Satellite C660 - black screen after memory upgrade

Hi can anyone please help
trying to upgrade the ram on my C660, presently has 3GB - spoke to Toshiba and they told me the type to get and said as im running 64bit windows I could go to 8GB - so bought the following
DDR3 1066MHz sodimm - x 2@4GB --- from MyMemory.com ( 64 )
When I fitted it and switched back on the screen is just black.
Anybody got any ideas please as im in the middle of my assignments aaaaaahhhhhhhh!!!!!!
And any help would be really appreciated
John

Hello bodgerjohnny,
I had the same problem and resolved it... Here is my thread:
http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=61414&tstart=30
I hope your problem is just the same too...
Good luck!
Robert

Similar Messages

  • Lenovo G560 - Issue with won't boot and black screen after HDD upgrade

    Lenovo G560 - Issue with won't boot and black screen after HDD upgrade.
     What happen: My laptop was working fine, no blue screen issue, no funny business at all. I bought a new SSD Intel 120 GB and thought it would be a good idea to replace the HDD. I shutdown and disconnected the power adapter, waited a couple of minutes and removed the battery. I opened up the back case and replaced the HDD. And put all the screws back and put the battery back in.
    Problem: The very first time I turned the power on, nothing happens besides a black screen. I pressed the dvd drive it works and opens up and closes. I waited for about 30 mins and still has blac screen. When I mean black screen, no bios menu, no logo, just a black screen with the fan sound on.
    I have tried these:
    1. Unplugged everything - battery, adapter, and pressed the power on button for about 60 seconds, nothing, the laptop turns on with the LED display on for both on and battery LED's. But nothing but black screen, no sound of windows loading just the fan and black screen.
    2. I tried putting back my old 2.5" and nothing but black screen.
    Thoughts and suggestions?
    Solved!
    Go to Solution.

    Hi Autoexit173,
    Welcome to Lenovo Community!
     As per the query we understood that you are facing issue with system not booting in your Lenovo G560 laptop.
    As you have mentioned that the system not booting, please try to remove the RAM and  turn on the system and check if you can hear any beep sound. Also try to clean the RAM slots and check for the issue.
    Click here for the steps to remove the RAM and refer page number 40.
    Hope this helps. Do post back if issue persists!
    Best regards,       
    Ashwin.S
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Satellite M70 - Black screen after recovery installation

    So far what I have done is put in the Product Recovery DVD-ROM. Then when restarting my computer I was prompted to restore my computer to the factory defaults and said. After it went through that process it told me to remove the disc so I did. Now all it does is reach a black screen after the Toshiba screen that gives me the options to f2 for setup and f12 for options.
    I do not know what to do now to make my laptop work again. Please help.

    Satellite M70 is old notebook model and I would like to know do you use recovery disc for the first time. I had Satellite M70-159 long time ago and have installed recovery image many times.
    Which installations mode you have used: standard mode or expert mode?
    Try to install it again.
    As Xardas wrote try to obtain Microsoft installation disc and check if everything works well.

