enter the following in the Terminal application window: chflags nohidden ~/Library and press the Return key - 10.7: Un-hide the User Library folder.
For Mavericks and Yosemite go to your Home folder and use the View ➙ Show View Options menu to bring the this window:

My Sleek won't boot properly! Stuck on Recovery/Rescue m

Each time I boot my Zen Sleek it either goes to the rescue mode or it just locks up on the Creative logo. I've had it for a few months and this is the first time it seriously locked up on me. I hard reset it on the bottom and it's still the same. I tried to run Disk Cleanup through the rescue mode and it doesn't even run it!! I don't know what's going on... Yesterday it was playing like a beauty.

?Re: My Sleek won't boot properly! Stuck on Recovery/Rescue mode?
MRM wrote:
I appreciate your help, but you should read my post first. I don't need to go into rescue, I need it to NOT go to rescue. I tried formatting and it says HDD problem...ugh
Your hardri've has died. You can replace it Insrtuctions for opening here. http://www.youtube.com/watch?v=TWT8W...eature=channel? Place to purchase here? http://www.thegadgetdr.com/Zen-Sleek-or-Sleek-Photo-20GB-Hard-Dri've-p/zs-20gb-hd.htm ? & ? http://cgi.ebay.com/ws/eBayISAPI.dll...item=350225256? Here this is a larger size dri've but will fit & you will need the tools to open it those here? http://www.thegadgetdr.com/iPod-Zune...-Tools-s/8.htm

The premier timeline won't redraw properly after zooming.

the premier timeline won't redraw properly after zooming.
this seems to happen suddenly to random timelines, I can have other timelines in the same project behave perfectly but suddenly a timeline becomes cursed and then I'm stuck doing a long workaround to fix it
here's my workflow to get to where I am.
I'm bringing in PluralEyes xml's of DSLR footage and field audio,
I'm working off the replaced audio sequences, and then edit the audio in Audition to do tasks like normalizing, hum removal etc.
back to premier, edit, grfx, output.
Sometimes a timeline that I've previously finished a roughcut of just gets corrupted when I go back to it. Ive got it back to behaving normally by deleting all the rendered and replaced Audition audio, and then recutting the clips back into place and effectively rebuilding my sequence. Now these are a series of 2 minute interviews. If this was a major long form edit I'd be completely fu**ed.
About my setup. Late 2013 Mac Pro (Trashcan), 12 cores, 64GB Ram, Mavericks. I use spaces and have 5 virtual desktops typically (one for each app, PS, Pr, Ae, Chrome and other bulls***, one spare for random bulls***)
This is super s*** and I'm on deadline.
Please help.

Hi Scott,
I've been seeing an issue (for quite some time now) where if I'm working a job on two different edit systems (usually with duplicate media or using a shuttle drive for mobile editing) that when I open the project on the "other" system the timeline won't redraw properly and looks like the attached image. The edit is there and the system will play the timeline but it's unusable as you can't work.
Yes, I have seen issues here in support when users transport their projects from one system to another via a portable hard drive. It's very weird behavior and I'm investigating the issue. What you might try is a different method of transporting those projects, like a different drive, etc.
I will add this issue to my report. Feel free to file a bug report here.
Thanks,
Kevin

Satellite A55 won't boot from CD

A friend gave me a Satellite A55 for my daughter. It was working for him until it started making a screeching noise.
I determined that to be the HDD - it stopped when I removed it!
Dropped in another HDD from an other laptop, but it won't boot. That drive is beleived OK but no way to be 100.00% on that.
The unit powers up normally and I have full access to the BIOS (no passsword set). I have tried to boot to a WIndows (full version bootable) CD from the boot screen, hotkey 'c', and from changing the boot order in the BIOS. The CD is known good, and the CD drive lights and spins up on power up. But it will not boot or give any indication that it is trying to read the drive. I have built lots of desktops, but thsi is my first dive into lappys. Still, by my reckoning, even if the HDD has issues, the CD should still boot up and attempt a Windows install. Booting straight to CD, or to HDD first I get a blinking cursor on a blank screen and after a minute or two a "disk error - Press any key to restart" message . The CDROM light does not come on - leading me to believe the laptop is still going straight to the hard drive in both instances.
What am I missing?
TIA
Edit: The Bios recognizes the hardware - the HDD as primary and the CDROM as secondary.

Will the drive read any other CDs?
Can the disks be read on a different computer?
Have you tried gently cleaning the disks under lukewarm running water and patting them dry with a clean soft cloth?
Are the disks scratched, smudged, or otherwise disfigured?
If you don't post your COMPLETE model number it's very difficult to assist you. Please try to post in complete sentences with punctuation, capitals, and correct spelling. Toshiba does NOT provide any direct support in these forums. All support is User to User in their spare time.

