Satellite C660-11W - Num pad does not work

Hi!
I have a Toshiba Satellite C660-11W, who I bought 10 months ago. Since October, the num pad of my laptop does not work, but when I push the button "Num Lock", it makes a sound like I had activated the sticky keys.
How do I solve this problem?

Hi
Sounds a little bit like keyboard malfunction.
I think the service technician should need to initialize the Numpad function by Test & Diagnostic software and should replace the keyboard if the test would fail.

Similar Messages

  • Satellite C660 - new internal keyboard does not work

    Hi there
    I'm completely stuck I have a c660 satellite laptop the keyboard wasn't working.
    So I bought a replacement keyboard and installed it and checked in the device manager and it says it's there and is working correctly but the replacement keyboard is still not working.
    I have updated bios and uninstalled keyboard drivers and reinstalled them I have done everything I can think off to get try and get this new keyboard working but I am having no luck and could so with some help.

    Did you ever check if the external USN keyboard works properly?
    Im asking because in case the external keyboard would not work properly, the internal keyboard problem could be related to faulty keyboard controller (motherboard) or system problem.
    In case the external keyboard would work properly, you simply had bad luck with the new keyboard. It could be possible that the new keyboard malfunctions.

  • Portg Z30-A-108 - Num lock does not work on external keyboard

    Hi,
    We have a Portg Z30-A-108. We use it with external wireless keyboard and mouse. On the external keyboard is used, the num pad does not work (as if the "num lock" was off). I tried using the function key FN+F11 on the laptop but without any succes.
    Does somebody had the same problem or any idea to solve it ?
    Thanks.
    Nicolas

    >On the external keyboard is used, the num pad does not work (as if the "num lock" was off)
    You are talking about the external keyboard.
    But from my knowledge the internal Portg Z30-A-108 keyboard does not contain the num pad. Possibly this is the reason why the Num Lock is turned off.
    By the way: the NumLock can be enabled in the system registry.
    Open Windows registry editor using the command regedit.
    In the registry, go to the folders.
    HKEY_CURRENT_USER\ Control Panel\ Keyboard\
    Within the keyboard folder, you should find a string value named "InitialKeyboardIndicators" with a value of 0, 1, or 2.
    Here the value meaning:
    0 = Num Lock is turned OFF after the logon.
    1 = Disable Num Lock.
    2 = Numlock is turned ON after the logon.

  • My touch pad does not work only when using Safari browser. The screen was grey. Help!

    My touch pad does not work only when I use Safari browser online. The screen was grey. No matter what I do, there is no reponse. Only the web address box works. What is this problem? I can use App Store and everything else fine.
    Someone please help.
    Thanks

    I would try:
    - Resetting the iPod:
    Reset iPod touch:  Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.
    - Go to Settings>Safari and delete cache, history and cookies.

  • I have the macBookPro and the problem is the mouse pad does not work I tried everything but still does not work what should i do ?

    I have the macBookPro and the problem is the mouse pad does not work I tried everything but still does not work what should i do ?
    so i'm using the usb mouse

    I want to clarify the issue.
    The issue is with the MBP trackpad, and it works fine with an attached USB mouse.
    With some ingenuity, you might be able to fix this yourself, but I suggest visiting your local Apple Store/Genius Bar. Some have fixed this issue and have posted their results online, but the Apple Store should be your first destination.
    Post here with your results!!

  • Touchpad mysteriously enables itself, after I disable it and number pad does not work

    I just purchased a HP 15 Touchsmart Notebook. I upgraded it to Windows 10 upon initially setting up this Notebook.I have 2 problems: 1. After disabling the touchpad, it mysteriously enables itself.2. The number pad on the keyboard does not work at all, even when pressing the num lock. I've researched the Internet and have come up with nothing. Please help Thank you

    Ok.. I found  how
    First I turned off the wireless in both computers, then I turned off  the firewall in the PC  
    after I plugged  the Ethernet cable in both computers
    I found the  IP address of the PC in; start run  CMD  at the promt  I wrote IPconfig  enter
    In the MAC  I went to  go connect to a server
    I wrote the IP address in the server
    In the user I wrote the admin user of the PC with its password
    Yahooo!...  conected  and I copy the 200 gigs in 2,5 hours  
    Med_

  • Satellite 1800-100: video-out does not work

    He,
    I just installed windows XP on my old Satellite 1800-100, but now my video-out does not work anymore. So I just downloaded the latest driver, but there's no way I can get it installed. According to Windows the new driver isn't newer, so it won't let me update it. And when i try to unistall the display driver, I have to reboot before it takes effect, and wile rebooting it automaticly installs the standard driver again.
    Can anybody help me?
    Greets,
    Daan

    Hi
    Do you mean TV- out port or monitor port? As far as I know this unit is preinstalled with WXP Home and all drivers can be also used for WXP Pro.
    Did you preinstall your own OS (non recovery image)?

  • When a pdf file is opened in a tab, the automatic scroll function from the pad does not work in the other tabs, but only for the particular PDF tab.

    The scroll function from the pad/mouse does not work for the other tabs when a PDF file is opened.

    Hi NSHS,
    Have you checked to see if your PDF add-on is up to date? You should take a look at the [[Opening PDF files within Firefox]] Knowledge Base article. There is a lot of good information in there. You should try both of the suggested PDF add-ons to see if that fixes the issue.
    Hopefully this helps!

  • Satellite A660-11M - Power Saver does not work

    I have a Satellite A660-11M and I work on Windows 7 Ultimate
    The problem is that I have download all drivers and updates but the toshiba power saver does not work its installed with no error and TPSLaunch (green icon) does not open when I click on it and no icon I found in the control panel for the program afterIi install all the Value Added Package!