  • [SOLVED] Black screen after kdm upgrade

    Hi,
    I just did a pacman -Syu and at the next reboot when xdm was supposed to appear the only thing I got was a black screen. It's pitch-black as if turned off, not as if the background was black (laptop lcd)
    If I just enter my password blindly, it enters KDE and launches all the normal processes so it appears to be just a the screen being black.
    This is what I upgraded:
    [2014-09-29 00:13] [PACMAN] Running 'pacman -Syu'
    [2014-09-29 00:13] [PACMAN] synchronizing package lists
    [2014-09-29 00:13] [PACMAN] starting full system upgrade
    [2014-09-29 00:15] [PACMAN] upgraded ansible (1.7.1-3 -> 1.7.2-1)
    [2014-09-29 00:15] [PACMAN] upgraded grantlee-qt4 (0.5.0-2 -> 0.5.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded qtwebkit (2.3.3-2 -> 2.3.4-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdelibs (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdepimlibs (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded libbaloo4 (4.14.0-3 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded baloo4-akonadi (4.14.0-3 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded baloo4 (4.14.0-3 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded baloo4-widgets (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded bash (4.3.024-2 -> 4.3.026-1)
    [2014-09-29 00:15] [PACMAN] upgraded curl (7.38.0-1 -> 7.38.0-2)
    [2014-09-29 00:15] [PACMAN] upgraded e2fsprogs (1.42.11-1 -> 1.42.12-1)
    [2014-09-29 00:15] [PACMAN] upgraded flac (1.3.0-3 -> 1.3.0-4)
    [2014-09-29 00:15] [PACMAN] upgraded ghostscript (9.14-1 -> 9.15-1)
    [2014-09-29 00:15] [PACMAN] upgraded p11-kit (0.20.2-1 -> 0.20.7-3)
    [2014-09-29 00:15] [PACMAN] upgraded gnutls (3.3.8-1 -> 3.3.8-2)
    [2014-09-29 00:15] [PACMAN] upgraded groff (1.22.2-6 -> 1.22.2-7)
    [2014-09-29 00:15] [PACMAN] upgraded kde-base-artwork (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kde-wallpapers (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded oxygen-icons (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdebase-runtime (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdebase-lib (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdebase-dolphin (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdebase-katepart (4.14.0-2 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdebase-kdepasswd (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdebase-kdialog (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdebase-keditbookmarks (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdebase-kfind (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdebase-konqueror (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdebase-konq-plugins (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdebase-konsole (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdebase-kwrite (4.14.0-2 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdebase-plasma (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdepim-runtime (4.14.0-3 -> 4.14.1-1)
    [2014-09-29 00:15] [ALPM] warning: /usr/share/config/kdm/kdmrc installed as /usr/share/config/kdm/kdmrc.pacnew
    [2014-09-29 00:15] [PACMAN] upgraded kdebase-workspace (4.11.11-2 -> 4.11.12-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdeedu-marble (4.14.0-1 -> 4.14.1-2)
    [2014-09-29 00:15] [PACMAN] upgraded libkipi (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded libkdcraw (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdegraphics-gwenview (4.14.0-2 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdegraphics-kamera (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdegraphics-kcolorchooser (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdegraphics-kgamma (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdegraphics-kolourpaint (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdegraphics-kruler (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdegraphics-ksnapshot (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdegraphics-mobipocket (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded libkexiv2 (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded poppler (0.26.4-1 -> 0.26.5-1)
    [2014-09-29 00:15] [PACMAN] upgraded poppler-qt4 (0.26.4-1 -> 0.26.5-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdegraphics-okular (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded libkcddb (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded libkcompactdisc (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdemultimedia-audiocd-kio (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdemultimedia-dragonplayer (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdemultimedia-juk (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdemultimedia-kmix (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdemultimedia-kscd (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdemultimedia-mplayerthumbs (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdenetwork-kopete (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdeplasma-addons-applets-bball (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdeplasma-addons-applets-binary-clock (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdeplasma-addons-applets-blackboard (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdeplasma-addons-applets-bookmarks (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdeplasma-addons-applets-bubblemon (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdeplasma-addons-applets-calculator (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdeplasma-addons-applets-charselect (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdeplasma-addons-libs (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdeplasma-addons-applets-comic (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdeplasma-addons-applets-community (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdeplasma-addons-applets-dict (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdeplasma-addons-applets-eyes (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdeplasma-addons-applets-fifteenpuzzle (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdeplasma-addons-applets-filewatcher (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdeplasma-addons-applets-frame (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdeplasma-addons-applets-fuzzy-clock (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdeplasma-addons-applets-icontasks (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdeplasma-addons-applets-incomingmsg (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdeplasma-addons-applets-kimpanel (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdeplasma-addons-applets-knowledgebase (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdeplasma-addons-applets-kolourpicker (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdeplasma-addons-applets-konqprofiles (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdeplasma-addons-applets-konsoleprofiles (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdeplasma-addons-applets-lancelot (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdeplasma-addons-applets-leavenote (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdeplasma-addons-applets-life (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdeplasma-addons-applets-luna (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdeplasma-addons-applets-magnifique (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdeplasma-addons-applets-mediaplayer (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdeplasma-addons-applets-microblog (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdeplasma-addons-applets-news (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdeplasma-addons-applets-notes (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdeplasma-addons-applets-nowplaying (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdeplasma-addons-applets-paste (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdeplasma-addons-applets-pastebin (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdeplasma-addons-applets-plasmaboard (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdeplasma-addons-applets-previewer (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdeplasma-addons-applets-qalculate (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdeplasma-addons-applets-rememberthemilk (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdeplasma-addons-applets-rssnow (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdeplasma-addons-applets-showdashboard (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdeplasma-addons-applets-showdesktop (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdeplasma-addons-applets-social-news (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdeplasma-addons-applets-spellcheck (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdeplasma-addons-applets-systemloadviewer (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdeplasma-addons-applets-timer (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdeplasma-addons-applets-unitconverter (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdeplasma-addons-applets-weather (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdeplasma-addons-applets-weatherstation (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdeplasma-addons-applets-webslice (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdeplasma-addons-containments (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdeplasma-addons-runners-audioplayercontrol (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdeplasma-addons-runners-browserhistory (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdeplasma-addons-runners-characters (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdeplasma-addons-runners-contacts (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdeplasma-addons-runners-converter (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdeplasma-addons-runners-datetime (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdeplasma-addons-runners-dictionary (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdeplasma-addons-runners-events (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdesdk-kate (4.14.0-2 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdeplasma-addons-runners-katesessions (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdeplasma-addons-runners-konquerorsessions (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdeplasma-addons-runners-konsolesessions (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdeplasma-addons-runners-kopete (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdeplasma-addons-runners-mediawiki (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdeplasma-addons-runners-spellchecker (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdeplasma-addons-runners-translator (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdeplasma-addons-runners-youtube (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdeplasma-addons-wallpapers-mandelbrot (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdeplasma-addons-wallpapers-marble (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdeplasma-addons-wallpapers-pattern (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdeplasma-addons-wallpapers-potd (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdeplasma-addons-wallpapers-qmlwallpapers (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdeplasma-addons-wallpapers-virus (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdeplasma-addons-wallpapers-weather (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdeutils-ark (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdeutils-filelight (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdeutils-kcalc (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdeutils-kcharselect (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdeutils-kdf (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdeutils-kfloppy (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdeutils-kgpg (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdeutils-kremotecontrol (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdeutils-ktimer (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdeutils-kwalletmanager (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdeutils-print-manager (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdeutils-superkaramba (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdeutils-sweeper (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded less (458-1 -> 468-1)
    [2014-09-29 00:15] [PACMAN] upgraded libmariadbclient (10.0.13-1 -> 10.0.14-1)
    [2014-09-29 00:15] [PACMAN] upgraded libpipeline (1.3.0-1 -> 1.3.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded libreoffice-fresh (4.3.1-1 -> 4.3.2-1)
    [2014-09-29 00:15] [PACMAN] upgraded man-pages (3.72-1 -> 3.73-1)
    [2014-09-29 00:15] [PACMAN] upgraded mariadb-clients (10.0.13-1 -> 10.0.14-1)
    [2014-09-29 00:15] [PACMAN] upgraded mariadb (10.0.13-1 -> 10.0.14-1)
    [2014-09-29 00:15] [PACMAN] upgraded poppler-glib (0.26.4-1 -> 0.26.5-1)
    [2014-09-29 00:15] [PACMAN] upgraded python2-setuptools (1:5.8-1 -> 1:6.0.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded sdl (1.2.15-6 -> 1.2.15-7)
    [2014-09-29 00:15] [PACMAN] upgraded sudo (1.8.10.p3-1 -> 1.8.11-1)
    [2014-09-29 00:15] [PACMAN] upgraded tzdata (2014g-1 -> 2014h-1)
    I have substituted xdmrc for kdmrc.pacnew to no avail. I have reinstalled nvidia and kdebase-workspace. kdm.log:
    X.Org X Server 1.16.1
    Release Date: 2014-09-21
    X Protocol Version 11, Revision 0
    Build Operating System: Linux 3.16.1-1-ARCH x86_64
    Current Operating System: Linux feynman 3.16.3-1-ARCH #1 SMP PREEMPT Wed Sep 17 21:54:13 CEST 2014 x86_64
    Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=a4d99c8f-d440-46c2-aa60-bf3e5c4ef4c5 rw quiet
    Build Date: 21 September 2014 10:53:13AM
    Current version of pixman: 0.32.6
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    (==) Log file: "/var/log/Xorg.0.log", Time: Mon Sep 29 00:26:11 2014
    (==) Using config file: "/etc/X11/xorg.conf"
    (==) Using system config directory "/usr/share/X11/xorg.conf.d"
    klauncher(590) kdemain: No DBUS session-bus found. Check if you have started the DBUS server.
    kdeinit4: Communication error with launcher. Exiting!
    kdmgreet(584)/kdecore (K*TimeZone*): KSystemTimeZones: ktimezoned initialize() D-Bus call failed: "Not connected to D-Bus server"
    kdmgreet(584)/kdecore (K*TimeZone*): No time zone information obtained from ktimezoned
    KCrash: Application 'kdmgreet' crashing...
    KCrash: Attempting to start /usr/lib/kde4/libexec/drkonqi directly
    QThread::wait: Thread tried to wait on itself
    QThread: Destroyed while thread is still running
    (EE) Server terminated successfully (0). Closing log file.
    KCrash: Application 'kdmgreet' crashing...
    KCrash: Attempting to start /usr/lib/kde4/libexec/drkonqi directly
    (EE) Server terminated successfully (0). Closing log file.
    drkonqi: cannot connect to X server :0
    KCrash: Application 'kdmgreet' crashing...
    KCrash: Attempting to start /usr/lib/kde4/libexec/drkonqi directly
    (EE) Server terminated successfully (0). Closing log file.
    drkonqi: cannot connect to X server :0
    KCrash: Application 'kdmgreet' crashing...
    KCrash: Attempting to start /usr/lib/kde4/libexec/drkonqi directly
    QThread::wait: Thread tried to wait on itself
    QThread: Destroyed while thread is still running
    (EE) Server terminated successfully (0). Closing log file.
