Satellite C660 - Cannot start Face Recognition software

When I try and run the face recognition software I get a window saying to contact my administrator - I have administration status on the the Satellite C660 laptop.
Forum searches I have found have not helped in that any time I try and follow advice I still get the same message. The laptop is new.

Hi Sorry but I seem to have mixed up my username and password and had to create a new one LY2! This has taken longer to reply than I had hoped.
I have not tried either of the two suggestions so far but wonder, from your comments, if the problem is that I have used Windows Easy Transfer to copy information and profiles from my old laptop. I therefore am not using factory default settings, nor am I sure how to do so without losing the transferred files. My old laptop, and desktop from which I also copied files, were Windows XP. Because of the File Transfer I do log in using windows log on a password

Similar Messages

  • Cannot use face regonition software

    Hello!
    I hope someone could help me...my laptop is new and I bought him and I want use the face recognition, but the error message says : I have no rights...I should contact my administrator??????
    I am the admin!!! I even started the program with admin rights...it goes further but same error message them..
    Any solutions?
    Thx
    Peter...Munich Germany

    Hi
    One question: what notebook model you have?
    I think there is an problem with registry.
    Usually the new installation of face recognition software should resolve this issue.
    An similar problem had the user in this thread:
    http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=66107
    New installation solve this so try that out.
    Good luck

  • Why am i unable to use face recognition software using youcam5

    why am i unable to use face recognition software using youcam5 cyberlink software

    Hi,
    Is this of any help?
    http://www.davidebarranca.com/2013/02/how-to-open-and-retouch-hasselblad-3f-scanner-files- in-photoshop-cs6/

  • Face Recognition software for Lenovo G580

    I have Lenovo G580. I want face recognition software. is it available for this model? if yes please provide link.
    thanks in advance
    Solved!
    Go to Solution.

    hi firozmkhatri,
    Your issue might be similar to this thread.
    Try one of these links for the Lenovo Veriface (face recognition software):
    VeriFace                   VeriFace
    cavf20ww.exe          IN12STW61WW5.exe
    161 MB                     139 MB
    Let me know your findings.
    Cheers 
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Face recognition software for 3000 N200?

    Hello 
    i recently bought a Lenovo 3000 N200. i'd like to ask if anyone of you have tried using a face recognition software with it? i have downloaded banana face, and it works fine but i'd be more glad if i can use any of face recognition software from the
    manufacturer.
    regards

    hi firozmkhatri,
    Your issue might be similar to this thread.
    Try one of these links for the Lenovo Veriface (face recognition software):
    VeriFace                   VeriFace
    cavf20ww.exe          IN12STW61WW5.exe
    161 MB                     139 MB
    Let me know your findings.
    Cheers 
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Satellite C670-17G - cannot use face recognition

    i have Satellite C670-17G
    i have found preinstalled on my laptop the face recognition.i wonna youse it.
    i think i have updated the drivers...
    i have try the link.but it wont help me.

    Do you use your notebook with original preinstalled OS (WIN7 64BIT HOME PREMIUM)?
    Sorry but I dont understand why you cannot use it.
    Can you start this application or not? What is the problem?
    Is webcam recognized and installed properly in device manager?

  • How to update the new Face recognition software

    The first alert from Tempro when I switched on new computer was to update to a newer version of Face recognition.
    I downloaded and unzipped file ok but it won't install until I have uninstalled previous version but I cannot see how to do this.
    Any help appreciated
    pb

    Hi
    First of all the Tempro alert is only a notification that a new update is available but this doesnt mean that you HAVE TO update it.
    If you have no problems with your notebook and software then I would not update anything.
    I follow always this recommendation; never change a running system ;)
    However, I presume you need to remove the old version before the new could be installed.
    You could remove the tool from the Software area which can be found in control panel.
    But as I said; its not necessary if everything is ok.
    Bye

  • Re: Face recognition software and Win XP

    Hello.
    Is there any software for face recognition but not for Windows Vista?
    I am about to change my system to XP and I would like to use this utility.

