Satellite C660-13R - Wireless and Ethernet do not work after format

Hello there,
I just formatted my laptop and I only get Internet connection with a usb wireless antenna...
Neither ethernet, nor wireless seem to work. Before the format it worked fine.
Here is the product
http://www.toshiba.co.uk/discontinued-products/satellite-c660-13r/
Please help with a solution...
Should I consider death of the adapter and stop trying?

Ok you have formatted your laptop but we don't know what have you installed and which OS version do you use.
As I can see in notebook specification your notebook was delivered with preinstalled Windows 7. This original version (recovery image) contains all necessary drivers and every hardware component is installed and configured properly so everything should work well.
It is very important to know what have you installed and what is teh status of communication devices like LAN and WLAN cards. If both devices are installed properly LAN should work without any limitation but WLAN card must be enabled and I don't see the reason why you should not be able to connect your machine using WLAN connection.
If possible post some detailed info about preinstalled OS version and hardware status.

Similar Messages

I am using chat-r wireless and facetime is not working but when i put rogers fido or any other carrier sim in it work. Anyone know what the problem?

I am using chat-r wireless and facetime is not working but when i put rogers fido or any other carrier sim in it work. Anyone know what the problem?

I'm guessing it's a compatibility problem similar to that that T-Mobile in the US has. I'm not familiar with chat-r wireless, but I'm guessing it's not a supported carrier for the iPhone. If they can't tell you how to fix it, I'm guessing it's just plain not going to work.

My iMessage and facetime is not working after updating to ios 7... My ipad works perfectly and it's the same apple id. Any answers or reasons why on the iPhone 5 is not working???

My iMessage and facetime is not working after updating to ios 7...
Any answers on how to fix it? I've tried to restart, restore connected to itunes, but nothing.

ACTIVATING FACETIME AND IMESSAGES
Activating Facetime and Imessages on your phone requires the ability to send SMS messages and depending upon where you are that might be an international SMS. Check with your carrier to see if your plan supports sending of international SMS messages. If you are having trouble activating Facetime or Imessages turn them both off on your device and reset the device (Hold down the Sleep/Wake button and the home button together until the apple logo appears (ignore the ON/OFF slider) then let both buttons go and wait for device to restart (no data will be lost)). Wait for the device to restart and wait a minute and turn Facetime and imessage back on and wait for activation. If that does not fix things read the following articles:
http://support.apple.com/kb/TS4268
http://support.apple.com/kb/ts3367

The date and time is not working after setting it to current date and goes back to may,26 2011

the date and time is not working after setting it to current date and goes back to may,26 2011; 2 PM . I bought my ipod tocuh 4th gen on july 18th

On the iPod, make sure your Calendar is set to Gregorian (Settings > General > International > Calendar). Also make sure your date and time on your computer is correct as well as the Time Zones on both.

HT201412 my ipod 4G power button and volume button not working after updated to ios6. i also experience wifi issue. so deppresing!

my ipod 4G power button and volume button not working after updated to ios6.
i also experience wifi issue. my ipod can't detect any wifi signal.
so deppresing!
what should i do?
i can't put my ipod to sleep, can't adjust volume, can't shut off.
should i update to ios 6.1?
HELP

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar
When iOS 6.1 comes out I would update.

Touchsmart 520-1047c Mouse and Keyboard will not work after sleep mode

I have an issue which I need some help with. When my computer goes to sleep the wireless mouse and keyboard will not work unless I restart, however each one will wake the system up but will not operate after that. I have tried just making the display go to sleep, both go to sleep but that makes no difference same issue occurs. The only work around I have found is going into the power settings and turning the sleep mode off for booth the computer and display. This does not solve the problem it just masks it. New batteries, unplugged and replugged the dongle, updated the bios and all drivers. Don't know what else to try. Anybody know how to fix this? Thank you in advance for your help.

Hello , Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More. I understand that the mouse and keyboard on your desktop computer does not work if your computer enters sleep mode, and I would be happy to assist you in this matter! To correct this issue, I recommend following the steps in this document on Troubleshooting sleep and hibernate issues (Windows 7). This should help enable your system to wake from sleep mode using your wireless keyboard and mouse. I also recommend connecting wired peripherals to diagnose the functionality of your keyboard and mouse. If your system is still not able to wake from sleep mode, please follow the steps below to restore the default power schemes on your computer: Step 1. Click the Start button
Step 2. In the search box, type "Command Prompt"
Step 3. Right-click Command PromptStep 4. Click Run as administrator
Step 5. At the command prompt, type powercfg /restoredefaultschemes and press Enter reference: http://superuser.com/questions/669571/windows-8-1-64-bit-power-schemes-gone Please re-post with the results of your troubleshooting, as well as the requested information above. I look forward to your reply!
Regards

Office 2010 MUI in Finnish and Save and Send function not working after upgrading to Lync 2013 MUI

Problem is as follows. Used to have Office 2010, Outlook 2010 and Lync 2010, everything was working. People used it in Finnish and seemly quite a many of them used the Talleta ja lähetä (Save and Send in Finnish) in Office products.
After upgrading Lync to 2013 version, with Finnish language pack installed with it, the Save and send does not work in Office 2010 if it is used with Finnish as display language. When you try to use it you get a Mapi error and reason is undefined or something,
hard to say what it is exactly in english as the error message is in finnish. On those machines if the display language is changed back to english the Save and send works as it should.
Any ideas?