    removing GPU device /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0/drm/card1 /dev/dri/card1
    (EE) Server terminated successfully (0). Closing log file.
    KCrash: Application 'kdmgreet' crashing...
    KCrash: Attempting to start /usr/lib/kde4/libexec/drkonqi directly
    drkonqi: cannot connect to X server :0
    X.Org X Server 1.16.1
    Release Date: 2014-09-21
    X Protocol Version 11, Revision 0
    Build Operating System: Linux 3.16.1-1-ARCH x86_64
    Current Operating System: Linux feynman 3.16.3-1-ARCH #1 SMP PREEMPT Wed Sep 17 21:54:13 CEST 2014 x86_64
    Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=a4d99c8f-d440-46c2-aa60-bf3e5c4ef4c5 rw quiet
    Build Date: 21 September 2014 10:53:13AM
    Current version of pixman: 0.32.6
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    (==) Log file: "/var/log/Xorg.0.log", Time: Mon Sep 29 00:55:05 2014
    (==) Using config file: "/etc/X11/xorg.conf"
    (==) Using system config directory "/usr/share/X11/xorg.conf.d"
    klauncher(611) kdemain: No DBUS session-bus found. Check if you have started the DBUS server.
    kdeinit4: Communication error with launcher. Exiting!
    kdmgreet(605)/kdecore (K*TimeZone*): KSystemTimeZones: ktimezoned initialize() D-Bus call failed: "Not connected to D-Bus server"
    kdmgreet(605)/kdecore (K*TimeZone*): No time zone information obtained from ktimezoned
    KCrash: Application 'kdmgreet' crashing...
    KCrash: Attempting to start /usr/lib/kde4/libexec/drkonqi directly
    QThread::wait: Thread tried to wait on itself
    QThread: Destroyed while thread is still running
    (EE) Server terminated successfully (0). Closing log file.
    X.Org X Server 1.16.1
    Release Date: 2014-09-21
    X Protocol Version 11, Revision 0
    Build Operating System: Linux 3.16.1-1-ARCH x86_64
    Current Operating System: Linux feynman 3.16.3-1-ARCH #1 SMP PREEMPT Wed Sep 17 21:54:13 CEST 2014 x86_64
    Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=a4d99c8f-d440-46c2-aa60-bf3e5c4ef4c5 rw quiet
    Build Date: 21 September 2014 10:53:13AM
    Current version of pixman: 0.32.6
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    (==) Log file: "/var/log/Xorg.0.log", Time: Mon Sep 29 00:58:58 2014
    (==) Using config file: "/etc/X11/xorg.conf"
    (==) Using system config directory "/usr/share/X11/xorg.conf.d"
    klauncher(669) kdemain: No DBUS session-bus found. Check if you have started the DBUS server.
    kdeinit4: Communication error with launcher. Exiting!
    kdmgreet(663)/kdecore (K*TimeZone*): KSystemTimeZones: ktimezoned initialize() D-Bus call failed: "Not connected to D-Bus server"
    kdmgreet(663)/kdecore (K*TimeZone*): No time zone information obtained from ktimezoned
    KCrash: Application 'kdmgreet' crashing...
    KCrash: Attempting to start /usr/lib/kde4/libexec/drkonqi directly
    QThread::wait: Thread tried to wait on itself
    QThread: Destroyed while thread is still running
    (EE) Server terminated successfully (0). Closing log file.
    X.Org X Server 1.16.1
    Release Date: 2014-09-21
    X Protocol Version 11, Revision 0
    Build Operating System: Linux 3.16.1-1-ARCH x86_64
    Current Operating System: Linux feynman 3.16.3-1-ARCH #1 SMP PREEMPT Wed Sep 17 21:54:13 CEST 2014 x86_64
    Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=a4d99c8f-d440-46c2-aa60-bf3e5c4ef4c5 rw quiet
    Build Date: 21 September 2014 10:53:13AM
    Current version of pixman: 0.32.6
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    (==) Log file: "/var/log/Xorg.0.log", Time: Mon Sep 29 00:59:51 2014
    (==) Using config file: "/etc/X11/xorg.conf"
    (==) Using system config directory "/usr/share/X11/xorg.conf.d"
    klauncher(707) kdemain: No DBUS session-bus found. Check if you have started the DBUS server.
    kdeinit4: Communication error with launcher. Exiting!
    kdmgreet(701)/kdecore (K*TimeZone*): KSystemTimeZones: ktimezoned initialize() D-Bus call failed: "Not connected to D-Bus server"
    kdmgreet(701)/kdecore (K*TimeZone*): No time zone information obtained from ktimezoned
    KCrash: Application 'kdmgreet' crashing...
    KCrash: Attempting to start /usr/lib/kde4/libexec/drkonqi directly
    QThread::wait: Thread tried to wait on itself
    QThread: Destroyed while thread is still running
    (EE) Server terminated successfully (0). Closing log file.
    X.Org X Server 1.16.1
    Release Date: 2014-09-21
    X Protocol Version 11, Revision 0
    Build Operating System: Linux 3.16.1-1-ARCH x86_64
    Current Operating System: Linux feynman 3.16.3-1-ARCH #1 SMP PREEMPT Wed Sep 17 21:54:13 CEST 2014 x86_64
    Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=a4d99c8f-d440-46c2-aa60-bf3e5c4ef4c5 rw quiet
    Build Date: 21 September 2014 10:53:13AM
    Current version of pixman: 0.32.6
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    (==) Log file: "/var/log/Xorg.0.log", Time: Mon Sep 29 01:05:09 2014
    (==) Using config file: "/etc/X11/xorg.conf"
    (==) Using system config directory "/usr/share/X11/xorg.conf.d"
    klauncher(770) kdemain: No DBUS session-bus found. Check if you have started the DBUS server.
    kdeinit4: Communication error with launcher. Exiting!
    kdmgreet(764)/kdecore (K*TimeZone*): KSystemTimeZones: ktimezoned initialize() D-Bus call failed: "Not connected to D-Bus server"
    kdmgreet(764)/kdecore (K*TimeZone*): No time zone information obtained from ktimezoned
    KCrash: Application 'kdmgreet' crashing...
    KCrash: Attempting to start /usr/lib/kde4/libexec/drkonqi directly
    QThread::wait: Thread tried to wait on itself
    QThread: Destroyed while thread is still running
    (EE) Server terminated successfully (0). Closing log file.
    X.Org X Server 1.16.1
    Release Date: 2014-09-21
    X Protocol Version 11, Revision 0
    Build Operating System: Linux 3.16.1-1-ARCH x86_64
    Current Operating System: Linux feynman 3.16.3-1-ARCH #1 SMP PREEMPT Wed Sep 17 21:54:13 CEST 2014 x86_64
    Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=a4d99c8f-d440-46c2-aa60-bf3e5c4ef4c5 rw quiet
    Build Date: 21 September 2014 10:53:13AM
    Current version of pixman: 0.32.6
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    (==) Log file: "/var/log/Xorg.0.log", Time: Mon Sep 29 01:11:34 2014
    (==) Using config file: "/etc/X11/xorg.conf"
    (==) Using system config directory "/usr/share/X11/xorg.conf.d"
    klauncher(813) kdemain: No DBUS session-bus found. Check if you have started the DBUS server.
    kdeinit4: Communication error with launcher. Exiting!
    kdmgreet(807)/kdecore (K*TimeZone*): KSystemTimeZones: ktimezoned initialize() D-Bus call failed: "Not connected to D-Bus server"
    kdmgreet(807)/kdecore (K*TimeZone*): No time zone information obtained from ktimezoned
    KCrash: Application 'kdmgreet' crashing...
    KCrash: Attempting to start /usr/lib/kde4/libexec/drkonqi directly
    QThread::wait: Thread tried to wait on itself
    QThread: Destroyed while thread is still running
    (EE) Server terminated successfully (0). Closing log file.
    X.Org X Server 1.16.1
    Release Date: 2014-09-21
    X Protocol Version 11, Revision 0
    Build Operating System: Linux 3.16.1-1-ARCH x86_64
    Current Operating System: Linux feynman 3.16.3-1-ARCH #1 SMP PREEMPT Wed Sep 17 21:54:13 CEST 2014 x86_64
    Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=a4d99c8f-d440-46c2-aa60-bf3e5c4ef4c5 rw quiet
    Build Date: 21 September 2014 10:53:13AM
    Current version of pixman: 0.32.6
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    (==) Log file: "/var/log/Xorg.0.log", Time: Mon Sep 29 01:16:56 2014
    (==) Using config file: "/etc/X11/xorg.conf"
    (==) Using system config directory "/usr/share/X11/xorg.conf.d"
    klauncher(859) kdemain: No DBUS session-bus found. Check if you have started the DBUS server.
    kdeinit4: Communication error with launcher. Exiting!
    kdmgreet(853)/kdecore (K*TimeZone*): KSystemTimeZones: ktimezoned initialize() D-Bus call failed: "Not connected to D-Bus server"
    kdmgreet(853)/kdecore (K*TimeZone*): No time zone information obtained from ktimezoned
    KCrash: Application 'kdmgreet' crashing...
    KCrash: Attempting to start /usr/lib/kde4/libexec/drkonqi directly
    QThread::wait: Thread tried to wait on itself
    QThread: Destroyed while thread is still running
    (EE) Server terminated successfully (0). Closing log file.
    KCrash: Application 'kdmgreet' crashing...
    KCrash: Attempting to start /usr/lib/kde4/libexec/drkonqi directly
    (EE) Server terminated successfully (0). Closing log file.
    drkonqi: cannot connect to X server :0
    KCrash: Application 'kdmgreet' crashing...
    KCrash: Attempting to start /usr/lib/kde4/libexec/drkonqi directly
    (EE) Server terminated successfully (0). Closing log file.
    drkonqi: cannot connect to X server :0
    X.Org X Server 1.16.1
    Release Date: 2014-09-21
    X Protocol Version 11, Revision 0
    Build Operating System: Linux 3.16.1-1-ARCH x86_64
    Current Operating System: Linux feynman 3.16.3-1-ARCH #1 SMP PREEMPT Wed Sep 17 21:54:13 CEST 2014 x86_64
    Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=a4d99c8f-d440-46c2-aa60-bf3e5c4ef4c5 rw quiet
    Build Date: 21 September 2014 10:53:13AM
    Current version of pixman: 0.32.6
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    (==) Log file: "/var/log/Xorg.0.log", Time: Mon Sep 29 01:31:24 2014
    (==) Using config file: "/etc/X11/xorg.conf"
    (==) Using system config directory "/usr/share/X11/xorg.conf.d"
    klauncher(1018) kdemain: No DBUS session-bus found. Check if you have started the DBUS server.
    kdeinit4: Communication error with launcher. Exiting!
    kdmgreet(1012)/kdecore (K*TimeZone*): KSystemTimeZones: ktimezoned initialize() D-Bus call failed: "Not connected to D-Bus server"
    kdmgreet(1012)/kdecore (K*TimeZone*): No time zone information obtained from ktimezoned
    KCrash: Application 'kdmgreet' crashing...
    KCrash: Attempting to start /usr/lib/kde4/libexec/drkonqi directly
    QThread::wait: Thread tried to wait on itself
    QThread: Destroyed while thread is still running
    drkonqi: cannot connect to X server :0
    (EE) Server terminated successfully (0). Closing log file.
    X.Org X Server 1.16.1
    Release Date: 2014-09-21
    X Protocol Version 11, Revision 0
    Build Operating System: Linux 3.16.1-1-ARCH x86_64
    Current Operating System: Linux feynman 3.16.3-1-ARCH #1 SMP PREEMPT Wed Sep 17 21:54:13 CEST 2014 x86_64
    Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=a4d99c8f-d440-46c2-aa60-bf3e5c4ef4c5 rw quiet
    Build Date: 21 September 2014 10:53:13AM
    Current version of pixman: 0.32.6
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    (==) Log file: "/var/log/Xorg.0.log", Time: Mon Sep 29 01:34:39 2014
    (==) Using config file: "/etc/X11/xorg.conf"
    (==) Using system config directory "/usr/share/X11/xorg.conf.d"
    removing GPU device /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0/drm/card1 /dev/dri/card1
    klauncher(501) kdemain: No DBUS session-bus found. Check if you have started the DBUS server.
    kdeinit4: Communication error with launcher. Exiting!
    kdmgreet(495)/kdecore (K*TimeZone*): KSystemTimeZones: ktimezoned initialize() D-Bus call failed: "Not connected to D-Bus server"
    kdmgreet(495)/kdecore (K*TimeZone*): No time zone information obtained from ktimezoned
    KCrash: Application 'kdmgreet' crashing...
    KCrash: Attempting to start /usr/lib/kde4/libexec/drkonqi directly
    (EE) Server terminated successfully (0). Closing log file.
    QThread::wait: Thread tried to wait on itself
    QThread: Destroyed while thread is still running
    X.Org X Server 1.16.1
    Release Date: 2014-09-21
    X Protocol Version 11, Revision 0
    Build Operating System: Linux 3.16.1-1-ARCH x86_64
    Current Operating System: Linux feynman 3.16.3-1-ARCH #1 SMP PREEMPT Wed Sep 17 21:54:13 CEST 2014 x86_64
    Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=a4d99c8f-d440-46c2-aa60-bf3e5c4ef4c5 rw quiet
    Build Date: 21 September 2014 10:53:13AM
    Current version of pixman: 0.32.6
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    (==) Log file: "/var/log/Xorg.0.log", Time: Mon Sep 29 01:39:30 2014
    (==) Using config file: "/etc/X11/xorg.conf"
    (==) Using system config directory "/usr/share/X11/xorg.conf.d"
    removing GPU device /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0/drm/card1 /dev/dri/card1
    klauncher(641) kdemain: No DBUS session-bus found. Check if you have started the DBUS server.
    kdeinit4: Communication error with launcher. Exiting!
    kdmgreet(635)/kdecore (K*TimeZone*): KSystemTimeZones: ktimezoned initialize() D-Bus call failed: "Not connected to D-Bus server"
    kdmgreet(635)/kdecore (K*TimeZone*): No time zone information obtained from ktimezoned
    KCrash: Application 'kdmgreet' crashing...
    KCrash: Attempting to start /usr/lib/kde4/libexec/drkonqi directly
    QThread::wait: Thread tried to wait on itself
    QThread: Destroyed while thread is still running
    (EE) Server terminated successfully (0). Closing log file.
    X.Org X Server 1.16.1
    Release Date: 2014-09-21
    X Protocol Version 11, Revision 0
    Build Operating System: Linux 3.16.1-1-ARCH x86_64
    Current Operating System: Linux feynman 3.16.3-1-ARCH #1 SMP PREEMPT Wed Sep 17 21:54:13 CEST 2014 x86_64
    Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=a4d99c8f-d440-46c2-aa60-bf3e5c4ef4c5 rw quiet
    Build Date: 21 September 2014 10:53:13AM
    Current version of pixman: 0.32.6
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    (==) Log file: "/var/log/Xorg.0.log", Time: Mon Sep 29 01:41:32 2014
    (==) Using config file: "/etc/X11/xorg.conf"
    (==) Using system config directory "/usr/share/X11/xorg.conf.d"
    klauncher(724) kdemain: No DBUS session-bus found. Check if you have started the DBUS server.
    kdeinit4: Communication error with launcher. Exiting!
    kdmgreet(718)/kdecore (K*TimeZone*): KSystemTimeZones: ktimezoned initialize() D-Bus call failed: "Not connected to D-Bus server"
    kdmgreet(718)/kdecore (K*TimeZone*): No time zone information obtained from ktimezoned
    KCrash: Application 'kdmgreet' crashing...
    KCrash: Attempting to start /usr/lib/kde4/libexec/drkonqi directly
    QThread::wait: Thread tried to wait on itself
    QThread: Destroyed while thread is still running
    (EE) Server terminated successfully (0). Closing log file.
    X.Org X Server 1.16.1
    Release Date: 2014-09-21
    X Protocol Version 11, Revision 0
    Build Operating System: Linux 3.16.1-1-ARCH x86_64
    Current Operating System: Linux feynman 3.16.3-1-ARCH #1 SMP PREEMPT Wed Sep 17 21:54:13 CEST 2014 x86_64
    Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=a4d99c8f-d440-46c2-aa60-bf3e5c4ef4c5 rw quiet
    Build Date: 21 September 2014 10:53:13AM
    Current version of pixman: 0.32.6
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    (==) Log file: "/var/log/Xorg.0.log", Time: Mon Sep 29 01:48:30 2014
    (==) Using config file: "/etc/X11/xorg.conf"
    (==) Using system config directory "/usr/share/X11/xorg.conf.d"
    removing GPU device /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0/drm/card1 /dev/dri/card1
    klauncher(479) kdemain: No DBUS session-bus found. Check if you have started the DBUS server.
    kdeinit4: Communication error with launcher. Exiting!
    kdmgreet(473)/kdecore (K*TimeZone*): KSystemTimeZones: ktimezoned initialize() D-Bus call failed: "Not connected to D-Bus server"
    kdmgreet(473)/kdecore (K*TimeZone*): No time zone information obtained from ktimezoned