    Sorry but I do not use such software. To be honest I do not like it. I protect my notebook with password and it is enough for me. Lets see if someone else can recommend some good working software.
    Good luck!

  • Re: Satellite C660 - Fan starts then stops

    Hello
    Sorry for my English I am French, I have a laptop Toshiba Satellite C660 few days ago and I noticed that the fan starts and stops every minute at all times, when temperatures exceed about 40 degrees (noted with SpeedFan).
    Even if I'm just the office, the Internet. However it does not heat much. Is this normal?
    Before I had a laptop and the fan did not stop but almost never had little noisy. I prefer that way, but this is can be a simple matter of habit for the Toshiba ...?

    it is not normal at all. it goes on and off about every 30 seconds! it is downright disturbing! it drives me nuts!
    by the way, people have already complained in may 2011 about it:
    http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=59733
    i upgraded the bios to version 1.4 and nothing has changed. and NO, changing anything within the power options does not make it any better.
    do we have to ask for help by this gentleman?
    "fan speeds are set in BIOS and BIOS causes the fan of Satellite L670 to be too noisy for no reason. it is very important to cool the CPU-GPU down but Satellite L670 doesnt do it efficiently as Sat L670 uses a 0/1 approach. i have modified BIOS of Sat L670 and it is much less noisy now and temperature usually does not rise. when temperature rises then the fan works full speed of course. but thats not often. you can write me an email if you would like to know more [email protected]"
    TOSHIBA we need SOLUTIONS, not words!
    thanks for your help.

  • Satellite L650 - Cannot start the Office 2010 - icon has changed

    I have a new Satellite L650.
    Using the Office 2010 icon on the desktop and my software code I installed the program.
    Now I can't find it and the changed office icon says only for use for installed programs.
    Where is it? Not in the listed programs.

    Hi mate
    Office is a package which contains several single applications like MS Word, Outlook, etc... so you will not be able to start Office clicking on Office icon.
    If you want to start MS Word for example, then you will need to choose this software.
    Usually you could find this going to Start button -> All Programs -> MS Office.

  • Satellite C660 -cannot boot from ODD

    hi all
    hope someone can help me with this.
    I'm trying to put a new hard drive in a C660 but cannot get to the 'boot from cd' option no matter what i do.
    If i press F2 i get the windows boot manager with one option.
    Windows 7
    If i go to F8 i get Advanced boot options.
    Safe mode ect. No CD option
    F12 takes me to Windows error recovery with 2 options
    Launch setup repair ( recommended )
    Start windows normally
    Also tried 0 on powerup, that just gives F2 and F12 options.
    Can anyone tell me how to get to boot from the cd?
    many thanks

    I have the samete laptop but I have faced diffirent problem.
    My problem was the computer does not starts when I turn on it will show me the notfication of "toshiba leading innovation " and it authomaticaly blinking again and again with out opening.
    I have tried to reboot from cd by F12 and selection cd/dvd option then it does not show any thing rather it will load files and finally "black screen and cursor "
    Please please I need help .
    I am exchange student in FInland from ethiopia , africa. I cant do my exercise and read help help

  • Satellite L50 - cannot start webcam

    hello!
    i have a Satellite L50 and i can't open my camera.
    It says "to start, connect a camera"
    does anybody knpws where i can find the drivers or what to do with this??
    thanks!!

    In order to use webcam, you have to use the Win 8.1 webcam app.
    But you should also check the webcam access privacy settings.
    You will find this under PC settings -> Pivacy -> webcam
    Please check also the helpful Microsoft page about the internal Win 8.1 webcam
    http://windows.microsoft.com/en-us/windows-8/camera-app-faq

  • Cannot start HP Printing Software (HP OfficeJet Pro 8500 A910a)