The problem was caused by the Language Packs for Lync 2013 or Office 2013. Without them all works.
And if you want to just unisntall the 2013 lang packs, then you also need to repair install the office 2010 ones to make it work again.

Illustrator CC 2014 open and place commands not working after installing Yosemite

How can I get Illustrator Open and Place commands to work after installing Yosemite?

Hello,
I also have the same problem, after 5 minutes I can't open or place anything in illustrator. I have this problem also in photoshop cc 2014. This started after installing Yosemite.
Tried to reinstall but nothing helps.
Today after updating creative cloud application it is even worse: illustrator is not opening anything: not even a new file. So I reinstalled... and I can open again for 5 minutes. But then it crashed while saving. Now I can't open illustrator at all...so nothing left to do then reinstalling again I suppose?

System sleep and shut down not working after upgrade to windows 10

HiI upgraded my OS from win 8.1 to win 10.After the upgrades the system shutdown and sleep are not working properly.It's like when I shutdown/sleep the system ,the screen shuts down but the power key keeps glowing and also the battery keeps draining.So eachtime I have to foercefully press the power button to shutdown the system. I have updated the display driver . Please someone suggest, what to do ?

Hi there , Thank you for visiting the HP Support Forums and Welcome! I read your post on the HP Support Forums and seen that you are having issues with your HP Pavilion 15-n260tx Notebook PC and the Sleep/Shut down options. It sounds like you might be having an issue with one of the features of Windows called Hybrid Shutdown that is used for the Fast Startup feature. Here are a couple of links for you about Fast Startup, Hybrid Shutdown and How to Shut down your Notebook completely. They also have some troubleshooting steps in them. 1. Fast Startup - Turn On or Off in Windows 10.2. Shut Down Computer in Windows 10. If those do not work, I do have some more documentation for you to read and try. 1. Shut down (turn off), sleep, or hibernate your PC - This document is from Microsoft. 2. HP Notebook PCs - Managing Power Options (Windows 8)3. HP PCs - Sleep and Hibernate Issues (Windows 10, 8) Sometimes a BIOS Update will work. You can update all of your drivers by going to the HP Driver's website or by using the HP Support Assistant. On the Driver's page there is not an update for the Windows 10 Column, but there was an update that just came out under Windows 8.1 on Aug 7, 2015 that should work for your Notebook. Another fix that may work is to Run the Troubleshooter. Please follow this link to run the Windows Update Troubleshooter. I hope this helps! Have a great day!

CFHTTP and Scheduled Tasks not working after CF8 Upgrade

I have recently upgraded to ColdFusion 8. My scheduled tasks
in the ColdFusion Administrator do not work anymore. I ran them
manually without the ColdFusion Administrator from the server and a
local machine via Internet Explorer 7 and they work. I tried to run
the same scheduled task with the same URL via CFHTTP in a CFM page
and this does not work. The logs are not giving me any error
messages. Has anyone run into this? Is this a bug with CF8 or even
an IIS issue? ColdFusion is on a Windows 2003 SP2 server.
Thanks,
Mike

<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML dir=ltr><HEAD><TITLE>The page cannot be displayed</TITLE>
<STYLE id=L_defaultr_1>A:link {
FONT: 8pt/11pt verdana; COLOR: #ff0000
A:visited {
FONT: 8pt/11pt verdana; COLOR: #4e4e4e
</STYLE>
<META content=NOINDEX name=ROBOTS>
<META http-equiv=Content-Type content="text-html; charset=UTF-8">
<META content="MSHTML 5.50.4522.1800" name=GENERATOR></HEAD>
<BODY bgColor=#ffffff>
<TABLE cellSpacing=5 cellPadding=3 width=410>
<TBODY>
<TR>
    <TD vAlign=center align=left width=360>
      <H1 id=L_defaultr_2 style="FONT: 13pt/15pt verdana; COLOR: #000000"><ID id=L_defaultr_3>The page cannot be displayed
</ID></H1></TD></TR>
<TR>
    <TD width=400 colSpan=2><FONT id=L_defaultr_4
      style="FONT: 8pt/11pt verdana; COLOR: #000000"><ID id=L_defaultr_5><B>Explanation: </B>There is a problem with the page you are trying to reach and it cannot be displayed.</ID></FONT></TD></TR>
<TR>
    <TD width=400 colSpan=2><FONT id=L_defaultr_6
      style="FONT: 8pt/11pt verdana; COLOR: #000000">
      <HR color=#c0c0c0 noShade>
      <P id=L_defaultr_7><B>Try the following:</B></P>
      <UL>
        <LI id=L_defaultr_8><B>Refresh page:</B> Search for the page again by clicking the Refresh button. The timeout may have occurred due to Internet congestion.
<LI id=L_defaultr_9><B>Check spelling:</B> Check that you typed the Web page address correctly. The address may have been mistyped.
<LI id=L_defaultr_10><B>Access from a link:</B> If there is a link to the page you are looking for, try accessing the page from that link.
      </UL>
      <HR color=#c0c0c0 noShade>
      <P id=L_defaultr_11>Technical Information (for support personnel)</P>
      <UL>
        <LI id=L_defaultr_12>Error Code: 400 Bad Request. The data is invalid. (13)
        </UL></FONT></TD></TR></TBODY></TABLE></BODY></HTML>