    journalctl -b:
    -- Logs begin at Sun 2014-07-13 21:42:22 BST, end at Mon 2014-09-29 01:48:53 BST. --
    Sep 29 01:48:24 feynman systemd-journal[193]: Runtime journal is using 8.0M (max allowed 393.9M, trying to leave 590.8M free of 3.8G available → current limit 393.9M).
    Sep 29 01:48:24 feynman systemd-journal[193]: Runtime journal is using 8.0M (max allowed 393.9M, trying to leave 590.8M free of 3.8G available → current limit 393.9M).
    Sep 29 01:48:24 feynman kernel: Initializing cgroup subsys cpuset
    Sep 29 01:48:24 feynman kernel: Initializing cgroup subsys cpu
    Sep 29 01:48:24 feynman kernel: Initializing cgroup subsys cpuacct
    Sep 29 01:48:24 feynman kernel: Linux version 3.16.3-1-ARCH (nobody@var-lib-archbuild-testing-x86_64-tobias) (gcc version 4.9.1 20140903 (prerelease) (GCC) ) #1 SMP PREEMPT Wed Sep 17 21:54:13 CEST 2014
    Sep 29 01:48:24 feynman kernel: Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=a4d99c8f-d440-46c2-aa60-bf3e5c4ef4c5 rw quiet
    Sep 29 01:48:24 feynman kernel: e820: BIOS-provided physical RAM map:
    Sep 29 01:48:24 feynman kernel: BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
    Sep 29 01:48:24 feynman kernel: BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
    Sep 29 01:48:24 feynman kernel: BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
    Sep 29 01:48:24 feynman kernel: BIOS-e820: [mem 0x0000000000100000-0x00000000b96e1fff] usable
    Sep 29 01:48:24 feynman kernel: BIOS-e820: [mem 0x00000000b96e2000-0x00000000b96e8fff] ACPI NVS
    Sep 29 01:48:24 feynman kernel: BIOS-e820: [mem 0x00000000b96e9000-0x00000000b9ec6fff] usable
    Sep 29 01:48:24 feynman kernel: BIOS-e820: [mem 0x00000000b9ec7000-0x00000000ba151fff] reserved
    Sep 29 01:48:24 feynman kernel: BIOS-e820: [mem 0x00000000ba152000-0x00000000c9586fff] usable
    Sep 29 01:48:24 feynman kernel: BIOS-e820: [mem 0x00000000c9587000-0x00000000c9a63fff] reserved
    Sep 29 01:48:24 feynman kernel: BIOS-e820: [mem 0x00000000c9a64000-0x00000000c9a97fff] usable
    Sep 29 01:48:24 feynman kernel: BIOS-e820: [mem 0x00000000c9a98000-0x00000000c9b7dfff] ACPI NVS
    Sep 29 01:48:24 feynman kernel: BIOS-e820: [mem 0x00000000c9b7e000-0x00000000c9ffefff] reserved
    Sep 29 01:48:24 feynman kernel: BIOS-e820: [mem 0x00000000c9fff000-0x00000000c9ffffff] usable
    Sep 29 01:48:24 feynman kernel: BIOS-e820: [mem 0x00000000cd000000-0x00000000cf1fffff] reserved
    Sep 29 01:48:24 feynman kernel: BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
    Sep 29 01:48:24 feynman kernel: BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
    Sep 29 01:48:24 feynman kernel: BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
    Sep 29 01:48:24 feynman kernel: BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
    Sep 29 01:48:24 feynman kernel: BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
    Sep 29 01:48:24 feynman kernel: BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
    Sep 29 01:48:24 feynman kernel: BIOS-e820: [mem 0x0000000100000000-0x000000022fdfffff] usable
    Sep 29 01:48:24 feynman kernel: NX (Execute Disable) protection: active
    Sep 29 01:48:24 feynman kernel: SMBIOS 2.7 present.
    Sep 29 01:48:24 feynman kernel: DMI: Notebook W350STQ/W370ST /W350STQ/W370ST , BIOS 4.6.5 06/14/2013
    Sep 29 01:48:24 feynman kernel: e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
    Sep 29 01:48:24 feynman kernel: e820: remove [mem 0x000a0000-0x000fffff] usable
    Sep 29 01:48:24 feynman kernel: AGP: No AGP bridge found
    Sep 29 01:48:24 feynman kernel: e820: last_pfn = 0x22fe00 max_arch_pfn = 0x400000000
    Sep 29 01:48:24 feynman kernel: MTRR default type: uncachable
    Sep 29 01:48:24 feynman kernel: MTRR fixed ranges enabled:
    Sep 29 01:48:24 feynman kernel: 00000-9FFFF write-back
    Sep 29 01:48:24 feynman kernel: A0000-BFFFF uncachable
    Sep 29 01:48:24 feynman kernel: C0000-CFFFF write-protect
    Sep 29 01:48:24 feynman kernel: D0000-E7FFF uncachable
    Sep 29 01:48:24 feynman kernel: E8000-FFFFF write-protect
    Sep 29 01:48:24 feynman kernel: MTRR variable ranges enabled:
    Sep 29 01:48:24 feynman kernel: 0 base 0000000000 mask 7E00000000 write-back
    Sep 29 01:48:24 feynman kernel: 1 base 0200000000 mask 7FE0000000 write-back
    Sep 29 01:48:24 feynman kernel: 2 base 0220000000 mask 7FF0000000 write-back
    Sep 29 01:48:24 feynman kernel: 3 base 00E0000000 mask 7FE0000000 uncachable
    Sep 29 01:48:24 feynman kernel: 4 base 00D0000000 mask 7FF0000000 uncachable
    Sep 29 01:48:24 feynman kernel: 5 base 00CE000000 mask 7FFE000000 uncachable
    Sep 29 01:48:24 feynman kernel: 6 base 00CD000000 mask 7FFF000000 uncachable
    Sep 29 01:48:24 feynman kernel: 7 base 022FE00000 mask 7FFFE00000 uncachable
    Sep 29 01:48:24 feynman kernel: 8 disabled
    Sep 29 01:48:24 feynman kernel: 9 disabled
    Sep 29 01:48:24 feynman kernel: x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    Sep 29 01:48:24 feynman kernel: e820: update [mem 0xcd000000-0xffffffff] usable ==> reserved
    Sep 29 01:48:24 feynman kernel: e820: last_pfn = 0xca000 max_arch_pfn = 0x400000000
    Sep 29 01:48:24 feynman kernel: found SMP MP-table at [mem 0x000fd7f0-0x000fd7ff] mapped at [ffff8800000fd7f0]
    Sep 29 01:48:24 feynman kernel: Scanning 1 areas for low memory corruption
    Sep 29 01:48:24 feynman kernel: Base memory trampoline at [ffff880000097000] 97000 size 24576
    Sep 29 01:48:24 feynman kernel: Using GB pages for direct mapping
    Sep 29 01:48:24 feynman kernel: init_memory_mapping: [mem 0x00000000-0x000fffff]
    Sep 29 01:48:24 feynman kernel: [mem 0x00000000-0x000fffff] page 4k
    Sep 29 01:48:24 feynman kernel: BRK [0x01b23000, 0x01b23fff] PGTABLE
    Sep 29 01:48:24 feynman kernel: BRK [0x01b24000, 0x01b24fff] PGTABLE
    Sep 29 01:48:24 feynman kernel: BRK [0x01b25000, 0x01b25fff] PGTABLE
    Sep 29 01:48:24 feynman kernel: init_memory_mapping: [mem 0x22fc00000-0x22fdfffff]
    Sep 29 01:48:24 feynman kernel: [mem 0x22fc00000-0x22fdfffff] page 2M
    Sep 29 01:48:24 feynman kernel: BRK [0x01b26000, 0x01b26fff] PGTABLE
    Sep 29 01:48:24 feynman kernel: init_memory_mapping: [mem 0x22c000000-0x22fbfffff]
    Sep 29 01:48:24 feynman kernel: [mem 0x22c000000-0x22fbfffff] page 2M
    Sep 29 01:48:24 feynman kernel: init_memory_mapping: [mem 0x200000000-0x22bffffff]
    Sep 29 01:48:24 feynman kernel: [mem 0x200000000-0x22bffffff] page 2M
    Sep 29 01:48:24 feynman kernel: init_memory_mapping: [mem 0x00100000-0xb96e1fff]
    Sep 29 01:48:24 feynman kernel: [mem 0x00100000-0x001fffff] page 4k
    Sep 29 01:48:24 feynman kernel: [mem 0x00200000-0x3fffffff] page 2M
    Sep 29 01:48:24 feynman kernel: [mem 0x40000000-0x7fffffff] page 1G
    Sep 29 01:48:24 feynman kernel: [mem 0x80000000-0xb95fffff] page 2M
    Sep 29 01:48:24 feynman kernel: [mem 0xb9600000-0xb96e1fff] page 4k
    Sep 29 01:48:24 feynman kernel: init_memory_mapping: [mem 0xb96e9000-0xb9ec6fff]
    Sep 29 01:48:24 feynman kernel: [mem 0xb96e9000-0xb97fffff] page 4k
    Sep 29 01:48:24 feynman kernel: [mem 0xb9800000-0xb9dfffff] page 2M
    Sep 29 01:48:24 feynman kernel: [mem 0xb9e00000-0xb9ec6fff] page 4k
    Sep 29 01:48:24 feynman kernel: BRK [0x01b27000, 0x01b27fff] PGTABLE
    Sep 29 01:48:24 feynman kernel: init_memory_mapping: [mem 0xba152000-0xc9586fff]
    Sep 29 01:48:24 feynman kernel: [mem 0xba152000-0xba1fffff] page 4k
    Sep 29 01:48:24 feynman kernel: [mem 0xba200000-0xc93fffff] page 2M
    Sep 29 01:48:24 feynman kernel: [mem 0xc9400000-0xc9586fff] page 4k
    Sep 29 01:48:24 feynman kernel: BRK [0x01b28000, 0x01b28fff] PGTABLE
    Sep 29 01:48:24 feynman kernel: init_memory_mapping: [mem 0xc9a64000-0xc9a97fff]
    Sep 29 01:48:24 feynman kernel: [mem 0xc9a64000-0xc9a97fff] page 4k
    Sep 29 01:48:24 feynman kernel: init_memory_mapping: [mem 0xc9fff000-0xc9ffffff]
    Sep 29 01:48:24 feynman kernel: [mem 0xc9fff000-0xc9ffffff] page 4k
    Sep 29 01:48:24 feynman kernel: init_memory_mapping: [mem 0x100000000-0x1ffffffff]
    Sep 29 01:48:24 feynman kernel: [mem 0x100000000-0x1ffffffff] page 1G
    Sep 29 01:48:24 feynman kernel: RAMDISK: [mem 0x3790c000-0x37c7dfff]
    Sep 29 01:48:24 feynman kernel: ACPI: Early table checksum verification disabled
    Sep 29 01:48:24 feynman kernel: ACPI: RSDP 0x00000000000F0490 000024 (v02 ALASKA)
    Sep 29 01:48:24 feynman kernel: ACPI: XSDT 0x00000000C9B20088 000094 (v01 ALASKA A M I 01072009 AMI 00010013)
    Sep 29 01:48:24 feynman kernel: ACPI: FACP 0x00000000C9B2D340 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
    Sep 29 01:48:24 feynman kernel: ACPI: DSDT 0x00000000C9B201B8 00D182 (v02 ALASKA A M I 00000021 INTL 20091112)
    Sep 29 01:48:24 feynman kernel: ACPI: FACS 0x00000000C9B7C080 000040
    Sep 29 01:48:24 feynman kernel: ACPI: APIC 0x00000000C9B2D450 000092 (v03 ALASKA A M I 01072009 AMI 00010013)
    Sep 29 01:48:24 feynman kernel: ACPI: FPDT 0x00000000C9B2D4E8 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
    Sep 29 01:48:24 feynman kernel: ACPI: ASF! 0x00000000C9B2D530 0000A5 (v32 INTEL HCG 00000001 TFSM 000F4240)
    Sep 29 01:48:24 feynman kernel: ACPI: SSDT 0x00000000C9B2D5D8 000F92 (v01 TrmRef PtidDevc 00001000 INTL 20091112)
    Sep 29 01:48:24 feynman kernel: ACPI: SSDT 0x00000000C9B2E570 000539 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
    Sep 29 01:48:24 feynman kernel: ACPI: SSDT 0x00000000C9B2EAB0 000AD8 (v01 PmRef CpuPm 00003000 INTL 20051117)
    Sep 29 01:48:24 feynman kernel: ACPI: MCFG 0x00000000C9B2F588 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
    Sep 29 01:48:24 feynman kernel: ACPI: HPET 0x00000000C9B2F5C8 000038 (v01 ALASKA A M I 01072009 AMI. 00000005)
    Sep 29 01:48:24 feynman kernel: ACPI: SSDT 0x00000000C9B2F600 000315 (v01 SataRe SataTabl 00001000 INTL 20091112)
    Sep 29 01:48:24 feynman kernel: ACPI: SSDT 0x00000000C9B2F918 001640 (v01 SaSsdt SaSsdt 00003000 INTL 20091112)
    Sep 29 01:48:24 feynman kernel: ACPI: SSDT 0x00000000C9B30F58 000E64 (v01 SgRef SgPeg 00001000 INTL 20091112)
    Sep 29 01:48:24 feynman kernel: ACPI: DMAR 0x00000000C9B31DC0 0000B8 (v01 INTEL HSW 00000001 INTL 00000001)
    Sep 29 01:48:24 feynman kernel: ACPI: SSDT 0x00000000C9B31E78 0015B3 (v01 OptRef OptTabl 00001000 INTL 20091112)
    Sep 29 01:48:24 feynman kernel: ACPI: Local APIC address 0xfee00000
    Sep 29 01:48:24 feynman kernel: No NUMA configuration found
    Sep 29 01:48:24 feynman kernel: Faking a node at [mem 0x0000000000000000-0x000000022fdfffff]
    Sep 29 01:48:24 feynman kernel: Initmem setup node 0 [mem 0x00000000-0x22fdfffff]
    Sep 29 01:48:24 feynman kernel: NODE_DATA [mem 0x22fdf5000-0x22fdf9fff]
    Sep 29 01:48:24 feynman kernel: [ffffea0000000000-ffffea0008bfffff] PMD -> [ffff880227400000-ffff88022f3fffff] on node 0
    Sep 29 01:48:24 feynman kernel: Zone ranges:
    Sep 29 01:48:24 feynman kernel: DMA [mem 0x00001000-0x00ffffff]
    Sep 29 01:48:24 feynman kernel: DMA32 [mem 0x01000000-0xffffffff]
    Sep 29 01:48:24 feynman kernel: Normal [mem 0x100000000-0x22fdfffff]
    Sep 29 01:48:24 feynman kernel: Movable zone start for each node
    Sep 29 01:48:24 feynman kernel: Early memory node ranges
    Sep 29 01:48:24 feynman kernel: node 0: [mem 0x00001000-0x0009cfff]
    Sep 29 01:48:24 feynman kernel: node 0: [mem 0x00100000-0xb96e1fff]
    Sep 29 01:48:24 feynman kernel: node 0: [mem 0xb96e9000-0xb9ec6fff]
    Sep 29 01:48:24 feynman kernel: node 0: [mem 0xba152000-0xc9586fff]
    Sep 29 01:48:24 feynman kernel: node 0: [mem 0xc9a64000-0xc9a97fff]
    Sep 29 01:48:24 feynman kernel: node 0: [mem 0xc9fff000-0xc9ffffff]
    Sep 29 01:48:24 feynman kernel: node 0: [mem 0x100000000-0x22fdfffff]
    Sep 29 01:48:24 feynman kernel: On node 0 totalpages: 2068678
    Sep 29 01:48:24 feynman kernel: DMA zone: 64 pages used for memmap
    Sep 29 01:48:24 feynman kernel: DMA zone: 21 pages reserved
    Sep 29 01:48:24 feynman kernel: DMA zone: 3996 pages, LIFO batch:0
    Sep 29 01:48:24 feynman kernel: DMA32 zone: 12813 pages used for memmap
    Sep 29 01:48:24 feynman kernel: DMA32 zone: 820010 pages, LIFO batch:31
    Sep 29 01:48:24 feynman kernel: Normal zone: 19448 pages used for memmap
    Sep 29 01:48:24 feynman kernel: Normal zone: 1244672 pages, LIFO batch:31
    Sep 29 01:48:24 feynman kernel: Reserving Intel graphics stolen memory at 0xcd200000-0xcf1fffff
    Sep 29 01:48:24 feynman kernel: ACPI: PM-Timer IO Port: 0x1808
    Sep 29 01:48:24 feynman kernel: ACPI: Local APIC address 0xfee00000
    Sep 29 01:48:24 feynman kernel: ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    Sep 29 01:48:24 feynman kernel: ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
    Sep 29 01:48:24 feynman kernel: ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
    Sep 29 01:48:24 feynman kernel: ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
    Sep 29 01:48:24 feynman kernel: ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
    Sep 29 01:48:24 feynman kernel: ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
    Sep 29 01:48:24 feynman kernel: ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
    Sep 29 01:48:24 feynman kernel: ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
    Sep 29 01:48:24 feynman kernel: ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
    Sep 29 01:48:24 feynman kernel: ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    Sep 29 01:48:24 feynman kernel: IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
    Sep 29 01:48:24 feynman kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    Sep 29 01:48:24 feynman kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    Sep 29 01:48:24 feynman kernel: ACPI: IRQ0 used by override.
    Sep 29 01:48:24 feynman kernel: ACPI: IRQ2 used by override.
    Sep 29 01:48:24 feynman kernel: ACPI: IRQ9 used by override.
    Sep 29 01:48:24 feynman kernel: Using ACPI (MADT) for SMP configuration information
    Sep 29 01:48:24 feynman kernel: ACPI: HPET id: 0x8086a701 base: 0xfed00000
    Sep 29 01:48:24 feynman kernel: smpboot: Allowing 8 CPUs, 0 hotplug CPUs
    Sep 29 01:48:24 feynman kernel: nr_irqs_gsi: 40
    Sep 29 01:48:24 feynman kernel: PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
    Sep 29 01:48:24 feynman kernel: PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
    Sep 29 01:48:24 feynman kernel: PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
    Sep 29 01:48:24 feynman kernel: PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
    Sep 29 01:48:24 feynman kernel: PM: Registered nosave memory: [mem 0xb96e2000-0xb96e8fff]
    Sep 29 01:48:24 feynman kernel: PM: Registered nosave memory: [mem 0xb9ec7000-0xba151fff]
    Sep 29 01:48:24 feynman kernel: PM: Registered nosave memory: [mem 0xc9587000-0xc9a63fff]
    Sep 29 01:48:24 feynman kernel: PM: Registered nosave memory: [mem 0xc9a98000-0xc9b7dfff]
    Sep 29 01:48:24 feynman kernel: PM: Registered nosave memory: [mem 0xc9b7e000-0xc9ffefff]
    Sep 29 01:48:24 feynman kernel: PM: Registered nosave memory: [mem 0xca000000-0xccffffff]
    Sep 29 01:48:24 feynman kernel: PM: Registered nosave memory: [mem 0xcd000000-0xcf1fffff]
    Sep 29 01:48:24 feynman kernel: PM: Registered nosave memory: [mem 0xcf200000-0xf7ffffff]
    Sep 29 01:48:24 feynman kernel: PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
    Sep 29 01:48:24 feynman kernel: PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
    Sep 29 01:48:24 feynman kernel: PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
    Sep 29 01:48:24 feynman kernel: PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