Won't boot anymore after nvidia-xconfig

Hey Guys,
Got a problem with my Arch Linux here, hope you can help.
Today I tried to install the official Nvidia Driver and BumbleBee following along the great Wiki on this topic.
Everything worked just fine and I also could run optirun gfxgear or somemthing like this.
I wanted to switch to the Nvidia Settings in the settings menu and it told me to configure my xconfig and restart x so I typed nvidia-xconfig in the terminal and it gave me an success output.
I restarted my system and now it hangs on the graphical thing I think. It won't boot anymore.
Hope you can help me out.
Thanks alot
Edit: My Nvidia Card is a Nvidia GT 740M if this matters
Last edited by Whitz (2015-02-09 11:02:41)

No, I have a laptop with 2 graphic cards an intel hd4000 and a nvidia gt 740m.
I ran the Arch Linux installation well until I tried to get the nvidia gt working with bumblebee.
I followed the wiki of the bumblebee topic and it worked well. I wanted to switch into the nvidia settings and it told me my x isnt configured properly and I should type nvidia-xconfig and restart X.
After the restart it won't boot to the graphical interface anymore.
Hope this cleared up the things
Also I dont get any errors but it just wont load..
Last edited by Whitz (2015-02-09 12:08:49)

Re: Satellite C850 won't boot anymore - broken HDD

Hello Folks,
I bought a *Toshiba Satellite C850 - 1F2* with *+Windows 8+*.
After installing, upgrading to *+Windows 8.1+* and setting up everything, the whole machine worked pretty fine.
BUT since yesterday the laptop won't boot anymore!
When I turn it on, the HDD makes click and click and the system tries to boot from DVD, from USB, from HDD, from IPV4, from IPV6 and then it says, that there is no bootable device.
Unfortunately I wanted to make the +Windows 8 Restoration-/Rescue-DVDs+ this weekend!
Huh!!!
Well, I still have an *+original Windows-7-DVD and license+*, which would be good as well (I used it the last years).
*YET*, I cannot install *+Windows 7+*.
It says something like that, that +this system is not available for Secure Boot+.
I read about "Secure Boot".
So I pressed F2, turned the laptop on and could with this reach the BIOS.
It is a *+InsydeH20 Rev. 3.7+*.
*BUT*, when I go to "Boot Mode" I can only see, that this option is greyed and I cannot change from +UEFI Boot+ to +CSM Boot+.
Even the change of the HDD made no difference.
I put in my old HDD with Windows 7 installed (wich works in the other laptop), but the system won't boot, for it is +not suitable for Secure Boot+.
*So, WHAT NOW?*
I mean, it cannot really be the Toshiba politics, that you need to throw away your laptop, if the HDD breaks, can it?
For I didn't create the Rescue-DVD, I have just my Windows 7 DVD and another HDD with installed Windows 7.
Do I need to buy another Windows 8 licence and another HDD, to install Windows 8 (suitable for Secure Boot) again?
Would it even work like that?
Or is there any chance to upgrade the BIOS, for that I can then change from UEFI Boot to CSM Boot?
Or is there any other chance, to use my other HDD with Windows 7, or at least a new clean HDD, on wich I then can install my Windows 7 OS?
I hope, that someone can give me any good advice, what to do now ... without throwing the Toshiba laptop away ;)
Thanks in advance!

If the HDD died, in needs to be replaced.
If notebook is still covered by warranty, the HDD will be replaced free of charge. If warranty isnt valid, you will need to pay for the new HDD.
I think this understandable.
_Now some facts about the Recovery disk._
If you did not create a recovery disk in the past, you could order the recovery medium on this page: http://backupmedia.toshiba.eu/landing.aspx
The recovery disk would install the Toshiba image and would set the notebook back to the same state like at the first day of purchase.
_Regarding the Win 7 installation:_
Usually to install the non UEFI capable system, the secure boot needs to be disabled and boot mode needs to be set to CSM mode.
If this isnt possible you should update the BIOS but to do that you need an running Windows system (Win 8).

Toshiba A350 sometimes won't boot properly

I notice there are number of problems similar to this but no one has a fix.
Problem:
1) *Sometimes* when I boot my laptop the power light comes on but the screen stays black. Doesn't go any further.
2) *Sometimes* when I boot my laptop it boots to the Windows start up screen but with thin rainbow coloured lines on the screen (occasionally you can make out the background Windows start up screen). Doesn't go any further.
3) Most of the time it boots and it works perfectly. No crashes or screen problems.
After holding the power button down for a few seconds during 1) and 2) to "shut down" after a few attempts booting it will boot properly.
So far I've flashed the BIOS to the latest version and changed Processor Power Management to 100% under power options (advice from a link on Google). Neither have helped.
Any ideas on this problem? It seems quite specific to start up as it works well otherwise. Very annoying having to try multiple times to boot.
Specifications:
Toshiba A350 (approx. 1 year old, out of warranty)
Windows 7 Pro x64 (upgrade from Vista)
Intel Core 2 Duo P7450 2.13Ghz
4GB DDR2
ATI Mobility Radeon HD 3650 (512MB discrete video memory)
Thanks.