11.1.1.6.4 Repository variables for DSN and USER do not work after upgrade

Hi,
The Repository Variables OLAP_DSN and OLAP_USER no longer work after upgrading to 11.1.1.6.4 i.e they return a connection error when trying to import metadata but the connection is correct if explicitly set without the variable used.
I have tried the following resolution:
- From command line execute commands to set variable properties via admintool.exe /command vartext.txt
Open rpdname user password
SetProperty "Variable" "OLAP_DSN" Initializer "'ORCL.GLOBAL'"
Save
Close
Exit
This script works fine as demonstrated by commenting out Save, Close, Exit and running. But it does not resolve the problem.
The issue is consistent as in the OLAP_USER variable does not work if DNS for connection pool set to ORCL.GLOBAL.
Is this a bug?
Thanks in advance
Edited by: 983325 on 26-Feb-2013 02:35

There is a 3.1.0.5 client. First thing I would try is the newest client.
Sent from Cisco Technical Support iPad App

Glide pad will not work after formatting g60-630ca

Can somebody help? my glide pad will not work after downgrading to xp. The pad works itself for the mouse but then the scrolls on the side will not. Please help...

You need the driver. It is a Synaptics Touchpad and you can use this driver:
Synaptics
Here is a link to the General XP Downgrade guide which has a link to all the drivers you need under "Moderate models:
XP Guide
The touchpad is hard because Windows does load a basic driver so it does not appear with an error in Device Manager, but the "real" driver is needed for advanced features like scrolling. Be sure you have all the needed Xp drivers, by the way.

Satellite C660-17L - Some TouchPad functions are not working

My touch pad functions are not working:
- I can't use it to scroll up and down
- I can't use it to zoom.
What should I do to fix it?

Yes the model number is Satellite C660-17L
And no I didn't install the touchpad driver.
I Have had this laptop for less than a month, I started it one day and tried to scroll but it didn't work.
Also i tried to search for the advanced settings under the mouse option but I couldn't find it.
When I enter the search directly into the search bar, the mouse option comes up but when I click on it, it asks me if I want to uninstall the synaptics driver.
I have no idea what this means but I click no and it comes up with all the mouse setting options.
What should I do now?

Wifi and ethernet are not working in windows xp.

Hi I had to reformat my computer so I installed leopard 10.5 on it and then installed xp via bootcamp before updating to 10.5.6. WHen Im in windows xp It wont recongize my ethernet or wifi and I can not either to work by going to control panel I mean the icons are not even showing up. I cant update windows or anything since it has no internet.
Macbook pro 2.4ghz
4gb ram
Prior generations but dosnt have the new keyboard.

shamu3 wrote:
Im so stuiped thank you very much.
Not to see the wood for the trees...
Glad to be of help.
Have Fun
Stefan

Satellite A205-replaced HDD and recovery CD not working; media test failure

Please help,
My wife's computer crashed, it all started with windows\system32\en file corrupt or missing. Took it in to the geek squad and diagnostics test said hard drive corrupt.
(Trying to recover the data is another problem to solve later)
To save money I ordered a new HDD (WD320GB) installed the new HDD, inserted the recovery disc and get the following message:
Pre-boot execution Environment (PXE) v2.1
PXE-E61: Media test failure, check cable
PXE-M0F: Exiting PXE ROM
Operating System not found
I can see the new HDD in the BIOS, I've changed the boot order to start with CD/DVD drive but still get the message above.
What now?
Thanks for any help that I can get.

I want to say thanks to all who helped. The problem with recovery CD's not working was the DVD drive.
I was able to get a used DVD drive really cheap and was able to reinstall to factory condition.
Just for kicks once the install and all updates were completed I stuck the old DVD drive back in and still didn't work. So other than alot of time online and looking around for a DVD drive that would fit the laptop, I spent less than $10 for DVD drive and $65 for another hard drive which is good news, the bad news is my wife couldn't live anylonger without Facebook and bought another laptop, HP this time.
Well my daughter will have a Tosh to do her school projects.
Now to figure out what caused the crash, loss of data and DVD not to work in the first place.
Thanks again for all your help.
Happy New Year

Satellite C660-13R - Wireless and Ethernet do not work after format

Similar Messages

Maybe you are looking for