    Sep 29 01:48:24 feynman kernel: PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
    Sep 29 01:48:24 feynman kernel: PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
    Sep 29 01:48:24 feynman kernel: PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
    Sep 29 01:48:24 feynman kernel: PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
    Sep 29 01:48:24 feynman kernel: PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
    Sep 29 01:48:24 feynman kernel: PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
    Sep 29 01:48:24 feynman kernel: PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
    Sep 29 01:48:24 feynman kernel: e820: [mem 0xcf200000-0xf7ffffff] available for PCI devices
    Sep 29 01:48:24 feynman kernel: Booting paravirtualized kernel on bare hardware
    Sep 29 01:48:24 feynman kernel: setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1
    Sep 29 01:48:24 feynman kernel: PERCPU: Embedded 29 pages/cpu @ffff88022fa00000 s86784 r8192 d23808 u262144
    Sep 29 01:48:24 feynman kernel: pcpu-alloc: s86784 r8192 d23808 u262144 alloc=1*2097152
    Sep 29 01:48:24 feynman kernel: pcpu-alloc: [0] 0 1 2 3 4 5 6 7
    Sep 29 01:48:24 feynman kernel: Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2036332
    Sep 29 01:48:24 feynman kernel: Policy zone: Normal
    Sep 29 01:48:24 feynman kernel: Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=a4d99c8f-d440-46c2-aa60-bf3e5c4ef4c5 rw quiet
    Sep 29 01:48:24 feynman kernel: PID hash table entries: 4096 (order: 3, 32768 bytes)
    Sep 29 01:48:24 feynman kernel: xsave: enabled xstate_bv 0x7, cntxt size 0x340
    Sep 29 01:48:24 feynman kernel: AGP: Checking aperture...
    Sep 29 01:48:24 feynman kernel: AGP: No AGP bridge found
    Sep 29 01:48:24 feynman kernel: Calgary: detecting Calgary via BIOS EBDA area
    Sep 29 01:48:24 feynman kernel: Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    Sep 29 01:48:24 feynman kernel: Memory: 8061324K/8274712K available (5335K kernel code, 887K rwdata, 1688K rodata, 1128K init, 1164K bss, 213388K reserved)
    Sep 29 01:48:24 feynman kernel: SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
    Sep 29 01:48:24 feynman kernel: Preemptible hierarchical RCU implementation.
    Sep 29 01:48:24 feynman kernel: RCU dyntick-idle grace-period acceleration is enabled.
    Sep 29 01:48:24 feynman kernel: Dump stacks of tasks blocking RCU-preempt GP.
    Sep 29 01:48:24 feynman kernel: RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=8.
    Sep 29 01:48:24 feynman kernel: RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
    Sep 29 01:48:24 feynman kernel: NR_IRQS:8448 nr_irqs:744 16
    Sep 29 01:48:24 feynman kernel: Console: colour dummy device 80x25
    Sep 29 01:48:24 feynman kernel: console [tty0] enabled
    Sep 29 01:48:24 feynman kernel: allocated 33554432 bytes of page_cgroup
    Sep 29 01:48:24 feynman kernel: please try 'cgroup_disable=memory' option if you don't want memory cgroups
    Sep 29 01:48:24 feynman kernel: hpet clockevent registered
    Sep 29 01:48:24 feynman kernel: tsc: Fast TSC calibration using PIT
    Sep 29 01:48:24 feynman kernel: tsc: Detected 2694.062 MHz processor
    Sep 29 01:48:24 feynman kernel: Calibrating delay loop (skipped), value calculated using timer frequency.. 5390.62 BogoMIPS (lpj=8980206)
    Sep 29 01:48:24 feynman kernel: pid_max: default: 32768 minimum: 301
    Sep 29 01:48:24 feynman kernel: ACPI: Core revision 20140424
    Sep 29 01:48:24 feynman kernel: ACPI: All ACPI Tables successfully acquired
    Sep 29 01:48:24 feynman kernel: Security Framework initialized
    Sep 29 01:48:24 feynman kernel: Yama: becoming mindful.
    Sep 29 01:48:24 feynman kernel: Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
    Sep 29 01:48:24 feynman kernel: Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
    Sep 29 01:48:24 feynman kernel: Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
    Sep 29 01:48:24 feynman kernel: Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
    Sep 29 01:48:24 feynman kernel: Initializing cgroup subsys memory
    Sep 29 01:48:24 feynman kernel: Initializing cgroup subsys devices
    Sep 29 01:48:24 feynman kernel: Initializing cgroup subsys freezer
    Sep 29 01:48:24 feynman kernel: Initializing cgroup subsys net_cls
    Sep 29 01:48:24 feynman kernel: Initializing cgroup subsys blkio
    Sep 29 01:48:24 feynman kernel: CPU: Physical Processor ID: 0
    Sep 29 01:48:24 feynman kernel: CPU: Processor Core ID: 0
    Sep 29 01:48:24 feynman kernel: ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
    ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
    Sep 29 01:48:24 feynman kernel: mce: CPU supports 9 MCE banks
    Sep 29 01:48:24 feynman kernel: CPU0: Thermal monitoring enabled (TM1)
    Sep 29 01:48:24 feynman kernel: Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
    Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
    tlb_flushall_shift: 6
    Sep 29 01:48:24 feynman kernel: Freeing SMP alternatives memory: 20K (ffffffff819f9000 - ffffffff819fe000)
    Sep 29 01:48:24 feynman kernel: ftrace: allocating 20438 entries in 80 pages
    Sep 29 01:48:24 feynman kernel: dmar: Host address width 39
    Sep 29 01:48:24 feynman kernel: dmar: DRHD base: 0x000000fed90000 flags: 0x0
    Sep 29 01:48:24 feynman kernel: dmar: IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c0000020660462 ecap f0101a
    Sep 29 01:48:24 feynman kernel: dmar: DRHD base: 0x000000fed91000 flags: 0x1
    Sep 29 01:48:24 feynman kernel: dmar: IOMMU 1: reg_base_addr fed91000 ver 1:0 cap d2008020660462 ecap f010da
    Sep 29 01:48:24 feynman kernel: dmar: RMRR base: 0x000000c97a6000 end: 0x000000c97b2fff
    Sep 29 01:48:24 feynman kernel: dmar: RMRR base: 0x000000cd000000 end: 0x000000cf1fffff
    Sep 29 01:48:24 feynman kernel: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
    Sep 29 01:48:24 feynman kernel: HPET id 0 under DRHD base 0xfed91000
    Sep 29 01:48:24 feynman kernel: Queued invalidation will be enabled to support x2apic and Intr-remapping.
    Sep 29 01:48:24 feynman kernel: Enabled IRQ remapping in x2apic mode
    Sep 29 01:48:24 feynman kernel: Enabling x2apic
    Sep 29 01:48:24 feynman kernel: Enabled x2apic
    Sep 29 01:48:24 feynman kernel: Switched APIC routing to cluster x2apic.
    Sep 29 01:48:24 feynman kernel: ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    Sep 29 01:48:24 feynman kernel: smpboot: CPU0: Intel(R) Core(TM) i7-4800MQ CPU @ 2.70GHz (fam: 06, model: 3c, stepping: 03)
    Sep 29 01:48:24 feynman kernel: TSC deadline timer enabled
    Sep 29 01:48:24 feynman kernel: Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
    Sep 29 01:48:24 feynman kernel: ... version: 3
    Sep 29 01:48:24 feynman kernel: ... bit width: 48
    Sep 29 01:48:24 feynman kernel: ... generic registers: 4
    Sep 29 01:48:24 feynman kernel: ... value mask: 0000ffffffffffff
    Sep 29 01:48:24 feynman kernel: ... max period: 0000ffffffffffff
    Sep 29 01:48:24 feynman kernel: ... fixed-purpose events: 3
    Sep 29 01:48:24 feynman kernel: ... event mask: 000000070000000f
    Sep 29 01:48:24 feynman kernel: x86: Booting SMP configuration:
    Sep 29 01:48:24 feynman kernel: .... node #0, CPUs: #1
    Sep 29 01:48:24 feynman kernel: NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
    Sep 29 01:48:24 feynman kernel: #2 #3 #4 #5 #6 #7
    Sep 29 01:48:24 feynman kernel: x86: Booted up 1 node, 8 CPUs
    Sep 29 01:48:24 feynman kernel: smpboot: Total of 8 processors activated (43122.03 BogoMIPS)
    Sep 29 01:48:24 feynman kernel: devtmpfs: initialized
    Sep 29 01:48:24 feynman kernel: PM: Registering ACPI NVS region [mem 0xb96e2000-0xb96e8fff] (28672 bytes)
    Sep 29 01:48:24 feynman kernel: PM: Registering ACPI NVS region [mem 0xc9a98000-0xc9b7dfff] (942080 bytes)
    Sep 29 01:48:24 feynman kernel: pinctrl core: initialized pinctrl subsystem
    Sep 29 01:48:24 feynman kernel: RTC time: 0:48:18, date: 09/29/14
    Sep 29 01:48:24 feynman kernel: NET: Registered protocol family 16
    Sep 29 01:48:24 feynman kernel: cpuidle: using governor ladder
    Sep 29 01:48:24 feynman kernel: cpuidle: using governor menu
    Sep 29 01:48:24 feynman kernel: ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
    Sep 29 01:48:24 feynman kernel: ACPI: bus type PCI registered
    Sep 29 01:48:24 feynman kernel: acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
    Sep 29 01:48:24 feynman kernel: PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
    Sep 29 01:48:24 feynman kernel: PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
    Sep 29 01:48:24 feynman kernel: PCI: Using configuration type 1 for base access
    Sep 29 01:48:24 feynman kernel: ACPI: Added _OSI(Module Device)
    Sep 29 01:48:24 feynman kernel: ACPI: Added _OSI(Processor Device)
    Sep 29 01:48:24 feynman kernel: ACPI: Added _OSI(3.0 _SCP Extensions)
    Sep 29 01:48:24 feynman kernel: ACPI: Added _OSI(Processor Aggregator Device)
    Sep 29 01:48:24 feynman kernel: ACPI: Executed 1 blocks of module-level executable AML code
    Sep 29 01:48:24 feynman kernel: [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
    Sep 29 01:48:24 feynman kernel: ACPI: Dynamic OEM Table Load:
    Sep 29 01:48:24 feynman kernel: ACPI: SSDT 0xFFFF88022380B000 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
    Sep 29 01:48:24 feynman kernel: ACPI: Dynamic OEM Table Load:
    Sep 29 01:48:24 feynman kernel: ACPI: SSDT 0xFFFF880223889000 0005AA (v01 PmRef ApIst 00003000 INTL 20051117)
    Sep 29 01:48:24 feynman kernel: ACPI: Dynamic OEM Table Load:
    Sep 29 01:48:24 feynman kernel: ACPI: SSDT 0xFFFF880223869600 000119 (v01 PmRef ApCst 00003000 INTL 20051117)
    Sep 29 01:48:24 feynman kernel: ACPI: Interpreter enabled
    Sep 29 01:48:24 feynman kernel: ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140424/hwxface-580)
    Sep 29 01:48:24 feynman kernel: ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
    Sep 29 01:48:24 feynman kernel: ACPI: (supports S0 S3 S4 S5)
    Sep 29 01:48:24 feynman kernel: ACPI: Using IOAPIC for interrupt routing
    Sep 29 01:48:24 feynman kernel: PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    Sep 29 01:48:24 feynman kernel: ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
    Sep 29 01:48:24 feynman kernel: acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
    Sep 29 01:48:24 feynman kernel: acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME]
    Sep 29 01:48:24 feynman kernel: acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
    Sep 29 01:48:24 feynman kernel: PCI host bridge to bus 0000:00
    Sep 29 01:48:24 feynman kernel: pci_bus 0000:00: root bus resource [bus 00-3e]
    Sep 29 01:48:24 feynman kernel: pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
    Sep 29 01:48:24 feynman kernel: pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
    Sep 29 01:48:24 feynman kernel: pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
    Sep 29 01:48:24 feynman kernel: pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
    Sep 29 01:48:24 feynman kernel: pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
    Sep 29 01:48:24 feynman kernel: pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
    Sep 29 01:48:24 feynman kernel: pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
    Sep 29 01:48:24 feynman kernel: pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
    Sep 29 01:48:24 feynman kernel: pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
    Sep 29 01:48:24 feynman kernel: pci_bus 0000:00: root bus resource [mem 0xcf200000-0xfeafffff]
    Sep 29 01:48:24 feynman kernel: pci 0000:00:00.0: [8086:0c04] type 00 class 0x060000
    Sep 29 01:48:24 feynman kernel: pci 0000:00:01.0: [8086:0c01] type 01 class 0x060400
    Sep 29 01:48:24 feynman kernel: pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
    Sep 29 01:48:24 feynman kernel: pci 0000:00:01.0: System wakeup disabled by ACPI
    Sep 29 01:48:24 feynman kernel: pci 0000:00:02.0: [8086:0416] type 00 class 0x030000
    Sep 29 01:48:24 feynman kernel: pci 0000:00:02.0: reg 0x10: [mem 0xf7400000-0xf77fffff 64bit]
    Sep 29 01:48:24 feynman kernel: pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
    Sep 29 01:48:24 feynman kernel: pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
    Sep 29 01:48:24 feynman kernel: pci 0000:00:03.0: [8086:0c0c] type 00 class 0x040300
    Sep 29 01:48:24 feynman kernel: pci 0000:00:03.0: reg 0x10: [mem 0xf7a14000-0xf7a17fff 64bit]
    Sep 29 01:48:24 feynman kernel: pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330
    Sep 29 01:48:24 feynman kernel: pci 0000:00:14.0: reg 0x10: [mem 0xf7a00000-0xf7a0ffff 64bit]
    Sep 29 01:48:24 feynman kernel: pci 0000:00:14.0: PME# supported from D3hot D3cold
    Sep 29 01:48:24 feynman kernel: pci 0000:00:14.0: System wakeup disabled by ACPI
    Sep 29 01:48:24 feynman kernel: pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000
    Sep 29 01:48:24 feynman kernel: pci 0000:00:16.0: reg 0x10: [mem 0xf7a1f000-0xf7a1f00f 64bit]
    Sep 29 01:48:24 feynman kernel: pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
    Sep 29 01:48:24 feynman kernel: pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320
    Sep 29 01:48:24 feynman kernel: pci 0000:00:1a.0: reg 0x10: [mem 0xf7a1c000-0xf7a1c3ff]
    Sep 29 01:48:24 feynman kernel: pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
    Sep 29 01:48:24 feynman kernel: pci 0000:00:1a.0: System wakeup disabled by ACPI
    Sep 29 01:48:24 feynman kernel: pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300
    Sep 29 01:48:24 feynman kernel: pci 0000:00:1b.0: reg 0x10: [mem 0xf7a10000-0xf7a13fff 64bit]
    Sep 29 01:48:24 feynman kernel: pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    Sep 29 01:48:24 feynman kernel: pci 0000:00:1b.0: System wakeup disabled by ACPI
    Sep 29 01:48:24 feynman kernel: pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400
    Sep 29 01:48:24 feynman kernel: pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    Sep 29 01:48:24 feynman kernel: pci 0000:00:1c.0: System wakeup disabled by ACPI
    Sep 29 01:48:24 feynman kernel: pci 0000:00:1c.2: [8086:8c14] type 01 class 0x060400
    Sep 29 01:48:24 feynman kernel: pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
    Sep 29 01:48:24 feynman kernel: pci 0000:00:1c.2: System wakeup disabled by ACPI
    Sep 29 01:48:24 feynman kernel: pci 0000:00:1c.3: [8086:8c16] type 01 class 0x060400
    Sep 29 01:48:24 feynman kernel: pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
    Sep 29 01:48:24 feynman kernel: pci 0000:00:1c.3: System wakeup disabled by ACPI
    Sep 29 01:48:24 feynman kernel: pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320
    Sep 29 01:48:24 feynman kernel: pci 0000:00:1d.0: reg 0x10: [mem 0xf7a1b000-0xf7a1b3ff]
    Sep 29 01:48:24 feynman kernel: pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
    Sep 29 01:48:24 feynman kernel: pci 0000:00:1d.0: System wakeup disabled by ACPI
    Sep 29 01:48:24 feynman kernel: pci 0000:00:1f.0: [8086:8c4b] type 00 class 0x060100
    Sep 29 01:48:24 feynman kernel: pci 0000:00:1f.2: [8086:8c03] type 00 class 0x010601
    Sep 29 01:48:24 feynman kernel: pci 0000:00:1f.2: reg 0x10: [io 0xf0b0-0xf0b7]
    Sep 29 01:48:24 feynman kernel: pci 0000:00:1f.2: reg 0x14: [io 0xf0a0-0xf0a3]
    Sep 29 01:48:24 feynman kernel: pci 0000:00:1f.2: reg 0x18: [io 0xf090-0xf097]
    Sep 29 01:48:24 feynman kernel: pci 0000:00:1f.2: reg 0x1c: [io 0xf080-0xf083]
    Sep 29 01:48:24 feynman kernel: pci 0000:00:1f.2: reg 0x20: [io 0xf