    Hi buddy,
    Wait a moment, please.
    Im a little bit confused about your posting First you write about Power Saver and then about green icon Which one you mean exactly and whats the problem?
    If you mean Eco mode you have to install Eco Utility from official Toshiba website.

  • Satellite C50-A0121: My ribbon does not work in libraries

    Hi there
    Please can you try assist me.....
    In Libraries my ribbon does not work, the layout wont allow me to make changes, the right click does not work when i want to select any of the options
    I know this might sound blonde for a gal to be asking but PLEASE help
    thanks
    Yve

    Thank you for the reply
    It is a Toshiba Satellite C50 - A0121 (C1005 4096)
    Ive attached two pictures
    1) the properties do not come up when i right click on any file
    2) the format on the ribbon does not work, where you change the way you look at a folder
    Originally Posted by Juan28
    Sorry but your message and issue is not understandable enough.
    Could you please post the notebook model and the system you are using?
    Please explain exactly (very detailed) whats wrong with your notebook!

  • Mouse pad (track pad) does not work,

    Started Macbook w/o mouse. Track pad can move cursor, but "enter function" does not work.

    Did the MBP come with the trackpad, or do you have a mouse as well? To turn off the trackpad, there is a botton on the right side, see picture. Hold, you will see a light, wait until it goes off. To turn on, hold until you see the light.

  • Satellite A660 BIOS update link does not work

    Hey, I got a message today (on Toshiba tempro) that the BIOS update is available.
    Unfortunately the link does not work.
    I hope someone reads this part of the administration of technical assistance.

    Hi
    For PSAW3E:
    http://support.toshiba-tro.de/tedd-files2/0/bios-20100920154827.zip
    Run it as admin.

  • Satellite A300-1EH - windows installer does not works accurately

    Hello, this is my first post on this forum!
    My windows installer does not works accurately.
    What to do?
    Soryy but i dont now much about computer systems.
    Have I to reinstall this installer?
    I'm waiting for your replys.

    >My windows installer does not works accurately.
    What do you mean exactly? Do you see some error? What happen exactly?
    Maybe your CD is scratched or damaged.

  • Satellite C660 - Re-installed WLAN driver not working

    Hi
    I cleared a lot of unused programs from a Toshiba Satellite C660-1JH, and accidently removed the Realtek WLAN Driver.
    The laptop obviously now has no internal wireless connection. When I realised I managed to find the driver online, successfully downloaded and installed it. I restarted the computer in order for the changes to take affect but nothing happened.
    I removed the driver and all associated files and then took it from another site to check that there wasn't anything wrong with the contents of the file. I got exactly the same result twice more. I've been checking the uninstall program list each time to make sure the driver does exist.
    My question is does anyone know if there's something else I need to do after installing the WLAN driver to enable it to operate, or if there's another decent internal wireless adaptor I can download from the web that works with this model.
    Apologies for my vague I.T knowledge, hope somebody can help!
    Thanks

    On this virtual way it is not easy to say what is wrong there.
    Fact is that your notebook has Realtek RTL8188CE WLAN card inside.
    Dont search the driver Googling around. Right driver you can download from Toshiba WLAN portal http://aps2.toshiba-tro.de/wlan/
    Install it, check status in device manager, try to enable WLAN card using FN key combination and send some feedback.
    Driver offered on WLAN portal is the same that you got with original preinstalled recovery image (WIN7 64BIT HOME PREMIUM).

  • NUM-EXP DOES NOT WORK

    hi good day
    I have configured a num-exp however I see that are not working properly ie the call does not end at ext indicated that tagging tries to send the last dialed numbers
    call his voice brief  I see the term 8100 call and tries to look at the CUCM that ext does not exist instead of sending the call to ext 9840 indicated
    could help
    num-exp XXXX810. 9840
    num-exp XXXX811. 9840
    num-exp XXXX812. 9840
    dial-peer voice 1000 voip
     description *** DP a Callmanager ***
     preference 1
     destination-pattern [1-9]...T
     session target ipv4:10.X.X.2
     dtmf-relay h245-alphanumeric
     codec g729r8 bytes 40
     ip qos dscp ef signaling
     no vad

    Can you post a "show run" from your gateway ? Also, what is the call flow ?
    Regards,
    Nipun

Maybe you are looking for

  • 3rd party sales: business report to match the documents

    Dear All, As you know, for third party sales process, we have sales order, purchase order and corresponding goods movemnt, invoice, accounting document. From the sales document flow, we can get the relation between SO and PO. But the goods receipt an

  • Trigger compiles but errors out during execution

    You guys wouldn't like this. Its about a trigger ! Below is a trigger i've found in OTN. I've a similair requirement. The below trigger will compile . But, during execution i get ORA-00936: missing expression during executionI have this feeling that

  • RTF format emails not consistent on recipient end

    I send out stock order confirmation emails to lots of customers. I frequently get replies back, with the content of my email looking very inconsistent. I have done some testing, by making an rtf email, and sending it to a number of friends, and then

  • I am trying to connect to dreamweaver and am getting an error message

    It says that there is an FTP error and cannot make connection to the host that the username or password is incorrect.   Please help

  • Virtual directory in iplanet web server 4.1

    Hi We are new to iplanet web server4.1 .we need to run the jsp files from weblogic 5.1.we have done the following configuration 1)changed the obj.conf file as per documents in weblogic. 2)changed the mime types for jsp from magnus-internal/jsp to tex