    Hello,
    When I doubleclick on the HP Software icon on my desktop strange behavior results. Nothing opens and my computer behaves erratically. After quite a while I get the following error messages:
    instancefinderdlg.exe
    werfault.exe
    Then, after this - my computer sort of reboots all by itself. But not a full reboot - it just goes back to the initial logon screen and I re-enter my Windows password, and the desktop shows.
    I am running Windows 8.1 Pro (64 bit). The printer is set up to operate wirelessly. 
    After doubleclicking on the HP Software icon and waiting a long time for the software to open, as I mentioned above, one thing I tried was a ctrl-alt-del and opened Task Manager. I checked the services running and there was multiple instances of an HP service running (I don't recall the name but there seemed to be dozens of the same HP service running).
    I also completely uninstalled all HP software using Revo Uninstaller, and then re-installed the complete software / driver package for the OfficeJet Pro 8500 A910a - but this did not make any difference; exactly the same problems ocurred again. 
    This has only happened in recent days. Prior to this I was able to doubleclick on the HP software icon and the software opened normally and I was able to check settings, ink levels, etc. Interestingly, the printer still seems to function well - I can print from Word, print photos from Lightroom, etc. I just can't open the HP Printer Software from my desktop.
    Any help would be greatly appreciated. Thank you!
    This question was solved.
    View Solution.

    Hello again,
    I tried the first part but it did not work.
    However, the second more detailed part (with the 9 steps), appears to have worked! I now can double-click on the HP Printer icon and everthing functions as it used to previously.
    I would like to take this opportunity to thank you very, very much! You have been very patient with me as a customer and very persistent and determined to find a solution. Over the course of several days you suggested various possible solutions. When something did not work, you did not give up but continued to search for a solution. You really are a very fine example of what customer service should be. You deserve a big raise! Thanks again.
    Regards,
    J D Sallows

  • Face recognition software

    can i install lenovo veriface on my laptop g580......the download link for the software in the lenovo center dosenot work correctly,,,,,,http://support.lenovo.com/en_IN/downloads/detail.page?DocID=DS012636.....it downloads the file but the file is corrupted.....
    Solved!
    Go to Solution.

    hi shaswat,
    Can you try one of the following links:
    VeriFace                   VeriFace
    cavf20ww.exe          IN12STW61WW5.exe
    161 MB                     139 MB
    Let me know your findings.
    Cheers 
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Satellite A300 - Cannot start Windows and cannot repair it

    hey
    first i must say my englisch is not the best ;)
    But i hope u undersrand my problem and can help me plz
    Today i bought a A300 notebook
    I have formatiert the second hard drive
    Now i can start windows and i can't repair my system and install new windows
    Please help me !!!!!
    and sorry again for my bad englisch ^^

    To be honest I dont understand your question
    If you have formatted the second HDD this should not be a problem to start Windows.
    Have you burned the recovery disk? Then boot from it and install the notebook.

Maybe you are looking for

  • HOW TO SCHEDULE A JOB TO RUN EVERY 30 MINS WITHOUT USING SCHEDULAR?

    Hi, I have a requirement where i need to schedule the job to run every 30 mins for 10 am to 10 pm. I ran into problems using odi schedular. Let me tell you what i did.. i have chosen the active mode between 10 am to 10 pm selected on startup/simple.

  • Can I install a SSD in a ENVY 14t-1100

    I am looking to replace the HDD that I have installed in my ENVY 14t-1100.  Can I replace the drive with a SSD?  The laptop is roughly 3 years old. I would like to replace it with at least a 500 gb SSD. thanks for the replies. This question was solve

  • Document upload in FORMS

    Hi, we are using Oracle EBS R 12.0.4 in HP-UX B 11.23. My question is is there any max size for the doucument that we can upload in a form.Also what are the type of document that i can upolad in a form. Can anybody specify any metalink document that

  • Windows 7 Professional -- Which Version?

    I noticed there are many versions of Windows 7 Pro on Newegg.  I know I need to get 64 bit, but do I buy the full version or the "OEM for system builders". Is the version at this link what I want? http://www.newegg.com/Product/Product.aspx?Item=N82E1

  • Can i use apple tv here in the philippines?

    can i use apple tv here in the philippines?