    Hi berbae,
    berbae wrote:That's not what your logs say:
    Can you explain exactly how you start your computer and when you log in as user?
    I may have grabbed that info after restarting the kdm service manually.
    The issue happens on a normal bootup, just by pressing the power button and waiting. :-) To reiterate: a pitch black screen as if the LCD is turned off. The login prompt is there waiting in the dark, if I blindly input my password it starts KDE (I hear the disk and see the processes with
    ps -ef
    The following is the state of my system after pressing ctrl-alt-f1, logging in as root and mounting a pen.
    dmesg and Xorg.0.log look particularly nasty:
    dmesg:
    [ 10.422380] enhanceio: Allocate 20398KB (8B per) mem for 2610944-entry cache (capacity:10238MB, associativity:256, block size:4096 bytes)
    [ 10.422380] sound hdaudioC0D0: autoconfig: line_outs=1 (0x24/0x0/0x0/0x0/0x0) type:speaker
    [ 10.422384] sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
    [ 10.422385] sound hdaudioC0D0: hp_outs=1 (0x25/0x0/0x0/0x0/0x0)
    [ 10.422386] sound hdaudioC0D0: mono: mono_out=0x0
    [ 10.422387] sound hdaudioC0D0: dig-out=0x2d/0x0
    [ 10.422388] sound hdaudioC0D0: inputs:
    [ 10.422390] sound hdaudioC0D0: Mic=0x2b
    [ 10.422391] sound hdaudioC0D0: Internal Mic=0x29
    [ 10.430634] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card1/input18
    [ 10.430719] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card1/input19
    [ 10.430791] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card1/input20
    [ 10.430997] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
    [ 10.431638] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
    [ 10.617688] enhanceio: Cache metadata loaded from disk with 438613 valid 0 dirty blocks
    [ 10.617691] enhanceio: Setting mode to write through
    [ 10.617890] enhanceio_lru: Initialized 10199 sets in LRU
    [ 10.618160] enhanceio: Cache metadata loaded from disk with 438613 valid 0 dirty blocks
    [ 10.618162] enhanceio: Setting mode to write through
    [ 10.618355] enhanceio_lru: Initialized 10199 sets in LRU
    [ 10.656047] ------------[ cut here ]------------
    [ 10.656053] WARNING: CPU: 3 PID: 352 at fs/proc/generic.c:315 proc_register+0xc0/0x140()
    [ 10.656054] proc_dir_entry 'enhanceio/usr_cache' already registered
    [ 10.656055] Modules linked in: snd_hda_codec_hdmi snd_hda_codec_via snd_hda_codec_generic enhanceio_rand(O) enhanceio_lru(O) enhanceio_fifo(O) enhanceio(O) coretemp hwmon intel_rapl x86_pkg_temp_thermal intel_powerclamp kvm_intel kvm crct10dif_pclmul crc32_pclmul crc32c_intel arc4 iwldvm ghash_clmulni_intel snd_hda_intel snd_hda_controller aesni_intel joydev mousedev i915 led_class mac80211 aes_x86_64 snd_hda_codec lrw ecb gf128mul btusb i2c_i801 iwlwifi glue_helper iTCO_wdt snd_hwdep drm_kms_helper bluetooth drm iTCO_vendor_support snd_pcm cfg80211 6lowpan_iphc intel_gtt mei_me i2c_algo_bit ablk_helper i2c_core rfkill cryptd r8169 snd_timer rtsx_pci_ms memstick evdev mii mxm_wmi snd mei mac_hid soundcore shpchp lpc_ich microcode psmouse serio_raw tpm_infineon tpm_tis tpm video thermal processor
    [ 10.656084] pcspkr battery button ac wmi usbip_host(C) usbip_core(C) ext4 crc16 mbcache jbd2 sd_mod sr_mod cdrom crc_t10dif crct10dif_common rtsx_pci_sdmmc atkbd libps2 mmc_core ehci_pci xhci_hcd ehci_hcd ahci libahci libata usbcore scsi_mod rtsx_pci usb_common i8042 serio
    [ 10.656096] CPU: 3 PID: 352 Comm: eio_cli Tainted: G C O 3.16.3-1-ARCH #1
    [ 10.656097] Hardware name: Notebook W350STQ/W370ST /W350STQ/W370ST , BIOS 4.6.5 06/14/2013
    [ 10.656098] 0000000000000000 00000000319638dd ffff88021eda7bf0 ffffffff8152b3bc
    [ 10.656100] ffff88021eda7c38 ffff88021eda7c28 ffffffff8106e45d ffff880222f323c0
    [ 10.656101] ffff88021f552df3 ffff88021f552d80 ffff880222e94f00 ffff880222f323c0
    [ 10.656102] Call Trace:
    [ 10.656106] [<ffffffff8152b3bc>] dump_stack+0x4d/0x6f
    [ 10.656109] [<ffffffff8106e45d>] warn_slowpath_common+0x7d/0xa0
    [ 10.656110] [<ffffffff8106e4dc>] warn_slowpath_fmt+0x5c/0x80
    [ 10.656112] [<ffffffff8122c1e4>] ? proc_alloc_inum+0x54/0xe0
    [ 10.656114] [<ffffffff8122c330>] proc_register+0xc0/0x140
    [ 10.656115] [<ffffffff8122c4b2>] proc_mkdir_data+0x52/0x80
    [ 10.656117] [<ffffffff8122c515>] proc_mkdir+0x15/0x20
    [ 10.656120] [<ffffffffa07ae25e>] eio_procfs_ctr+0x2e/0x220 [enhanceio]
    [ 10.656122] [<ffffffffa07a4cb0>] eio_cache_create+0x1270/0x1990 [enhanceio]
    [ 10.656125] [<ffffffff8118a1ae>] ? map_vm_area+0x2e/0x40
    [ 10.656126] [<ffffffff8118b4a0>] ? __vmalloc_node_range+0x200/0x290
    [ 10.656128] [<ffffffffa07a57c6>] ? eio_ioctl+0x2b6/0x310 [enhanceio]
    [ 10.656130] [<ffffffffa07a57ef>] eio_ioctl+0x2df/0x310 [enhanceio]
    [ 10.656133] [<ffffffff811d4af0>] do_vfs_ioctl+0x2d0/0x4b0
    [ 10.656135] [<ffffffff811d4d51>] SyS_ioctl+0x81/0xa0
    [ 10.656137] [<ffffffff81531129>] system_call_fastpath+0x16/0x1b
    [ 10.656138] ---[ end trace ba917aef9e72708f ]---
    [ 10.656143] sysctl duplicate entry: /dev/enhanceio/usr_cache//zero_stats
    [ 10.656172] CPU: 3 PID: 352 Comm: eio_cli Tainted: G WC O 3.16.3-1-ARCH #1
    [ 10.656172] Hardware name: Notebook W350STQ/W370ST /W350STQ/W370ST , BIOS 4.6.5 06/14/2013
    [ 10.656173] 0000000000000000 00000000319638dd ffff88021eda7c30 ffffffff8152b3bc
    [ 10.656174] 0000000000000000 ffff88021eda7c98 ffffffff81232da5 0000000000000000
    [ 10.656175] ffff88021eda7c70 ffff88021f552900 ffff88022309e300 0000000000000000
    [ 10.656177] Call Trace:
    [ 10.656178] [<ffffffff8152b3bc>] dump_stack+0x4d/0x6f
    [ 10.656180] [<ffffffff81232da5>] __register_sysctl_table+0x405/0x660
    [ 10.656181] [<ffffffff812333ed>] __register_sysctl_paths+0x1dd/0x200
    [ 10.656184] [<ffffffff811a5fba>] ? __kmalloc+0x18a/0x1c0
    [ 10.656186] [<ffffffff8123344f>] register_sysctl_table+0x1f/0x30
    [ 10.656188] [<ffffffffa07ae3bf>] eio_procfs_ctr+0x18f/0x220 [enhanceio]
    [ 10.656189] [<ffffffffa07a4cb0>] eio_cache_create+0x1270/0x1990 [enhanceio]
    [ 10.656190] [<ffffffff8118a1ae>] ? map_vm_area+0x2e/0x40
    [ 10.656192] [<ffffffff8118b4a0>] ? __vmalloc_node_range+0x200/0x290
    [ 10.656193] [<ffffffffa07a57c6>] ? eio_ioctl+0x2b6/0x310 [enhanceio]
    [ 10.656195] [<ffffffffa07a57ef>] eio_ioctl+0x2df/0x310 [enhanceio]
    [ 10.656197] [<ffffffff811d4af0>] do_vfs_ioctl+0x2d0/0x4b0
    [ 10.656198] [<ffffffff811d4d51>] SyS_ioctl+0x81/0xa0
    [ 10.656200] [<ffffffff81531129>] system_call_fastpath+0x16/0x1b
    [ 10.656201] Failed to register common sysctl
    [ 10.659094] cache_create: Device is already cached.
    [ 11.478308] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S
    [ 11.485810] iwlwifi 0000:03:00.0: Radio type=0x0-0x0-0x0
    [ 11.518234] nvidia: module license 'NVIDIA' taints kernel.
    [ 11.518238] Disabling lock debugging due to kernel taint
    [ 11.525193] [drm] Initialized nvidia-drm 0.0.0 20130102 for 0000:01:00.0 on minor 1
    [ 11.525197] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 340.32 Tue Aug 5 20:58:26 PDT 2014
    [ 11.526152] vgaarb: this pci device is not a vga device
    [ 11.526429] nvidia 0000:01:00.0: irq 52 for MSI/MSI-X
    [ 11.528294] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140424/nsarguments-95)
    [ 11.528340] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140424/nsarguments-95)
    [ 11.528369] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140424/nsarguments-95)
    [ 11.528403] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140424/nsarguments-95)
    [ 11.528431] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140424/nsarguments-95)
    [ 11.528459] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140424/nsarguments-95)
    [ 11.528490] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140424/nsarguments-95)
    [ 11.528525] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140424/nsarguments-95)
    [ 11.550137] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S
    [ 11.557694] iwlwifi 0000:03:00.0: Radio type=0x0-0x0-0x0
    [ 11.625420] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
    [ 11.628649] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140424/nsarguments-95)
    [ 12.148668] cfg80211: Calling CRDA to update world regulatory domain
    [ 12.183699] wlp3s0: authenticate with c4:04:15:e5:ba:60
    [ 12.202127] wlp3s0: send auth to c4:04:15:e5:ba:60 (try 1/3)
    [ 12.204424] wlp3s0: authenticated
    [ 12.205180] wlp3s0: associate with c4:04:15:e5:ba:60 (try 1/3)
    [ 12.210701] wlp3s0: RX AssocResp from c4:04:15:e5:ba:60 (capab=0x11 status=0 aid=2)
    [ 12.213604] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
    [ 12.213637] wlp3s0: associated
    [ 12.213651] cfg80211: Calling CRDA to update world regulatory domain
    [ 13.284862] vgaarb: this pci device is not a vga device
    [ 187.535119] usb 3-2: new high-speed USB device number 3 using xhci_hcd
    [ 187.860846] usb 3-2: ep 0x81 - rounding interval to 128 microframes, ep desc says 255 microframes
    [ 187.860858] usb 3-2: ep 0x2 - rounding interval to 128 microframes, ep desc says 255 microframes
    [ 188.275010] usb-storage 3-2:1.0: USB Mass Storage device detected
    [ 188.275105] scsi6 : usb-storage 3-2:1.0
    [ 188.275160] usbcore: registered new interface driver usb-storage
    [ 188.276007] usbcore: registered new interface driver uas
    [ 189.278473] scsi 6:0:0:0: Direct-Access Kingston DataTraveler 112 1.00 PQ: 0 ANSI: 2
    [ 189.278903] sd 6:0:0:0: [sdc] 7557704 512-byte logical blocks: (3.86 GB/3.60 GiB)
    [ 189.279055] sd 6:0:0:0: [sdc] Write Protect is off
    [ 189.279058] sd 6:0:0:0: [sdc] Mode Sense: 03 00 00 00
    [ 189.279200] sd 6:0:0:0: [sdc] No Caching mode page found
    [ 189.280334] sd 6:0:0:0: [sdc] Assuming drive cache: write through
    [ 189.283005] sdc: sdc1
    [ 189.283774] sd 6:0:0:0: [sdc] Attached SCSI removable disk
    Xorg.0.log
    [ 11.389]
    X.Org X Server 1.16.1
    Release Date: 2014-09-21
    [ 11.389] X Protocol Version 11, Revision 0
    [ 11.389] Build Operating System: Linux 3.16.1-1-ARCH x86_64
    [ 11.389] Current Operating System: Linux feynman 3.16.3-1-ARCH #1 SMP PREEMPT Wed Sep 17 21:54:13 CEST 2014 x86_64
    [ 11.389] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=a4d99c8f-d440-46c2-aa60-bf3e5c4ef4c5 rw quiet
    [ 11.389] Build Date: 21 September 2014 10:53:13AM
    [ 11.389]
    [ 11.389] Current version of pixman: 0.32.6
    [ 11.389] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 11.389] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 11.389] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Sep 29 22:49:40 2014
    [ 11.402] (==) Using config file: "/etc/X11/xorg.conf"
    [ 11.402] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
    [ 11.411] (==) ServerLayout "layout"
    [ 11.411] (**) |-->Screen "nvidia" (0)
    [ 11.411] (**) | |-->Monitor "<default monitor>"
    [ 11.411] (**) | |-->Device "nvidia"
    [ 11.411] (==) No monitor specified for screen "nvidia".
    Using a default monitor configuration.
    [ 11.411] (**) |-->Inactive Device "intel"
    [ 11.411] (==) Automatically adding devices
    [ 11.411] (==) Automatically enabling devices
    [ 11.411] (==) Automatically adding GPU devices
    [ 11.414] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
    [ 11.414] Entry deleted from font path.
    [ 11.414] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
    [ 11.414] Entry deleted from font path.
    [ 11.414] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
    [ 11.414] Entry deleted from font path.
    [ 11.414] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
    [ 11.414] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
    [ 11.414] Entry deleted from font path.
    [ 11.414] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
    [ 11.414] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/
    [ 11.414] (==) ModulePath set to "/usr/lib/xorg/modules"
    [ 11.414] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
    [ 11.414] (II) Loader magic: 0x818d80
    [ 11.414] (II) Module ABI versions:
    [ 11.414] X.Org ANSI C Emulation: 0.4
    [ 11.414] X.Org Video Driver: 18.0
    [ 11.414] X.Org XInput driver : 21.0
    [ 11.414] X.Org Server Extension : 8.0
    [ 11.414] (EE) systemd-logind: failed to get session: PID 410 does not belong to any known session
    [ 11.415] (II) xfree86: Adding drm device (/dev/dri/card0)
    [ 11.415] (--) PCI:*(0:0:2:0) 8086:0416:1558:3537 rev 6, Mem @ 0xf7400000/4194304, 0xd0000000/268435456, I/O @ 0x0000f000/64
    [ 11.415] (--) PCI: (0:1:0:0) 10de:11e2:1558:3537 rev 161, Mem @ 0xf6000000/16777216, 0xe0000000/268435456, 0xf0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
    [ 11.415] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    [ 11.416] (II) LoadModule: "glx"
    [ 11.417] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 11.425] (II) Module glx: vendor="X.Org Foundation"
    [ 11.425] compiled for 1.16.1, module version = 1.0.0
    [ 11.425] ABI class: X.Org Server Extension, version 8.0
    [ 11.425] (==) AIGLX enabled
    [ 11.425] (II) LoadModule: "nvidia"
    [ 11.425] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
    [ 11.432] (II) Module nvidia: vendor="NVIDIA Corporation"
    [ 11.432] compiled for 4.0.2, module version = 1.0.0
    [ 11.432] Module class: X.Org Video Driver
    [ 11.433] (II) LoadModule: "modesetting"
    [ 11.433] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
    [ 11.433] (II) Module modesetting: vendor="X.Org Foundation"
    [ 11.433] compiled for 1.16.0, module version = 0.9.0
    [ 11.433] Module class: X.Org Video Driver
    [ 11.433] ABI class: X.Org Video Driver, version 18.0
    [ 11.433] (II) NVIDIA dlloader X Driver 340.32 Tue Aug 5 20:13:04 PDT 2014
    [ 11.433] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
    [ 11.434] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
    [ 11.434] (++) using VT number 7
    [ 11.438] (II) Loading sub module "fb"
    [ 11.438] (II) LoadModule: "fb"
    [ 11.439] (II) Loading /usr/lib/xorg/modules/libfb.so
    [ 11.440] (II) Module fb: vendor="X.Org Foundation"
    [ 11.440] compiled for 1.16.1, module version = 1.0.0
    [ 11.440] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 11.440] (WW) Unresolved symbol: fbGetGCPrivateKey
    [ 11.440] (II) Loading sub module "wfb"
    [ 11.440] (II) LoadModule: "wfb"
    [ 11.440] (II) Loading /usr/lib/xorg/modules/libwfb.so
    [ 11.441] (II) Module wfb: vendor="X.Org Foundation"
    [ 11.441] compiled for 1.16.1, module version = 1.0.0
    [ 11.441] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 11.441] (II) Loading sub module "ramdac"
    [ 11.441] (II) LoadModule: "ramdac"
    [ 11.441] (II) Module "ramdac" already built-in
    [ 11.514] (II) modesetting(1): using drv /dev/dri/card0
    [ 11.514] (II) modesetting(G0): using drv /dev/dri/card0
    [ 11.514] (EE) Screen 1 deleted because of no matching config section.
    [ 11.514] (II) UnloadModule: "modesetting"
    [ 11.514] (II) NVIDIA(0): Creating default Display subsection in Screen section
    "nvidia" for depth/fbbpp 24/32
    [ 11.514] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
    [ 11.514] (==) NVIDIA(0): RGB weight 888
    [ 11.514] (==) NVIDIA(0): Default visual is TrueColor
    [ 11.514] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
    [ 11.514] (**) NVIDIA(0): Option "UseEdidDpi" "FALSE"
    [ 11.514] (**) NVIDIA(0): Option "DPI" "106 x 106"
    [ 11.514] (**) NVIDIA(0): Option "AllowEmptyInitialConfiguration"
    [ 11.514] (**) NVIDIA(0): Enabling 2D acceleration
    [ 11.514] (EE) NVIDIA(0): Failed to initialize the GLX module; please check in your X
    [ 11.514] (EE) NVIDIA(0): log file that the GLX module has been loaded in your X
    [ 11.514] (EE) NVIDIA(0): server, and that the module is the NVIDIA GLX module. If
    [ 11.514] (EE) NVIDIA(0): you continue to encounter problems, Please try
    [ 11.514] (EE) NVIDIA(0): reinstalling the NVIDIA driver.
    [ 12.009] (II) NVIDIA(GPU-0): Found DRM driver nvidia-drm (20130102)
    [ 12.010] (II) NVIDIA(0): NVIDIA GPU GeForce GTX 765M (GK106) at PCI:1:0:0 (GPU-0)
    [ 12.010] (--) NVIDIA(0): Memory: 2097152 kBytes
    [ 12.010] (--) NVIDIA(0): VideoBIOS: 80.06.51.00.17
    [ 12.010] (II) NVIDIA(0): Detected PCI Express Link width: 16X
    [ 12.010] (--) NVIDIA(0): Valid display device(s) on GeForce GTX 765M at PCI:1:0:0
    [ 12.010] (--) NVIDIA(0): none
    [ 12.010] (II) NVIDIA(0): Validated MetaModes:
    [ 12.010] (II) NVIDIA(0): "NULL"
    [ 12.010] (II) NVIDIA(0): Virtual screen size determined to be 640 x 480
    [ 12.010] (**) NVIDIA(0): DPI set to (106, 106); computed from "DPI" X config option
    [ 12.010] (==) modesetting(G0): Depth 24, (==) framebuffer bpp 32
    [ 12.010] (==) modesetting(G0): RGB weight 888
    [ 12.010] (==) modesetting(G0): Default visual is TrueColor
    [ 12.010] (II) modesetting(G0): ShadowFB: preferred YES, enabled YES
    [ 12.011] (II) modesetting(G0): Output eDP-1-0 has no monitor section
    [ 12.012] (II) modesetting(G0): Output VGA-1-0 has no monitor section
    [ 12.012] (II) modesetting(G0): Output HDMI-1-0 has no monitor section
    [ 12.013] (II) modesetting(G0): EDID for output eDP-1-0
    [ 12.013] (II) modesetting(G0): Manufacturer: CMO Model: 1720 Serial#: 0
    [ 12.013] (II) modesetting(G0): Year: 2011 Week: 2
    [ 12.013] (II) modesetting(G0): EDID Version: 1.4
    [ 12.013] (II) modesetting(G0): Digital Display Input
    [ 12.013] (II) modesetting(G0): 6 bits per channel
    [ 12.013] (II) modesetting(G0): Digital interface is undefined
    [ 12.013] (II) modesetting(G0): Max Image Size [cm]: horiz.: 38 vert.: 21
    [ 12.013] (II) modesetting(G0): Gamma: 2.20
    [ 12.013] (II) modesetting(G0): No DPMS capabilities specified
    [ 12.013] (II) modesetting(G0): Supported color encodings: RGB 4:4:4
    [ 12.013] (II) modesetting(G0): First detailed timing is preferred mode
    [ 12.013] (II) modesetting(G0): Preferred mode is native pixel format and refresh rate
    [ 12.013] (II) modesetting(G0): redX: 0.640 redY: 0.330 greenX: 0.300 greenY: 0.610
    [ 12.013] (II) modesetting(G0): blueX: 0.150 blueY: 0.060 whiteX: 0.313 whiteY: 0.329
    [ 12.013] (II) modesetting(G0): Manufacturer's mask: 0
    [ 12.013] (II) modesetting(G0): Supported detailed timing:
    [ 12.013] (II) modesetting(G0): clock: 140.5 MHz Image Size: 382 x 215 mm
    [ 12.013] (II) modesetting(G0): h_active: 1920 h_sync: 1972 h_sync_end 2007 h_blank_end 2094 h_border: 0
    [ 12.013] (II) modesetting(G0): v_active: 1080 v_sync: 1083 v_sync_end 1089 v_blanking: 1118 v_border: 0
    [ 12.013] (II) modesetting(G0): Supported detailed timing:
    [ 12.013] (II) modesetting(G0): clock: 92.5 MHz Image Size: 382 x 215 mm
    [ 12.013] (II) modesetting(G0): h_active: 1920 h_sync: 1968 h_sync_end 2000 h_blank_end 2080 h_border: 0
    [ 12.013] (II) modesetting(G0): v_active: 1080 v_sync: 1083 v_sync_end 1088 v_blanking: 1111 v_border: 0
    [ 12.013] (II) modesetting(G0): HC9GKÄ173HGE
    [ 12.013] (II) modesetting(G0): Unknown vendor-specific block 0
    [ 12.013] (II) modesetting(G0): EDID (in hex):
    [ 12.013] (II) modesetting(G0): 00ffffffffffff000daf201700000000
    [ 12.013] (II) modesetting(G0): 021501049026157802ed95a3544c9c26
    [ 12.013] (II) modesetting(G0): 0f505400000001010101010101010101
    [ 12.013] (II) modesetting(G0): 010101010101e13680ae703826403423
    [ 12.013] (II) modesetting(G0): 36007ed71000001a1d2480a070381f40
    [ 12.013] (II) modesetting(G0): 302035007ed71000001a000000fe0048
    [ 12.013] (II) modesetting(G0): 4339474b803137334847450a00000000
    [ 12.013] (II) modesetting(G0): 000041319e0000000002010a202000f3
    [ 12.013] (II) modesetting(G0): Printing probed modes for output eDP-1-0
    [ 12.013] (II) modesetting(G0): Modeline "1920x1080"x60.0 140.49 1920 1972 2007 2094 1080 1083 1089 1118 +hsync -vsync (67.1 kHz eP)
    [ 12.013] (II) modesetting(G0): Modeline "1920x1080"x40.0 92.45 1920 1968 2000 2080 1080 1083 1088 1111 +hsync -vsync (44.4 kHz e)
    [ 12.013] (II) modesetting(G0): Modeline "1400x1050"x60.0 122.00 1400 1488 1640 1880 1050 1052 1064 1082 +hsync +vsync (64.9 kHz d)
    [ 12.013] (II) modesetting(G0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz d)
    [ 12.013] (II) modesetting(G0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz d)
    [ 12.013] (II) modesetting(G0): Modeline "1024x768"x120.1 133.47 1024 1100 1212 1400 768 768 770 794 doublescan -hsync +vsync (95.3 kHz d)
    [ 12.013] (II) modesetting(G0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d)
    [ 12.013] (II) modesetting(G0): Modeline "960x720"x120.0 117.00 960 1024 1128 1300 720 720 722 750 doublescan -hsync +vsync (90.0 kHz d)
    [ 12.013] (II) modesetting(G0): Modeline "928x696"x120.1 109.15 928 976 1088 1264 696 696 698 719 doublescan -hsync +vsync (86.4 kHz d)
    [ 12.013] (II) modesetting(G0): Modeline "896x672"x120.0 102.40 896 960 1060 1224 672 672 674 697 doublescan -hsync +vsync (83.7 kHz d)
    [ 12.013] (II) modesetting(G0): Modeline "800x600"x120.0 81.00 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync (75.0 kHz d)
    [ 12.013] (II) modesetting(G0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
    [ 12.013] (II) modesetting(G0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