I have exactly the same problem
(Problem:
*Sometimes* when I boot my laptop the power light comes on but the screen stays black. Doesn't go any further.)
My laptop only doesn't start on battery only. The power light comes on and the stays on with the laptop in a freeze (nothing displayed on screen). The only way to get this light off is to remove battery.
Starts EVERY time with the AC power connected (with or without battery).
Works perfectly normal once booted
SOMETIMES starts with the battery only if I boot soon after I have already been using the laptop
I have tried the static release processes but doesn't work.
After having this trouble I updated to latest BIOS but has not helped
Tried a different battery and has not helped
Is a Toshiba Satellite PRO L500 T4400 4GB 15" Win7 Laptop - only 3 weeks or so old
Very annoying!
Please someone with an answer??

Satellite m300 won't boot! please help!

Hi,
I've got a bit of an issue here.. I have a Satellite m300.. a white one..
and it won't boot... I've had this very issue before but it turned out to be an external USB HDD that stopped it from booting up but now even with everything removed it still won't boot.
And it was fine until yesterday, it just gave up.. I am away from home for work so I have all the work stuff and unfortunately without my recovery cd, but my guess is that it won't even read it..
So this is what happens..
turn on..
all light come on.. including power and all the white lights around the keypad..
and then maybe 5 sedconds later caplock and numlock(?) green lights flash..
then it's a dead still.. no HDD activities or sound.. just dead quite..
the screen remains black blank through out..
it seems to get stuck here before reaching the post screen.
i thought the power button usually took more than just a push to turn off? it instantly swithces off with a single push of the power button..
I think this laptop is like on sleep or something and can't seem to wak up.. maybe?
And it has vista.
Please help.. I have some important work files I need to recover at least before formatting..
and that has to wait till I get home which won't be for a month or so..
which also lets me take it back for warranty as well..
any help appreciated!!!
cheers,
Min

Quote
Originally posted by syar2003
If running a LCD display with DVI connection , try to hook it up with
an analog VGA cable.
Can also be that the motherboard fails to initialize the vga AGP card.
Turn off all power incl. AC .
Disconnect all devices from motherboard : AGP/memory/drives/floppy/USB/PCI cards etc. take out the 20pin & 4pin PSU connectors and reset the motherboards
cmos .
Assemble PSU connectors ,only one DIMM module and graphics card and turn it on and se if you get a post .
Just removed all components. I reset the CMOS. I then reconnected the 20pin and 4pin, 1 stick ram, and the video card (no ide devices, no mouse, keyboard cd drives) and the monitor doesn't show up. I also tried another monitor so it isn't the monitor.
Could it have a bad AGP port?
Any other suggestions? I am thouroughly stumped. Also the power and reset buttons don't work no matter what configuaration I put the front panel connectors in. The Power LED is lit up and it doesn't work and the reset light is off and it doesn't work.
Also noticed one of my fans connected to one of the two other fan pins on the motherboard isn't working.
What a nightmare.

Mac Book fails to boot properly after EFI Firmware 27 update

hi
I have a strange boot issue having (tried) to install EFI 2.7 update.
When I restart the laptop, it 'chimes', displays a grey screen ... then chimes, displays a grey screen , ... for ever
I hit the bower (off) button for 5 secs or thereabouts, and restart ... same thing
I do this 4 times and finally it reboots.
But the EFI update still appears as needing to be installed (software update tells me it is not installed). Update history shows however that it IS installed.
I can go through this process any number of times ... I now have Software Update history showing quite a few installs opf the EFI 2.7 update.
If I just do a restart WITHOUT installing, I also go through the same fail to restart / fail to start / ... / eventually restart sequence.
So it seems now that the laptop will only start after 4 failed restarts and finally it starts ...
After starting it all appears to be perfectly fine.
Nothing strange in the console logs that I can see. The failed reboots don't seem to register in the console logs - I suspect that the failure to restart is pretty early on in the boot sequence, well before it tries to load any semblance of the OSX kernel. It is almost as if it is trying to boot from someplace other than the disk ... until eventually it gives up and tries the disk. (I have tried booting with and without network cable - no difference) I don't know enough about mac bootup sequences to know if there is some config/setting that is screwed up causing this odd behaviour. I sirt of feel it must be setup/software related, but could be wrong.
Odd.
Any ideas?
- chris

I have a MC721LL/A early 2011 15.4" MacBook Pro i7. After I installed this firmware update my Mail would not load saying the version I was trying to start was not compatible with the OSX version (not sure whether this was an OSX update issue which I think I did at the same time). But the biggest problem I have is that I cannot boot my machine. It boots to the Apple logo and then emits 3 beeps repeatedly. I am on vacation in Osaka, Japan and the Apple Store here told me after running some analytics that the logic board is not seeing the RAM. After reseating the RAM multiple times (both original and replacement DIMMS), it still won't boot. The Genius Bar guy said very nicely that it is out of warranty and needs a new logic board, costing over $500 and taking a week at the factory. He recommended spending the money on a new MacBook instead. Since my machine is 15 months old, I am not very happy about this. The machine was absolutely fine before the firmware upgrade. I will wait till I get back to the US and get a second opinion from my local Apple Store. I can't accept that a 15 month old MacBook Pro very lightly used can develop such a catastrophic failure.

Satellite C655D won't boot properly after MalwareBytes scan/repair

Similar Messages

Maybe you are looking for