    [ 12.013] (II) modesetting(G0): Modeline "700x525"x120.0 61.00 700 744 820 940 525 526 532 541 doublescan +hsync +vsync (64.9 kHz d)
    [ 12.013] (II) modesetting(G0): Modeline "640x512"x120.0 54.00 640 664 720 844 512 512 514 533 doublescan +hsync +vsync (64.0 kHz d)
    [ 12.013] (II) modesetting(G0): Modeline "640x480"x120.0 54.00 640 688 744 900 480 480 482 500 doublescan +hsync +vsync (60.0 kHz d)
    [ 12.013] (II) modesetting(G0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
    [ 12.013] (II) modesetting(G0): Modeline "512x384"x120.0 32.50 512 524 592 672 384 385 388 403 doublescan -hsync -vsync (48.4 kHz d)
    [ 12.013] (II) modesetting(G0): Modeline "400x300"x120.6 20.00 400 420 484 528 300 300 302 314 doublescan +hsync +vsync (37.9 kHz d)
    [ 12.013] (II) modesetting(G0): Modeline "400x300"x112.7 18.00 400 412 448 512 300 300 301 312 doublescan +hsync +vsync (35.2 kHz d)
    [ 12.013] (II) modesetting(G0): Modeline "320x240"x120.1 12.59 320 328 376 400 240 245 246 262 doublescan -hsync -vsync (31.5 kHz d)
    [ 12.014] (II) modesetting(G0): EDID for output VGA-1-0
    [ 12.014] (II) modesetting(G0): EDID for output HDMI-1-0
    [ 12.014] (II) modesetting(G0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
    [ 12.014] (==) modesetting(G0): DPI set to (96, 96)
    [ 12.014] (II) Loading sub module "fb"
    [ 12.014] (II) LoadModule: "fb"
    [ 12.014] (II) Loading /usr/lib/xorg/modules/libfb.so
    [ 12.014] (II) Module fb: vendor="X.Org Foundation"
    [ 12.014] compiled for 1.16.1, module version = 1.0.0
    [ 12.014] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 12.014] (II) Loading sub module "shadow"
    [ 12.014] (II) LoadModule: "shadow"
    [ 12.014] (II) Loading /usr/lib/xorg/modules/libshadow.so
    [ 12.015] (II) Module shadow: vendor="X.Org Foundation"
    [ 12.015] compiled for 1.16.1, module version = 1.1.0
    [ 12.015] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 12.015] (--) Depth 24 pixmap format is 32 bpp
    [ 12.017] (==) modesetting(G0): Backing store enabled
    [ 12.017] (==) modesetting(G0): Silken mouse enabled
    [ 12.017] (II) modesetting(G0): RandR 1.2 enabled, ignore the following RandR disabled message.
    [ 12.017] (==) modesetting(G0): DPMS enabled
    [ 12.017] (WW) modesetting(G0): Option "AllowEmptyInitialConfiguration" is not used
    [ 13.273] (II) NVIDIA: Using 3072.00 MB of virtual memory for indirect memory
    [ 13.273] (II) NVIDIA: access.
    [ 13.277] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
    [ 13.277] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
    [ 13.277] (II) NVIDIA(0): configuration option may not be set correctly. When the
    [ 13.277] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
    [ 13.277] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
    [ 13.277] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
    [ 13.277] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
    [ 13.277] (II) NVIDIA(0): Config Options in the README.
    [ 13.277] (II) NVIDIA(0): Setting mode "NULL"
    [ 13.277] (EE) NVIDIA(0): Failed to initiate mode change.
    [ 13.277] (EE) NVIDIA(0): Failed to complete mode change
    [ 13.287] (II) NVIDIA(0): Built-in logo is bigger than the screen.
    [ 13.291] (==) NVIDIA(0): Disabling shared memory pixmaps
    [ 13.291] (==) NVIDIA(0): Backing store enabled
    [ 13.291] (==) NVIDIA(0): Silken mouse enabled
    [ 13.291] (==) NVIDIA(0): DPMS enabled
    [ 13.331] (II) Loading sub module "dri2"
    [ 13.331] (II) LoadModule: "dri2"
    [ 13.331] (II) Module "dri2" already built-in
    [ 13.331] (II) NVIDIA(0): [DRI2] Setup complete
    [ 13.331] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
    [ 13.331] (--) RandR disabled
    [ 13.335] (II) AIGLX: Screen 0 is not DRI2 capable
    [ 13.335] (EE) AIGLX: reverting to software rendering
    [ 13.421] (II) AIGLX: Loaded and initialized swrast
    [ 13.421] (II) GLX: Initialized DRISWRAST GL provider for screen 0
    [ 13.421] (II) modesetting(G0): Damage tracking initialized
    [ 13.467] (II) config/udev: Adding input device Power Button (/dev/input/event4)
    [ 13.467] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 13.467] (II) LoadModule: "evdev"
    [ 13.467] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 13.469] (II) Module evdev: vendor="X.Org Foundation"
    [ 13.469] compiled for 1.16.0, module version = 2.9.0
    [ 13.469] Module class: X.Org XInput Driver
    [ 13.469] ABI class: X.Org XInput driver, version 21.0
    [ 13.469] (II) Using input driver 'evdev' for 'Power Button'
    [ 13.469] (**) Power Button: always reports core events
    [ 13.469] (**) evdev: Power Button: Device: "/dev/input/event4"
    [ 13.470] (--) evdev: Power Button: Vendor 0 Product 0x1
    [ 13.470] (--) evdev: Power Button: Found keys
    [ 13.470] (II) evdev: Power Button: Configuring as keyboard
    [ 13.470] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input8/event4"
    [ 13.470] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
    [ 13.470] (**) Option "xkb_rules" "evdev"
    [ 13.470] (**) Option "xkb_model" "pc104"
    [ 13.470] (**) Option "xkb_layout" "us"
    [ 13.482] (II) config/udev: Adding input device Video Bus (/dev/input/event8)
    [ 13.482] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
    [ 13.482] (II) Using input driver 'evdev' for 'Video Bus'
    [ 13.482] (**) Video Bus: always reports core events
    [ 13.482] (**) evdev: Video Bus: Device: "/dev/input/event8"
    [ 13.482] (--) evdev: Video Bus: Vendor 0 Product 0x6
    [ 13.482] (--) evdev: Video Bus: Found keys
    [ 13.482] (II) evdev: Video Bus: Configuring as keyboard
    [ 13.482] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input15/event8"
    [ 13.482] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
    [ 13.482] (**) Option "xkb_rules" "evdev"
    [ 13.482] (**) Option "xkb_model" "pc104"
    [ 13.482] (**) Option "xkb_layout" "us"
    [ 13.482] (II) config/udev: Adding input device Video Bus (/dev/input/event7)
    [ 13.482] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
    [ 13.482] (II) Using input driver 'evdev' for 'Video Bus'
    [ 13.482] (**) Video Bus: always reports core events
    [ 13.482] (**) evdev: Video Bus: Device: "/dev/input/event7"
    [ 13.482] (--) evdev: Video Bus: Vendor 0 Product 0x6
    [ 13.482] (--) evdev: Video Bus: Found keys
    [ 13.482] (II) evdev: Video Bus: Configuring as keyboard
    [ 13.482] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:4f/LNXVIDEO:00/input/input14/event7"
    [ 13.482] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
    [ 13.482] (**) Option "xkb_rules" "evdev"
    [ 13.482] (**) Option "xkb_model" "pc104"
    [ 13.482] (**) Option "xkb_layout" "us"
    [ 13.482] (II) config/udev: Adding input device Power Button (/dev/input/event1)
    [ 13.482] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 13.482] (II) Using input driver 'evdev' for 'Power Button'
    [ 13.482] (**) Power Button: always reports core events
    [ 13.482] (**) evdev: Power Button: Device: "/dev/input/event1"
    [ 13.482] (--) evdev: Power Button: Vendor 0 Product 0x1
    [ 13.482] (--) evdev: Power Button: Found keys
    [ 13.482] (II) evdev: Power Button: Configuring as keyboard
    [ 13.482] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input5/event1"
    [ 13.482] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 9)
    [ 13.482] (**) Option "xkb_rules" "evdev"
    [ 13.482] (**) Option "xkb_model" "pc104"
    [ 13.482] (**) Option "xkb_layout" "us"
    [ 13.483] (II) config/udev: Adding input device Lid Switch (/dev/input/event3)
    [ 13.483] (II) No input driver specified, ignoring this device.
    [ 13.483] (II) This device may have been added with another device file.
    [ 13.483] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
    [ 13.483] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
    [ 13.483] (II) Using input driver 'evdev' for 'Sleep Button'
    [ 13.483] (**) Sleep Button: always reports core events
    [ 13.483] (**) evdev: Sleep Button: Device: "/dev/input/event2"
    [ 13.483] (--) evdev: Sleep Button: Vendor 0 Product 0x3
    [ 13.483] (--) evdev: Sleep Button: Found keys
    [ 13.483] (II) evdev: Sleep Button: Configuring as keyboard
    [ 13.483] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input6/event2"
    [ 13.483] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 10)
    [ 13.483] (**) Option "xkb_rules" "evdev"
    [ 13.483] (**) Option "xkb_model" "pc104"
    [ 13.483] (**) Option "xkb_layout" "us"
    [ 13.483] (II) config/udev: Adding drm device (/dev/dri/card1)
    [ 13.483] (II) xfree86: Adding drm device (/dev/dri/card1)
    [ 13.483] (EE) /dev/dri/card1: failed to set DRM interface version 1.4: Permission denied
    [ 13.483] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=3 (/dev/input/event9)
    [ 13.483] (II) No input driver specified, ignoring this device.
    [ 13.483] (II) This device may have been added with another device file.
    [ 13.483] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=7 (/dev/input/event10)
    [ 13.483] (II) No input driver specified, ignoring this device.
    [ 13.483] (II) This device may have been added with another device file.
    [ 13.483] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=8 (/dev/input/event11)
    [ 13.483] (II) No input driver specified, ignoring this device.
    [ 13.483] (II) This device may have been added with another device file.
    [ 13.483] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event12)
    [ 13.483] (II) No input driver specified, ignoring this device.
    [ 13.483] (II) This device may have been added with another device file.
    [ 13.483] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event13)
    [ 13.483] (II) No input driver specified, ignoring this device.
    [ 13.483] (II) This device may have been added with another device file.
    [ 13.484] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
    [ 13.484] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
    [ 13.484] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
    [ 13.484] (**) AT Translated Set 2 keyboard: always reports core events
    [ 13.484] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
    [ 13.484] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
    [ 13.484] (--) evdev: AT Translated Set 2 keyboard: Found keys
    [ 13.484] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
    [ 13.484] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
    [ 13.484] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 11)
    [ 13.484] (**) Option "xkb_rules" "evdev"
    [ 13.484] (**) Option "xkb_model" "pc104"
    [ 13.484] (**) Option "xkb_layout" "us"
    [ 13.484] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event6)
    [ 13.484] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
    [ 13.484] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
    [ 13.484] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
    [ 13.484] (II) LoadModule: "synaptics"
    [ 13.484] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
    [ 13.485] (II) Module synaptics: vendor="X.Org Foundation"
    [ 13.485] compiled for 1.16.0, module version = 1.8.1
    [ 13.485] Module class: X.Org XInput Driver
    [ 13.485] ABI class: X.Org XInput driver, version 21.0
    [ 13.485] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
    [ 13.485] (**) SynPS/2 Synaptics TouchPad: always reports core events
    [ 13.485] (**) Option "Device" "/dev/input/event6"
    [ 13.596] (II) synaptics: SynPS/2 Synaptics TouchPad: ignoring touch events for semi-multitouch device
    [ 13.596] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5692 (res 66)
    [ 13.596] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4680 (res 102)
    [ 13.596] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
    [ 13.596] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
    [ 13.596] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
    [ 13.596] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
    [ 13.596] (**) Option "TapButton1" "1"
    [ 13.596] (**) Option "TapButton2" "2"
    [ 13.596] (**) Option "TapButton3" "3"
    [ 13.596] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
    [ 13.596] (**) SynPS/2 Synaptics TouchPad: always reports core events
    [ 13.650] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio2/input/input11/event6"
    [ 13.650] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 12)
    [ 13.650] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
    [ 13.650] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 1.75
    [ 13.650] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.037
    [ 13.650] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
    [ 13.650] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
    [ 13.650] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
    [ 13.650] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
    [ 13.650] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
    [ 13.650] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
    [ 13.650] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
    [ 13.650] (II) config/udev: Adding input device PC Speaker (/dev/input/event5)
    [ 13.650] (II) No input driver specified, ignoring this device.
    [ 13.650] (II) This device may have been added with another device file.
    [ 13.668] removing GPU device /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0/drm/card1 /dev/dri/card1
    [ 13.668] (II) config/udev: Adding drm device (/dev/dri/card1)
    [ 13.668] (II) xfree86: Adding drm device (/dev/dri/card1)
    [ 13.668] (EE) /dev/dri/card1: failed to set DRM interface version 1.4: Permission denied
    lspci
    00:00.0 Host bridge: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor DRAM Controller (rev 06)
    00:01.0 PCI bridge: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor PCI Express x16 Controller (rev 06)
    00:02.0 VGA compatible controller: Intel Corporation 4th Gen Core Processor Integrated Graphics Controller (rev 06)
    00:03.0 Audio device: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor HD Audio Controller (rev 06)
    00:14.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB xHCI (rev 05)
    00:16.0 Communication controller: Intel Corporation 8 Series/C220 Series Chipset Family MEI Controller #1 (rev 04)
    00:1a.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB EHCI #2 (rev 05)
    00:1b.0 Audio device: Intel Corporation 8 Series/C220 Series Chipset High Definition Audio Controller (rev 05)
    00:1c.0 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #1 (rev d5)
    00:1c.2 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #3 (rev d5)
    00:1c.3 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #4 (rev d5)
    00:1d.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB EHCI #1 (rev 05)
    00:1f.0 ISA bridge: Intel Corporation HM87 Express LPC Controller (rev 05)
    00:1f.2 SATA controller: Intel Corporation 8 Series/C220 Series Chipset Family 6-port SATA Controller 1 [AHCI mode] (rev 05)
    00:1f.3 SMBus: Intel Corporation 8 Series/C220 Series Chipset Family SMBus Controller (rev 05)
    01:00.0 3D controller: NVIDIA Corporation GK106M [GeForce GTX 765M] (rev a1)
    03:00.0 Network controller: Intel Corporation Centrino Wireless-N 135 (rev c4)
    04:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. Device 5289 (rev 01)
    04:00.2 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 0a)
    lspci -vv for the vga and 3d controllers (this is an Optimus laptop):
    00:02.0 VGA compatible controller: Intel Corporation 4th Gen Core Processor Integrated Graphics Controller (rev 06) (prog-if 00 [VGA controller])
    Subsystem: CLEVO/KAPOK Computer Device 3537
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
    Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0
    Interrupt: pin A routed to IRQ 49
    Region 0: Memory at f7400000 (64-bit, non-prefetchable) [size=4M]
    Region 2: Memory at d0000000 (64-bit, prefetchable) [size=256M]
    Region 4: I/O ports at f000 [size=64]
    Expansion ROM at <unassigned> [disabled]
    Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit-
    Address: fee00018 Data: 0000
    Capabilities: [d0] Power Management version 2
    Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
    Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
    Capabilities: [a4] PCI Advanced Features
    AFCap: TP+ FLR+
    AFCtrl: FLR-
    AFStatus: TP-
    Kernel driver in use: i915
    Kernel modules: i915
    01:00.0 3D controller: NVIDIA Corporation GK106M [GeForce GTX 765M] (rev a1)
    Subsystem: CLEVO/KAPOK Computer Device 3537
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0
    Interrupt: pin A routed to IRQ 52
    Region 0: Memory at f6000000 (32-bit, non-prefetchable) [size=16M]
    Region 1: Memory at e0000000 (64-bit, prefetchable) [size=256M]
    Region 3: Memory at f0000000 (64-bit, prefetchable) [size=32M]
    Region 5: I/O ports at e000 [size=128]
    [virtual] Expansion ROM at f7000000 [disabled] [size=512K]
    Capabilities: [60] Power Management version 3
    Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
    Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
    Capabilities: [68] MSI: Enable+ Count=1/1 Maskable- 64bit+
    Address: 00000000fee00438 Data: 0000
    Capabilities: [78] Express (v2) Endpoint, MSI 00
    DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s unlimited, L1 <64us
    ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
    DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
    RlxdOrd+ ExtTag+ PhantFunc- AuxPwr- NoSnoop+
    MaxPayload 128 bytes, MaxReadReq 512 bytes
    DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
    LnkCap: Port #0, Speed 8GT/s, Width x16, ASPM L0s L1, Exit Latency L0s <512ns, L1 <4us
    ClockPM+ Surprise- LLActRep- BwNot-
    LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk+
    ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt-
    LnkSta: Speed 2.5GT/s, Width x8, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
    DevCap2: Completion Timeout: Range AB, TimeoutDis+, LTR-, OBFF Not Supported
    DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled
    LnkCtl2: Target Link Speed: 8GT/s, EnterCompliance- SpeedDis-
    Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
    Compliance De-emphasis: -6dB
    LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete+, EqualizationPhase1+
    EqualizationPhase2+, EqualizationPhase3+, LinkEqualizationRequest+
    Capabilities: [b4] Vendor Specific Information: Len=14 <?>
    Capabilities: [100 v1] Virtual Channel
    Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
    Arb: Fixed- WRR32- WRR64- WRR128-
    Ctrl: ArbSelect=Fixed
    Status: InProgress-
    VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
    Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
    Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
    Status: NegoPending- InProgress-
    Capabilities: [128 v1] Power Budgeting <?>
    Capabilities: [600 v1] Vendor Specific Information: ID=0001 Rev=1 Len=024 <?>
    Capabilities: [900 v1] #19
    Kernel driver in use: nvidia
    Kernel modules: nouveau, nvidia
    /etc/X11/xorg.conf
    Section "ServerLayout"
    Identifier "layout"
    Screen 0 "nvidia"
    Inactive "intel"
    EndSection
    Section "Device"
    Identifier "nvidia"
    Driver "nvidia"
    BusID "PCI:PCI address determined earlier"
    # e.g. BusID "PCI:1:0:0"
    EndSection
    Section "Screen"
    Identifier "nvidia"
    Device "nvidia"
    Option "AllowEmptyInitialConfiguration"
    EndSection
    Section "Device"
    Identifier "intel"
    Driver "modesetting"
    EndSection
    Section "Screen"
    Identifier "intel"
    Device "intel"
    EndSection
    systemctl status:
    ● feynman
    State: running
    Jobs: 0 queued
    Failed: 0 units
    Since: Mon 2014-09-29 22:49:32 BST; 7min ago
    CGroup: /
    ├─1 /sbin/init
    ├─system.slice
    │ ├─dbus.service
    │ │ └─394 /usr/bin/dbus-daemon --system --address=systemd: --nofork --nopidfile --systemd-activation
    │ ├─system-netctl\x2dauto.slice
    │ │ └─[email protected]
    │ │ ├─418 wpa_supplicant -B -P /run/wpa_supplicant_wlp3s0.pid -i wlp3s0 -D nl80211,wext -c/run/network/wpa_supplicant_wlp3s0.conf -W
    │ │ ├─420 wpa_actiond -p /run/wpa_supplicant -i wlp3s0 -P /run/network/wpa_actiond_wlp3s0.pid -a /usr/lib/network/auto.action
    │ │ └─545 dhcpcd -4 -q -t 30 -K -L wlp3s0
    │ ├─systemd-journald.service
    │ │ └─192 /usr/lib/systemd/systemd-journald
    │ ├─systemd-logind.service
    │ │ └─393 /usr/lib/systemd/systemd-logind
    │ ├─systemd-udevd.service
    │ │ └─222 /usr/lib/systemd/systemd-udevd
    │ ├─kdm.service
    │ │ ├─408 /usr/bin/kdm -nodaemon
    │ │ ├─410 /usr/bin/Xorg.bin -br -novtswitch -quiet :0 vt7 -nolisten tcp -auth /var/run/xauth/A:0-XeCSpb
    │ │ ├─493 -:0
    │ │ └─494 /usr/lib/kde4/libexec/kdm_greet
    │ └─gpm.service
    │ └─395 /usr/bin/gpm -m /dev/input/mice -t imps2
    └─user.slice
    └─user-0.slice
    ├─[email protected]
    │ ├─547 /usr/lib/systemd/systemd --user
    │ └─549 (sd-pam)
    └─session-c1.scope
    ├─407 login -- root
    ├─551 -bash
    └─591 systemctl status

  • Ipad mirroring on Apple TV getting black screen after os upgrade to 7.0.3

    Ipad mirroring works in 7.0.2. After upgrading to 7.0.3, on mirroring the screen goes black. Do we need to upgrade Apple TV or is this something else?

    I have the same problem since my upgrade to iOS 8. black screen, no mirroring. It worked perfect until the latest iOS 7 version on my iPad 2

  • Re: Satellite L40 - Black screen after updating BIOS

    Hi everyone,
    I have exactly the same problem as reported here:
    http://forums.computers.toshiba-euro...threadID=35156
    My portable is a Satellite L40-150 (Model PSL48E) It came with Vista and BIOS version 1.60
    I updated the BIOS to version 5.50, because I wanted to install Windows XP. The BIOS update process went fine and the computer automatically restarted. Upon restarting, I entered the BIOS (pressing F2 key). I pressed F9 to load default settings and exited the BIOS, saving the changes.
    The laptop restarted and the screen is now completely blank. Nothing appears in it.
    I tried removing and then reinserting the RAM modules, but it didn't help.
    So, I guess the only option is to return the laptop to a service center?
    Why is Toshiba doing this? Are they doing this on purpose or what?
    Regards.

    I meant why is Toshiba releasing a BIOS upgrade that can render your laptop useless? (I've tried all the recovery methods they mention on their web, including turning on the laptop while pressing F12, but none of them work)
    I've routinely upgraded the BIOS on all the computers I've owned through the years, and I've always reset the BIOS to its default settings right after upgrading. It's a procedure recommended by all manufacturers.
    They all recommend to restore BIOS defaults after an upgrade because sometimes there can be some "leftover" configuration remaining from the previous BIOS version.
    I upgraded the BIOS prior to installing Windows XP because it's the logical thing to do. Toshiba offers two different BIOS versions for my laptop, and the clearly state that one of them is compatible ONLY with Windows Vista, and the other one is compatible ONLY with Windows XP.
    Could you tell me why should I install Windows XP on a laptop that has a BIOS designed for Vista? Common sense dictates that you should first upgrade the BIOS, and then install Windows XP.
    I've contacted Toshiba's technical support and they will replace the laptop free of charge, because it's still under warranty.
    I admit I'm satisfied with their customer care services, but I'm surely disappointed by their Quality Control. It has failed miserably in this BIOS release.
    Regards.

  • Satellite A100 shuts down after memory upgrade

    Consider me as 1 of the thickie bunch.. Not even sure wot im talkin bout but here goes n e way...........
    Have a Satellite A100 570 ( PSAA2E)..........
    Have tried several different online sites lookin for memory upgrade. Didn't have the witt to use toshiba site...... Ended up going with Crucial.........
    Ran diagnostic on laptop and was sent the module a needed.or so i thought....... wrong 1 or 1s as i bought 2 x 1G modules in order to " double up".....
    Got my money back as they were not compatable with my system.. something to do with density problems....
    Tried company called OFFTEK........ they seemed to know what they were talkin about....... I have from Offtek. at present a..........
    200 Pin 1.8v DDR2 PC2-4200 SoDimm....... but Toshiba have recommended below......
    1GB PC2-4300 DDR2 Memory (533MHz)
    Part Number: PA3411U-2M1G
    1024MB (1GB) Memory PC2-4300 DDR2 (533MHz)
    Theres an obvious difference ...... 4200 and 4300. But im not sure if its a significant difference........... or what it means
    Have updated bios to most recent version and basically updated everything toshiba had to offer for this model...........
    Ran EVEREST and it recognises the 1G module but when i take out the original 512mb module the laptop starts for about 3 seconds then shuts down...
    this repeats about 5 times then complete shutdown.....
    I dont like opening the back cover too often but this is the 3rd module ....
    Not sure whats meant to happen if the module is working...i.e start up message..not sure if windows recognises 1G module....
    Would it be safer bet to send Offtek module and stick with toshiba option.....
    Thanks in advance.....

    Cheers R2........ suppose at this stage i could start rhyming off a load of star wars lines but uve probably hears them all before.......
    N e way......... checked out the link u posted..........very useful......
    The module described is identical to what i have.............As with previous reply ( above ) im not sure what to do.........might take up Offteks offer of replacing the module but slightly concerned it might have same outcome......Still not happy bout opening the cover so much........nut needs must i suppose

  • Ipad2 showing black screen after being upgraded to ios5

    I upgraded IPad2 to ios5 through Mac, since then - for 5 hours - it has apple on black screen and mur-murs something every 5 minutes. For how long might it continue ?

    Hello BitMazta, please tell us a little more about your computer:1.) More detail on the model number (example Probook 4710S).2.) How much ram does your computer have? 3.) I have two great links at this recent thread that could help you: Upgrade to Win 10 Good luck! 

  • Satellite U500 - Black screen after inactivity

    Hi to all,
    I have a recent problem on my U500.
    My Computer would "lock" itself up and a black screen would come and nothing would respond. I can still see the power light is still on but nothing. No screensaver is on. I have to hold to on button to shut off. This happened 3 times.
    Also my PC is running abnormly slower than normal dont think there is a virus though.
    Note: i have Recently System restored my PC
    Thanks

    Hi.
    Hmmm I think it was some BIOS update but im still not sure.I have'nt see it anymore yet and that brings me to my next concern.My Pc is running extremely slow.Like one day,I turn it on and yes its fine, yet strangely 4-6 days later i turn it on and its sooo slow.
    Normal Opening Google chrome would take lets say instant-1 Sec
    Now- 30+ sec and would crash.
    Now im doing system restore. Also i dont have any form of antivirus Except for Malewarebytes antimalware which i scam everynow and then.
    Yes Window 7 Home Premium x64
    Thanks

  • Satellite A200 - black screen after standby/hibernate

    Hi,
    I just bought my computer 1 week ago. It??s a notebook A200 series and every time I tried to suspend/hibernate it, it doesn't resume back or wake up. The power light is still on. The fan is still on. Even the num pad lock responds.
    The Screen is black and not responding. I can only restart the computer every time this happens. I tried to search the web for this problem and I found other people with the same problem.
    I only bought my laptop for a week, can??t believe this is happening.
    Please provide me with a solution.
    Edited by: ADMIN

    I contacted toshiba around Janurary. I had the same problem on my Satellite A215-S7428. I dont remember what they told me to do. It envolved taking ount the battery, going to some window and changint the power settings for the moniter, like how much power does the moniter use on battery and when it is plugged in. They were set very low, around 20% and I had to raise them to 100%. That seemed to help. But now it is starting again. I happens when the screen is closed and the computer sleeps. When I open the screen, it is black. I used to have to restart my laptop just so I could it, after I contacted the support and changed the power stuff, it came right up in around 10 sec. Now it takes around 30secs. So does anyone know how to access the power setting window i am taliking about?

  • Satellite L500 - black screen after manual or auto restart

    Hi everyone,
    This has frustrated me for three weeks but I have only just realised it is associated with restart either manual or software requested.
    My 6 week old L500 laptop refuses to do other than display lights for indiactors on front - no light on keyboard, no screen, fan running but no disk activity I can hear.
    I have somehow managed to break through on three occasions by forcing shut down using the power on/off hold down, removing battery waiting and then starting up.
    Earlier today it decided to restart under this method and I was able to quickly jump in and dump my Libraries and outlook.pst to an external hard drive cause my business runs off it.
    Anyone know a solution to this problem?
    This is the first Toshiba I have ever owned and it's really frustrating to have to fire up this 4 year old Acer to find a solution to my problem.
    Maybe the problem is Windows 7 but can't find my way through that place to an answer.
    Anyone, please???

    Hi
    You mean the L500 does not boot anymore?
    The workaround removing the battery and ac adaptor doesnt help anymore?
    Hmm usually this should not happen sometimes the notebook could hang somewhere during the stand by or hibernation and the mentioned workaround could be a option to wake up the unit
    Its hard to say whats going wrong here possibly its hardware related issue
    So maybe it would be the best get in contact with an local ASP the warranty should be valid and I think everything should be done for free

  • Black Screen After Upgrading to Windows 8

    Hi
    I'm experiencing a black screen after upgrading a Dell N5050 B890 to Windows 8.
    Tried to refresh the installation but the problem persited. re-installed the Windows 8, the machine logged in successfully but the problem arose again after reboot.
    Urgent assistance needed 

    This problem is solved...
    I guess the problem is concerned with the display module controller in the BIOS which is having a slight compatibility issue with windows 8.
    This issue is solved by updating the BIOS of your Laptop/PC to the latest version. You can download the latest BIOS from the website of the Laptop company/Motherboard Company. 
    But for updating the BIOS, you have to start your computer/Laptop for at least one time in Normal Mode. So here are the steps to do so... 
    1) Boot the Laptop/PC.
    2) After the boot screen (The Circle Animation & Windows 8 logo), you will be presented by the lovely & awesome blank screen.
    3) Wait for 1 minute so that drivers load into the memory.
    4) Press the Power button of your laptop/PC for only a moment (Just Press and release it quickly. Don't hold. We don't want to shut down).
    5) This will force the laptop/PC to go into Sleep mode.
    6) When the laptop/PC goes in sleep, the laptop fan & other sounds will stop.
    7) After 4-5 seconds, press the power button again & release it quickly.
    8) Voilllaa!!! The laptop/PC starts & you are presented with the lock screen. Now..... Login! What are you waiting for! :P  
    This is not the permanent solution. It just lets you start you Laptop/PC.
    After updating the BIOS, I strongly suggest that you must download the latest graphics driver for your Computer/Laptop to avoid any further issues.

  • Black Screen After Windows 8 64-bit Upgrade (Clean Install) on TouchSmart IQ508A (IQ500 series)

    Hi there,
    Just installed Windows 8 and am getting a black screen after booting up like many others. I currently have disabled the graphics driver and this has solved the black screen issue but I can no longer use my web cam for Skype (although web cam works for W8 Camera App oddly).
    To date I have tried the following:
    Loading up the latest Nvidia drivers from the Nvidia website
    Attempting to use the drivers for Windows 7 both in compatability mode and normally. I unzipped SP44488 to get this working
    I know many others are having this problem so I really would  like someone from HP to respond and state whether a Windows 8 display driver for the Nvidia GE Force 9300M GS is being developed.
    I ran the compatability wizard prior to the clean install and it came up with no issues so I am very disappointed I am having these problems.
    I've found out that HP have a customised version of the above card so that explains why the Nvidia drivers dont work so I believe HP is therefore obligated to provide a driver.
    If anyone else is having similar issues please respond as this will hopefully lead to more action.
    cheers
    Steve

    I'm in the same boat. On my IQ804, the Nvidia GE Force 9300M GS card crashes when I use NVidia's latest Windows 8 driver and Microsoft's LIVE UPDATE drivers.  I have to resort to the Standard VGA driver in order for the pc not to crash into a black screen.
    I read on another forum you can try installing a July 2012 version of the driver from NVidia and that should solve the problem.  I tried it once. Using the July 2012 version, the screen would stay on longer, but eventually it crashes into a black screen...but definitely more usable than the latest from NVidia and Microsoft.
    I too have heard that HP used a customized version of the graphics card and that's why neither HP nor NVidia's drivers work.
    I also tried installing the Nvidia GE Force 9300M GS drivers for Windows 7 that I downloaded from the HP website.  It didn't work either.  It actually failed to install altogether, saying my system is incompatible.
    As is, the pc works fine.  But videos and games that require motion is noticably choppy.
    Any help from HP??

  • Black screen after startup - Satellite A105-S4334

    it gives me black screen after windows logo display right after the appearance of the cursor, and nothing i can do except hold on the "Turn off" button, and then restart again, it shows the menu to whether to start in safe mode ... network mode ... normally or lastest know good windows start ....
    when it starts for the second time it works fine, it does this all the time and now i'm reinstalling windows for the 2nd time (factory-state) any solution or explanation for this issue?

    no, i didn't, nothing connected to it yet.
    what trials i did:
    i reinstalled my own windows XP and it didn't show this, but because the PowerSaver error msg. and returned back to the manufactuer state CD, and same black error occurs.
    Notices:
    1- when i do restart it doesn't happen
    2- right away after it happens and hold on the power button till it shuts down and turn it on again, and it works fine.
    3- i don't know is this has nothing to do with DVD/CD rom message comes after start up asking to disable DVD-Ram option or not? but i always answers NO
    hope these info helps you helping me :)

  • MSI R9 270X - Black Screen after Win7 logo

    Hello there.
    About a week ago I upgraded my PC, buying several components and putting it to work. Here's the specs.
    Main Board: M5A97 EVO R2.0
    Bios Version: Latest
    Video Card: MSI Radeon R9 270X TwinFrozr OC Edition 2Gb
    PSU: Don't know
    12v rail Rating of listed PSU:
    CPU: AMD FX 8350 4.0Ggz BE SkAM3+
    Memory: 8Gb Crucial Ballistix DDR3-1600Mhz
    SSD/ HDD: Western Digital WD10EZRX-00A8LB0 1TB
    CPU COOLER: The one that came with the CPU
    Raid Card: Onboard
    Sound Card: Onboard
    OC: (Yes / No) Don't know
    Operating System: Win 7 SP 1 64
    So, it worked just fine for about 3 days. Last Saturday night I tried to open Google Chrome after some gaming and the the system froze. I got a screen with vertical black and white stripes. I had to reboot the system and it gave me a black screen, crashing again, after the Win Logo at start up. At this time I was running either 14.7 or 14.9 ATI drivers.
    I could only start the PC on Safe Mode. Removing the drivers and getting Windows general VGA card settings would allow me to use Windows in normal mode though. Once I installed the Graphic Card's drivers it crashed on reboot, always with the black screen after Win logo. I installed several ATI drivers, namelly 14.9, 14.11 beta, 13.12... and nothing worked.
    I flashed the Mother Board BIOS to the latest version, formatted the HDD doing a fresh install of Win 7, installed Catalyst first and then the drivers, the drivers without catalyst, etc. and nothing worked, always getting a black sreen on reboot once the Graphic Card's drivers were installed. I even swapped the Graphic Card to a different slot to no avail.
    Right now I'm using my old Radeon HD 5670 with the latest drivers and everything works just fine. It even works fine if I keep both Graphic Cards installed with the monitor plugged to the older card. I find this odd since to do so, Windows loads both cards drivers with no errors. But once I switch to the new card everything goes black.
    Can someone help me out? I've tried to contact my vendor's technical support through mail but they're not answering. I fear that I'll have to report it as DOA and swap it out, which will take quite some time taking into consideration the way things tend to work around here.
    EDIT - I don't have a 2nd system to test it on.

    Nope. Not driver issue at all. I tested at least 3 different drivers, all with the same result. Besides, I used both Driver Fusion and Driver Cleaner and CClean to remove any non-deleted registry entries. Always got the same problem. Went as far as formating the drive and doing a clean Win install. The problem persisted.
    Tried installing drivers without Catalyst to no avail. Tried installing Cataltst first and then the drivers. Nothing. It always crashed omce the drivers were installed.

Maybe you are looking for

  • Not receiving the output xml file from BPM

    Hello I am doing a scenario where I'd be sending two files in text format to the BPM workflow which would be using Fork and Correlation to merge these two files into one file and send the output xml file as receiver. Problem is that the two files are

  • No same values in same field

    I want to build table with constraint prevent specific field from duplicate his values .... I don't want that constraint be primary key , I want any constraint else to make what i want.

  • Can I restore My new ipad air like My old ipad2

    I need to know if is posible to restore My new ipad Air like My old ipad, i mean the security copy up load to the new!

  • Has anyone tried the Malware checker/remover by etresoft?

    Was just wondering if anyone else had tried the Malware checker by etresoft? It is posted here: https://discussions.apple.com/docs/DOC-3271 What kind of experience did you have? I posted this: etresoft -- I downloaded and now have run your malware ch

  • All-Flash Storage: Accelerated Performance, Yes, but Is It Enterprise-Grade?

    August 2015 Explore All-Flash Vendors Should Meet These Criteria Here's our checklist to help you evaluate the enterprise-grade capabilities of all-flash storage solutions you may be considering. It helps you assess what you should be most concerned